期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
水热法合成NCQD/BiOCl复合物及其光催化分解水性能 被引量:3
1
作者 邬纯晶 杨超 +2 位作者 曹剑瑜 陈智栋 许娟 《常州大学学报(自然科学版)》 CAS 2018年第3期41-49,共9页
以葡萄糖和甘氨酸为原料,首先经水热途径制备了含氮碳量子点(NCQD)。接着以硝酸铋为反应物,聚乙烯吡咯烷酮K30(PVP-K30)为模板剂,NCQD为载体,通过水热法合成得到NCQD/BiOCl复合物。运用透射电镜(TEM)、场发射扫描电镜(FESEM)、X射线衍射... 以葡萄糖和甘氨酸为原料,首先经水热途径制备了含氮碳量子点(NCQD)。接着以硝酸铋为反应物,聚乙烯吡咯烷酮K30(PVP-K30)为模板剂,NCQD为载体,通过水热法合成得到NCQD/BiOCl复合物。运用透射电镜(TEM)、场发射扫描电镜(FESEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见吸收光谱(Uv-Vis)和荧光发射光谱对NCQD/BiOCl复合物进行了形貌、结构和物性表征。TEM分析揭示2~3nm的NCQD均匀分散在BiOCl纳米片表面。在模拟太阳光的条件下,研究了NCQD/BiOCl复合物的光电流和光催化制氢性能。结果显示,NCQD/BiOCl复合物的带隙为2.8eV,光响应电流约为纯BiOCl的3.6倍。NCQD的质量分数为5%的NCQD/BiOCl复合物显示了最佳的产氢性能,室温下光照5h后的产氢速率为19.34μmol·h^(-1),显著高于相同条件下纯BiOCl的产氢速率(1.06μmol·h^(-1))。此外,该复合物具有优异的循环产氢性能,5次光催化后产氢比容量还能保留起始值的98%。 展开更多
关键词 ncqd BiOCl纳米片 光催化 产氢速率
下载PDF
掺N碳量子点负载于TiO_2的复合催化剂光解甲芬那酸研究 被引量:10
2
作者 张钱新 王枫亮 +6 位作者 谢治杰 苏跃涵 陈平 吕文英 姚琨 刘海津 刘国光 《中国环境科学》 EI CAS CSSCI CSCD 北大核心 2017年第8期2930-2940,共11页
以水热法成功制备了水溶性较好的N掺杂的碳量子点(NCQDs),并负载于P25制得P25/NCQDs复合材料;通过透射电子显微镜(TEM)、X射线衍射(XRD)和紫外可见光吸收光谱(UV-vis)等对P25/NCQDs复合材料进行形貌、元素和催化活性的表征.结果表明,NC... 以水热法成功制备了水溶性较好的N掺杂的碳量子点(NCQDs),并负载于P25制得P25/NCQDs复合材料;通过透射电子显微镜(TEM)、X射线衍射(XRD)和紫外可见光吸收光谱(UV-vis)等对P25/NCQDs复合材料进行形貌、元素和催化活性的表征.结果表明,NCQDs成功附着在P25上面,证实NCQDs的作用既使P25吸收光发生红移,又有效的扩大了P25的吸收光谱范围;催化剂活性实验研究表明P25/NCQDs对甲芬那酸(MEF)的光催化降解速率是同等条件下使用P25的6.4倍;碱性环境下有利于MEF的降解.实验同时研究了P25/NCQDs复合材料对MEF光催化降解的影响机制,通过对电子顺磁共振波谱(EPR)的分析,结果表明羟基是P25/NCQDs所产生的主要活性物质;使用异丙醇作为·OH的捕获剂,得出·OH对MEF降解的贡献率为82.9%. 展开更多
关键词 甲芬那酸(MEF) 掺N碳量子点负载TiO2(NCP) 降解机制 羟基自由基
下载PDF
Visible-light-activated N-doped CQDs/g-C3N4/Bi2WO6 nanocomposites with different component arrangements for the promoted degradation of hazardous vapors 被引量:2
3
作者 Mi Gyeong Kim Wan-Kuen Jo 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2020年第5期168-175,共8页
To investigate whether the arrangement of componentsin multi-composite photocatalysts may affect their photocatalytic properties,due to different charge-transfer routes,two ternary-nanocomposite photocatalysts with di... To investigate whether the arrangement of componentsin multi-composite photocatalysts may affect their photocatalytic properties,due to different charge-transfer routes,two ternary-nanocomposite photocatalysts with different component arrangements,comprising N-doped carbon quantum dots(NCQDs),g-C3N4(CN),and Bi2WO6(BWO)(hereafter referred to as NCQDs/CN/BWO),were developed,and the photocatalytic degradation of model hazardous vapors under visible-light illumination was investigated.Type I NCQDs/CN/BWO,which was developed by the combination of NCQDs/BWO and CN,exhibited photocatalytic ability superior to that of type II NCQDs/CN/BWO,which was developed by the combination of CN/BWO and NCQDs;the superior photocatalytic ability corresponded to the dual properties of NCQDs:charge mediation and upconversion photoluminescence.Moreover,the photocatalytic ability of NCQDs/CN/BWO was greater than those of the reference catalysts;in addition,this photocatalyst exhibited outstanding photochemical stability.Additionally,the effects of CN/(BWO+CN)weight ratio of the CN/BWO dual nanocomposites and the NCQDs/(BWO+CN+NCQDs)weight percentage of NCQDs/CN/BWO ternary nanocomposites on the pollutant removal efficiency were investigated.The plausible mechanisms over the two NCQDs/CN/BWO photocatalysts for the degradation of hazardous vapors were discussed.The component arrangement approach proposed herein afforded a technique toward the perceptive development of novel multi-component heterostructures for the photocatalytic degradation of hazardous vapors. 展开更多
关键词 COMPONENT arrangement CHARGE-TRANSFER route ncqds dual role Charge MEDIATOR Upconversion photoluminescence
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部