Formation mechanism of nanopores in dense films of anodic alumina

Constant-current anodization of pure aluminum was carried out in non-corrosive capacitor working electrolytes to study the formation mechanism of nanopores in the anodic oxide films.Through comparative experiments,nanopores are found in the anodic films formed in the electrolytes after high-temperature storage(HTS)at 130°C for 240 h.A comparison of the voltage-time curves suggests that the formation of nanopores results from the decrease in formation efficiency of anodic oxide films rather than the corrosion of the electrolytes.FT-IR and UV spectra analysis shows that carboxylate and ethylene glycol in electrolytes can easily react by esterification at high temperatures.Combining the electronic current theory and oxygen bubble mold effect,the change in electrolyte composition could increase the electronic current in the anodizing process.The electronic current decreases the formation efficiency of anodic oxide films,and oxygen bubbles accompanying electronic current lead to the formation of nanopores in the dense films.The continuous electronic current and oxygen bubbles are the prerequisites for the formation of porous anodic oxides rather than the traditional field-assisted dissolution model.

Adsorption behavior of CO_(2)/H_(2)S mixtures in calcite slit nanopores for CO_(2) storage:An insight from molecular perspective

It is acknowledged that injecting CO_(2) into oil reservoirs and saline aquifers for storage is a practical and affordable method for CO_(2) sequestration.Most CO_(2) produced from industrial exhaust contains impurity gases such as H_(2)S that might impact CO_(2) sequestration due to competitive adsorption.This study makes a commendable effort to explore the adsorption behavior of CO_(2)/H_(2)S mixtures in calcite slit nanopores.Grand Canonical Monte Carlo(GCMC)simulation is employed to reveal the adsorption of CO_(2),H_(2)S as well as their binary mixtures in calcite nanopores.Results show that the increase in pressure and temperature can promote and inhibit the adsorption capacity of CO_(2) and H_(2)S in calcite nanopores,respectively.CO_(2)exhibits stronger adsorption on calcite surface than H_(2)S.Electrostatic energy plays the dominating role in the adsorption behavior.Electrostatic energy accounts for 97.11%of the CO_(2)-calcite interaction energy and 56.33%of the H_(2)S-calcite interaction energy at 10 MPa and 323.15 K.The presence of H_(2)S inhibits the CO_(2) adsorption in calcite nanopores due to competitive adsorption,and a higher mole fraction of H_(2)S leads to less CO_(2) adsorption.The quantity of CO_(2) adsorbed is lessened by approximately 33%when the mole fraction of H_(2)S reaches 0.25.CO_(2) molecules preferentially occupy the regions near the po re wall and H_(2)S molecules tend to reside at the center of nanopore even when the molar ratio of CO_(2) is low,indicating that CO_(2) has an adsorption priority on the calcite surface over H_(2)S.In addition,moisture can weaken the adsorption of both CO_(2) and H_(2)S,while CO_(2) is more affected.More interestingly,we find that pure CO_(2) is more suitable to be sequestrated in the shallower formations,i.e.,500-1500 m,whereas CO_(2)with H_(2)S impurity should be settled in the deeper reservoirs.

Molecular dynamics simulation of water transport through graphene-based nanopores: Flow behavior and structure characteristics

The flow behavior of pressure-driven water infiltration through graphene-based slit nanopores has been studied by molecular simulation.The simulated flow rate is close to the experimental values,which demonstrates the reasonability of simulation results.Water molecules can spontaneously infiltrate into the nanopores,but an external driving force is generally required to pass through the whole pores.The exit of nanopore has a large obstruction on the water effusion.The flow velocity within the graphene nanochannels does not display monotonous dependence upon the pore width,indicating that the flow is related to the microscopic structures of water confined in the nanopores.Extensive structures of confined water are characterized in order to understand the flow behavior.This simulation improves the understanding of graphene-based nanofluidics,which helps in developing a new type of membrane separation technique.

A biosensor based on graphene nanoribbon with nanopores:a first-principles devices-design

A biosensor device, built from graphene nanoribbons （GNRs） with nanopores, was designed and studied by first- principles quantum transport simulation. We have demonstrated the intrinsic transport properties of the device and the effect of different nucleobases on device properties when they are located in the nanopores of GNRs. It was found that the device＇s current changes remarkably with the species of nucleobases, which originates from their different chemical compositions and coupling strengths with GNRs. In addition, our first-principles results clearly reveal that the distinguished ability of a device＇s current depends on the position of the pore to some extent. These results may present a new way to read off the nucleobases sequence of a single-stranded DNA （ssDNA） molecule by such GNRs-based device with designed nanopores

Preliminary study on nanopores,nanofissures,and in situ accumulation of Gulong shale oil

The Qingshankou Formation shale oil in the Gulong Sag is an important oil and gas reservoir in the Daqing oilfield,with geological resources of 15.1 billion tons.The fabric of shale can reflect not only its genesis but also the nature of the reservoir space,its physical properties,oil content,and development value.Here,the characteristics of clay minerals in the Gulong shale oil reservoir were studied via electron microscopy,with the primary focus on the microfabrics and reservoir space;thereafter,the in situ accumulation was studied and discussed.Electron backscattering patterns revealed that nanometer pores and fissures were well developed in the Gulong shale oil reservoir.The nano pores were mostly 20-50 nm in diameter(median 20-30 nm),irregularly shaped,mostly,polygonal,and connected with nanofissures.The widths of nanofissures ranged mostly between 10-50 nm(median 20-30 nm);moreover,these fissures were mainly formed by F-F condensation of clay sheets(clay domains).The coagulation of clays was closely related to organic matter,especially algae.The clay colloids were negatively charged due to isocrystalline replacement;hence,metal cations were absorbed around the clay,forming a positive clay group.The positively charged clays subsequently adsorbed negatively charged humic acid(organic matter)and initially degraded algae to form an organic clay flocculant.When the organic clay flocculates reached the threshold for hydrocarbon generation and expulsion,the volume of organic matter decreased by 87%;thereafter,the generated and expelled hydrocarbon filled the nearby pores formed by this contraction.Moreover,the discharged hydrocarbon could not migrate due to capillary resistance(~12 MPa)of the nanopores;hence,the nanopores formed a unique continuous in situ reservoir within the Gulong shale oil.This study demonstrated that the Gulong shale oil reservoir is an actual clay-type shale reservoir with numerous nanopore and fissures.During coagulation,a large amount of organic matter(including layered algae)was absorbed by the clay,forming an organic clay condensate that could have provided the material foundation for hydrocarbon generation at a later stage.Thermal simulation experiments revealed that the volume of organic matter decreased sharply after hydrocarbon generation and expulsion.

Highly Efficient Power Conversion from Salinity Gradients with Ion-Selective Polymeric Nanopores

A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion efficiency and power density are often limited due to the challenge in reliably controlling the size of the nanopores with the conventional chemical etching method. Here we report that without chemical etching, polyimide （PI） membranes irradiated with GeV heavy ions have negatively charged nanopores, showing nearly perfect selectivity for cations over anions, and they can generate electrical power from salinity gradients. We further demonstrate that the power generation efficiency of the PI membrane approaches the theoretical limit, and the maximum power density reaches 130m W/m2 with a modified etching method, outperforming the previous energy conversion device that was made of polymeric nanopore membranes.

Molecular insights on Ca^(2+)/Na+separation via graphene-based nanopores:The role of electrostatic interactions to ionic dehydration

Ca^(2+)/Na+separation is a common problem in industrial applications,biological and medical fields.However,Ca^(2+)and Na+have similar ionic radii and hydration radii,thus Ca^(2+)/Na+separation is challenging.Inspired by biological channels,group modification is one of the effective methods to improve the separation performance.In this work,molecular dynamics simulations were performed to investigate the effects of different functional groups(COO,NH3+)on the separation performance of Ca^(2+)and Na+through graphene nanopores under an electric field.The pristine graphene nanopore was used for comparison.Results showed that three types of nanopores preferred Ca^(2+)to Na+,and Ca^(2+)/Na+selectivity followed the order of GE-COO(4.06)>GE(1.85)>GE-NH3+(1.63).Detailed analysis of ionic hydration microstructure shows that different nanopores result in different hydration factors for the second hydration layer of Ca^(2+)and the first layer of Na+.Such different hydration factors corresponding to the dehydration ability can effectively evaluate the separation performance.In addition,the breaking of hydrogen bonds between water molecules due to electrostatic effects can directly affect the dehydration ability.Therefore,the electrostatic effect generated by group modification will affect the ionic hydration microstructure,thus reflecting the differences in dehydration ability.This in turn affects the permeable and separation performance of cations.The results of this work provide perceptive guidelines for the application of graphene-based membranes in ion separation.

Molecular insight into the oil displacement mechanism of CO_(2) flooding in the nanopores of shale oil reservoir

With the increasing demand for petroleum,shale oil with considerable reserves has become an important part of global oil resources.The shale oil reservoir has a large number of nanopores and a complicated mineral composition,and the effect of nanopore confinement and pore type usually makes the effective development of shale oil challenging.For a shale oil reservoir,CO_(2) flooding can effectively reduce the oil viscosity and improve the reservoir properties,which can thus improve the recovery performance.In this study,the method of non-equilibrium molecular dynamics(NEMD)simulation is used to simulate the CO_(2) flooding process in the nanoscale pores of shale oil reservoir.The performance difference between the organic kerogen slit nanopore and four types of inorganic nanopores is discussed.Thus,the effects of nanopore type and displacement velocity on the nanoscale displacement behavior of CO_(2) are analyzed.Results indicate that the CO_(2) flooding process of different inorganic pores is different.In comparison,the displacement efficiency of light oil components is higher,and the transport distance is longer.The intermolecular interaction can significantly affect the CO_(2) displacement behavior in nanopores.The CO_(2) displacement efficiency is shown as montmorillonite,feldspar>quartz>calcite>kerogen.On the other hand,it is found that a lower displacement velocity can benefit the miscibility process between alkane and CO_(2),which is conducive to the overall displacement process of CO_(2).The displacement efficiency can significantly decrease with the increase in displacement velocity.But once the displacement velocity is very high,the strong driving force can promote the alkane to move forward,and the displacement efficiency will recover slightly.This study further reveals the microscopic oil displacement mechanism of CO_(2) in shale nanopores,which is of great significance for the effective development of shale oil reservoirs by using the method of CO_(2) injection.

A transient model integrating the nanoconfinement effect and pore structure characteristics of oil transport through nanopores

Understanding the integrated transport behavior of oil in shale nanopores is critical to efficient shale oil development. In this paper, based on the time-dependent Poiseuille flow momentum equation, we present a novel transient model to describe oil transport in unsteady and steady states. The model incorporates the effect of the critical shift density, apparent viscosity, slip length, and alkane property, as well as pore tortuosity and surface roughness. We evaluated our model through a comparison with other models, experiments, and molecular dynamics simulations. The results show that the development rates of the volume flows of C_(6)–C_(12) alkane confined in inorganic nanopores and C_(12) alkane confined in organic nanopores were faster than that of the corresponding bulk alkane. In addition, the critical drift density positively promoted the volume flow development rate in the unsteady state and negatively inhibited the mass flow rate in the steady state. This effect was clearest in pores with a smaller radius and lower-energy wall and in alkane with shorter chain lengths. Furthermore, both the nanoconfinement effect and pore structure determined whether the volume flow enhancement rate was greater than or less than 1. The rate increased or decreased with time and was controlled mainly by the nanoconfinement effect. Moreover, as the wall energy increased, the flow inhibition effect increased;as the carbon number of alkane increased, the flow promotion effect increased. The results indicate that the proposed model can accurately describe oil transport in shale nanopores.

Pressure-driven membrane inflation through nanopores on the cell wall

Walled cells,such as in plants and fungi,compose an important part of the model systems in biology.The cell wall primarily prevents the cell from over-expansion when exposed to water,and is a porous material distributed with nanosized pores on it.In this paper,we study the deformation of a membrane patch by an osmotic pressure through a nanopore on the cell wall.We find that there exists a critical pore size or a critical pressure beyond which the membrane cannot stand against the pressure and would inflate out through the pore and further expand.The critical pore size scales linearly with the membrane tension and quadratically with the spontaneous curvature.The critical pressure is inversely proportional to the pore radius.Our results also show that the fluid membrane expansion by pressure is mechanically different from the solid balloon expansion,and predict that the bending rigidity of the membrane in walled cells should be much larger than that of the mammalian cells so as to prevent membrane inflation through the pores on the cell wall.

3-83 Influence of Electrolyte Concentration on the Rectification of Single Conical Nanopores

A fundamental understanding of the rectification effect in the nanopores and the ion transport near charged surfaces on the nanometer length scale can push towards high performance energy storage devices[1]. Typically,nanopores are constructed within polymers, glass, or silica, and have internal and external surfaces that are electrically charged.

Effect of salt gradients on DNA translocation through solid-state nanopores

Aiming at the issues of controlling the translocation speed of DNA through a solid-state nanopore and enlarging the signal-to-noise ratio of ionic current modulation, which are challenges for the application of nanopore technology in DNA detection, salt concentration gradients are applied across the nanopore to investigate their influence on the DNA translocation time and signal-to-noise ratio. Experimental data demonstrates that, in symmetric concentration conditions, both the current blockade and dwell time for A-DNA translocation through a solid-state nanopore increase along with potassium chloride concentration. When the concentration in the trans chamber is decreased from 1 to 0.1 mol/L, keeping the concentration of the cis chamber at 1 mol/L, the normalized current blockade is found to be increased by one order. The increased dwell time and enhanced signal-to-noise ratio are achieved with salt gradients across the nanopore, which can improve the sensitivity when detecting DNA samples.

An analytical model for water-oil two-phase flow in inorganic nanopores in shale oil reservoirs

The existence of water phase occupies oil flow area and impacts the confined oil flow behavior at the solid substrate in inorganic nanopores of shale oil reservoirs,resulting in a completely different flow pattern when compared with the single oil phase flow.This study proposes an analytical model to describe the water-oil two-phase flow.In this model,water slippage at the solid substrate is considered while oil slip is introduced to calculate the oil movement at the solid-oil boundary in dry conditions.It is proven that the oil flow profiles of both the two-phase model and single-phase model show parabolic shapes,but the oil flow capacity drops when water takes up the flow space and the impact of water is more significant when the pore dimension is smaller than 30 nm.Also,the oil flow velocity at a pore center is found to drop linearly given a larger water saturation in wet conditions.The effects of surface wettability and oil properties on water-oil flow are also discussed.Compared with the existing singlephase models,this model describes oil flow pattern in the wet condition with the incorporation of the influence of nanopore properties,which better predicts the oil transport in actual reservoir conditions.Water-oil relative permeability curves are also obtained to improve oil yield.

Effects of nanopores and sulfur doping on hierarchically bunched carbon fibers to protect lithium metal anode

Studies on three-dimensional structured carbon templates have focused on how to guide homogeneous lithium metal nucleation and growth for lithium metal anodes(LMAs).However,there is still insufficient evidence for a key factor to achieve their high electrochemical performance.Here,the effects of nanopores and sulfur doping on carbon-based nanoporous host(CNH)electrode materials for LMAs were investigated using natural polymer-derived CNHs.Homogeneous pore-filling behaviors of lithium metal in the nanopores of the CNH electrode materials were first observed by ex situ scanning electron microscopy analysis,where the protective lithium metal nucleation and growth process led to significantly high Coulombic efficiency(CE)of~99.4%and stable 600 cycles.In addition,a comparison study of CNH and sulfurdoped CNH(S-CNH)electrodes,which differ only in the presence or absence of sulfur,revealed that sulfur doping can cause lower electrochemical series resistance,higher CE value,and better cycling stability in a wide range of current densities and number of cycles.Moreover,S-CNH-based LMAs showed high electrochemical performance in full-cell Li-S battery tests using a sulfur copolymer cathode,where a high energy density of 1370Wh kgelectrode−1 and an excellent power density of 4120Wkgelectrode−1 were obtained.

Effect of confinement on the three-phase equilibrium of water-oil-CO_(2)mixtures in nanopores

Accurate characterization of fluid phase behavior is an important aspect of CO_(2) enhanced shale oil recovery.So far,however,there has been little discussion about the nanopore confinement effect,including adsorption and capillarity on the phase equilibrium of water-oil-CO_(2) mixtures.In this study,an improved three-phase flash algorithm is proposed for calculating the phase behavior of water-oil-gas mixture on the basis of an extended Young-Laplace equation and a newly developed fugacity calculation model.The fugacity model can consider the effect of water-oil-gas adsorption on phase equilibrium.A water-Bakken oil-CO_(2) mixture is utilized to verify the accuracy of the flash algorithm and investigate the confinement effect.Results show that the confinement effect promotes the transfer of all components in the vapor phase to other phases,while the transfer of water,CO_(2),and lighter hydrocarbons is more significant.This leads to a large decrease,a large increase,and a small increase in the mole fraction of the vapor,oleic,and aqueous phases,respectively.When the confinement effect is considered,the density difference of vaporoleic phases decreases,and the interfacial tension of vapor-oleic phases decreases;however,the density difference of vapor-aqueous phases increases,the interfacial tension of vapor-aqueous phases still decreases.

Shale gas transport in nanopores with mobile water films and water bridge

Gas flow properties in nanopores are significantly determined by the flow patterns. Slug flow pattern is a potential water–gas two phase flow pattern, in which gas molecules flow in form of gas slugs and water molecules separate gas slugs. Considering water slippage, a portion of water molecules accumulates at the wall with lower mobility, while the remaining water molecules take the shape of a water bridge. Adopting foam apparent viscosity model to represent slug rheological behavior, how water bridge disturbs on gas flow capacity is estimated. The results are compared with the water–gas two phase flow model that assumes annular flow pattern as well as the single gas flow model without the consideration of water. The comparison illustrates that gas molecular movement is significantly hindered by flow space reduction and loss of gas slippage. The impact from water phase of slug flow pattern is more significant than that of annular flow pattern on gas flow capacity. It is discovered that larger nanopores improve gas flow capacity while maintaining bulk water layer thickness and increasing water bridge thickness tend to reduce gas transport ability. A better understanding of the structure and transport of water and gas molecules is conducive to figure out the specific gas–water flow behavior and predict shale gas production.

Morphologies of Core-Shell-Cylinder-Forming ABC Star Triblock Copolymers in Nanopores

The self-assembly behavior of ABC star triblock copolymers can lead to a large number of nanostructures. Indeed, many new and interesting structures have already been discovered and proven to be hotspot in soft matter physics research. In this work, we introduce different phase diagrams of core-shell-cylinder-forming ABC star triblock copolymers under different conditions, including in-bulk and pore geometries with different sizes. The relation between the pore size geometries and their corresponding structures are also revealed. The different properties of the surface potential field that significantly affect the self-assembly process of ABC star triblock copolymers are investigated as well.

Ion and water transport in charge-modified graphene nanopores

Porous graphene has a high mechanical strength and an atomic-layer thickness that makes it a promising material for material separation and biomolecule sensing. Electrostatic interactions between charges in aqueous solutions are a type of strong long-range interaction that may greatly influence fluid transport through nanopores. In this study, molecular dynamic simulations were conducted to investigate ion and water transport through 1.05-nm diameter monolayer graphene nanopores, with their edges charge-modified. Our results indicated that these nanopores are selective to counterions when they are charged. As the charge amount increases, the total ionic currents show an increase-decrease profile while the coion currents monotonically decrease. The co-ion rejection can reach 76.5% and 90.2% when the nanopores are negatively and positively charged, respectively. The Cl-ion current increases and reaches a plateau, and the Na＋current decreases as the charge amount increases in systems in which Na＋ions act as counterions. In addition, charge modification can enhance water transport through nanopores. This is mainly due to the ion selectivity of the nanopores. Notably, positive charges on the pore edges facilitate water transport much more strongly than negative charges.

Probing conformational change of T7 RNA polymerase and DNA complex by solid-state nanopores

Proteins are crucial to most biological processes, such as enzymes, and in various catalytic processes a dynamic motion is required. The dynamics of protein are embodied as a conformational change, which is closely related to the flexibility of protein. Recently, nanopore sensors have become accepted as a low cost and high throughput method to study the features of proteins. In this article, we used a SiN nanopore device to study the flexibility of T7 RNA polymerase（RNAP） and its complex with DNA promoter. By calculating full-width at half-maximum（FWHM） of Gaussian fits to the blockade histograms, we found that T7 RNAP becomes more flexible after binding DNA promoter. Moreover, the distribution of fractional current blockade suggests that flexibility alters due to a breath-like change of the volume.

Investigation on characteristics of liquid self-diffusion in slit nanopores using simple quasicrystal model of liquid

Dynamical properties of liquid in nano-channels attract much interest because of their applications in engineering and biological systems. The transfer behavior of liquid confined within nanopores differs significantly from that in the bulk. Based on the simple quasicrystal model of liquid, analytical expressions of self-diffusion coefficient both in bulk and in slit nanopore are derived from the Stokes–Einstein equation and the modified Eyring's equation for viscosity. The local self-diffusion coefficient in different layers of liquid and the global self-diffusion coefficient in the slit nanopore are deduced from these expressions. The influences of confinement by pore walls,pore widths, liquid density, and temperature on the self-diffusion coefficient are investigated. The results indicate that the self-diffusion coefficient in nanopore increases with the pore width and approaches the bulk value as the pore width is sufficiently large. Similar to that in bulk state, the self-diffusion coefficient in nanopore decreases with the increase of density and the decrease of temperature, but these dependences are weaker than that in bulk state and become even weaker as the pore width decreases. This work provides a simple method to capture the physical behavior and to investigate the dynamic properties of liquid in nanopores.