Numerical simulation on magnetohydrodynamic power generation channel of scramjet

The reverse magnetohydrodynamic(MHD)energy bypass technology is a promising energy redis⁃tribution technology in the scramjet system,in augmented with a power generation equipment to supply the neces⁃sary long-distance flight airframe power.In this paper,a computational model of the scramjet magnetohydrody⁃namic channel is developed and verified by using the commercial software Fluent.It is found that when the mag⁃netic induction intensity is 1,2,3,4 T,the power generation efficiency is 22.5%,22.3%,22.0%,21.5%,and decreases with the increase of the magnetic induction intensity,and the enthalpy extraction rate is 0.026%,0.1%,0.21%,0.34%,and increases with the increase of the magnetic induction intensity.The deceleration ef⁃fect of electromagnetic action on the airflow in the power channel increases with the increase of magnetic induc⁃tion intensity.The stronger the magnetic field intensity,the more obvious the decreasing effect of fluid Mach num⁃ber in the channel.The power generation efficiency decreases as the magnetic induction intensity increases and the enthalpy extraction rate is reversed.As the local currents gathering at inlet and outlet of the power generation area,total temperature and enthalpy along the flow direction do not vary linearly,and there are maximum and minimum values at inlet and outlet.Increasing the number of electrodes can effectively regulate the percentage of Joule heat dissipation,which can improve the power generation efficiency.

Study on End Milling Generation Surface Model and Simulation in View of Main Axle's Tolerance

In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of "vaulted profile", heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were determined by diameter of milling cutter, feeding speed, ratio between the diameter of milling cutter and teeth point curve radius and width of workpiece. The study results can be applied to quality prediction of milled surfaces for precision and/or super precision milling operation.

Simulation and uniform design-based automatic generation of risk scenarios

This paper presents a methodology for automatically generating risk scenarios for dynamic reliability applications in which some dynamic characteristics(e.g.,the order,timing and magnitude of events,the value of relevant process parameters and initial conditions) have a significant influence on the evolution of the system.The main idea of the methodology is:(i) making the system model "express itself" through simulation by having the model driven by an elaborated simulation engine;(ii) exploiting uniform design to pick out a small subset of representative design points from the space of relevant dynamic characteristics;(iii) for each selected design point,employing a depth-first systematic exploration strategy to cover all possible scenario branches at each branch point.A highly dynamic example adapted from the literature(a chemical batch reactor) is studied to test the effectiveness of the proposed methodology.

Simulation-based automatic generation of risk scenarios

A methodology for automatically generating risk scenarios is presented.Its main idea is to let the system model ＂express itself＂ through simulation.This is achieved by having the simulation model driven by an elaborated simulation engine,which：（i） manipulates the generation of branch points,i.e.event occurrence times;（ii） employs a depth-first systematic exploration strategy to cover all possible branch paths at each branch point.In addition,a backtracking technique,as an extension,is implemented to recover some missed risk scenarios.A widely discussed dynamic reliability example（a holdup tank） is used to aid in the explanation of and to demonstrate the effectiveness of the proposed methodology.

Meteorological Data Generation for the Numerical Simulation of Stratified Flow in the Joumine Reservoir, Tunisia

Dynamic numerical simulation of water conditions is useful for reservoir management. In remote semi-arid areas, however, meteorological and hydrological time-series data needed for computation are not frequently measured and must be obtained using other information. This paper presents a case study of data generation for the computation of thermal conditions in the Joumine Reservoir, Tunisia. Data from the Wind Finder web site and daily sunshine duration at the nearest weather stations were utilized to generate cloud cover and solar radiation data based on meteorological correlations obtained in Japan, which is located at the same latitude as Tunisia. A time series of inflow water temperature was estimated from air temperature using a numerical filter expressed as a linear second-order differential equation. A numerical simulation using a vertical 2-D （two-dimensional） turbulent flow model for a stratified water body with generated data successfully reproduced seasonal thermal conditions in the reservoir, which were monitored using a thermistor chain.

Kinetic simulation of hydrocarbon generation and its application to in-situ conversion of shale oil

The kinetic parameters of hydrocarbon generation are determined through experimental simulation and mathematical calculation using four typical samples selected from the Cretaceous Nenjiang Formation in the northwest of Songliao Basin,Chang 7 Member of Triassic Yanchang Formation in the southwest of Ordos Basin,Paleogene in the southwest of Qaidam Basin,and Lucaogou Formation of Jimusar Sag in the east of Junggar Basin.The results show that activation energy of hydrocarbon generation of organic matter is closely related to maturity and mainly ranges between 197 kJ/mol and 227 kJ/mol.On this basis,the temperature required for organic matter in shale to convert into oil was calculated.The ideal heating temperature is between 270℃and 300℃,and the conversation rate can reach 90%after 50-300 days of heating at constant temperature.When the temperature rises at a constant rate,the temperature corresponding to the major hydrocarbon generation period ranges from 225 to 350℃at the temperature rise rate of 1-150℃/month.In order to obtain higher economic benefits,it is suggested to adopt higher temperature rise rate(60-150℃/month).The more reliable kinetic parameters obtained can provide a basis for designing more reasonable scheme of in-situ heating conversion.

Simulation Analysis for Massive Deployment of Variable Renewables Employing an Optimal Power Generation Mix Model

This paper develops a high time-resolution optimal power generation mix model in its time resolution of 10 minutes on 365 days by linear programming technique. The model allows us to analyse the massive deployment of photovoltaic system and wind power generation in power system explicitly considering those short-term output variation. PV （photovoltaic） and wind output are estimated, employing meteorological database. Simulation results reveal that variable fluctuation derived from a high penetration level of those renewables is controlled by quick load following operation of natural gas combined cycle power plant, pumped-storage hydro power, stationary NAS （sodium and sulfur） battery and the output suppression control of PV and wind. It additionally turns out that the operational configuration of those technologies for the renewable variability differs significantly depending on those renewable output variations in each season and solving the seasonal electricity imbalance as well as the daily imbalance is important if variable renewables are massively deployed.

Differences and identification on multi-time hydrocarbon generation of carboniferous-permian coaly source rocks in the Huanghua Depression,Bohai Bay Basin

Coal is a solid combustible mineral,and coal-bearing strata have important hydrocarbon generation potential and contribute to more than 12%of the global hydrocarbon resources.However,the deposition and hydrocarbon evolution process of ancient coal-bearing strata is characterized by multiple geological times,leading to obvious distinctions in their hydrocarbon generation potential,geological processes,and production,which affect the evaluation and exploration of hydrocarbon resources derived from coaly source rocks worldwide.This study aimed to identify the differences on oil-generated parent macerals and the production of oil generated from different coaly source rocks and through different oil generation processes.Integrating with the analysis of previous tectonic burial history and hydrocarbon generation history,high-temperature and high-pressure thermal simulation experiments,organic geochemistry,and organic petrology were performed on the Carboniferous-Permian(C-P)coaly source rocks in the Huanghua Depression,Bohai Bay Basin.The oil-generated parent macerals of coal's secondary oil generation process(SOGP)were mainly hydrogen-rich collotelinite,collodetrinite,sporinite,and cutinite,while the oil-generated parent macerals of tertiary oil generation process(TOGP)were the remaining small amount of hydrogen-rich collotelinite,sporinite,and cutinite,as well as dispersed soluble organic matter and unexhausted residual hydrocarbons.Compared with coal,the oil-generated parent macerals of coaly shale SOGP were mostly sporinite and cutinite.And part of hydrogen-poor vitrinite,lacking hydrocarbon-rich macerals,and macerals of the TOGP,in addition to some remaining cutinite and a small amount of crude oil and bitumen from SOGP contributed to the oil yield.The results indicated that the changes in oil yield had a good junction between SOGP and TOGP,both coal and coaly shale had higher SOGP aborted oil yield than TOGP starting yield,and coaly shale TOGP peak oil yield was lower than SOGP peak oil yield.There were significant differences in saturated hydrocarbon and aromatic parameters in coal and coaly shale.Coal SOGP was characterized by a lower Ts/Tm and C31-homohopane22S/(22S+22R)and a higher Pr/n C17compared to coal TOGP,while the aromatic parameter methyl dibenzothiophene ratio(MDR)exhibited coaly shale TOGP was higher than coaly shale SOGP than coaly TOGP than coaly SOGP,and coal trimethylnaphthalene ratio(TNR)was lower than coaly shale TNR.Thus,we established oil generation processes and discriminative plates.In this way,we distinguished the differences between oil generation parent maceral,oil generation time,and oil production of coaly source rocks,and therefore,we provided important support for the evaluation,prediction,and exploration of oil resources from global ancient coaly source rocks.

Application of DSAPSO Algorithm in Distribution Network Reconfiguration with Distributed Generation

With the current integration of distributed energy resources into the grid,the structure of distribution networks is becoming more complex.This complexity significantly expands the solution space in the optimization process for network reconstruction using intelligent algorithms.Consequently,traditional intelligent algorithms frequently encounter insufficient search accuracy and become trapped in local optima.To tackle this issue,a more advanced particle swarm optimization algorithm is proposed.To address the varying emphases at different stages of the optimization process,a dynamic strategy is implemented to regulate the social and self-learning factors.The Metropolis criterion is introduced into the simulated annealing algorithm to occasionally accept suboptimal solutions,thereby mitigating premature convergence in the population optimization process.The inertia weight is adjusted using the logistic mapping technique to maintain a balance between the algorithm’s global and local search abilities.The incorporation of the Pareto principle involves the consideration of network losses and voltage deviations as objective functions.A fuzzy membership function is employed for selecting the results.Simulation analysis is carried out on the restructuring of the distribution network,using the IEEE-33 node system and the IEEE-69 node system as examples,in conjunction with the integration of distributed energy resources.The findings demonstrate that,in comparison to other intelligent optimization algorithms,the proposed enhanced algorithm demonstrates a shorter convergence time and effectively reduces active power losses within the network.Furthermore,it enhances the amplitude of node voltages,thereby improving the stability of distribution network operations and power supply quality.Additionally,the algorithm exhibits a high level of generality and applicability.

Hydrocarbon generation from Carboniferous-Permian coaly source rocks in the Huanghua depression under different geological processes

Natural gas and condensate derived from Carboniferous-Permian(C-P)coaly source rocks discovered in the Dagang Oilfield in the Bohai Bay Basin(east China)have important implications for the potential exploration of C-P coaly source rocks.This study analyzed the secondary,tertiary,and dynamic characteristics of hydrocarbon generation in order to predict the hydrocarbon potentials of different exploration areas in the Dagang Oilfield.The results indicated that C-P oil and gas were generated from coaly source rocks by secondary or tertiary hydrocarbon generation and characterized by notably different hydrocarbon products and generation dynamics.Secondary hydrocarbon generation was completed when the maturity reached vitrinite reflectance(Ro)of 0.7%-0.9%before uplift prior to the Eocene.Tertiary hydrocarbon generation from the source rocks was limited in deep buried sags in the Oligocene,where the products consisted of light oil and gas.The activation energies for secondary and tertiary hydrocarbon generation were 260-280 kJ/mol and 300-330 kJ/mol,respectively,indicating that each instance of hydrocarbon generation required higher temperature or deeper burial than the previous instance.Locations with secondary or tertiary hydrocarbon generation from C-P coaly source rocks were interpreted as potential oil and gas exploration regions.

Simulation of large-scale numerical substructure in real-time dynamic hybrid testing

A solution scheme is proposed in this paper for an existing RTDHT system to simulate large-scale finite element （FE） numerical substructures. The analysis of the FE numerical substructure is split into response analysis and signal generation tasks, and executed in two different target computers in real-time. One target computer implements the response analysis task, wherein a large time-step is used to solve the FE substructure, and another target computer implements the signal generation task, wherein an interpolation program is used to generate control signals in a small time-step to meet the input demand of the controller. By using this strategy, the scale of the FE numerical substructure simulation may be increased significantly. The proposed scheme is initially verified by two FE numerical substructure models with 98 and 1240 degrees of freedom （DOFs）. Thereafter, RTDHTs of a single frame-foundation structure are implemented where the foundation, considered as the numerical substructure, is simulated by the FE model with 1240 DOFs. Good agreements between the results of the RTDHT and those from the FE analysis in ABAQUS are obtained.

Hydrocarbon Generation Evolution of Permo-Carboniferous Rocks of the Bohai Bay Basin in China

The Bohai Bay Basin is a Mesozoic subsidence and Cenozoic rift basin in the North China Craton. Since the deposition of the Permo-Carboniferous hydrocarbon source rock, the basin has undergone many tectonic events. The source rocks have undergone non-uniform uplift, twisting, deep burying, and magmatism and that led to an interrupted or stepwise during the evolution of hydrocarbon source rocks. We have investigated the Permo-Carboniferous hydrocarbon source rocks history of burying, heating, and hydrocarbon generation, not only on the basis of tectonic disturbance and deeply buried but also with new studies on apatite fission track analysis, fluid inclusion measurements, and the application of the numerical simulation of EASY % Ro. The heating temperature of the source rocks continued to rise from the Indosinian to Himalayan stage and reached a maximum at the Late Himalayan. This led to the stepwise increases during organic maturation and multiple stages of hydrocarbon generation. The study delineated the tectonic stages, the intensity of hydrocarbon generation and spatial and temporal distribution of hydrocarbon generations. The hydrocarbon generation occurred during the Indosinian, Yanshanian, and particularly Late Himalayan. The hydrocarbon generation during the late Himalayan stage is the most important one for the Permo-Carboniferous source rocks of the Bohai Bay Basin in China.

Hydrocarbon Generation Kinetic Characteristics from Different Types of Organic Matter

In order to contrast the hydrocarbon generation kinetic characteristics from different types of organic matter（OM）,18 samples from different basins were pyrolyzed using Rock-Eval-Ⅱapparatus under the open system.From the experimental results,the curve of hydrocarbon generation rate vs.temperature can be easily obtained,which usually can be used to optimize kinetic parameters （A,E,F）of the hydrocarbon generation model.In this paper,the parallel first-order reaction with a single frequency factor model is selected to describe the hydrocarbon generation kinetic characteristics. The hydrocarbon generation kinetic parameters reveal that the types of compound structures and chemical bonds of the lacustrine fades typeⅠOM are relatively homogeneous,with one dominating activation energy.The types of chemical bonds of the lacustrine facies typeⅡ2 OM and the terrestrial facies typeⅢOM are relative complex,with a broad activation energy distribution,and the reaction fraction of the preponderant activation energy drops with the decrease of hydrogen index.The impact of the activation energy distribution spaces on the geological extrapolation of kinetic parameters is also investigated.The results show that it has little effect on the hydrocarbon transformation ratio（TR）and therefore,the parallel first-order reaction model with proper number of activation energies can be better used to describe the hydrocarbon generation process.The geological extrapolation results of 18 samples of kinetic parameters show that the distribution range of the hydrocarbon generation rate of the typeⅠOM is relatively narrow and the hydrocarbon generation curve is smooth.In comparison,the distribution range of the hydrocarbon generation for typeⅢand typeⅡ2-ⅢOM are quite wide,and the hydrocarbon generation curves have fluctuation phenomena.The distribution range of the hydrocarbon generation rate and the fluctuation phenomena are related to the kinetic parameters of OM;the narrower the activation energy distribution,the narrower the hydrocarbon generation rate distribution,and the smoother the hydrocarbon generation curve,and vice versa.

Finite element simulation of inertia friction welding of superalloy bars

A thermo-mechanical coupling.finite element model was built to investigate the inertia friction welding of GH4169 bars. The remeshing and map solution techniques were adopted. Ttle whole welding process was investigated by adopting an innovative heat generation model and the flywheel rotational speed measured via the experiment. The simulated evolution of axial shortening shows a good agreement with the experiment. In addition, extensive .strain concentration presents in the interface and flash, and the largest ,strain exists near the flash root. Moreover, an intere.sting thermal reflux phenomenon during the cooling stage was found.

Three-dimensional transient numerical simulation for intake process in the engine intake port-valve-cylinder system

This paper presents a KIVA-3 code based numerical model for three-dimensional transient intake flow in the intake port-valve-cylinder system of internal combustion engine using body-fitted technique, which can be used in numerical study on internal combustion engine with vertical and inclined valves, and has higher calculation precision. A numerical simulation (on the intake process of a two-valve engine with a semi-sphere combustion chamber and a radial intake port) is provided for analysis of the velocity field and pressure field of different plane at different crank angles. The results revealed the formation of the tumble motion, the evolution of flow field parameters and the variation of tumble ratios as important information for the design of engine in-take system.

Variation of Coenzyme F_(420) Activity and Methane Yield in Landfill Simulation of Organic Waste

A simulated landfill anaerobic bioreactor was used to characterize the anaerobic biodegradation and biogas generation of organic waste which was mainly composed of residuals of vegetables and foods. We investigated the dynamics of the coenzyme F420 activity and determined correlations between biogas yields, methane yields, methane concentration and coenzyme F420 activity. The experiment was carded out under different conditions from control without any treatment, addition of Fe^3＋, microorganism inoculation to a combination of Fe3＋ addition and inoculation at a temperature of 36±2℃. The experiment was lasted 120 d and coenzyme F420 activity was analyzed using ultraviolet spectrophotornetry. Experimental results indicated that activity of the coenzyme F420 treated by Fe and microorganism inoculation increased substantially. The waste treated by inoculation had the greatest increase. When the waste was treated by Fe^3＋, inoculation and the combination of Fe^3＋ and inoculation, biogas yields increased by 46.9%, 132.6% and 153.1%, respectively; while the methane yields increased 4, 97 and 98 times. Methane concentration varied between 0 and 6% in the control reactor, from 0 to 14% for waste treated by the addition of Fe^3＋, from 0 to 59% for waste treated by inoculation and from 0 to 63% for waste treated by Fe^3＋ addition and inoculation. Correlations between coenzyme F420 activity and biogas production, methane production and methane concentration proved to be positively significant （p〈0.05）, except for the control. Consequently, coenzyme F420 activity could be used as an index for monitoring the activity of methanogens during anaerobic biodegradation of the organic fraction of municipal solid waste.

Research on hydraulic wind turbine semi-physical simulation platform

According to a research on the 30kVA simulation experimental platform of hydraulic wind tur- bine, its basic structure, composition and operation principle are expounded in this paper. An in- verter motor is used to simulate the wind turbine, while a similarity calculation method is applied be- tween the small and large wind turbine. A fixed displacement pump-variable motor closed loop is used as the main transmission system, and a self-excited synchronous generator generates electricity through the grid connection. The experiment and simulation study on the speed and power control of the hydraulic wind turbine is conducted, based on the experimental platform, thus correctness and progressiveness of the experiment platform is further verified. The experimental platform study lays a foundation for further research on the characteristics of hydraulic wind turhln~

On the generation of deep focus earthquakes in subduction zones

Following a quasi-dynamic scheme proposed by Minear and Toksoz (1970), thermal structures of subduction zonesfor different models by finite element method (FEM) were calculated. Density distribution and p-wave anomaly ofsubduction zones were calculated at the same time. Comparing with seismological evidences and results of laboratories. it is proposed that earthquakes occurred below 400 km depth are probably controlled by anti-crackmechanism.

High Resolution Ship Hydrodynamics Simulations in Open Source Environment

The numerical simulation of wake and flee-surface flow around ships is a complex topic that involves multiple tasks： the generation of an optimal computational grid and the development of numerical algorithms capable to predict the flow field around a hull. In this paper, a numerical framework is developed aimed at high-resolution CFD simulations of turbulent, free-surface flows around ship hulls. The framework consists in the concatenation of ＂tools＂, partly available in the open-source finite volume library OpenFOAM. A novel, flexible mesh-generation algorithm is presented, capable of producing high-quality computational grids for free-surface ship hydrodynamics. The numerical frame work is used to solve some benchmark problems, providing results that are in excellent agreement with the experimental measures.

Fully Nonlinear Simulation for Fluid/Structure Impact：A Review

This paper presents a review of the work on fluid/structure impact based on inviscid and imcompressible liquid and irrotational flow. The focus is on the velocity potential theory together with boundary element method （BEM）. Fully nonlinear boundary conditions are imposed on the unknown free surface and the wetted surface of the moving body. The review includes （1） vertical and oblique water entry of a body at constant or a prescribed varying speed, as well as free fall motion, （2） liquid droplets or column impact as well as wave impact on a body, （3） similarity solution of an expanding body. It covers two dimensional （2D）, axisymmetric and three dimensional （3D） cases. Key techniques used in the numerical simulation are outlined, including mesh generation on the multivalued free surface, the stretched coordinate system for expanding domain, the auxiliary function method for decoupling the mutual dependence of the pressure and the body motion, and treatment for the jet or the thin liquid film developed during impact.