The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(...The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(+)-doped g-C_(3)N_(4)(KCN)nanosheets using a solvothermal method,then In_(2.77)S_(4)/KCN(IS/KCN)het-erojunction with an intimate interface was obtained after a calcination process.The investigation shows that the photocatalytic H_(2)O_(2) production rate of 50IS/KCN can reach up to 1.36 mmol g^(-1)h^(-1)without any sacrificial reagents under visible light irradiation,which is 9.2 times and 4.1 times higher than that of KCN and In_(2.77)S_(4)/respectively.The enhanced activity of the above composite can be mainly attributed to the S-scheme charge transfer route between KCN and In_(2.77)S_(4) according to density functional theory calculations,electron paramagnetic resonance and free radical capture tests,leading to an expanded light response range and rapid charge separation at their interface,as well as preserving the active electrons and holes for H_(2)O_(2) production.Besides,the unique 3D nanostructure and surface hydrophobicity of IS/KCN facilitate the diffusion and transportation of O_(2) around the active centers,the energy barriers of O_(2) protonation and H_(2)O_(2) desorption steps are ef-fectively reduced over the composite.In addition,this system also exhibits excellent light harvesting ability and stability.This work provides a potential strategy to explore a sustainable H_(2)O_(2) photo-synthesis pathway through the design of heterojunctions with intimate interfaces and desired reac-tion thermodynamics and kinetics.展开更多
Electrochemical reduction of CO_(2)into high-value hydrocarbons and alcohols by using Cu-based catalysts is a promising and attractive technology for CO_(2)capture and utilization,resulting from their high catalytic a...Electrochemical reduction of CO_(2)into high-value hydrocarbons and alcohols by using Cu-based catalysts is a promising and attractive technology for CO_(2)capture and utilization,resulting from their high catalytic activity and selectivity.The mobility and accessibility of active sites in Cubased catalysts significantly hinder the development of efficient Cu-based catalysts for CO_(2)electrochemical reduction reaction(CO_(2)RR).Herein,a facile and effective strategy is developed to engineer accessible and structural stable Cu sites by incorporating single atomic Cu into the nitrogen cavities of the host graphitic carbon nitride(g-C_(3)N_(4))as the active sites for CO_(2)-to-CH_(4)conversion in CO_(2)RR.By regulating the coordination and density of Cu sites in g-C_(3)N_(4),an optimal catalyst corresponding to a one Cu atom in one nitrogen cavity reaches the highest CH_(4)Faraday efficiency of 49.04%and produces the products with a high CH_(4)/C_(2)H_(4)ratio over 9.This work provides the first experimental study on g-C_(3)N_(4)-supported single Cu atom catalyst for efficient CH_(4)production from CO_(2)RR and suggests a principle in designing highly stable and selective high-efficiency Cu-based catalysts for CO_(2)RR by engineering Cu active sites in 2D materials with porous crystal structures.展开更多
(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算...(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算解析了相关分解机理;以同步热分析-红外-质谱联用技术结合原位红外技术探索了(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]的分解产物及分解历程;以国军标法获得了热感度、摩擦感度与撞击感度参数。结果表明:在10℃·min^(-1)的升温速率下,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]分解放热量为4227 J·g^(-1),分解温度则达到345℃,高于黑索今(RDX)、奥克托今(HMX)、六硝基六氮杂异伍兹烷(CL-20)等多数现役含能材料,显示了优异的热稳定性;分解产物研究表明其立方笼状骨架有效稳定了内部结合的有机物分子,使其热稳定性较高。此外,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]在100℃下加热48 h的放气量约0.04 m L·g^(-1),撞击感度与机械感度分别为32%和80%,优于RDX和HMX。展开更多
文摘The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(+)-doped g-C_(3)N_(4)(KCN)nanosheets using a solvothermal method,then In_(2.77)S_(4)/KCN(IS/KCN)het-erojunction with an intimate interface was obtained after a calcination process.The investigation shows that the photocatalytic H_(2)O_(2) production rate of 50IS/KCN can reach up to 1.36 mmol g^(-1)h^(-1)without any sacrificial reagents under visible light irradiation,which is 9.2 times and 4.1 times higher than that of KCN and In_(2.77)S_(4)/respectively.The enhanced activity of the above composite can be mainly attributed to the S-scheme charge transfer route between KCN and In_(2.77)S_(4) according to density functional theory calculations,electron paramagnetic resonance and free radical capture tests,leading to an expanded light response range and rapid charge separation at their interface,as well as preserving the active electrons and holes for H_(2)O_(2) production.Besides,the unique 3D nanostructure and surface hydrophobicity of IS/KCN facilitate the diffusion and transportation of O_(2) around the active centers,the energy barriers of O_(2) protonation and H_(2)O_(2) desorption steps are ef-fectively reduced over the composite.In addition,this system also exhibits excellent light harvesting ability and stability.This work provides a potential strategy to explore a sustainable H_(2)O_(2) photo-synthesis pathway through the design of heterojunctions with intimate interfaces and desired reac-tion thermodynamics and kinetics.
基金This work was supported by the Fundamental Research Funds for the Central Universities(2232021A-02 and 2232023Y-01)the National Natural Science Foundation of China(Nos.52122312,22209024 and 22202183).
文摘Electrochemical reduction of CO_(2)into high-value hydrocarbons and alcohols by using Cu-based catalysts is a promising and attractive technology for CO_(2)capture and utilization,resulting from their high catalytic activity and selectivity.The mobility and accessibility of active sites in Cubased catalysts significantly hinder the development of efficient Cu-based catalysts for CO_(2)electrochemical reduction reaction(CO_(2)RR).Herein,a facile and effective strategy is developed to engineer accessible and structural stable Cu sites by incorporating single atomic Cu into the nitrogen cavities of the host graphitic carbon nitride(g-C_(3)N_(4))as the active sites for CO_(2)-to-CH_(4)conversion in CO_(2)RR.By regulating the coordination and density of Cu sites in g-C_(3)N_(4),an optimal catalyst corresponding to a one Cu atom in one nitrogen cavity reaches the highest CH_(4)Faraday efficiency of 49.04%and produces the products with a high CH_(4)/C_(2)H_(4)ratio over 9.This work provides the first experimental study on g-C_(3)N_(4)-supported single Cu atom catalyst for efficient CH_(4)production from CO_(2)RR and suggests a principle in designing highly stable and selective high-efficiency Cu-based catalysts for CO_(2)RR by engineering Cu active sites in 2D materials with porous crystal structures.
文摘(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算解析了相关分解机理;以同步热分析-红外-质谱联用技术结合原位红外技术探索了(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]的分解产物及分解历程;以国军标法获得了热感度、摩擦感度与撞击感度参数。结果表明:在10℃·min^(-1)的升温速率下,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]分解放热量为4227 J·g^(-1),分解温度则达到345℃,高于黑索今(RDX)、奥克托今(HMX)、六硝基六氮杂异伍兹烷(CL-20)等多数现役含能材料,显示了优异的热稳定性;分解产物研究表明其立方笼状骨架有效稳定了内部结合的有机物分子,使其热稳定性较高。此外,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]在100℃下加热48 h的放气量约0.04 m L·g^(-1),撞击感度与机械感度分别为32%和80%,优于RDX和HMX。
