TiO_2 sols modified by rare earth (RE) ions (Ce^(4+), Eu^(3+), or Nd^(3+))were prepared by coprecipitation-peptization method. The photocatalysis activity was studied byinvestigating the photodegradation effects of ac...TiO_2 sols modified by rare earth (RE) ions (Ce^(4+), Eu^(3+), or Nd^(3+))were prepared by coprecipitation-peptization method. The photocatalysis activity was studied byinvestigating the photodegradation effects of active brilliant red dye X-3B. It is found that TiO_2sols modified by Ce^(4+), Eu^(3+), or Nd^(3+) have the anatase crystalline structure, which areprepared at 70℃. All RE^(n+)-TiO_2 sol samples have uniform nanoparticles with similar morphology,which are homogenously distributed in aqueous colloidal systems. The particle sizes are 10, 8, and12 nm for Nd^(3+)-TiO_2, Eu^(3+)-TiO_2, and Ce^(4+)-TiO_2, respectively. The character of ultrafineand positive charge sol particles contributes to the good adsorption of X-3B dye molecule on thesurface of titania (about 30% X-3B adsorption amount). Experimental results exhibit thatRE^(n+)-TiO_2 sol photocatalysts have the capability to photodegrade X-3B under visible lightirradiation. Nd^(3+)-TiO_2 and Eu^(3+)-TiO_2 show higher photocatalytic activity than Ce^(4+)-TiO_2,which is due to the difference of standard redox potential of RE^(n+)/RE^((n-1)+). RE^(n+)-TiO_2sols demonstrate more excellent interfacial adsorption and photodegradation effects to X-3B thanP_(25) TiO_2 crystallites. Moreover, the degradation mechanism of X-3B is proposed as dyephotosensitization and electron scavenging by rare earth ions.展开更多
Photocatalysis based on semiconductors has recently been receiving considerable research interest because of its extensive applications in environmental remediation and renewable energy generation.Various semiconducto...Photocatalysis based on semiconductors has recently been receiving considerable research interest because of its extensive applications in environmental remediation and renewable energy generation.Various semiconductor-based materials that are vital to solar energy utilization have been extensively investigated,among which titanium oxide(TiO_(2))has attracted considerable attention because of its exceptional physicochemical characteristics.However,the sluggish responsiveness to visible light in the solar spectrum and the inefficient separation of photoinduced electron-hole pairs hamper the practical application of TiO_(2) materials.To overcome the aforementioned serious drawbacks of TiO_(2),numerous strategies,such as doping with foreign atoms,particularly nitrogen(N),have been improved in the past few decades.This review aims to provide a comprehensive update and description of the recent developments of N-doped TiO_(2) materials for visible lightresponsive photocatalysis,such as(1)the preparation of N-doped/co-doped TiO_(2) photocatalysts and(2)mechanistic studies on the reasons for visible light response.Furthermore,the most recent and significant advances in the field of solar energy applications of modified N-doped TiO_(2) are summarized.The analysis indicated the critical need for further development of these types of materials for the solar-to-energy conversion,particularly for water splitting purposes.展开更多
In this study,we successfully synthesized Er_(2)TiO_(5)@Ag nanocomposites(NCPs) using the ultrasonicmediated sol-gel technique to create a multifunctional material with enhanced photocatalytic and antibacterial proper...In this study,we successfully synthesized Er_(2)TiO_(5)@Ag nanocomposites(NCPs) using the ultrasonicmediated sol-gel technique to create a multifunctional material with enhanced photocatalytic and antibacterial properties.The visible light photocatalytic activities of Er_(2)TiO_(5) nanoparticles(NPs) and Er_(2)TiO_(5)@Ag NCPs were systematically evaluated under various conditions,including different concentrations of Basic Blue 41(BB 41) dye and photocatalyst.The results reveal a remarkable improvement in the photocatalytic degradation efficiency of Er_(2)TiO_(5)@Ag NCPs(95%) compared to Er_(2)TiO_(5) NPs(80%).Furthermore,the antibacterial efficacy of Er_(2)TiO_(5) NPs and Er2TiO_5@Ag NCPs were extensively examined against Gram-positive and Gram-negative bacteria.Notably,Er_(2)TiO_(5)@Ag NCPs exhibit significantly higher minimum bactericidal concentration(MBC) values compared to Er_(2)TiO_(5) NPs.The antibacterial effect of Er_(2)TiO_(5)@Ag NCPs is particularly pronounced against S.aureus and Pseudomonas aeruginosa,while demonstrating moderate effects on Escherichia coli and Enterococcus faecalis.To assess the biocompatibility of the synthesized materials,we investigated their internalization by MCF-7 cells.Encouragingly,both Er_(2)TiO_(5) NPs and Er_(2)TiO_(5)@Ag NCPs are found to be effectively internalized by the cells,suggesting their potential application in biomedical fields.Intriguingly,our study unveils the exceptional potential of Er_(2)TiO_(5)@Ag NCPs as a dual-action solution,simultaneously possessing enhanced photocatalytic efficiency and potent antibacterial properties.This multifunctional nanocomposite not only outperforms Er_(2)TiO_(5) and Ag but also paves the way for innovative applications in sustainable environmental remediation and advanced biomedical technologies,promising a brighter and cleaner future.展开更多
Nd^(3+)-doped TiO_2 powders were prepared by the sol-gel method. Their crystal pattern and parameter, the specific surface area, the surface chemical state of Ti and the ratio of O/Ti were characterized. The results s...Nd^(3+)-doped TiO_2 powders were prepared by the sol-gel method. Their crystal pattern and parameter, the specific surface area, the surface chemical state of Ti and the ratio of O/Ti were characterized. The results show that Nd impurity hinders the crystal transformation, and decreases the relative intensity of (101) peak. The crystallite sizes of Nd^(3+)-doped TiO_2 powders decrease while their specific surface area increase owing to the Nd^(3+) doping. The XPS measurement shows that the content of Ti(Ⅲ) and ratio of O/Ti on their surfaces increase significantly with the increase of Nd^(3+) dosage. The adsorption and photodegradation experiments show that the optimum molar content of Nd^(3+) is 1.2%.展开更多
TiO_2 nanoparticles with different phases are prepared by hydrolysis oftitanium tetrabutoxide in the presence of HC1. The composition and microstructure of the resultingsamples are studied by XRD and TEM. These result...TiO_2 nanoparticles with different phases are prepared by hydrolysis oftitanium tetrabutoxide in the presence of HC1. The composition and microstructure of the resultingsamples are studied by XRD and TEM. These results show that the range of particle size of TiO_2 isfrom 20 to 30 nm. The mechanism of TiO_2 photocatalysis reaction has been discussed extensively.Photocatalytic activities of nanometer TiO_2 are also evaluated by degradation of the crystal violetsolution. Experimental results indicate that the synergistic action of H_2O_2 and ultrasonic wavegreatly enhances photo-catalytic reaction of TiO_2.展开更多
A synergistic photocatalysis combined pulsed diaphragm discharge（PDD）system with TiO_2 nanofilm deposited on the surface of quartz diaphragm is developed for the first time for phenol degradation in an aqueous solut...A synergistic photocatalysis combined pulsed diaphragm discharge（PDD）system with TiO_2 nanofilm deposited on the surface of quartz diaphragm is developed for the first time for phenol degradation in an aqueous solution.It is observed that the decomposition efficiency of phenol in the TiO_2 combined PDD system is higher than that of the single PDD system under the same conditions,indicating a successful collaboration between the photocatalysis and the plasma decomposition in the present system.Analysis of the solution＇s pH value confirms this collaboration and further reveals that the photocatalytic enhancement effect of phenol degradation is strong at a relatively low supplied voltage.The present TiO_2 combined PDD system exhibits improved efficiencies of pollutant degradation and energy utilization,suggesting a good candidate for wastewater treatment.展开更多
化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于...化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于光催化降解不同有机污染物显得尤为重要。采用一步无模板溶剂热法合成了核壳结构的C-TiO_(2)复合材料前驱体,并在氩气气氛下煅烧得到高结晶度的C-TiO_(2)复合光催化材料。运用SEM、TEM、XRD和TG等表征手段对材料进行表征,结论如下:550℃煅烧时的样品为包含少量碳的高结晶度的锐钛矿相TiO 2,且550℃煅烧时的样品依然保持了完整的核壳结构。此外,C-TiO_(2)复合材料的比表面积高达85.69 m 2·g^(-1),平均孔径为16.4 nm以及孔体积为0.423 m 3·g^(-1)。在UV-Vis光照射下,C-TiO_(2)复合材料分别对罗丹明B(RhB)、亚甲基蓝(MB)和刚果红(CR)3种染料显示出增强的光催化降解活性。展开更多
The study focused on the modification with platinum of dark defective titania obtained via pulsed laser ablation. Both the method of Pt introduction and the nature of the Pt precursor were varied. All samples exhibite...The study focused on the modification with platinum of dark defective titania obtained via pulsed laser ablation. Both the method of Pt introduction and the nature of the Pt precursor were varied. All samples exhibited similar phase compositions, specific surface areas, and Pt contents. High-resolution transmission electron microscopy coupled with pulsed CO adsorption revealed increased dispersity when photoreduction and the hydroxonitrate complex (Me _(4) N) _(2) [Pt _(2) (OH) _(2) (NO _(3) ) _(8) ] were used. The sample featured a high content of single-atom species and subnano-sized Pt clusters. The X-ray photoelectron spectroscopy results showed that the photoreduction method facilitated the appearance of a larger number of Pt ^(2+) states, which appeared owing to the strong metal-support interaction (SMSI) eff ect of the transfer of electron density from the electron-saturated defects on the TiO _(2) surface to Pt ^(4+) . In the hydrogen evolution reaction, samples with a significant fraction of the Pt ^(2+) ionic component, capable of generating short-lived Pt^(0) single-atom sites under irradiation due to the SMSI eff ect, exhibited the highest photocatalytic activity. The 0.5Pt(C)/TiO_(2) -Ph sample exhibited the highest hydrogen yield with a quantum efficiency of 0.53, retaining its activity even after 8 h of operation.展开更多
基金This work was financially supported by the Hi-Tech Research and Development Program (863 Program) of China (No. 2002AA302304)the National Natural Science Foundation of China (No. 60121101)the Education Department Foundation of Jiangsu Province (JHOl-
文摘TiO_2 sols modified by rare earth (RE) ions (Ce^(4+), Eu^(3+), or Nd^(3+))were prepared by coprecipitation-peptization method. The photocatalysis activity was studied byinvestigating the photodegradation effects of active brilliant red dye X-3B. It is found that TiO_2sols modified by Ce^(4+), Eu^(3+), or Nd^(3+) have the anatase crystalline structure, which areprepared at 70℃. All RE^(n+)-TiO_2 sol samples have uniform nanoparticles with similar morphology,which are homogenously distributed in aqueous colloidal systems. The particle sizes are 10, 8, and12 nm for Nd^(3+)-TiO_2, Eu^(3+)-TiO_2, and Ce^(4+)-TiO_2, respectively. The character of ultrafineand positive charge sol particles contributes to the good adsorption of X-3B dye molecule on thesurface of titania (about 30% X-3B adsorption amount). Experimental results exhibit thatRE^(n+)-TiO_2 sol photocatalysts have the capability to photodegrade X-3B under visible lightirradiation. Nd^(3+)-TiO_2 and Eu^(3+)-TiO_2 show higher photocatalytic activity than Ce^(4+)-TiO_2,which is due to the difference of standard redox potential of RE^(n+)/RE^((n-1)+). RE^(n+)-TiO_2sols demonstrate more excellent interfacial adsorption and photodegradation effects to X-3B thanP_(25) TiO_2 crystallites. Moreover, the degradation mechanism of X-3B is proposed as dyephotosensitization and electron scavenging by rare earth ions.
基金supported by the National Natural Science Foundation of China(Nos.21633009,21925206,21901240)the National Key Research and Development Program of China(No.2020YFA0406102)。
文摘Photocatalysis based on semiconductors has recently been receiving considerable research interest because of its extensive applications in environmental remediation and renewable energy generation.Various semiconductor-based materials that are vital to solar energy utilization have been extensively investigated,among which titanium oxide(TiO_(2))has attracted considerable attention because of its exceptional physicochemical characteristics.However,the sluggish responsiveness to visible light in the solar spectrum and the inefficient separation of photoinduced electron-hole pairs hamper the practical application of TiO_(2) materials.To overcome the aforementioned serious drawbacks of TiO_(2),numerous strategies,such as doping with foreign atoms,particularly nitrogen(N),have been improved in the past few decades.This review aims to provide a comprehensive update and description of the recent developments of N-doped TiO_(2) materials for visible lightresponsive photocatalysis,such as(1)the preparation of N-doped/co-doped TiO_(2) photocatalysts and(2)mechanistic studies on the reasons for visible light response.Furthermore,the most recent and significant advances in the field of solar energy applications of modified N-doped TiO_(2) are summarized.The analysis indicated the critical need for further development of these types of materials for the solar-to-energy conversion,particularly for water splitting purposes.
基金Project supported by the Kashan University of Medical Sciences, Kashan,Iran (99181)Council of University of Medical Science,Kashan for providing financial support to this work。
文摘In this study,we successfully synthesized Er_(2)TiO_(5)@Ag nanocomposites(NCPs) using the ultrasonicmediated sol-gel technique to create a multifunctional material with enhanced photocatalytic and antibacterial properties.The visible light photocatalytic activities of Er_(2)TiO_(5) nanoparticles(NPs) and Er_(2)TiO_(5)@Ag NCPs were systematically evaluated under various conditions,including different concentrations of Basic Blue 41(BB 41) dye and photocatalyst.The results reveal a remarkable improvement in the photocatalytic degradation efficiency of Er_(2)TiO_(5)@Ag NCPs(95%) compared to Er_(2)TiO_(5) NPs(80%).Furthermore,the antibacterial efficacy of Er_(2)TiO_(5) NPs and Er2TiO_5@Ag NCPs were extensively examined against Gram-positive and Gram-negative bacteria.Notably,Er_(2)TiO_(5)@Ag NCPs exhibit significantly higher minimum bactericidal concentration(MBC) values compared to Er_(2)TiO_(5) NPs.The antibacterial effect of Er_(2)TiO_(5)@Ag NCPs is particularly pronounced against S.aureus and Pseudomonas aeruginosa,while demonstrating moderate effects on Escherichia coli and Enterococcus faecalis.To assess the biocompatibility of the synthesized materials,we investigated their internalization by MCF-7 cells.Encouragingly,both Er_(2)TiO_(5) NPs and Er_(2)TiO_(5)@Ag NCPs are found to be effectively internalized by the cells,suggesting their potential application in biomedical fields.Intriguingly,our study unveils the exceptional potential of Er_(2)TiO_(5)@Ag NCPs as a dual-action solution,simultaneously possessing enhanced photocatalytic efficiency and potent antibacterial properties.This multifunctional nanocomposite not only outperforms Er_(2)TiO_(5) and Ag but also paves the way for innovative applications in sustainable environmental remediation and advanced biomedical technologies,promising a brighter and cleaner future.
文摘Nd^(3+)-doped TiO_2 powders were prepared by the sol-gel method. Their crystal pattern and parameter, the specific surface area, the surface chemical state of Ti and the ratio of O/Ti were characterized. The results show that Nd impurity hinders the crystal transformation, and decreases the relative intensity of (101) peak. The crystallite sizes of Nd^(3+)-doped TiO_2 powders decrease while their specific surface area increase owing to the Nd^(3+) doping. The XPS measurement shows that the content of Ti(Ⅲ) and ratio of O/Ti on their surfaces increase significantly with the increase of Nd^(3+) dosage. The adsorption and photodegradation experiments show that the optimum molar content of Nd^(3+) is 1.2%.
文摘TiO_2 nanoparticles with different phases are prepared by hydrolysis oftitanium tetrabutoxide in the presence of HC1. The composition and microstructure of the resultingsamples are studied by XRD and TEM. These results show that the range of particle size of TiO_2 isfrom 20 to 30 nm. The mechanism of TiO_2 photocatalysis reaction has been discussed extensively.Photocatalytic activities of nanometer TiO_2 are also evaluated by degradation of the crystal violetsolution. Experimental results indicate that the synergistic action of H_2O_2 and ultrasonic wavegreatly enhances photo-catalytic reaction of TiO_2.
基金supported by National Natural Science Foundation of China(Nos.11205202,21203204 and 11175214)National Natural Science Foundation of Anhui Province(No.1308085QA09)
文摘A synergistic photocatalysis combined pulsed diaphragm discharge（PDD）system with TiO_2 nanofilm deposited on the surface of quartz diaphragm is developed for the first time for phenol degradation in an aqueous solution.It is observed that the decomposition efficiency of phenol in the TiO_2 combined PDD system is higher than that of the single PDD system under the same conditions,indicating a successful collaboration between the photocatalysis and the plasma decomposition in the present system.Analysis of the solution＇s pH value confirms this collaboration and further reveals that the photocatalytic enhancement effect of phenol degradation is strong at a relatively low supplied voltage.The present TiO_2 combined PDD system exhibits improved efficiencies of pollutant degradation and energy utilization,suggesting a good candidate for wastewater treatment.
文摘化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于光催化降解不同有机污染物显得尤为重要。采用一步无模板溶剂热法合成了核壳结构的C-TiO_(2)复合材料前驱体,并在氩气气氛下煅烧得到高结晶度的C-TiO_(2)复合光催化材料。运用SEM、TEM、XRD和TG等表征手段对材料进行表征,结论如下:550℃煅烧时的样品为包含少量碳的高结晶度的锐钛矿相TiO 2,且550℃煅烧时的样品依然保持了完整的核壳结构。此外,C-TiO_(2)复合材料的比表面积高达85.69 m 2·g^(-1),平均孔径为16.4 nm以及孔体积为0.423 m 3·g^(-1)。在UV-Vis光照射下,C-TiO_(2)复合材料分别对罗丹明B(RhB)、亚甲基蓝(MB)和刚果红(CR)3种染料显示出增强的光催化降解活性。
文摘The study focused on the modification with platinum of dark defective titania obtained via pulsed laser ablation. Both the method of Pt introduction and the nature of the Pt precursor were varied. All samples exhibited similar phase compositions, specific surface areas, and Pt contents. High-resolution transmission electron microscopy coupled with pulsed CO adsorption revealed increased dispersity when photoreduction and the hydroxonitrate complex (Me _(4) N) _(2) [Pt _(2) (OH) _(2) (NO _(3) ) _(8) ] were used. The sample featured a high content of single-atom species and subnano-sized Pt clusters. The X-ray photoelectron spectroscopy results showed that the photoreduction method facilitated the appearance of a larger number of Pt ^(2+) states, which appeared owing to the strong metal-support interaction (SMSI) eff ect of the transfer of electron density from the electron-saturated defects on the TiO _(2) surface to Pt ^(4+) . In the hydrogen evolution reaction, samples with a significant fraction of the Pt ^(2+) ionic component, capable of generating short-lived Pt^(0) single-atom sites under irradiation due to the SMSI eff ect, exhibited the highest photocatalytic activity. The 0.5Pt(C)/TiO_(2) -Ph sample exhibited the highest hydrogen yield with a quantum efficiency of 0.53, retaining its activity even after 8 h of operation.
