Mooring Tension and Motion Characteristics of A Submerged Fish Reef with Net in Waves and Currents Using Numerical Analysis

A numerical model was used to analyze the motion response and mooring tension of a submerged fish reef system. The system included a net attached to a rigid structure suspended up from the bottom with a single, high tension mooring by fixed flotation. The analysis was performed by using a Morison equation type finite element model configured with truss elements. Input forcing parameters into the model consisted of both regular and irregular waves, with and without a steady current. Heave, surge and pitch dynamic calculations of the reef structure were made. Tension response results of the attached mooring line were also computed. Results were analyzed in both the time and frequency domain in which appropriate, linear transfer functions were calculated. The influence of the current was more evident in the tension and heave motion response data. This is most likely the result of the large buoyancy characteristics of the reef structure and the length of the mooting cable. Maximum mooting component tension was found to be 13.9 kN and occurred when the reef was subjected to irregular waves with a co-linear current of 1.0 m/s velocity. The results also showed that the system had little damping （in heave） with damped natural periods of 2.8 s. This combination of system characteristics promotes a possible resonating situation in typical open sea conditions with similar wave periods.

Form-fnding methods for deployable mesh reflector antennas

Deployable high-frequency mesh reflector antennas for future communications and obser- vations are required to obtain high gain and high directivity. In order to support these new missions, reflectors with high surface accuracy are widely required. The form-finding analysis of deployable mesh reflector antennas becomes more vital which aims to determine the initial surface profile formed by the equilibrium prestress distribution in cables to satisfy the surface accuracy requirement. In this paper, two form-finding methods for mesh reflector antennas, both of which include two steps, are pro- posed. The first step is to investigate the prestress design only for the cable net structure as the circum- ferential nodes connected to the supporting truss are assumed fixed. The second step is to optimize the prestress distribution of the boundary cables connected directly to the supporting truss considering the elastic deformation of the antenna structure. Some numerical examples are carried out and the simulation results demonstrate the proposed form-finding methods can warrant the deformed antenna reflector surface matches the one by design and the cable tension forces fall in a specified range.

Green Construction of National Speed Skating Oval

1 Background As the basic principle of the world economy,environment,and social development,sustainable development is the focus of the international community today.In the Olympic Agenda 2020 published by the International Olympic Committee(IOC),sustainable development was officially listed as one of the core concepts of the Olympic Games.Since the beginning of the bid,the concept of ctathlete-centered,sustainable and economical”was proposed,which was highly consistent with the idea of the Olympic Agenda 2020.To implement the concept of holding“green”Olympic Games and meet the sustainability requirements of the IOC,the Organizing Committee of Beijing Winter Olympic Games issued a series of documents related to the sustainability of sports venues such as Sustainability Policies for 2022 Beijing Winter Olympic Games and Winter Paralympic Games,and strived to realize the sustainable development of sports venues in the whole life cycle of planning and design stage,construction stage,operation stage,and post-game utilization.