Catalytic performance of highly dispersed WO_3 loaded on CeO_2 in the selective catalytic reduction of NO by NH_3

The influence of tungsten trioxide(WO3)loading on the selective catalytic reduction(SCR)of nitric oxide(NO)by ammonia(NH3)over WO3/cerium dioxide(CeO2)was investigated.The NO conversion first rose and then declined with increasing WO3loading.It was found that the crystalline WO3in the1.6WO3/CeO2sample could be removed in25wt%ammonium hydroxide at70°C,which improved the catalytic activity of the sample.The obtained samples were characterized by X‐ray diffraction,Raman spectroscopy,X‐ray photoelectron spectroscopy,hydrogen(H2)temperature programmed reduction,NH3temperature programmed desorption,and in situ diffuse reflectance infrared Fourier transform spectroscopy.The results revealed that the dispersed WO3promoted the catalytic activity of WO3/CeO2while the crystalline WO3inhibited catalytic activity.The oxygen activation of CeO2was inhibited by the coverage of WO3,which weakened NO oxidation and adsorption of nitrate species over WO3/CeO2.In addition,the NH3adsorption performance on CeO2was improved by modification with WO3.NH3was the most stable adsorbed species under NH3SCR reaction conditions.In situ DRIFT spectra suggested that the NH3SCR reaction proceeded via the Eley‐Rideal mechanism over WO3/CeO2.Thus,when the loading of WO3was close to the dispersion capacity,the effects of NH3adsorption and activation were maximized to promote the reaction via the Eley‐Rideal route.

In situ preparation of mesoporous Fe/TiO_2 catalyst using Pluronic F127-assisted sol-gel process for mid-temperature NH_3 selective catalytic reduction

An Fe/TiO2catalyst with uniform mesopores was synthesized using Pluronic F127as a structuredirecting agent.This catalyst was used for selective catalytic reduction of NO with NH3.The catalytic activity and resistance to H2O and SO2of Fe/TiO2prepared by a template method were better than those of catalysts synthesized using impregnation and coprecipitation.The samples were characterized using N2‐physisorption,transmission electron microscopy,ultraviolet‐visibl spectroscopy,X‐ray photoelectron spectroscopy,and in situ diffuse reflectance infrared Fouriertransform spectroscopy.The results showed that Pluronic F127acted as a structural and chemical promoter;it not only promoted the formation of a uniform mesoporous structure,leading to a higher surface area,but also improved dispersion of the active phase.In addition,the larger number of Lewis acidic sites,indicated by the presence of coordinated NH3species(1188cm-1)and the N–H stretching modes of coordinated NH3(3242and3388cm-1),were beneficial to mid‐temperature selective catalytic reduction reactions.

TiO_2-Supported Binary Metal Oxide Catalysts for Low-temperature Selective Catalytic Reduction of NO_x with NH_3

Binary metal oxide（MnOx-A/TiO2）catalysts were prepared by adding the second metal to manganese oxides supported on titanium dioxide（TiO2）,where,A indicates Fe2O3,WO3,MoO3,and Cr2O3.Their catalytic activity,N2 selectivity,and SO2 poisonous tolerance were investigated.The catalytic performance at low temperatures decreased in the following order：Mn-W/TiO2〉Mn-Fe/TiO2〉Mn-Cr/TiO2〉Mn-Mo/TiO2,whereas the N2 selectivity decreased in the order：Mn-Fe/TiO2〉Mn-W/TiO2〉Mn-Mo/TiO2〉Mn-Cr/TiO2.In the presence of 0.01%SO2 and 6%H2O,the NOx conversions in the presence of Mn-W/TiO2,Mn-Fe/TiO2,or Mn-Mo/TiO2 maintain 98.5%,95.8%and 94.2%, respectively,after 8 h at 120°C at GHSV 12600 h？ 1 .As effective promoters,WO3 and Fe2O3 can increase N2 selectivity and the resistance to SO2 of MnOx/TiO2 significantly.The Fourier transform infrared（FTIR）spectra of NH3 over WO3 show the presence of Lewis acid sites.The results suggest that WO3 is the best promoter of MnOx/TiO2,and Mn-W/TiO2 is one of the most active catalysts for the low temperature selective catalytic reduction of NO with NH3.

Performance and Kinetics Studies on Selective Catalytic Reduction of NOx with NH_3 over MnO_x-WO_3/TiO_2 Catalyst

The catalytic activities of MnOx-WO3/TiO2 for selective catalytic reduction（SCR） of NO with NH3 were investigated in a wide range of temperature and reaction condition.It yielded a NOx conversion of 80.3%—99.6% and a N2 product selectivity of 100%—98.7% during 100 °C to 350 °C at gas hourly space velocity（GHSV）=18900 h-1.In the presence of 0.01% SO2 and 6% H2O at 120 °C,the NOx conversion can maintain 98.5%.At 300 °C and with 0.07% SO2 in reactant stream,the NOx conversion stabilized at 99% as high as the commercial V-W/TiO2 catalyst＇s level.The steady-state kinetics study shows that O2 played a promoting role.In the presence of less than 1.5% O2,NOx conversion can increase sharply with the increase of O2 concentration.The reaction order was zero with respect to NH3 and first with respect to NO with excess O2 and H2O.The kinetics active energy（Ea） of Mn-W/TiO2 was calculated to be 6.24 kJ/mol according to the kinetic experiment at various temperatures,much lower than those of other catalysts reported in the literature.Mn-W/TiO2 is an excellent catalyst for SCR of NO with NH3 by now.

Low-temperature activity and mechanism of WO_3-modified CeO_2-TiO_2 catalyst under NH_3-NO/NO_2 SCR conditions

The CeO2‐TiO2(CeTi)and CeO2/WO3‐TiO2(CeWTi)catalysts were prepared by a sol‐gel precipitation method and their NH3‐NO/NO2 selective catalytic reduction(SCR)performance was studied.N2O formation and effect of oxygen concentration on SCR performance over CeWTi catalyst were also investigated while varying the NO2/NOx ratio.Results indicate that fast SCR behavior of CeWTi catalyst has the best NH3‐NO/NO2 SCR performance due to the catalyst reoxidation rate by NO2 higher than by O2.Compared with CeTi catalyst,CeWTi catalyst exhibits higher de‐NOx performance under NH3‐NO/NO2 SCR conditions.As the CeTi and CeWTi catalysts exhibit similar redox property,addition of WO3 provides more acid sites which accelerate the reaction between NH4NO3 and NO to get a superior low‐temperature activity.Amount of N2O formation shows a peak at 250 oC mainly derived from NH4NO3 decomposition.

Chemical deactivation of Cu-SAPO-18 deNO_x catalyst caused by basic inorganic contaminants in diesel exhaust

Contaminants(K,Na,Ca,and Mg)were introduced into Cu-SAPO-18 via incipient wetness impregnation to investigate their effect on the selective catalytic reduction of NOx with NH3(NH3-SCR)over Cu-SAPO-18.After the introduction of contaminants into Cu-SAPO-18,the quantity of acidic sites and Cu^2+ species in catalyst decreases owing to the replacement of H^+ and Cu^2+ by K^+,Na^+,Ca^2+,and Mg^2+.Furthermore,the loss of isolated Cu^2+ induces the generation of CuO and CuAl2O4-like phases,which causes further loss in the Brunauer-Emmett-Teller surface area of the catalyst.Consequently,the deNOx performance of the contaminated Cu-SAPO-18 catalysts drops.Such decline in NH3-SCR performance becomes more pronounced by increasing the contaminant contents from 0.5 to 1.0 mmol/gcatal.In addition,the deactivation influence of the contaminants on Cu-SAPO-18 is presented in the order of K>Na>Ca>Mg,which is consistent with the order of reduction of acidic sites.To a certain degree,the effect of the acidic sites on the deactivation of Cu-SAPO-18 might be more significant than that of isolated Cu2+ and the catalyst framework.Moreover,kinetic analysis of NH3-SCR was conducted,and the results indicate that there is no influence of contaminants on the NH3-SCR mechanism.

Effect of Ce doping into V_(2)O_(5)-WO_(3)/TiO_(2) catalysts on the selective catalytic reduction of NO_(x) by NH_(3)

In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied comparatively by various experimental techniques. The results showed that the NO conversion of V2O5-WO3/CeO2-TiO2 catalysts modified by co-precipitation method obviously increased with the Ce doping contents in the studied range below 20%（All Ce contents are in mass fractions）, but the NO conversion of V2O5-WO3/CeO2/TiO2 catalysts modified by impregnation methods was lower than V2O5-WO3/CeO2-TiO2 catalysts especially beyond 2.5% Ce doping contents. The V2O5-WO3/CeO2-TiO2 catalysts showed better SCR activity, wider reaction window, and higher sulfur and water resistance. The characterization results elucidated that the modified catalysts by co-precipitation method exhibited higher specific surface area, much better dispersity of Ce component, more Ce^（3＋）species and more Br？nsted acid sites than that by impregnation. The vacancies caused by more Ce^（3＋）species were favorable for more NO oxidation to NO2, and the interaction between Ce species and WOxspecies generated more Br？nsted acid sites. It could be supposed that dispersed Ce Oxspecies and WOxspecies offered more second active centers respectively to adsorb oxygen and activate ammonia as co-catalysis to the primary active center of V ions, thus facilitated the better SCR activity of modified V2O5-WO3/CeO2-TiO2 catalysts by coprecipitation methods. The co-precipitation methods with Ce component were more suitable for production of modified commercial V2O5-WO3/TiO2 catalysts.