Low-Temperature Carbonized Nitrogen-Doped Hard Carbon Nanofiber Toward High-Performance Sodium-Ion Capacitors

Carbon nanofiber(CNF)was widely utilized in the field of electrochemical energy storage due to its superiority of conductivity and mechanics.However,CNF was generally prepared at relatively high temperature.Herein,nitrogen-doped hard carbon nanofibers(NHCNFs)were prepared by a lowtemperature carbonization treatment assisted with electrospinning technology.Density functional theory analysis elucidates the incorporation of nitrogen heteroatoms with various chemical states into carbon matrix would significantly alter the total electronic configurations,leading to the robust adsorption and efficient diffusion of Na atoms on electrode interface.The obtained material carbonized at 600°C(NHCNF-600)presented a reversible specific capacity of 191.0 mAh g^(−1)and no capacity decay after 200 cycles at 1 A g^(−1).It was found that the sodium-intercalated degree had a correlation with the electrochemical impedance.A sodium-intercalated potential of 0.2 V was adopted to lower the electrochemical impedance.The constructed sodium-ion capacitor with activated carbon cathode and presodiated NHCNF-600 anode can present an energy power density of 82.1 Wh kg^(−1)and a power density of 7.0 kW kg^(−1).

PtZn nanoparticles supported on porous nitrogen-doped carbon nanofibers as highly stable electrocatalysts for oxygen reduction reaction

The oxygen reduction reaction(ORR)electrocatalytic activity of Pt-based catalysts can be significantly improved by supporting Pt and its alloy nanoparticles(NPs)on a porous carbon support with large surface area.However,such catalysts are often obtained by constructing porous carbon support followed by depositing Pt and its alloy NPs inside the pores,in which the migration and agglomeration of Pt NPs are inevitable under harsh operating conditions owing to the relatively weak interaction between NPs and carbon support.Here we develop a facile electrospinning strategy to in-situ prepare small-sized PtZn NPs supported on porous nitrogen-doped carbon nanofibers.Electrochemical results demonstrate that the as-prepared PtZn alloy catalyst exhibits excellent initial ORR activity with a half-wave potential(E_(1/2))of 0.911 V versus reversible hydrogen electrode(vs.RHE)and enhanced durability with only decreasing 11 mV after 30,000 potential cycles,compared to a more significant drop of 24 mV in E_(1/2)of Pt/C catalysts(after 10,000 potential cycling).Such a desirable performance is ascribed to the created triple-phase reaction boundary assisted by the evaporation of Zn and strengthened interaction between nanoparticles and the carbon support,inhibiting the migration and aggregation of NPs during the ORR.

Nitrogen-doped porous carbon nanosheets as both anode and cathode for advanced potassium-ion hybrid capacitors

Potassium-ion hybrid capacitors(PIHCs)as a burgeoning research hotspot are an ideal replacement for lithium-ion hybrid capacitors(LIHCs).Here,we report nitrogen-doped porous carbon nanosheets(NPCNs)with enlarged interlayer spacing,abundant defects,and favorable mesoporous structures.The structural changes of NPCNs in potassiation and depotassiation processes are analyzed by using Raman spectroscopy and transmission electron microscopy.Due to the unique structure of NPCNs,the PIHC device assembled using NPCNs as both the anode and cathode material(double-functional self-matching material)exhibits a superior energy density of 128 Wh kg^(-1)with a capacity retention of 90.8%after 9000 cycles.This research can promote the development of double-functional self-matching materials for hybrid energy storage devices with ultra-high performance.

Hollow cobalt oxide nanoparticles embedded in nitrogen-doped carbon nanosheets as an efficient bifunctional catalyst for Zn–air battery

Rational design of low-cost, highly electrocatalytic activity, and stable bifunctional electrocatalysts for oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) has been a great significant for metal–air batteries. Herein, an efficient bifunctional electrocatalyst based on hollow cobalt oxide nanoparticles embedded in nitrogen-doped carbon nanosheets(Co/N-Pg) is fabricated for Zn–air batteries. A lowcost biomass peach gum, consisting of carbon, oxygen, and hydrogen without other heteroatoms, was used as carbon source to form carbon matrix hosting hollow cobalt oxide nanoparticles. Meanwhile, the melamine was applied as nitrogen source and template precursor, which can convert to carbon-based template graphitic carbon nitride by polycondensation process. Owing to the unique structure and synergistic effect between hollow cobalt oxide nanoparticles and Co-N-C species, the proposal Co/N-Pg catalyst displays not only prominent bifunctional electrocatalytic activities for ORR and OER, but also excellent durability. Remarkably, the assembled Zn–air battery with Co/N-Pg air electrode exhibited a low discharge-charge voltage gap(0.81 V at 50 mA cm^-2) and high peak power density(119 mW cm^-2) with long-term cycling stability. This work presents an effective approach for engineering transition metal oxides and nitrogen modified carbon nanosheets to boost the performance of bifunctional electrocatalysts for Zn–air battery.

Hierarchically porous nitrogen-doped carbon as cathode for lithium–sulfur batteries

Porous nitrogen-doped carbon is an especially promising material energy storage due to its excellent conductivity, stable physicochemical properties, easy processability, controllable porosity and low price.Herein, we reported a novel well-designed hierarchically porous nitrogen-doped carbon(HPNC) via a combination of salt template(ZnCl_2) and hard template(SiO_2) as sulfur host for lithium–sulfur batteries. The low-melting ZnCl_2 is boiled off and leaves behind micropores and small size mesopores during pyrolysis process, while the silica spheres are removed by acid leaching to generate interconnected 3D network of macropores. The HPNC-S electrode exhibits an initial specific capacity of 1355 mAh g^(–1) at 0.1 C(1 C = 1675 m Ah g^(–1)), a high-rate capability of 623 m Ah g^(–1) at 2 C, and a small decay of 0.13% per cycle over 300 cycles at 0.2 C. This excellent rate capability and remarkable long-term cyclability of the HPNC-S electrode are attributed to its hierarchical porous structures for confining the soluble lithium polysulfide as well as the nitrogen doping for high absorbability of lithium polysulfide.

Novel Ag@Nitrogen-doped Porous Carbon Composite with High Electrochemical Performance as Anode Materials for Lithium-ion Batteries

A novel Ag@nitrogen-doped porous carbon(Ag-NPC) composite was synthesized via a facile hydrothermal method and applied as an anode material in lithium-ion batteries(LIBs). Using this method, Ag nanoparticles(Ag NPs) were embedded in NPC through thermal decomposition of Ag NO_3 in the pores of NPC. The reversible capacity of Ag-NPC remained at 852 m Ah g^(-1)after 200 cycles at a current density of 0.1 A g^(-1), showing its remarkable cycling stability. The enhancement of the electrochemical properties such as cycling performance,reversible capacity and rate performance of Ag-NPC compared to the NPC contributed to the synergistic effects between Ag NPs and NPC.

Controllable synthesis of nitrogen-doped porous carbon from metal-polluted miscanthus waste boosting for supercapacitors

High-value reclamation of metal-polluted plants involved in phytoremediation is a big challenge.In this study,nitrogen-doped nanoporous carbon with large specific area of 2359.1 m^(2)g^(-1) is facilely fabricated from metal-polluted miscanthus waste for efficient energy storage.The synergistic effect of KOH,urea and ammonia solution greatly improve the nitrogen quantity and surface area of the synthesized carbon.Electrodes fabricated with this carbon exhibit the excellent capacitance performance of 340.2 F g^(-1) at 0.5 A g^(-1) and a low combined resistance of 0.116Ω,which are competitive with most of previously reported carbon-based electrodes.In addition,the as-obtained carbon electrode shows a high specific capacitance retention of over 99.6%even after 5000 cycles.Furthermore,the symmetric supercapacitor fabricated using the synthesized carbon achieves a superior energy density of 25.3 Wh kg^(-1)(at 400 W kg^(-1))in 1 mol L^(-1) Na_(2)SO_(4)aqueous solution.This work provides an efficient route to upcycle metal-polluted plant waste for supercapacitor applications.

Highly Dispersed Cobalt Nanoparticles Embedded in Nitrogen-Doped Graphitized Carbon for Fast and Durable Potassium Storage

Potassium-ion batteries(KIBs)have great potential for applications in large-scale energy storage devices.However,the larger radius of K+leads to sluggish kinetics and inferior cycling performance,severely restricting its practical applicability.Herein,we propose a rational strategy involving a Prussian blue analogue-derived graphitized carbon anode with fast and durable potassium storage capability,which is constructed by encapsulating cobalt nanoparticles in nitrogen-doped graphitized carbon(Co-NC).Both experimental and theoretical results show that N-doping effectively promotes the uniform dispersion of cobalt nanoparticles in the carbon matrix through Co-N bonds.Moreover,the cobalt nanoparticles and strong Co-N bonds synergistically form a threedimensional conductive network,increase the number of adsorption sites,and reduce the diffusion energy barrier,thereby facilitating the adsorption and the diffusion kinetics.These multiple effects lead to enhanced reversible capacities of 305 and 208.6 mAh g^−1 after 100 and 300 cycles at 0.05 and 0.1 A g^−1,respectively,demonstrating the applicability of the Co-NC anode for KIBs.

Nitrogen-doped carbon nanotube encapsulating cobalt nanoparticles towards efficient oxygen reduction for zinc–air battery

Nitrogen-doped carbon materials encapsulating 3 d transition metals are promising alternatives to replace noble metal Pt catalysts for efficiently catalyzing the oxygen reduction reaction(ORR). Herein, we use cobalt substituted perfluorosulfonic acid/polytetrafluoroethylene copolymer and dicyandiamide as the pyrolysis precursor to synthesize nitrogen-doped carbon nanotube(N–CNT) encapsulating cobalt nanoparticles hybrid material. The carbon layers and specific surface area of N–CNT have a critical role to the ORR performance due to the exposed active sites, determined by the mass ratio of the two precursors. The optimum hybrid material exhibits high ORR activity and stability, as well as excellent performance and durability in zinc–air battery.

Novel Co_3O_4 Nanoparticles/Nitrogen-Doped Carbon Composites with Extraordinary Catalytic Activity for Oxygen Evolution Reaction(OER)

Herein, Co_3O_4 nanoparticles/nitrogen-doped carbon(Co_3O_4/NPC) composites with different structures were prepared via a facile method. Structure control was achieved by the rational morphology design of ZIF-67 precursors, which were then pyrolyzed in air to obtain Co_3O_4/NPC composites. When applied as catalysts for the oxygen evolution reaction(OER), the M-Co_3O_4/NPC composites derived from the flower-like ZIF-67 showedsuperior catalytic activities than those derived from the rhombic dodecahedron and hollow spherical ZIF-67. The former M-Co_3O_4/NPC composite displayed a small overpotential of 0.3 V, low onset potential of 1.41 V, small Tafel slope of 83 m V dec^(-1), and a desirable stability.(94.7% OER activity was retained after 10 h.) The excellent performance of the flower-like M-Co_3O_4/NPC composite in the OER was attributed to its favorable structure.

Electrocatalytic hydrogen peroxide formation on mesoporous non-metal nitrogen-doped carbon catalyst

Direct electrochemical formation of hydrogen peroxide(H2O2) from pure O2 and H2on cheap metal-free earth abundant catalysts has emerged as the highest atom-efficient and environmentally friendly reaction pathway and is therefore of great interest from an academic and industrial point of view. Very recently,novel metal-free mesoporous nitrogen-doped carbon catalysts have attracted large attention due to the unique reactivity and selectivity for the electrochemical hydrogen peroxide formation [1–3]. In this work,we provide deeper insights into the electrocatalytic activity, selectivity and durability of novel metal-free mesoporous nitrogen-doped carbon catalyst for the peroxide formation with a particular emphasis on the influence of experimental reaction parameters such as p H value and electrode potential for three different electrolytes. We used two independent approaches for the investigation of electrochemical hydrogen peroxide formation, namely rotating ring-disk electrode(RRDE) technique and photometric UV–VIS technique. Our electrochemical and photometric results clearly revealed a considerable peroxide formation activity as well as high catalyst durability for the metal-free nitrogen-doped carbon catalyst material in both acidic as well as neutral medium at the same electrode potential under ambient temperature and pressure. In addition, the obtained electrochemical reactivity and selectivity indicate that the mechanisms for the electrochemical formation and decomposition of peroxide are strongly dependent on the p H value and electrode potential.

Nitrogen-doped hierarchically porous carbon spheres for low concentration CO_(2) capture

Synthesis of spherical carbon beads with effective CO_2 capture capability is highly desirable for large scale application of CO2 sorption, but remains challenging. Herein, a facile and efficient strategy to prepare nitrogen-doped hierarchically porous carbon spheres was developed via co-pyrolyzation of poly(vinylidene chloride) and melamine in alginate gel beads. In this approach, melamine not only serves as the nitrogen precursor, but also acts as a template for the macropores structures. The nitrogen contents in the hierarchically porous carbon spheres reach a high level, ranging from 11.8 wt% to 14.7 wt%, as the melamine amount increases. Owing to the enriched nitrogen functionalities and the special hierarchical porous structure, the carbon spheres exhibit an outstanding CO_2 capture performance, with the dynamic capacity of as much as about 7 wt% and a separation factor about 49 at 25 °C in a gas mixture of CO_2/N_2(0.5:99.5, v/v).

Nitrogen-doped hierarchical porous carbon from polyaniline/silica self-aggregates for supercapacitor

In this paper, nitrogen-doped hierarchical porous carbon(N-HPC) was prepared from polyaniline(PANI)/silica self-aggregates. H-bonding between N\\H groups in aniline/PANI and \\OH groups in nano silica template led to a self-assembly type, which enabled the formation of uniform N-HPC nanoparticles. Silica self-aggregates provided macroporous channels resulted in a decreased diffusion distance. After removing the hard template,the N-HPC had a high surface area(899 m^2·g^(-1)). Owing to two co-existed synergetic energy-storage mechanisms and the hierarchical porous structure, the obtained N-HPC exhibited a high specific capacitance of 218.75 F·g^(-1) at 0.5 A·g^(-1), compared with the nonporous nitrogen-doped carbon(N-C) derived from pure PANI. Moreover, the N-HPC electrode demonstrated excellent cycle life, retaining 99% of its initial specific capacitance after 1000 cycles.

Nitrogen-doped hierarchical few-layered porous carbon for efficient electrochemical energy storage

Large surface area,high conductivity,and rich active site of carbon electrode materials are necessary characteristics for energy storage devices.However,high conductivity and high nitrogen doping of carbon electrode materials are difficult to coordinate.Here,a facile method via the carbonization of nitrogen-containing Schiff base polymer has been developed to prepare high conductivity and high nitrogen-doped hierarchical porous carbon.The organic components with a benzene ring structure in the polymer promote the formation of more sp^(2)-graphitized carbon,which is beneficial for the improvement of electrical conductivity.Nitrogen-doped hierarchical porous carbon calcined at 900℃ under the NH3 atmosphere possesses high nitrogen content of 7.48 at%,a large specific surface area of 1613.2m2/g,and high electrical conductivity of 2.7 S/cm.As electrode materials in an aqueous-based supercapacitor,nitrogen-doped hierarchical porous carbon exhibits superior specific capacitance of 385 F/g at 1 A/g as well as excellent rate performance(242 and 215 F/g at a current density of 100 and 200 A/g,respectively).In addition,the specific capacitance of electrode measured in a two-electrode system is 335 F/g at 1 A/g,and the long-term cycling stability can be achieved with more than 94%initial capacitance after 10000 cycles.The constructed symmetric supercapacitor delivers high energy density and high power density.The outstanding electrochemical performances combined with the novel and scalable synthetic approach make the nitrogen‐doped hierarchical porous carbon potential electrode material for electrochemical devices.

Heterogeneous single-cluster catalysts(Mn_(3),Fe_(3),Co_(3),and Mo_(3))supported on nitrogen-doped graphene for robust electrochemical nitrogen reduction

Electrochemical nitrogen reduction reaction(NRR)is one of the most promising alternatives to the traditional Haber-Bosch process.Designing efficient electrocatalysts is still challenging.Inspired by the recent experimental and theoretical advances on single-cluster catalysts(SCCs),we systematically investigated the catalytic performance of various triple-transition-metal-atom clusters anchored on nitrogen-doped graphene for NRR through density functional theory(DFT)calculation.Among them,Mn_(3)-N4,Fe_(3)-N4,Co_(3)-N4,and Mo_(3)-N4 were screened out as electrocatalysis systems composed of non-noble metal with high activity,selectivity,stability,and feasibility.Particularly,the Co_(3)-N4 possesses the highest activity with a limiting potential of-0.41 V through the enzymatic mechanism.The outstanding performance of Co_(3)-N4 can be attributed to the unique electronic structure leading to strong π backdonation,which is crucial in effective N_(2) activation.This work not only predicts four efficient non-noble metal electrocatalysts for NRR,but also suggest the SCCs can serve as potential candidates for other important electrochemical reactions.

Facile synthesis of molybdenum carbide nanoparticles in situ decorated on nitrogen-doped porous carbons for hydrogen evolution reaction

Molybdenum-based electrocatalysts are promising candidates of platinum (Pt)-based materials in electrocatalyzing hydrogen evolution reaction (HER), due to their cost-efficient and resembled electronic properties. Reported herein is the preparation of molybdenum carbide nanoparticles uniformly decorated on nitrogen-modified carbons (Mo2C/NC) through the carbonization of Mo-based polymers under hydrogen atmosphere by using poly(p-phenylenediamine) and ammonium heptamolybdate polymer analogue as precursors. And the molybdenum nitride nanoparticles loaded on porous N-doped carbons (Mo2N/NC) are also fabricated by calcination the polymer precursors in nitrogen gas. The Mo2C/NC shows more excellent electrocatalytic activity than Mo2N/NC in 0.5 M H2SO4, together with robust long-term durability. The well-crystalline nanoparticles and the increased electron conductivity are the main characters responded for the high catalytic efficiency of the fabricated electrocatalysts. This easily fabrication procedure may provide a facile route to prepare non-noble metal carbide/nitride catalysts featuring wellengineered structural and textural peculiarities for realistic energy conversion system.

Synthesis of alumina-nitrogen-doped carbon support for CoMo catalysts in hydrodesulfurization process

More stringent environmental legislation imposes severe requirements to reduce the sulfur content in diesel to ultra-low levels with high efficient catalysts.In this paper,a series of CoMo/NDC@alumina catalysts were synthesized by combination of the chemical vapor deposition of nitrogen-doped carbon(NDC)using 1,10-phenanthroline and co-impregnation of Mo and Co active components.The optimal catalyst with additive of 25%1,10-phenanthroline was screened by a series of property characterization and the hydrodesulfrization(HDS)active test.The amount of“CoMoS”active phase of the optimal CoMo/C3 catalyst increased 5.3%as compared with the CoMo/c-Al_(2)O_(3).The introduction of NDC improved the sulfidation degree of Mo by 21.8%as compared to the CoMo/c-Al_(2)O_(3) catalyst,which was beneficial to form more active sites.The HDS conversion of the NDC supported catalysts are higher than CoMo/c-Al_(2)O_(3) whether for the dibenzothiophene(DBT)or 4,6-dimethyl dibenzothiophene(4,6-DMDBT).Further hydroprocessing evaluation with Dagang diesel revealed that the CoMo/C3 catalyst possessed higher HDS property and the removal rate of DBTs in the diesel increased by 4%–11%as compared to the CoMo/c-Al_(2)O_(3) catalyst.

Nitrogen-doped carbon encapsulated in mesoporous TiO2 nanotubes for fast capacitive sodium storage

Controllable synthesis of insertion-type anode materials with beneficial micro-and nanostructures is a promising approach for the synthesis of sodium-ion storage devices with high-reactivity and excellent electrochemical performance.In this study,we developed a sacrificial-templating route to synthesize TiO_(2)@N-doped carbon nanotubes(TiO_(2)@NC-NTs)with excellent electrochemical performance.The asprepared mesoporous TiO_(2)@NC-NTs with tiny nanocrystals of anatase TiO_(2) wrapped in N-doped carbon layers showed a well-defined tube structure with a large specific surface area of 198 m^(2) g^(-1) and a large pore size of~5 nm.The TiO_(2)@NC-NTs delivered high reversible capacities of 158 m A h g^(-1) at 2 C(1 C=335 m A g^(-1))for 2200 cycles and 146 m A h g^(-1) at 5 C for 4000 cycles,as well as an ultrahigh rate capability of up to 40 C with a capacity of 98 m A h g^(-1).Even at a high current density of 10 C,a capacity of 138 m A h g^(-1) could be delivered over 10,000 cycles.Thus,the synthesis of mesoporous TiO_(2)@NC-NTs was demonstrated to be an efficient approach for developing electrode materials with high sodium storage and long cycle life.

Ultrafine VN nanodots induced generation of abundant cobalt single-atom active sites on nitrogen-doped carbon nanotube for efficient hydrogen evolution

Development of highly active and stable non-noble electrocatalysts with well-defined nanostructures is crucial for efficient hydrogen evolution reaction(HER). Herein, a novel three-dimensional(3D) selfsupported electrode consists of vanadium nitride(VN) nanodots and Co nanoparticles co-embedded and highly active single Co atoms anchored in N-doped carbon nanotubes supported on carbon cloth(VN-Co@CoSAs-NCNTs/CC) is fabricated via a one-step in situ nanoconfined pyrolysis strategy, which shows remarkable enhanced HER electrocatalytic activity in acidic medium. During pyrolysis, the formed VN nanodots induce the generation of atomic Co Nxsites in NCNTs, contributing to superior electrocatalytic activity. Experimental and density functional theory(DFT) calculation results reveal that the electrode has multiple accessible active sites, fast reaction kinetics, low charge/mass transfer resistances,high conductivity, as well as downshifted d-band center with a thermodynamically favorable hydrogen adsorption free energy(△G_(H·)), all of which greatly boost the HER performance. As a result, the VNCo@CoSAs-NCNTs/CC electrode displays superb catalytic performance toward HER with a low overpotential of 29 mV at 10 mA cm^(-2) in acidic medium, which could maintain for at least 60 h of stable performance. This work opens a facile avenue to explore low-cost, high performance, but inexpensive metals/nitrogen-doped carbon composite electrocatalysts for HER.