In this paper, the characteristics of the preparation of novolacs for the shell process under microwaveirradiation are investigated. Both polymerization and dehydration of the resins under microwave irradiation are co...In this paper, the characteristics of the preparation of novolacs for the shell process under microwaveirradiation are investigated. Both polymerization and dehydration of the resins under microwave irradiation are comparedwith those under conventional heating and further analysis is made. The results show that compared with those underconventional heating, the polymerization and dehydration time under microwave irradiation are shortened by 85.2% and80.7% respectively; On the other hand, the polymerization and dehydration under microwave irradiation lead to aremarkable increase in flow distance of the resins. Furthermore, the polymerization under microwave irradiation leads toreduced cure time, while the dehydration under microwave irradiation causes a slight increase in cure time.展开更多
In this study on the curing dynamics of phenol-formaldehyde novolac resins(PFNR) and hexamethylene tetramine(HMTA), two typical commercial PFNR were selected as examples and the curing reactions of the resins with HMT...In this study on the curing dynamics of phenol-formaldehyde novolac resins(PFNR) and hexamethylene tetramine(HMTA), two typical commercial PFNR were selected as examples and the curing reactions of the resins with HMTA were studied by differential scanning calorimetry(DSC). Based on the data calculated by the Kissinger equation and the Crane equation, a thermocuring dynamic model was established, from which the process conditions, activation energy, reaction kinetics equation and a f irst-order reaction of the curing reactions were derived.展开更多
Novolacs were successfully synthesized using oxalic acid as the catalyst in a self-designed device based on a domestic microwave oven, The fundamental characteristics of the synthesis of novolacs under microwave irrad...Novolacs were successfully synthesized using oxalic acid as the catalyst in a self-designed device based on a domestic microwave oven, The fundamental characteristics of the synthesis of novolacs under microwave irradiation （MI） were investigated, and the properties of the resins polymerized and dehydrated under microwave irradiation and conventional heating （CH） were analyzed comparatively, The results show that MI reduced the polymerization and dehydration time greatly; and that the resins polymedzed and dehydrated under MI presented longer flow distances （ i. e., higher flowability） and shorter cure time than those obtained under CH.展开更多
The synergistic effect of phosphorus oxynitride（PON） with a novolac-based char former modified by salification （NA-metal salt） on the flame retardance of polyamide 6（PA6） was investigated.For this purpose,variou...The synergistic effect of phosphorus oxynitride（PON） with a novolac-based char former modified by salification （NA-metal salt） on the flame retardance of polyamide 6（PA6） was investigated.For this purpose,various flame-retardant PA6 systems were melt-compounded with PON,PON/NA,PON/NA-V_2O_5 and PON/NA-Fe_2O_3,and their flame retardance was evaluated by measuring the limiting oxygen index（LOI） values and UL-94 vertical burning ratings.The results showed that,compared with the PA6/PON/NA system,the combination of two char formers（NA-V_2O_5,NA-Fe_2O_3） with PON could obviously improve the char formation and flame retardance of PA6.The flame retardance and cone calorimetric analyses showed the stronger synergism as well as the better flame retardant performance of PON/NA-Fe_2O_3 flame retardant system. The effects of different char formers on the flame retardance and thermal stability of this system were also discussed.展开更多
Carborane bisphenol novolacs （3 and 4） were synthesized in the presence of acid catalyst from carborane bisphenols （5 and 6） and formaldehyde. Further epoxidization of carborane bisphenol novolacs with epichlorohy...Carborane bisphenol novolacs （3 and 4） were synthesized in the presence of acid catalyst from carborane bisphenols （5 and 6） and formaldehyde. Further epoxidization of carborane bisphenol novolacs with epichlorohydrin gave carborane bisphenol epoxy novolacs （1 and 2）. The molecular weight and epoxy value of obtained resins were determined using the molecular weight of their precursors. The epoxy values of 1 and 2 were 0.48 and 0.52 respectively, higher than the maximum theoretical epoxy value （0.45） of difunctional carborane bisphenol epoxy resins. FTIR and NMR were utilized to characterize 1 and 2. The curing behaviors were also studied by DSC and the optimized curing conditions were obtained. TGA analysis indicated that carborane moiety could shield its adjacent organic structures against initial decomposition. On the other hand, B--H on carborane cage could react with oxygen to form a three-dimensional network linked by B--O--B and B--C bonds, which further blocked the movement of formed radicals and thus the degradation process was inhibited.展开更多
文摘In this paper, the characteristics of the preparation of novolacs for the shell process under microwaveirradiation are investigated. Both polymerization and dehydration of the resins under microwave irradiation are comparedwith those under conventional heating and further analysis is made. The results show that compared with those underconventional heating, the polymerization and dehydration time under microwave irradiation are shortened by 85.2% and80.7% respectively; On the other hand, the polymerization and dehydration under microwave irradiation lead to aremarkable increase in flow distance of the resins. Furthermore, the polymerization under microwave irradiation leads toreduced cure time, while the dehydration under microwave irradiation causes a slight increase in cure time.
基金financially supported by the Fundamental Research Funds for the Central Universities of China(SWU.113003 and XDJK 2015C097)
文摘In this study on the curing dynamics of phenol-formaldehyde novolac resins(PFNR) and hexamethylene tetramine(HMTA), two typical commercial PFNR were selected as examples and the curing reactions of the resins with HMTA were studied by differential scanning calorimetry(DSC). Based on the data calculated by the Kissinger equation and the Crane equation, a thermocuring dynamic model was established, from which the process conditions, activation energy, reaction kinetics equation and a f irst-order reaction of the curing reactions were derived.
文摘Novolacs were successfully synthesized using oxalic acid as the catalyst in a self-designed device based on a domestic microwave oven, The fundamental characteristics of the synthesis of novolacs under microwave irradiation （MI） were investigated, and the properties of the resins polymerized and dehydrated under microwave irradiation and conventional heating （CH） were analyzed comparatively, The results show that MI reduced the polymerization and dehydration time greatly; and that the resins polymedzed and dehydrated under MI presented longer flow distances （ i. e., higher flowability） and shorter cure time than those obtained under CH.
基金financially supported by the Key Project of the National Natural Science Foundation of China (No.50933005)
文摘The synergistic effect of phosphorus oxynitride（PON） with a novolac-based char former modified by salification （NA-metal salt） on the flame retardance of polyamide 6（PA6） was investigated.For this purpose,various flame-retardant PA6 systems were melt-compounded with PON,PON/NA,PON/NA-V_2O_5 and PON/NA-Fe_2O_3,and their flame retardance was evaluated by measuring the limiting oxygen index（LOI） values and UL-94 vertical burning ratings.The results showed that,compared with the PA6/PON/NA system,the combination of two char formers（NA-V_2O_5,NA-Fe_2O_3） with PON could obviously improve the char formation and flame retardance of PA6.The flame retardance and cone calorimetric analyses showed the stronger synergism as well as the better flame retardant performance of PON/NA-Fe_2O_3 flame retardant system. The effects of different char formers on the flame retardance and thermal stability of this system were also discussed.
基金financially supported by the Fundamental Research Funds for the Central Universities(No.JD-1512)
文摘Carborane bisphenol novolacs （3 and 4） were synthesized in the presence of acid catalyst from carborane bisphenols （5 and 6） and formaldehyde. Further epoxidization of carborane bisphenol novolacs with epichlorohydrin gave carborane bisphenol epoxy novolacs （1 and 2）. The molecular weight and epoxy value of obtained resins were determined using the molecular weight of their precursors. The epoxy values of 1 and 2 were 0.48 and 0.52 respectively, higher than the maximum theoretical epoxy value （0.45） of difunctional carborane bisphenol epoxy resins. FTIR and NMR were utilized to characterize 1 and 2. The curing behaviors were also studied by DSC and the optimized curing conditions were obtained. TGA analysis indicated that carborane moiety could shield its adjacent organic structures against initial decomposition. On the other hand, B--H on carborane cage could react with oxygen to form a three-dimensional network linked by B--O--B and B--C bonds, which further blocked the movement of formed radicals and thus the degradation process was inhibited.
