The Modified Multiple Model Switching Tuning Control Application in AVC

In the complex mechanical vibration environment, the dominant frequency of the system varies remarkably and swiftly under various running conditions, which also characterizes uncertainty and time-variation. It is very impending and important to suppress or isolate the detrimental vibrations related to the above memtoned system with active vibration control (AVC) technology. This paper presented the improved linear quadratic gaussian (LQG) control scheme with a specified filter to realize broadband disturbance/noise attenuation and assure intensive suppression of vibration at the key vibration frequency, then applies and modifies the multiple model switching tuning (MMST) control method by disturbance observation to track the variation of dominant vibration component timely. The effectiveness and superiority of the presented control method were demonstrated by numerical simulation and AVC experiment on a flexible cantilever beam under sweeping excitation.

Stability of multiple fans in mine ventilation networks

In large mines,single fan is usually not enough to ventilate all the working areas.Single mine-fan approach cannot be directly applied to multiple-fan networks because the present of multiple pressures and air quantities associated with each fan in the network.Accordingly,each fan in a multiple-fan system has its own mine characteristic curve,or a subsystem curve.Under some consideration,the conventional concept of a mine characteristic curve of a single-fan system can be directly extended to that of a particular fan within a multiple-fan system.In this paper the mutual effect of the fans on each other and their effect on the stability of the ventilation network were investigated by Hardy Cross algorithm combined with a switching-parameters technique.To show the validity and reliability of this algorithm,the stability of the ventilation system of Abu-Tartur Mine(one of the largest underground mine in Egypt)has been studied.

A Stable Switch Method Based on Fusion in Uncalibrated Visual Servoing

Stable switch control between multiple cameras for uncalibrated visual servoing was studied. Switch images based on fusion were presented to get the continuous dynamic image Jacobian matrix among robots and distributed visual sensors. The designed fusion algorithm is suitable to have dynamically adjustable fusion weights, and the fusion structure was analyzed. Simulations and experiments without any knowledge of mobile robots and uncalibrated visual sensors show that the method has higher adaptability than the traditional instant switch control method. The method can enhance the system stability at the switching process.

Trichromatic phase manipulation of the response of a two-level medium to an arbitrarily intense probe field

The phase dependence and independence of the response of a trichromatieally driven two-level medium to an arbitrarily intense probe field have been studied. The sum of the relative phases of the sideband components of the trichromatic field compared to the central component plays a crucial role in the response of the medium. For a weak probe field, as the sum of the relative phases changes from 0 to π, multiple switching can be achieved, in which switching from normal to anomalous dispersion occurs in multiple separate frequency regimes. The remarkable dependence on the sum phase is also shown for a strong probe field. On the other hand, when the sum of the two relative phases is fixed, the changes in the respective phases have no influence on the response of the medium.

Distributed cooperative guidance for multiple missiles with fixed and switching communication topologies

This study investigates cooperative guidance problems for multiple missiles with fixed and switching directed communication topologies. A two-step guidance strategy is proposed to realize the simultaneous attack. In the first step, a distributed cooperative guidance law is designed using local neighboring information for multiple missiles to achieve consensus on range-to-go and leading angle. The second step begins when the consensus of multiple missiles is realized. During the second step, multiple missiles disconnect from each other and hit the target using the proportional navigation guidance law. First, based on the local neighboring communications, a sufficient condition for multiple missiles to realize simultaneous attack with a fixed communication topology is presented, where the topology is only required to have a directed spanning tree. Then,the results are extended to the case of switching communication topologies. Finally, numerical simulations are provided to validate the theoretical results.

Analysis of robust stability for switched systems with multiple time-delays

The sufficient conditions of delay-dependent exponential stability for switched systems and robust exponential stability for uncertain switched systems with two time-delays are presented by using average dwell time method and free-weighting matrix method.The interaction between different time-delays is considered.The sufficient conditions do not need that every subsystem is stable.The designed methods of the switching law are also given.The sufficient conditions are given in the form of linear matrix inequalities that can be solved easily.The result is proven to be valid by the simulation at last.

Active dynamic pre-protection mechanism for MPLS-TP network

The active-fault-alarm （AFA） technologies and the dynamic protection mechanism of the optical network controlled by the multi-protocol label switching transport profile （MPLS-TP） are both studied in this article. On this basis, an active dynamic pre-protection （ADPP） mechanism is proposed. This active dynamic pre-protection mechanism is allowed to establish a so called temporary protection path （TPP） for the work path before a potential fault occurs and to switch to TPP only after the fault occurs. It keeps the TPP flexibly only when it is in low- quality or fault state to realize dynamic protection even better and to achieve better resource utilization. Simulation results show that the proposed new mechanism has better performance in terms of the flexibility and the efficiency from the perspective of time.

Optical SDMA for applying compressive sensing in WSN

In order to apply compressive sensing in wireless sensor network, inside the nodes cluster classified by the spatial correlation, we propose that a cluster head adopts free space optical communication with space division multiple access, and a sensor node uses a modulating retro-reflector for communication. Thus while a random sampling matrix is used to guide the establishment of links between head cluster and sensor nodes, the random linear projection is accomplished. To establish multiple links at the same time, an optical space division multiple access antenna is designed. It works in fixed beams switching mode and consists of optic lens with a large field of view（FOV）, fiber array on the focal plane which is used to realize virtual channels segmentation, direction of arrival sensor, optical matrix switch and controller. Based on the angles of nodes＇ laser beams, by dynamically changing the route, optical matrix switch actualizes the multi-beam full duplex tracking receiving and transmission. Due to the structure of fiber array, there will be several fade zones both in the focal plane and in lens＇ FOV. In order to lower the impact of fade zones and harmonize multibeam, a fiber array adjustment is designed. By theoretical, simulated and experimental study, the antenna＇s qualitative feasibility is validated.

Global Disturbance Rejection of Switched Nonlinear Systems with Switched Internal Model

This paper investigates the problem of global disturbance rejection for a class of switched nonlinear systems where the solvability of the disturbance rejection problem for subsystems is not assumed. The disturbances are assumed to be sinusoidal with completely unknown frequencies, phases and amplitudes. First, as an extension of the classic concept of internal model for non-switched systems, a switched internal model is proposed. Second, in order to solve the problem under study, an adaptive control method is established on the basis of the multiple Lyapunov functions method. Also,adaptive state-feedback controllers of subsystems are designed and incorporated with a switching law to asymptotically reject the unknown disturbances. Finally, an example is provided to demonstrate the effectiveness of the proposed design method.

An all-optical matrix multiplication scheme with non-linear material based switching system

Optics is a potential candidate in information, data, and image processing. In all-optical data and information processing, optics has been used as information carrying signal because of its inherent advantages of parallelism. Several optical methods are proposed in support of the above processing. In many algebraic, arithmetic, and image processing schemes fundamental logic and memory operations are conducted exploring all-optical devices. In this communication we report an all-optical matrix multiplication operation with non-linear material based switching circuit.