REFINEMENTS OF THE NORM OF TWO ORTHOGONAL PROJECTIONS

In this paper,some refinements of norm equalities and inequalities of combination of two orthogonal projections are established.We use certain norm inequalities for positive contraction operator to establish norm inequalities for combination of orthogonal projections on a Hilbert space.Furthermore,we give necessary and sufficient conditions under which the norm of the above combination of o`rthogonal projections attains its optimal value.

Optimal Design of High-Speed Partial Flow Pumps using Orthogonal Tests and Numerical Simulations

To investigate the influence of structural parameters on the performances and internal flow characteristics of partial flow pumps at a low specific speed of 10000 rpm,special attention was paid to the first and second stage impeller guide vanes.Moreover,the impeller blade outlet width,impeller inlet diameter,blade inclination angle,and number of blades were considered for orthogonal tests.Accordingly,nine groups of design solutions were formed,and then used as a basis for the execution of numerical simulations(CFD)aimed at obtaining the efficiency values and heads for each design solution group.The influence of impeller geometric parameters on the efficiency and head was explored,and the“weight”of each factor was obtained via a range analysis.Optimal structural parameters were finally chosen on the basis of the numerical simulation results,and the performances of the optimized model were verified accordingly(yet by means of CFD).Evidence is provided that the increase in the efficiency and head of the optimized model was 12.11%and 23.5 m,respectively,compared with those of the original model.

Dynamically enhanced Autler–Townes splitting by orthogonal XUV fields

Based on numerical solutions of the time-dependent Schr ¨odinger equation, we theoretically investigate the photoelectron spectrum of hydrogen atoms ionized by a pair of ultrashort, intense, and orthogonally polarized laser pulses with a relative time delay in a pump–probe configuration. The pump pulse resonantly excites electrons from the 1s and 2p levels,inducing Rabi oscillations. The resulting dynamically enhanced Autler–Townes(AT) splitting is observed in the photoelectron energy spectrum upon interaction with the second probe pulse. In contrast to the previous parallel-polarization scheme, the proposed orthogonal-polarization configuration enables the resolution of dynamically enhanced AT splitting over a considerably wider range of probe photon energies.

Manipulating the electron dynamics in the non-sequential double ionization process of Ar atoms by an orthogonal two-color laser field

Electron dynamics during non-sequential double ionization(NSDI) is one of the most attractive areas of research in the field of laser–atom or laser–molecule interaction. Based on the classic two-dimensional model, we study the process of NSDI of argon atoms driven by a few-cycle orthogonal two-color laser field composed of 800 nm and 400 nm laser pulses. By changing the relative phase of the two laser pulses, a localized enhancement of NSDI yield is observed at 0.5πand 1.5π, which could be attributed to a rapid and substantial increase in the number of electrons returning to the parent ion within extremely short time intervals at these specific phases. Through the analysis of the electron–electron momentum correlations within different time windows of NSDI events and the angular distributions of emitted electrons in different channels, we observe a more pronounced electron–electron correlation phenomenon in the recollision-induced ionization(RII) channel. This is attributed to the shorter delay time in the RII channel.

Optimization of Center of Gravity Position and Anti-Wave Plate Angle of Amphibious Unmanned Vehicle Based on Orthogonal Experimental Method

When the amphibious vehicle navigates in water,the angle of the anti-wave plate and the position of the center of gravity greatly influence the navigation characteristics.In the relevant research on reducing the navigation resistance of amphibious vehicles by adjusting the angle of the anti-wave plate,there is a lack of scientific selection of parameters and reasonable research of simulation results by using mathematical methods,and the influence of the center of gravity position on navigation characteristics is not considered at the same time.To study the influence of the combinations of the angle of the anti-wave plate and the position of the center of gravity on the resistance reduction characteristics,a numerical calculation model of the amphibious unmanned vehicle was established by using the theory of computational fluid dynamics,and the experimental data verified the correctness of the numerical model.Based on this numerical model,the navigation characteristics of the amphibious unmanned vehicle were studied when the center of gravity was located at different positions,and the orthogonal experimental design method was used to optimize the parameters of the angle of the anti-wave plate and the position of the center of gravity.The results show that through the parameter optimization analysis based on the orthogonal experimental method,the combination of the optimal angle of the anti-wave plate and the position of the center of gravity is obtained.And the numerical simulation result of resistance is consistent with the predicted optimal solution.Compared with the maximum navigational resistance,the parameter optimization reduces the navigational resistance of the amphibious unmanned vehicle by 24%.

Optimization of short-circuit transition parameters of Q235B steel GMAW based on orthogonal gray relational analysis

In gas metal arc welding(GMAW)process,the short-circuit transition was the most typical transition observed in molten metal droplets.This paper used orthogonal tests to explore the coupling effect law of welding process parameters on the quality of weld forming under short-circuit transition,the design of 3 factors and 3 levels of a total of 9 groups of orthogonal tests,welding current,welding voltage,welding speed as input parameters:effective area ratio,humps,actual linear power density,aspect ratio,Vickers hardness as output paramet-ers(response targets).Using range analysis and trend charts,we can visually depict the relationship between input parameters and a single output parameter,ultimately determining the optimal process parameters that impact the single output index.Then combined with gray the-ory to transform the three response targets into a single gray relational grade(GRG)for analysis,the optimal combination of the weld mor-phology parameters as follows:welding current 100 A,welding voltage 25 V,welding speed 30 cm/min.Finally,validation experiments were conducted,and the results showed that the error between the gray relational grade and the predicted value was 2.74%.It was observed that the effective area ratio of the response target significantly improved,validating the reliability of the orthogonal gray relational method.

Optimization of Extraction Process of Fagopyri Dibotryis Rhizoma by Orthogonal Experiment

[Objectives]To optimize the water extraction process of Fagopyri Dibotryis Rhizoma.[Methods]The entropy weight method was used to determine the weight of epicatechin extraction rate and dry extract rate and calculate the comprehensive score.The water extraction process of Fagopyri Dibotryis Rhizoma was optimized by orthogonal design with the comprehensive score as the indicator and the amount of water,extraction time and extraction times as the factors.[Results]The optimum extraction process of Fagopyri Dibotryis Rhizoma was as follows:adding 10 times of water,extracting 3 times,and extracting for 60 min each time.[Conclusions]The optimized extraction process is stable and feasible,and can be used for the extraction of Fagopyri Dibotryis Rhizoma.

Steering the energy sharing of electrons in nonsequential double ionization with orthogonally polarized two-color field

Using the semiclassical ensemble model,the dependence of relative amplitude for the recollision dynamics in nonsequential double ionization(NSDI)of neon atom driven by the orthogonally polarized two-color field(OTC)laser field is theoretically studied.And the dynamics in two typical collision pathways,recollision-impact-ionization(RII)and recollisionexcitation with subsequent ionization(RESI),is systematically explored.Our results reveal that the V-shaped structure in the correlated momentum distribution is mainly caused by the RII mechanism when the relative amplitude of the OTC laser field is zero,and the first ionized electrons will quickly skim through the nucleus and share few energy with the second electron.As the relative amplitude increases,the V-shaped structure gradually disappears and electrons are concentrated on the diagonal in the electron correlation spectrum,indicating that the energy sharing after electrons collision is symmetric for OTC laser fields with large relative amplitudes.Our studies show that changing the relative amplitude of the OTC laser field can efficiently control the electron–electron collisions and energy exchange efficiency in the NSDI process.

TAYLOR SERIES AND ORTHOGONALITY OF THE OCTONION ANALYTIC FUNCTIONS

The Taylor series of the Octonion analytic function is given. And the orthogonal formula for the Octonion analytic functions is also obtained.

On Frequency Sensitivity and Mode Orthogonality of Flexible Robotic Manipulators

This paper presents sensitivity analysis of vibration frequencies of flexible manipulators with respect to variations of systems parameters such as rotational inertia of hub, and mass, moment, and side of tip load. Both Euler-Bernoulli and Timoshenko dynamical models of flexible manipulators are discussed. By using variational method, sensitivity indices are obtained with explicit expressions for measuring the sensitivity of frequencies. Based on variational formulations, a novel method for deriving the orthogonal relations among vibration modal shape functions of flexible manipulators is introduced. With this method, the orthogonal relations can be derived easily without invoking the tedious process of differentiation and integration by part, as commonly used in their derivation. © 2014 Chinese Association of Automation.

A DYNAMICAL SYSTEM ALGORITHM FOR SOLVING A LEAST SQUARES PROBLEM WITH ORTHOGONALITY CONSTRAINTS

This paper introduced a dynamical system (neural networks) algorithm for solving a least squares problem with orthogonality constraints, which has wide applications in computer vision and signal processing. A rigorous analysis for the convergence and stability of the algorithm was provided. Moreover, a so called zero extension technique was presented to keep the algorithm always convergent to the needed result for any randomly chosen initial data. Numerical experiments illustrate the effectiveness and efficiency of the algorithm.

The effect of wave function orthogonality on the simultaneous ionization and excitation of helium

Within the framework of the first-order Born approximation, the triple differential cross sections （TDCSs） for simultaneous ionization and excitation of helium are calculated. The wave function of the ejected electron is chosen to be orthogonal or non-orthogonal to the wave function of the bound electron before ionization. It is found that the orthogonality has a strong effect on the TDCS, especially when plane waves and Coulomb waves are used to describe the projectile and the ejected electron.

Orthogonality of inductosyn angle-measuring system error and error-separating technology

Round inductosyn is widely used in inertial navigation test equipment, and its accuracy has significant effect on the general accuracy of the equipment. Four main errors of round inductosyn,i.e. the first-order long-period (360°) harmonic error, the second-order long-period harmonic error, the first-order short-period harmonic error and the second-order short-period harmonic error, are described, and the orthogonality of these four kinds of errors is studied. An error separating technology is proposed to separate these four kinds of errors, and in the process of separating the short-period harmonic errors, the arrangement in the order of decimal part of the angle pitch number can be omitted. The effectiveness of the technology proposed is proved through measuring and adjusting the angular errors.

VARIOUS NOTIONS OF ORTHOGONALITY IN NORMED SPACES

In this paper, we present various notions and aspects of orthogonality in normed spaces. Characterizations and generalizations of orthogonality are also consid- ered. Results on orthogonality of the range and the kernel of elementary operators and the operators implementing them also are given.

Projections,Birkhoff Orthogonality and Angles in Normed Spaces

Let X be a Minkowski plane, i.e., a real two dimensional normed linear space. We use projections to give a definition of the angle Aq（x, y） between two vectors x and y in X, such that x is Birkhoff orthogonal to y if and only if Aq（x,y）=π/2. Some other properties of this angle are also discussed.

A CRITERION FOR ORTHOGONALITY OF REFINABLE FUNCTIONS

In this note, a criterion for orthonormality of refinable functions via characteristic polynomial of a matrix is given.

A NOTE ON SOBOLEV ORTHOGONALITY FOR LAGUERRE MATRIX POLYNOMIALS

Abstract. Let {L（Ln^（A,λ）（x）}n≥0 be the sequence of monic Laguerre matrix polynomials defined on [0,∞） byLn^（A,λ）（x）=n!/（-λ）^n ∑nk-0（-λ）^k/k!（n-k）!（A＋I）n[（A＋I）k]^-1x^k,where A ∈ C^r×r. It is known that {Ln^（A,λ）（x）}n≥0 is orthogonal with respect to a matrix moment functional when A satisfies the spectral condition that Re（z） 〉 -1 for every z E or（a）. In this note we show that forA such that σ（A） does not contain negative integers, the Laguerre matrix polynomials Ln^（A,λ）（x） are orthogonal with respect to a non-diagonal SobolevLaguerre matrix moment functional, which extends two cases： the above matrix case and the known scalar case.

ON THE METHOD OF ORTHOGONALITY CONDITIONS FOR SOLVING THE PROBLEM OF LARGE DEFLECTION OF CIRCULAR PLATE

In this paper, we reexamine the method of successive approximation presented by Prof. Chien Wei-zangfor solving the problem of large deflection of a circular plate, and find that the method could be regarded as the method of strained parameters in the singular perturbation theory. In terms of the parameter representing the ratio of the center deflection to the thickness of the plate, we make the asymptotic expansions of the deflection, membrane stress and the parameter of load as in Ref. [1], and then give the orthogonality conditions (i.e. the solvability conditions) for the resulting equations, by which the stiffness characteristics of the plate could be determined. It is pointed out that with the solutions for the small deflection problem of the circular plate and the orthogonality conditions, we can derive the third order approximate relations between the parameter of load and the center deflection and the first-term approximation of membrane stresses at the center and edge of the plate without solving the differential equations. For some special cases (i.e. under uniform load, under compound toad, with different boundary conditiors), we deduce the specific expressions and obtain the results in agreement with the previous ones given by Chien Wei-zang, Yeh kai-yuan and Hwang Chien in Refs. [1 - 4J.

Decompositions of Symmetry Using Generalized Linear Diagonals-Parameter Symmetry Model and Orthogonality of Test Statistic for Square Contingency Tables

For square contingency tables with ordered categories, the present paper gives several theorems that the symmetry model holds if and only if the generalized linear diagonals-parameter symmetry model for cell probabilities and for cumulative probabilities and the mean nonequality model of row and column variables hold. It also shows the orthogonality of statistic for testing goodness-of-fit of the symmetry model. An example is given.

Selecting the Technology of Sodium Silicate Modified Poplar with the Highest Performance by Fuzzy Orthogonal Method

Sodium silicate modification can improve the overall performance of wood.The modification process has a great influence on the properties of modified wood.In this study,a new method was introduced to analyze the wood modification process,and the properties of modified wood were studied.Poplar wood was modified with sodium silicate by vacuum-pressure impregnation.After screening using single-factor experiments,an orthogonal experiment was carried out with solution concentration,impregnation time,impregnation pressure,and the cycle times as experimental factors.The modified poplar with the best properties was selected by fuzzy mathematics and characterized by SEM,FT-IR,XRD and TG.The results showed that some lignin and hemicellulose were removed from the wood due to the alkaline action of sodium silicate,and the orderly crystal area of poplar became disorderly,resulting in the reduction of crystallinity of the modified poplar wood.FT-IR analysis showed that sodium silicate was hydrolyzed to form polysilicic acid in wood,and structural analysis revealed the formation of Si-O-Si and Si-O-C,indicating that sodium silicate reacted with fibers on the wood cell wall.TG-DTG curves showed that the final residual mass of modified poplar wood increased from 25%to 67%,and the temperature of the maximum loss rate decreased from 343℃ to 276℃.The heat release and smoke release of modified poplar wood decreased obviously.This kind of material with high strength and fire resistance can be used in the outdoor building and indoor furniture.