In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied compara...In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied comparatively by various experimental techniques. The results showed that the NO conversion of V2O5-WO3/CeO2-TiO2 catalysts modified by co-precipitation method obviously increased with the Ce doping contents in the studied range below 20%(All Ce contents are in mass fractions), but the NO conversion of V2O5-WO3/CeO2/TiO2 catalysts modified by impregnation methods was lower than V2O5-WO3/CeO2-TiO2 catalysts especially beyond 2.5% Ce doping contents. The V2O5-WO3/CeO2-TiO2 catalysts showed better SCR activity, wider reaction window, and higher sulfur and water resistance. The characterization results elucidated that the modified catalysts by co-precipitation method exhibited higher specific surface area, much better dispersity of Ce component, more Ce^(3+)species and more Br?nsted acid sites than that by impregnation. The vacancies caused by more Ce^(3+)species were favorable for more NO oxidation to NO2, and the interaction between Ce species and WOxspecies generated more Br?nsted acid sites. It could be supposed that dispersed Ce Oxspecies and WOxspecies offered more second active centers respectively to adsorb oxygen and activate ammonia as co-catalysis to the primary active center of V ions, thus facilitated the better SCR activity of modified V2O5-WO3/CeO2-TiO2 catalysts by coprecipitation methods. The co-precipitation methods with Ce component were more suitable for production of modified commercial V2O5-WO3/TiO2 catalysts.展开更多
Contaminants(K,Na,Ca,and Mg)were introduced into Cu-SAPO-18 via incipient wetness impregnation to investigate their effect on the selective catalytic reduction of NOx with NH3(NH3-SCR)over Cu-SAPO-18.After the introdu...Contaminants(K,Na,Ca,and Mg)were introduced into Cu-SAPO-18 via incipient wetness impregnation to investigate their effect on the selective catalytic reduction of NOx with NH3(NH3-SCR)over Cu-SAPO-18.After the introduction of contaminants into Cu-SAPO-18,the quantity of acidic sites and Cu^2+ species in catalyst decreases owing to the replacement of H^+ and Cu^2+ by K^+,Na^+,Ca^2+,and Mg^2+.Furthermore,the loss of isolated Cu^2+ induces the generation of CuO and CuAl2O4-like phases,which causes further loss in the Brunauer-Emmett-Teller surface area of the catalyst.Consequently,the deNOx performance of the contaminated Cu-SAPO-18 catalysts drops.Such decline in NH3-SCR performance becomes more pronounced by increasing the contaminant contents from 0.5 to 1.0 mmol/gcatal.In addition,the deactivation influence of the contaminants on Cu-SAPO-18 is presented in the order of K>Na>Ca>Mg,which is consistent with the order of reduction of acidic sites.To a certain degree,the effect of the acidic sites on the deactivation of Cu-SAPO-18 might be more significant than that of isolated Cu2+ and the catalyst framework.Moreover,kinetic analysis of NH3-SCR was conducted,and the results indicate that there is no influence of contaminants on the NH3-SCR mechanism.展开更多
Mn-based catalysts have exhibited promising performance in low-temperature selective catalytic reduction of NOx with NH_(3)(NH_(3)-SCR).However,challenges such as H_(2)O-or SO_(2)-induced poisoning to these catalysts ...Mn-based catalysts have exhibited promising performance in low-temperature selective catalytic reduction of NOx with NH_(3)(NH_(3)-SCR).However,challenges such as H_(2)O-or SO_(2)-induced poisoning to these catalysts still remain.Herein,we report an efficient strategy to prepare the dual single-atom Ce-Ti/MnO_(2)catalyst via ball-milling and calcination processes to address these issues.Ce-Ti/MnO_(2)showed better catalytic performance with a higher NO conversion and enhanced H_(2)O-and SO_(2)-resistance at a lowtemperature window(100−150°C)than the MnO_(2),single-atom Ce/MnO_(2),and Ti/MnO_(2)catalysts.The in situ infrared Fourier transform spectroscopy analysis confirmed there is no competitive adsorption between NOx and H_(2)O over the Ce-Ti/MnO_(2)catalyst.The calculation results showed that the synergistic interaction of the neighboring Ce-Ti dual atoms as sacrificial sites weakens the ability of the active Mn sites for binding SO_(2)and H_(2)O but enhances their binding to NH_(3).The insight obtained in this work deepens the understanding of catalysis for NH_(3)-SCR.The synthesis strategy developed in this work is easily scaled up to commercialization and applicable to preparing other MnO_(2)-based single-atom catalysts.展开更多
基金Project supported by the Guangxi Natural Science Foundation(2014GXNSFAA118057)Guangxi Science and Technology Planning Project(AB16380276)
文摘In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied comparatively by various experimental techniques. The results showed that the NO conversion of V2O5-WO3/CeO2-TiO2 catalysts modified by co-precipitation method obviously increased with the Ce doping contents in the studied range below 20%(All Ce contents are in mass fractions), but the NO conversion of V2O5-WO3/CeO2/TiO2 catalysts modified by impregnation methods was lower than V2O5-WO3/CeO2-TiO2 catalysts especially beyond 2.5% Ce doping contents. The V2O5-WO3/CeO2-TiO2 catalysts showed better SCR activity, wider reaction window, and higher sulfur and water resistance. The characterization results elucidated that the modified catalysts by co-precipitation method exhibited higher specific surface area, much better dispersity of Ce component, more Ce^(3+)species and more Br?nsted acid sites than that by impregnation. The vacancies caused by more Ce^(3+)species were favorable for more NO oxidation to NO2, and the interaction between Ce species and WOxspecies generated more Br?nsted acid sites. It could be supposed that dispersed Ce Oxspecies and WOxspecies offered more second active centers respectively to adsorb oxygen and activate ammonia as co-catalysis to the primary active center of V ions, thus facilitated the better SCR activity of modified V2O5-WO3/CeO2-TiO2 catalysts by coprecipitation methods. The co-precipitation methods with Ce component were more suitable for production of modified commercial V2O5-WO3/TiO2 catalysts.
基金supported by the National Natural Science Foundation of China(21473064)~~
文摘Contaminants(K,Na,Ca,and Mg)were introduced into Cu-SAPO-18 via incipient wetness impregnation to investigate their effect on the selective catalytic reduction of NOx with NH3(NH3-SCR)over Cu-SAPO-18.After the introduction of contaminants into Cu-SAPO-18,the quantity of acidic sites and Cu^2+ species in catalyst decreases owing to the replacement of H^+ and Cu^2+ by K^+,Na^+,Ca^2+,and Mg^2+.Furthermore,the loss of isolated Cu^2+ induces the generation of CuO and CuAl2O4-like phases,which causes further loss in the Brunauer-Emmett-Teller surface area of the catalyst.Consequently,the deNOx performance of the contaminated Cu-SAPO-18 catalysts drops.Such decline in NH3-SCR performance becomes more pronounced by increasing the contaminant contents from 0.5 to 1.0 mmol/gcatal.In addition,the deactivation influence of the contaminants on Cu-SAPO-18 is presented in the order of K>Na>Ca>Mg,which is consistent with the order of reduction of acidic sites.To a certain degree,the effect of the acidic sites on the deactivation of Cu-SAPO-18 might be more significant than that of isolated Cu2+ and the catalyst framework.Moreover,kinetic analysis of NH3-SCR was conducted,and the results indicate that there is no influence of contaminants on the NH3-SCR mechanism.
基金We gratefully acknowledge the financial supports from the National Natural Science Foundation of China(Nos.52070180,51938014,and 21802054)the Science Research Project of the Ministry of Education of the Heilongjiang Province of China(No.145109102)+2 种基金the Beijing Chenxi Environmental Engineering Co.,Ltd.Z.Z.thanks the financial support of Guangdong Key discipline fund for this collaborationY.J.thanks the financial supports from the Outstanding Youth cultivation program of Beijing Technology and Business University(No.19008021144)Research Foundation for Advanced Talents of Beijing Technology and Business University(No.19008020159).
文摘Mn-based catalysts have exhibited promising performance in low-temperature selective catalytic reduction of NOx with NH_(3)(NH_(3)-SCR).However,challenges such as H_(2)O-or SO_(2)-induced poisoning to these catalysts still remain.Herein,we report an efficient strategy to prepare the dual single-atom Ce-Ti/MnO_(2)catalyst via ball-milling and calcination processes to address these issues.Ce-Ti/MnO_(2)showed better catalytic performance with a higher NO conversion and enhanced H_(2)O-and SO_(2)-resistance at a lowtemperature window(100−150°C)than the MnO_(2),single-atom Ce/MnO_(2),and Ti/MnO_(2)catalysts.The in situ infrared Fourier transform spectroscopy analysis confirmed there is no competitive adsorption between NOx and H_(2)O over the Ce-Ti/MnO_(2)catalyst.The calculation results showed that the synergistic interaction of the neighboring Ce-Ti dual atoms as sacrificial sites weakens the ability of the active Mn sites for binding SO_(2)and H_(2)O but enhances their binding to NH_(3).The insight obtained in this work deepens the understanding of catalysis for NH_(3)-SCR.The synthesis strategy developed in this work is easily scaled up to commercialization and applicable to preparing other MnO_(2)-based single-atom catalysts.