Effects of interlayer composition on bonding strength and interfacial microstructure of green joined CePO_4-ZrO_2 ceramics were studied. Green bodies of 25%CePO_4/ZrO_2 and ZrO_2 ceramics were joined by using interlay...Effects of interlayer composition on bonding strength and interfacial microstructure of green joined CePO_4-ZrO_2 ceramics were studied. Green bodies of 25%CePO_4/ZrO_2 and ZrO_2 ceramics were joined by using interlayer composed of CePO_4 and ZrO_2 at 1450 ℃ for 120 min without applied pressure.The effects of CePO_4/(CePO_4+ZrO_2) ratio on the bond strength of the joints were investigated. Under the experimental conditions, the grain size of the particles grown in the joint is smaller than those in joined ceramics. The microstructure of the joint is more homogeneous than that of the matrix and without obvious cracks, pores and other defects.展开更多
The partially stabilized ZrO2 (PSZ) particles were introduced into TiB2 ceramics to improve its density and mechanical properties. The results show that the addition of PSZ is very effective not only in bettering the ...The partially stabilized ZrO2 (PSZ) particles were introduced into TiB2 ceramics to improve its density and mechanical properties. The results show that the addition of PSZ is very effective not only in bettering the sinterability but also in enhancing the flexural strength and fracture toughness of TiB2.展开更多
Synthetic zircon(ZrSiO_(4))ceramics are typically fabricated at elevated temperatures(over 1500℃),which would lead to high manufacturing cost.Meanwhile,reports about preparing ZrSiO_(4)-based ceramic composites via c...Synthetic zircon(ZrSiO_(4))ceramics are typically fabricated at elevated temperatures(over 1500℃),which would lead to high manufacturing cost.Meanwhile,reports about preparing ZrSiO_(4)-based ceramic composites via controlling the solid-state reaction between zirconia(ZrO_(2))and silica(SiO_(2))are limited.In this work,we proposed a low-temperature strategy to flexibly design and fabricate ZrSiO_(4)-based ceramic composites via doping and tuning the solid-state reaction.Two ceramic composites and ZrSiO_(4) ceramics were in-situ prepared by reactive fast hot pressing(FHP)at approximately 1250℃ based on the proposed strategy,i.e.,a ZrSiO_(4)-SiO_(2) dual-phase composite with bicontinuous interpenetrating and hierarchical microstructures,a ZrSiO_(4)-ZrO_(2) dual-phase composite with a microstructure of ZrO_(2) submicron-and nano-particles embedded in a micron ZrSiO_(4) matrix,and ZrSiO_(4) ceramics with a small amount of residual ZrO_(2) nanoparticles.The results showed that the phase compositions,microstructure configurations,mechanical properties,and wear resistance of the materials can be flexibly regulated by the proposed strategy.Hence,ZrSiO_(4)-based ceramic composites with different properties can be easily fabricated based on different application scenarios.These findings would offer useful guidance for researchers to flexibly fabricate ZrSiO_(4)-based ceramic composites at low temperatures and tailor their microstructures and properties through doping and tuning the solid-state reaction.展开更多
文摘Effects of interlayer composition on bonding strength and interfacial microstructure of green joined CePO_4-ZrO_2 ceramics were studied. Green bodies of 25%CePO_4/ZrO_2 and ZrO_2 ceramics were joined by using interlayer composed of CePO_4 and ZrO_2 at 1450 ℃ for 120 min without applied pressure.The effects of CePO_4/(CePO_4+ZrO_2) ratio on the bond strength of the joints were investigated. Under the experimental conditions, the grain size of the particles grown in the joint is smaller than those in joined ceramics. The microstructure of the joint is more homogeneous than that of the matrix and without obvious cracks, pores and other defects.
文摘The partially stabilized ZrO2 (PSZ) particles were introduced into TiB2 ceramics to improve its density and mechanical properties. The results show that the addition of PSZ is very effective not only in bettering the sinterability but also in enhancing the flexural strength and fracture toughness of TiB2.
基金the financial support of the National Natural Science Foundation of China(52102084)Natural Science Foundation of Hunan Province(2022JJ30718)+1 种基金the financial support of the Youth Innovation Promotion Association Chinese Academy of Sciences(CAS)(2022428)the Science Fund of Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing(AMGM2021A08).
文摘Synthetic zircon(ZrSiO_(4))ceramics are typically fabricated at elevated temperatures(over 1500℃),which would lead to high manufacturing cost.Meanwhile,reports about preparing ZrSiO_(4)-based ceramic composites via controlling the solid-state reaction between zirconia(ZrO_(2))and silica(SiO_(2))are limited.In this work,we proposed a low-temperature strategy to flexibly design and fabricate ZrSiO_(4)-based ceramic composites via doping and tuning the solid-state reaction.Two ceramic composites and ZrSiO_(4) ceramics were in-situ prepared by reactive fast hot pressing(FHP)at approximately 1250℃ based on the proposed strategy,i.e.,a ZrSiO_(4)-SiO_(2) dual-phase composite with bicontinuous interpenetrating and hierarchical microstructures,a ZrSiO_(4)-ZrO_(2) dual-phase composite with a microstructure of ZrO_(2) submicron-and nano-particles embedded in a micron ZrSiO_(4) matrix,and ZrSiO_(4) ceramics with a small amount of residual ZrO_(2) nanoparticles.The results showed that the phase compositions,microstructure configurations,mechanical properties,and wear resistance of the materials can be flexibly regulated by the proposed strategy.Hence,ZrSiO_(4)-based ceramic composites with different properties can be easily fabricated based on different application scenarios.These findings would offer useful guidance for researchers to flexibly fabricate ZrSiO_(4)-based ceramic composites at low temperatures and tailor their microstructures and properties through doping and tuning the solid-state reaction.
