The DRM （dynamic contact resistance measurement） in high voltage circuit breakers is a manner of evaluating the internal ageing condition of the chamber. DRM is similar to static contact resistance measurement testi...The DRM （dynamic contact resistance measurement） in high voltage circuit breakers is a manner of evaluating the internal ageing condition of the chamber. DRM is similar to static contact resistance measurement testing, but instead of measuring a single value when the breaker contacts are closed （static value）, the ohmic resistance is measured at various contact positions, from the beginning of the contact opening until a complete separation of the contacts. The relationship between the contact resistances of the new circuit breaker and the ageing circuit breaker in operation provides subsidy for the evaluation of both the main and arcing contact conditions. This research aims to analyze the correlation between the various levels of degradation of the contacts and the configuration of the DRM curve. This work considers curve samples from new acceleration tests. breaker chamber contacts and different levels of degradation by展开更多
The coal processing methods used at the Zarand coal washery plant are the heavy medium bath,jigs,and flotation.The coal-containing materials that are fed to the plant are acquired from different mines,and they have di...The coal processing methods used at the Zarand coal washery plant are the heavy medium bath,jigs,and flotation.The coal-containing materials that are fed to the plant are acquired from different mines,and they have different washability properties.In this paper,the validity of Mayer curve (M-curve),the conventional method for determining coal washability,was evaluated on blending of raw coals that are fed to the plant.Washability curves were prepared for the hand-blended samples and compared with the washability predicted by the Mayer curves.Different samples from different seams and mines were blended by hand in 50:50 ratios,and sink and float tests were performed;the resulting washability curves were in good agreement with the washability curves predicted using the Mayer method for the same blending ratio.This work resulted in the preparation of the optimum plant feed that can be achieved from the blending of different coal samples to produce the best plant yield at a given ash content.展开更多
文摘The DRM （dynamic contact resistance measurement） in high voltage circuit breakers is a manner of evaluating the internal ageing condition of the chamber. DRM is similar to static contact resistance measurement testing, but instead of measuring a single value when the breaker contacts are closed （static value）, the ohmic resistance is measured at various contact positions, from the beginning of the contact opening until a complete separation of the contacts. The relationship between the contact resistances of the new circuit breaker and the ageing circuit breaker in operation provides subsidy for the evaluation of both the main and arcing contact conditions. This research aims to analyze the correlation between the various levels of degradation of the contacts and the configuration of the DRM curve. This work considers curve samples from new acceleration tests. breaker chamber contacts and different levels of degradation by
基金supports for this work that were received from the Zarand coal washing R&D center and Science and Research Branch (Tehran) of Islamic Azad University
文摘The coal processing methods used at the Zarand coal washery plant are the heavy medium bath,jigs,and flotation.The coal-containing materials that are fed to the plant are acquired from different mines,and they have different washability properties.In this paper,the validity of Mayer curve (M-curve),the conventional method for determining coal washability,was evaluated on blending of raw coals that are fed to the plant.Washability curves were prepared for the hand-blended samples and compared with the washability predicted by the Mayer curves.Different samples from different seams and mines were blended by hand in 50:50 ratios,and sink and float tests were performed;the resulting washability curves were in good agreement with the washability curves predicted using the Mayer method for the same blending ratio.This work resulted in the preparation of the optimum plant feed that can be achieved from the blending of different coal samples to produce the best plant yield at a given ash content.
