An efficient chemo-and regioselective three-component synthesis of pyridazinones and phthalazinones using activated KSF

The first three-component and regioselective synthesis of pyridazinones and phthalazinones from arenes,anhydrides and ArNHNH;in the presence of efficient recyclable heterogeneous catalyst,montmorillonite-KSF,in high yield and short reaction time is reported.

Synthesis and characterization of new soluble poly(aryl ether nitrile)s containing phthalazinone moiety

A series of novel poly（aryl ether nitrile）s containing phthalazinone moiety were synthesized by the nucleophilic displacement reaction of bisphenol-like monomers （I） with 2,6-difluorobenzonitrile. The inherent viscosities ranged from 0.46 to 1.07 dL g^-1. The glass transition temperatures were in the range of 277-295℃, and the temperatures for 10% weight loss in nitrogen atmosphere were found between 495 and 527 ℃. The structures of these resultant polymers were confirmed by FT-IR and 1^H NMR. Moreover, the properties of poly（aryl ether nitrile）s including solubility and crystallinity were also studied.

Synthesis and characterization of quaternized poly(phthalazinone ether sulfone ketone)for anion-exchange membrane

Chloromethylated poly（phthalazinone ether sulfone ketone） （CMPPESK） was prepared from poly（phthalazinone ether sulfone ketone） （PPESK） using chloromethyl octyl ethers （CMOE） with lower toxicity as chloromethylated regent. CMPPESK was soluble in N-methyl-2-pyrrolidone （NMP）, N,N-dimethylacetamide （DMAc） and chloroform. Quaternized poly（phthalazinone ether sulfone ketone） （QAPPESK） was prepared from CMPPESK by quaternization. QAPPESK had excellent solvent resistance, which was only partly soluble in sulfuric acid （98%） and swollen in N,N-dimethylformamide （DMF）. The vanadium redox flow battery （V-RFB） using QAPPESK anion-exchange membrane had better performance with 88.3% of overall energy efficiency.

Synthesis of Novel Poly(aryl ether amide)s Containing the Phthalazinone Moiety

Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one were successfully synthesized from readily available heterocyclic bisphenol-like monomers in two steps in high yield. A series of novel poly(aryl ether amide)s containing the phthalazinone moiety were successfully prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents.

Synthesis of Poly(phthalazinone ether ketone) Containing Sodium Sulfonate Groups via Direct Polymerization

1, 2-Diliydro-4-(4-hydroxyphenyl)(2H)phthalazin-1-one(DHPZ) was sulfonated in concentrated Sulfuric acid. Poly(phthalazinone ether ketone) containing pendant sodium sulfonate group was synthesized from sulfonated and pure 1,2-dihydro-4-(4-hydroxyphenyl)(2H)phthalazin-1-one, and 4,4'-difluorodiphenylketone. The sulfonated monomer and sulfonated polymer were characterized with FT-IR and H-1-NMR.

Synthesis and characterization of novel poly(aryl ether sulfone ketone)s containing phthalazinone and biphenyl moieties

A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures （Tg） and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction （WAXD）.

Synthesis and Characterization of Poly(ether imide)s Containing m-Methyl and Phthalazinone Moieties

Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3, 4-dicarboxyl-N-phenyl)-4-(3, 4-dicarboxyl-phenoxyl-4-(2-methyl)-phenyl)-2, 3- phthal-azin-1-one dianhydride and three amines, and characterized. The polymers show good solubility and thermal properties.

Synthesis of Methyl-substituted Phthalazinone-based Aromatic Poly(amide imide)s

A series of novel aromatic poly ( amide imide)s containing phthalazinone moieties were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with four diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36~0.65 dL/g. These polymers had high glass transition temperatures above 300C and they lost 10% weight between 426~475C in N2. The structure of diamine 1 and the polymers was confirmed by IR, 1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP, m-cresol etc. and easily cast into tough, flexible films. The X-ray indicated that they are all amorphous.

N-Arylation of azaheterocycles with aryl and heteroaryl halides catalyzed by iminodiacetic acid resin-chelated copper complex

Iminodiacetic acid resin-chelated copper(Ⅱ) complex is effective in cross-coupling reactions between azaheterocycles and aryl or heteroaryl halides,providing N-arylated products in good to excellent yields.The copper catalyst is air stable and can be readily recovered and reused with minimal loss of activity for three runs.

Characterization and tribological investigation of self-assembled trimethoxysilyl-functionalized poly(phthalazinone ether ketone)thin films on glass substrates

Trimethoxysilyl-functionalized PPEK（PKGS） films had been designed to serve as wear resistant coatings for silicon surfaces. These surface films were formed by a dip-coating technique applied to self-assembled monolayers（SAMs）.The formation and wetting behavior of PKGS films were characterized by means of contact angle measurement.The friction coefficient of the film prepared is very low（about 0.1）,and the anti-wear behavior is good,with a lack of failure after sliding over 1800 s.

Synthesis of New Soluble Polyarylates Containing Phthalazinone Moiety

A novel diacid chloride, 2-（4-chlorocarboxyphenyl）-4-[3,5-dimethyl-4-（4-chlorocarbo-xylphenoxy）phenyl]-2,3-phthalazin-l-one 2, was synthesized and used for the preparation of polyarylates with inherent viscosities of 0.25-0.37 dL·g^-1. The glass transition temperatures of polyarylates were in the range of 217-272℃. The temperatures at 10% weight loss of polyarylates were found to be in the range of 434-464℃ in nitrogen atmosphere and their structure was confirmed by FTIR and IH NMR. The amorphous polyarylates exhibited excellent solubility in a variety of solvents such as NMP, DMAc, DMF and chloroform.

Synthesis and characterization of poly(phthalazinone ether nitrile) (PPEN)-polydimethylsiloxane (PDMS) block copolymers

Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.

SYNTHESIS OF NEW AROMATIC POLY(AMIDE IMIDE)S FROM UNSYMMETRICAL EXTENDED DIAMINE CONTAINING A PHTHALAZINONE MOIETY

The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a series of new aromatic poly(amide imide)s (3a-e) containing the kink non-coplanar phthalazinone heterocyclic units in the polymer main chains with inherent viscosities of 0.58-0.66 dL/g. The polymers are readily soluble in a variety of solvents such as N,N- dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide, N-methyl-2-pyrrolidinone, pyridine and m-cresol and can be cast to form flexible and tough films. The glass transition temperatures of polymers (Tg) are in the range of 301-327°C, and the temperatures for 5% weight loss in nitrogen are in the range of 498-521 'C.

Synthesis and Characterization of Poly (ether imide)s Containing Phthalazinone and Isopropyl Moieties

A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.

CuI/Proline-catalyzed N-Arylation of Nitrogen Heterocycles

Ma＇s CuI/proline procedure for the catalytic cross coupling between nitrogen heterocycles and aryl halides was markedly improved. The key finding was that K3PO4 was a much better base than K2CO3 for the reaction. With this new reaction condition the cross coupling with aryl iodides could be accomplished in 1,4-dioxane instead of DMSO. This reactin also could be carried out in DMF. Furthermore, the coupling yields under the new conditions are usually higher than in Ma＇s original methods.

A bifunctional and recyclable catalyst:Amine and ionic liquid grafting on MOFs for the one-pot synthesis of N-aryl oxazolidin-2-ones

A bifunctional heterogeneous catalyst was designed and synthesized,denoted DMEDA/IL–NH2-MIL-101.The structure and physical-chemical characterization of DMEDA/IL–NH2-MIL-101 and its precursors were characterized by SEM,N2 adsorption-desorption,XPS,FT-IR,PXRD,elemental analysis,and TGA techniques.The date showed that the two catalytic components of N,N-dimethylethylenediamine(DMEDA)and 1-butyl-3-methylimidazolium bromide(BmimBr)were chemically immobilized in NH2-MIL-101 nanocages.The amine of DMEDA was grafted onto carrier NH2-MIL-101 by N–Cr coordinate covalent bonds and the ionic liquid of BmimBr(IL(Br-))was anchored in the NH2-MIL-101 nanocages by'ship-in-a-bottle'method,in which the amidogen of NH2-MIL-101 condensed with N,N-carbonyldiimidazole(CDI)firstly,and then alkylated with 1-bromo butane.This novel heterogeneous catalyst with two different active sites can efficiently catalyze the synthesis of N-aryl oxazolidin-2-ones from carbon dioxide(CO2),epoxides,and anilines in one-pot under mild solvent-free conditions.It not only showed good stability and recoverability after five cycles but also exhibited shape selectivity for the substrate due to the synergic catalysis of amine,ionic liquid,and NH2-MIL-101.This novel bifunctional material is a promising solid catalyst for the green synthesis of N-aryl oxazolidin-2-ones.

One-step synthesis of carbon-supported copper nanoparticles from biomass for N-arylation of pyrazole

Carbon-supported copper catalyst was prepared for the first time in one-step with copper nitrate and corn stalk through calcination under different temperatures. Uniformly dispersed nanoparticles were obtained and were identified to be Cu（0） and Cu（Ⅰ） in XRD patterns. Excellent catalytic activity and selectivity were achieved in the N-arylation of pyrazole under ligand and protection gas free conditions. About90.4% of product yield was achieved with only 0.5 mol% of copper catalyst（Cu-C-300）, which was considerably more efficient than previous reports. XPS results suggested that the N-arylation of pyrazole activity was closely related to the surface Cu（Ⅰ） species.

Synthesis and Properties of Polyetherketones Containing Sulfide and Phthalazinone

High molecular weight copoly(ether ketone)s (PEK) based on 4-(4-hydroxyphenyl)-1- phthalazinone (DHPZ)/4,4-thiobisphenol (TBP)/4,4-diflourodiphenylketone (DFK) were prepared by nucleophilic substitution polycondensation. The copolymers were characterized by FT-IR and 1H-NMR. Thermal properties and solubility of copolymers were studied.