Interface structure and formation mechanism of diffusion-bonded joints of TiAl-based alloy to titanium alloy

Vacuum diffusion bonding of a TiAl based alloy (TAD) to a titanium alloy (TC2) was carried out at 1 273 K for 15～120 min under a pressure of 25 MPa . The kinds of the reaction products and the interface structures of the joints were investigated by SEM, EPMA and XRD. Based on this, a formation mechanism of the interface structure was elucidated. Experimental and analytical results show that two reaction layers have formed during the diffusion bonding of TAD to TC2. One is Al rich α(Ti)layer adjacent to TC2,and the other is (Ti 3Al+TiAl)layer adjacent to TAD,thus the interface structure of the TAD/TC2 joints is TAD/(Ti 3Al+TiAl)/α(Ti)/TC2.This interface structure forms according to a three stage mechanism,namely(a)the occurrence of a single phase α(Ti)layer;(b)the occurrence of a duplex phase(Ti 3Al+TiAl)layer;and(c)the growth of the α(Ti)and (Ti 3Al+TiAl)layers.

Switching O-O bond formation mechanism between WNA and I2M pathways by modifying the Ru-bda backbone ligands of water-oxidation catalysts

Understanding the seven coordination and O-O coupling pathway of the distinguished Ru-bda catalysts is essential for the development of next generation efficient water-oxidation catalysts based on earthabundant metals.This work reports the synthesis,characterization and catalytic properties of a monomeric ruthenium catalyst Ru-bnda(H2 bnda=2,2’-bi(nicotinic acid)-6,6’-dicarboxylic acid)featuring steric hindrance and enhanced hydrophilicity on the backbone.Combining experimental evidence with systematic density functional theory calculations on the Ru-bnda and related catalysts Ru-bda(H_(2)bda=2,2’-bipyridine-6,6’-dicarboxylic acid),Ru-pda(H_(2)pda=1,10-phenanthroline-2,9-dicarboxylic acid),and Ru-biqa(H_(2)biqa=(1,1’-biisoquinoline)-3,3’-dicarboxylic acid),we emphasized that seven coordination clearly determines presence of Ru^(Ⅴ)=O with high spin density on the ORu^(Ⅴ)=O atom,i.e.oxo with radical properties,which is one of the necessary conditions for reacting through the O-O coupling pathway.However,an additional factor to make the condition sufficient is the favorable intermolecular faceto-face interaction for the generation of the pre-reactive[Ru^(Ⅴ)=O…O=Ru^(Ⅴ)],which may be significantly influenced by the secondary coordination environments.This work provides a new understanding of the structure-activity relationship of water-oxidation catalysts and their potential to adopt I2M pathway for O-O bond formation.

Double network self-healing hydrogel based on hydrophobic association and ionic bond for formation plugging

Self-healing hydrogels have attracted tremendous attention in the field of oil and gas drilling and production engineering because of their excellent self-healing performance after physical damage.In this study,a series of double network self-healing(DN_(SA))hydrogels based on hydrophobic association and ionic bond were prepared for plugging pores and fractures in formations in oil and gas drilling and production engineering.The mechanical,rheological,and self-healing properties of the DN_(SA)hydrogels were investigated.Results revealed that the DN_(SA)hydrogels exhibited excellent mechanical properties with a tensile stress of 0.67 MPa and toughness of 7069 kJ/cm^(3) owing to the synergistic effect of the double network.In addition,the DN_(SA)hydrogels exhibited excellent compression resistance,notch insensitivity,and self-healing properties.The DN_(SA)-2 hydrogel was granulated and made into gel particles with different particle sizes and used as a plugging agent.The self-healing mechanism of DN_(SA)-2 hydrogel particles in fractures was explored,and it’s plugging effect on fractures of different widths and porous media of different permeabilities were investigated.Experimental results revealed that the plugging capacity of the DN_(SA)-2 hydrogel particles for a fracture with width of 5 mm and a porous medium with a permeability of 30μm^(2) was 3.45 and 4.21 MPa,respectively,which is significantly higher than those of commonly used plugging agents in the oilfield.The DN_(SA)hydrogels with excellent mechanical and self-healing properties prepared in this study will provide a new approach for applying hydrogels in oil and gas drilling and production engineering.

Necessity of structural rearrangements for O-O bond formation between O5 and W2 in photosystemⅡ

Numerous aspects of the water oxidation mechanism in photosystemⅡhave not been fully elucidated,especially the O-O bond formation pathway.However,a body of experimental evidences have identified the O5 and W2 ligands of the oxygen-evolving complex as the highly probable substrate candidates.In this work,we studied O-O bond formation between O5 and W2 based on the native Mn4 Ca cluster by density functional calculations.Structural rearrangements before the formation of the S_(4) state were found as a prerequisite for O-O bond formation between O5 and W2,regardless if the suggested pathways involving the typical Mnl(Ⅳ)-O·species or the recently proposed Mn4(Ⅶ)(O)2 species.Possible alternatives for the S2→S_(3) and S_(3)→S_(4) transitions accounting for such required rearrangements are discussed.These findings reflect that the structural flexibility of the Mn4 Ca cluster is essential to allow structural rearrangements during the catalytic cycle.

Effect of Wetting and NiAl_2O_4 Spinel Formation on the Bonding between Al_2O_3 and Ni

Al2O3-Ni interface formed under vacuum condition is non-wetting and weak. Severe instantaneous intedecial reaction (i.e. wetting) at the Al2O3-Ni interface promoted by oxygen can create a strengthened interface. The NiAl2O4 spinel-Ni intedece is weak and growth of the spinel interphase is detrimental to the Al2O3-Ni intedecial bonding. A proper control of the oxygen partial pressure can achieve wetting while avoiding the existence of spinel at the interface, producing stronger interfaces by both mechanical interlocking and more intimate chemical bonding in an Al2O3-20 vol pct Ni composite.

A^1HNMR STUDY ON THE FORMATION AND BREAKING OF INTRAMOLECULAR HYDROGEN BONDS OF BILIRUBIN IN CDCl_3-DMSO-d_6 BINARY SOLVENT

The formation and breaking of intramolecular hydrogen bonds of bilirubin in CDCl_3-DMSO-d_6 binary solvent have been investigated by means of NMR spectroscopy.The chemical shifts of protons at dipyrrinone lactam C=O and N-H,Pyrrole N-H,C-5,C-15 and methylene groups of 8,12-propionic acid side-chains changed markedly as a function of composition of the binary solvent.The hydrogen bond formation is dependent on the conformation of propionic acid side-chains.

Transfer of disulfide bond formation modules via yeast artificial chromosomes promotes the expression of heterologous proteins inKluyveromyces marxianus

Kluyveromyces marxianus is a food-safe yeast with great potential for producing heterologous proteins.Improving the yield in K.marxianus remains a challenge and incorporating large-scale functional modules poses a technical obstacle in engineering.To address these issues,linear and circular yeast artificial chromosomes of K.marxianus(KmYACs)were constructed and loaded with disulfide bond formation modules from Pichia pastoris or K.marxianus.These modules contained up to seven genes with a maximum size of 15 kb.KmYACs carried telomeres either from K.marxianus or Tetrahymena.KmYACs were transferred successfully into K.marxianus and stably propagated without affecting the normal growth of the host,regardless of the type of telomeres and configurations of KmYACs.KmYACs increased the overall expression levels of disulfide bond formation genes and significantly enhanced the yield of various heterologous proteins.In high-density fermentation,the use of KmYACs resulted in a glucoamylase yield of 16.8 g/l,the highest reported level to date in K.marxianus.Transcriptomic and metabolomic analysis of cells containing KmYACs suggested increased flavin adenine dinucleotide biosynthesis,enhanced flux entering the tricarboxylic acid cycle,and a preferred demand for lysine and arginine as features of cells overexpressing heterologous proteins.Consistently,supplementing lysine or arginine further improved the yield.Therefore,KmYAC provides a powerful platform for manipulating large modules with enormous potential for industrial applications and fundamental research.Transferring the disulfide bond formation module via YACs proves to be an efficient strategy for improving the yield of heterologous proteins,and this strategy may be applied to optimize other microbial cell factories.

Formation Sites and Microscopic Conformation Study on the Konjac Glucomannan Molecular Helices

In this work, the formation sites, helical parameters and hydrogen bond positions of Konjac glucomannan molecular helices were investigated using molecular dynamic simulation method. To our interest, the KGM chain is mainly composed by local left and right helix struetttres. The formation sites of KGM chain might locate at the chain-segments containing acetyl groups, and the left helix is the favorable conformation of KGM. Temperature-dependent molecule conformation study indicates that the right helix is dominant when the temperature is lower than 343 K, above which, however, the left helix is dominating （right helix disappears）. In addition, intramolecular hydrogen bonds in the left helix can be found at the -OH groups on C（2）, C（4） and C（6） of mannose residues; comparably, the intramolecular hydrogen bonds in the right helix can be mainly observed at the -OH groups on C（4） and C（6） of the mannose residues and C（3） of the glucose residues. In conclusion, molecular dynamic simulation is an efficient method for the microscopic conformation study of glucomannan molecular helices.

Resultant gradient information, kinetic energy and molecular virial theorem

Resultant gradient-information is introduced and applied to problems in chemical reactivity theory. This local measure of the structural information contained in (complex) wavefunctions of electronic states is related to the system overall kinetic energy combining the modulus (probability) and phase (current) contributions. The grand-ensemble representation of thermodynamic equilibria in open systems demonstrates the physical equivalence of the variational energetic and information principles. It is used and to relate the populational derivatives of ensemble-average functionals in both these representations, which represent reactivity criteria for diagnosing the charge-transfer (CT) phenomena. Their equivalence is demonstrated by using the in situ potential and hardness descriptors to predict the direction and optimum amount of CT. The virial theorem is generalized into thermodynamic quantities and used to extract the kinetic energy component from qualitative energy profiles in the bond-formation and (exo/endo)-ergic reactions. The role of electronic kinetic energy in such chemical processes is reexamined, the virial theorem implications for the Hammond postulate of reactivity theory are explored, and variations of the structural-information in chemical processes are addressed. The maximum thermodynamic information rule is formulated and "production" of the gradient-information in chemical reactions is addressed. The Hammond postulate is shown to be indexed by the geometric derivative of resultant gradient-information at transition-state complex.

2-膦亚胺叶立德-1,4-醌类衍生物的合成

膦亚胺叶立德是一类极其重要的有机膦试剂,在有机合成中通常被用作合成中间体和小分子催化剂。膦亚胺叶立德的合成主要是通过Staudinger反应来实现。醌类化合物具有良好的生理活性和独特的氧化还原性质,近年来,其官能化的研究取得了丰富的成果,但关于含有膦亚胺基团的醌类化合物的构建的研究较少。以1,4-醌类化合物为原料,经过3步反应,以中等到良好的总收率(56%~78%)得到了5种2-三苯基膦亚胺叶立德-1,4-醌类衍生物(4a~4e),其中化合物4b~4e为新型化合物,所有产物经^(1)H NMR,^(13)C NMR,^(31)P NMR和HR-MS(ESI)确证和表征。

川中地区蓬莱气田震旦系灯影组二段储层发育主控因素及分布规律

结合岩心、薄片及分析测试等资料,对川中蓬莱气田震旦系灯影组二段储层的主控因素及分布规律进行了详细研究。研究结果表明:(1)蓬莱气田震旦系灯二段储层主要由凝块石白云岩、泡沫绵层白云岩及砂屑白云岩组成,储集空间包括孔隙、溶洞及裂缝,以残余格架孔和中小型溶洞为主,孔隙多发育于微生物黏结白云岩及颗粒白云岩中。灯二上亚段储层孔隙度为2.0%~11.0%,平均为4.43%,渗透率为0.005~10.000 mD,平均为1.190 m D;灯二下亚段储层孔隙度为2.00%~6.98%,平均为3.64%,渗透率为0.030 9~2.600 0 mD,平均为0.950 0 mD。(2)微生物丘滩体展布及准同生期岩溶作用、表生期岩溶作用共同控制了研究区灯二段储层的分布及品质,优质储层多发育于灯二上亚段中上部和灯二下亚段顶部。(3)研究区灯二下亚段总体属海进半旋回产物,仅上部发育孔洞/缝洞型储层,中部及下部储层欠发育。灯二上亚段多为海退半旋回产物,其1小层为次级海侵背景,丘滩体厚度薄,以孔隙型储层为主;2小层在海退背景下发育连片分布的丘滩体,储层厚,以孔洞型储层为主(多为Ⅱ类储层),为区内主力产气层段;3小层总体为海退晚期浅水台坪沉积,葡萄花边构造发育,岩溶改造作用较明显,储层多为缝洞叠加岩溶型储层(Ⅲ类储层)。

沙湾凹陷砂砾岩沸石胶结物与碎屑颗粒粘结差异成因分析

通过岩石薄片、扫描电镜、能谱分析等微观实验,对准噶尔盆地沙湾凹陷二叠系砂砾岩储集层中沸石胶结物类型及特征进行了分析,明确了沸石胶结物与碎屑颗粒粘结差异的机理。结果表明:上二叠统上乌尔禾组储集层中,塑性岩屑变形及偏碱性地层水使得浊沸石与碎屑颗粒的粘结性较强;下二叠统风城组储集层浊沸石在异常高压、酸性流体等条件下,与碎屑颗粒粘结程度低,而片沸石由于其晶体特征,与碎屑颗粒的粘结程度较高;上乌尔禾组和风城组储集层中沸石胶结物与碎屑颗粒粘结差异主要与岩石成分、异常压力、矿物类型、晶体结构及后期成岩流体改造程度有关。

Iron-Catalyzed Amide Bond Formation from Carboxylic Acids and Isocyanates

We describe an iron-catalyzed amide bond formation from readily available carboxylic acids and isocyanates.This method utilizes an abundant and biocompatible iron catalyst and easily accessible starting materials,generates CO_(2) as the only byproduct,and features broad substrate scopes with good functional group compatibility.Therefore,it provides a cost-effective and practical protocol to access a diverse variety of amides.

Catalytic asymmetric synthesis of sulfur-containing atropisomers by C-S bond formations

Chiral organosulfur compounds are not only widely distributed in bioactive natural products and pharmaceuticals,but also play a significant role in chiral ligands/catalysts.Throughout the history of synthetic organic chemistry,chemists have been absorbed in the construction of centrally chiral organosulfur compounds.Nevertheless,there are relatively few reports on installing sulfur functional groups into axially chiral compounds.Atropisomerism is one of the fundamental phenomena in nature,which ubiquitously exists in natural products.After more than a century of development,atropisomers have been designed and extensively applied to pharmaceuticals,functional materials and chiral ligands/catalysts.Due to the importance of chiral sulfurcontaining atropisomers,there is an increasing demand for enantioselective synthesis of them.Recently,a diversity of approaches by C-S bond formations have been established for the construction of enantioenriched sulfur-containing atropisomers,however,there is no comprehensive review to summarize this great progress.In this mini-review,we summarize recent progress in catalytic asymmetric synthesis of sulfur-containing atropisomers by C-S bond formations,which includes sulfur nucleophilic reactions,sulfur electrophilic reactions and sulfur radical reactions.Furthermore,the reaction mechanisms are also discussed.We hope that this mini-review will enable more researchers to further explore this field.

Trinuclear Nickel Catalyst for Water Oxidation:Intramolecular Proton-Coupled Electron Transfer Triggered Trimetallic Cooperative O-O Bond Formation

We report a molecular trinuclear nickel(TNC-Ni)catalyst for water oxidation that exhibited high catalytic performance and stability under neutral conditions(pH 7).Electrochemical studies disclosed that cooperation among the three nickel sites plays a vital role in both charge accumulation and O-O bond formation.This TNC-Ni catalyst could accomplish 4e−oxidation of water by involving all three nickel sites and the O-O bond formation was triggered by a charge distribution process from 5 to 5_(dp) via proton-coupled electron transfer.

Rapid formation of Csp^(3)–Csp^(3) bonds through copper-catalyzed decarboxylative Csp^(3)–H functionalization

Transition-metal-catalyzed decarboxylative and C–H functionalization strategy for the construction of Csp^(2)-Csp^(2),Csp^(2)-Csp,and Csp^(2)-Csp^(3) bonds has been extensively studied.However,research surveys of this synthetic strategy for the Csp^(3)-Csp^(3) bond forming reactions are surprisingly scarce.Herein,we present an efficient approach for the rapid formation of Csp^(3)–Csp^(3) bond through copper-catalyzed decarboxylative Csp^(3)–H functionalization.The present method should provide a useful access to C3-substituted indole scaffolds with possible biological activities.Mechanistic experiments and DFT calculations supported a dual-Cu(Ⅱ)-catalytic cycle involving rate-determining decarboxylation in an outer-sphere radical pathway and spin-crossover-promoted C–C bond formation.This strategy offers a promising synthesis method for the construction of Csp^(3)–Csp^(3) bond in the field of synthetic and pharmaceutical chemistry and extends the number of still limited copper-catalyzed decarboxylative Csp^(3)–Csp^(3) bond forming reaction.

Palladium-catalyzed Suzuki-Miyaura cross-coupling reaction of organoboronic acids with N-protected 4-iodophenyl alanine linked isoxazoles

Suzuki-Miyaura coupling reaction of N-protected 4-iodopheyl alanine isoxazoles with arylboronic acids,catalyzed by palladium,efficiently produce benzyl-N-（4-bipheyl）-2-（3-methyl-5（E）-2-aryl-1-ethenyl-4-isoxazolyl）-amino-2-oxoethyl）carba- mates in good yields.This process is first of its kind to construct carbon-carbon bond formation having biaryl motif on amino acid linked isoxazole moiety.

Ion source effect on the bond length of ^4HeH^＋

The bond length of ^4HeH^＋ resulting from collision-induced destruction is measured at 1.4420 MeV using the Coulomb Explosion Technique. The measured bond length of ^4HeH^＋ is 0.094±0.003nm. The bond length of ^4HeH^＋ obtained with our radio frequency （RF） ion source is larger than that obtained with a duoplasmatron ion source at Argonne National Laboratory （ANL）, but the bond lengths of H^＋2 and H^＋3obtained separately by ANL and by us with the two different ion sources are consistent with each other, which implies that there exists an ion source effect on the bond length of ^4HeH^＋. The main reason why the 4^4HeH^＋ bond lengths obtained by the two different ion sources are different is also discussed.

A Modified Method for the Synthesis of Tetradentate Ligand Involving Peptide Bond

In view of the importance of picolinic acid (Pa) in preventing cell growth and arresting cell cycle, attempts were made to design, synthesize and characterize two new Pa based tetradentate ligands (DPPTR and DPPTY) with a modified procedure. The procedure reported here avoids by-products and provides better yield and purity.

New Generation Semi-Automatic Thermosonic Wire Bonder

The physical and technological aspects of wire ball-wedge bonding in the assembly of integrated circuits are considered.The video camera and the pattern recognition system(PRS)of new bonder helps to provide accurate positioning of the bonding tool on the chip pads of integrated circuits.The formation of the loop wire cycle is ensured by the synchronous movement of the bonding head along the Z axis and the working table along the XY axes based on the servo drive.A feature of the bonder is that it can bond all the wire loops of the electronic device according to the pre-recorded program without needing to align the bonding points.