Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidat...Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidative coupling of methane （OCM） to higher hydrocarbons at different reaction conditions （viz. temperature, 700 and 750 ℃; CH4/O2 ratio, 4.0 and 8.0 and space velocity, 5140-20550 cm^3 ·g^-1·h^-1） have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties （viz. surface area, basicity/base strength distribution） and catalytic activity/selectivity of the alkali metal doped CaO catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity （strong basic sites） and the C2＋ selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. No direct relationship between surface basicity and catalytic activity/selectivity has been observed. Among the alkali metal doped CaO catalysts, Na-CaO （Na/Ca = 0.1, before calcination） catalyst （calcined at 750 ℃）, showed best performance （C2＋ selectivity of 68.8% with 24.7% methane conversion）, whereas the poorest performance was shown by the Rb-CaO catalyst in the OCM process.展开更多
The oxidative coupling of methane to C2 hydrocarbons has been studied over a series of La-promoted CaO （La/Ca = 0.05） catalysts, prepared using different precursor salts for CaO and La2O3 （viz. acetates, carbonates...The oxidative coupling of methane to C2 hydrocarbons has been studied over a series of La-promoted CaO （La/Ca = 0.05） catalysts, prepared using different precursor salts for CaO and La2O3 （viz. acetates, carbonates, nitrates and hydroxides） and catalyst preparation methods （viz. physical mixing of precursors, co-precipitation using ammonium carbonate/sodium carbonate as a precipitating agent）, under different reaction conditions （temperature： 700-850 ℃, CH4/O2 ratio： 4.0 and 8.0, and GHSV： 51360 cm^3·g^-1·h^- 1）. The surface area and surface basicity/base strength distribution of the catalysts have also been investigated. The surface properties and catalytic activity/selectivity of the La-promoted CaO catalysts vary from catalyst to catalyst depending on the catalyst precursors used and catalyst preparation method. The basicity/base strength distribution is strongly influenced by the precursors （for CaO and La2O3） and catalyst preparation method. Basicity （total and strong basic sites measured in terms of CO2 chemisorbed at 50℃ and 500 ℃, respectively） observed for the catalyst prepared by co-precipitation method is higher than that of the catalysts prepared by physical mixing method. The catalysts prepared by the nitrates of La- and Ca- and co- precipitated by the solution of sodium carbonate and ammonium carbonate exhibit different catalytic performance in OCM. The finding that no direct relationship between the surface basicity and catalytic activity/selectivity in OCM exists indicates that basicity is not solely responsible for obtaining high selectivity to C2 hydrocarbons.展开更多
In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation meth...In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation method and characterized by XRD,Raman and XPS techniques. Appropriate amount of CO2 in the reactant gases enhanced the formation of surface tetrahedral Na2WO4 species and promoted the migration of O in MOx,Na,W from the catalyst bulk to surface,which were favorable for oxidative coupling of methane. When the molar ratio of CH4/O2/CO2 was 3/1/2,enriched surface tetrahedral Na2WO4 species and high surface concentration of O in MOx,Na,W were detected,and then high CH4 conversion of 33.1% and high C2H4 selectivity of 56.2% were obtained. With further increase of CO2 in the reagent gases,the content of active surface tetrahedral Na2WO4 species and surface concentration of O in MOx,Na,W decreased,while that of inactive species（Mn WO4 and Mn2O3） increased dramatically,leading to low CH4 conversion and low C2H4 selectivity. It could be speculated that Na2WO4 crystal was transformed into Mn WO4 crystal with excessive CO2 added under the reaction conditions. Pretreatment of Na2WO4/Mn/Si O2 catalyst by moderate amount of CO2 before OCM also promoted the formation of Na2WO4 species.展开更多
The industrialization of oxidative coupling of methane(OCM)is restricted by the low once through yield of C_(2)hydrocarbons.Recently,the halogen-assisted OCM process has been attempted to overcome this issue,but the r...The industrialization of oxidative coupling of methane(OCM)is restricted by the low once through yield of C_(2)hydrocarbons.Recently,the halogen-assisted OCM process has been attempted to overcome this issue,but the reaction stability was poor due to the rapid loss of gas-phase halides or molten alkali halides.In this work,the barium salts,particularly barium halides(BaCl_(2)and BaF_(2)),were demonstrated to be efficient promoters to improve the OCM reactivity of La_(2)O_(3)/CaO catalyst by increasing both C_(2)selectivity and C_(2)H_(4)/C_(2)H_(6)ratio,and simultaneously achieving outstanding reaction stability.The promoting mechanism can be understood in two aspects.On the one hand,the introduction of barium salts increased the amount of surface electrophilic oxygen species,serving as the alkaline active sites for selective methane activation.On the other hand,the barium halide additives induced the in-situ formation of methyl halide intermediates facilitating C_(2)H_(6)dehydrogenation,and their intimate contact with catalyst substrate restricted the rapid halogen loss and thereby improved the catalytic stability.This work not only provides a class of efficient OCM catalyst,but also offers a highly stable halogen-assisted reaction strategy.展开更多
The effects of operating parameters on oxidative coupling of methane （OCM） over Na-W-Mn/SiO2 catalyst have been studied at elevated pressures of 0.2, 0.3 and 0.4 MPa under low gaseous hourly space velocity （GHSV） ...The effects of operating parameters on oxidative coupling of methane （OCM） over Na-W-Mn/SiO2 catalyst have been studied at elevated pressures of 0.2, 0.3 and 0.4 MPa under low gaseous hourly space velocity （GHSV） and low temperature conditions. Experimental results show that when the operating pressure is increased, C2＋ yield slightly decreases, while the maximum ratio of ethylene to ethane remains unchanged. Moreover, it has been found empirically that increase of pressure does not affect the catalyst behavior permanently, the catalyst recovers its original low pressure performance without hysteresis behavior by reducing the pressure. Under the investigated conditions, when oxygen is completely consumed, the increase of GHSV leads to improvement in C2 selectivity, while C3＋ and COx selectivities decrease slightly. The C2＋ selectivity increases by increase of nitrogen diluent in the feed, but the C3＋ hydrocarbons selectivities decrease with increase of nitrogen since it is possible that further dilution at high pressure may reduce the probability of collision between CH3 and C2＋ hydrocarbons. During the stability test at high pressure, the catalyst performance remains unchanged throughout the 20 h running. The fresh and used catalysts were characterized using XRD, SEM and N2 adsorption-desorption methods. It was found that the phase transformation of the support from α-cristobalite to tridymite and quartz does not have obvious effect on catalyst performance at high pressure.展开更多
CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of Ce...CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of CeO_2–CaO–Pd/HZSM-5 was investigated to ensure that the kinetics experimental results were not significantly influenced by induction period and catalytic deactivation. A large number of kinetic data points(40 sets) were obtained over a range of temperature(240–300 °C), pressure(3–4 MPa), gas hourly space velocity(GHSV)(2000–3000 L·kg^(-1)·h^(-1)) and H_2/CO mole ratio(2–3). Kinetic model for the methanol synthesis reaction and the dehydration of methanol were obtained separately according to reaction mechanism and Langmuir–Hinshelwood mechanism. Regression parameters were investigated by the method combining the simplex method and Runge–Kutta method. The model calculations were in appropriate accordance with the experimental data.展开更多
文摘Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidative coupling of methane （OCM） to higher hydrocarbons at different reaction conditions （viz. temperature, 700 and 750 ℃; CH4/O2 ratio, 4.0 and 8.0 and space velocity, 5140-20550 cm^3 ·g^-1·h^-1） have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties （viz. surface area, basicity/base strength distribution） and catalytic activity/selectivity of the alkali metal doped CaO catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity （strong basic sites） and the C2＋ selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. No direct relationship between surface basicity and catalytic activity/selectivity has been observed. Among the alkali metal doped CaO catalysts, Na-CaO （Na/Ca = 0.1, before calcination） catalyst （calcined at 750 ℃）, showed best performance （C2＋ selectivity of 68.8% with 24.7% methane conversion）, whereas the poorest performance was shown by the Rb-CaO catalyst in the OCM process.
文摘The oxidative coupling of methane to C2 hydrocarbons has been studied over a series of La-promoted CaO （La/Ca = 0.05） catalysts, prepared using different precursor salts for CaO and La2O3 （viz. acetates, carbonates, nitrates and hydroxides） and catalyst preparation methods （viz. physical mixing of precursors, co-precipitation using ammonium carbonate/sodium carbonate as a precipitating agent）, under different reaction conditions （temperature： 700-850 ℃, CH4/O2 ratio： 4.0 and 8.0, and GHSV： 51360 cm^3·g^-1·h^- 1）. The surface area and surface basicity/base strength distribution of the catalysts have also been investigated. The surface properties and catalytic activity/selectivity of the La-promoted CaO catalysts vary from catalyst to catalyst depending on the catalyst precursors used and catalyst preparation method. The basicity/base strength distribution is strongly influenced by the precursors （for CaO and La2O3） and catalyst preparation method. Basicity （total and strong basic sites measured in terms of CO2 chemisorbed at 50℃ and 500 ℃, respectively） observed for the catalyst prepared by co-precipitation method is higher than that of the catalysts prepared by physical mixing method. The catalysts prepared by the nitrates of La- and Ca- and co- precipitated by the solution of sodium carbonate and ammonium carbonate exhibit different catalytic performance in OCM. The finding that no direct relationship between the surface basicity and catalytic activity/selectivity in OCM exists indicates that basicity is not solely responsible for obtaining high selectivity to C2 hydrocarbons.
基金support from the Ministry of Science and Technology (Nos.2012BAC20B10)the National Natural Science Foundation of China (Nos. 21321061 and 20976109)
文摘In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation method and characterized by XRD,Raman and XPS techniques. Appropriate amount of CO2 in the reactant gases enhanced the formation of surface tetrahedral Na2WO4 species and promoted the migration of O in MOx,Na,W from the catalyst bulk to surface,which were favorable for oxidative coupling of methane. When the molar ratio of CH4/O2/CO2 was 3/1/2,enriched surface tetrahedral Na2WO4 species and high surface concentration of O in MOx,Na,W were detected,and then high CH4 conversion of 33.1% and high C2H4 selectivity of 56.2% were obtained. With further increase of CO2 in the reagent gases,the content of active surface tetrahedral Na2WO4 species and surface concentration of O in MOx,Na,W decreased,while that of inactive species（Mn WO4 and Mn2O3） increased dramatically,leading to low CH4 conversion and low C2H4 selectivity. It could be speculated that Na2WO4 crystal was transformed into Mn WO4 crystal with excessive CO2 added under the reaction conditions. Pretreatment of Na2WO4/Mn/Si O2 catalyst by moderate amount of CO2 before OCM also promoted the formation of Na2WO4 species.
基金financially supported by the National Natural Science Foundation of China(22178390,21961132026)the Key Research and Development Plan of Shandong Province(2018GGX107011)the Natural Science Foundation of Shandong Province(ZR2017BB020)。
文摘The industrialization of oxidative coupling of methane(OCM)is restricted by the low once through yield of C_(2)hydrocarbons.Recently,the halogen-assisted OCM process has been attempted to overcome this issue,but the reaction stability was poor due to the rapid loss of gas-phase halides or molten alkali halides.In this work,the barium salts,particularly barium halides(BaCl_(2)and BaF_(2)),were demonstrated to be efficient promoters to improve the OCM reactivity of La_(2)O_(3)/CaO catalyst by increasing both C_(2)selectivity and C_(2)H_(4)/C_(2)H_(6)ratio,and simultaneously achieving outstanding reaction stability.The promoting mechanism can be understood in two aspects.On the one hand,the introduction of barium salts increased the amount of surface electrophilic oxygen species,serving as the alkaline active sites for selective methane activation.On the other hand,the barium halide additives induced the in-situ formation of methyl halide intermediates facilitating C_(2)H_(6)dehydrogenation,and their intimate contact with catalyst substrate restricted the rapid halogen loss and thereby improved the catalytic stability.This work not only provides a class of efficient OCM catalyst,but also offers a highly stable halogen-assisted reaction strategy.
文摘The effects of operating parameters on oxidative coupling of methane （OCM） over Na-W-Mn/SiO2 catalyst have been studied at elevated pressures of 0.2, 0.3 and 0.4 MPa under low gaseous hourly space velocity （GHSV） and low temperature conditions. Experimental results show that when the operating pressure is increased, C2＋ yield slightly decreases, while the maximum ratio of ethylene to ethane remains unchanged. Moreover, it has been found empirically that increase of pressure does not affect the catalyst behavior permanently, the catalyst recovers its original low pressure performance without hysteresis behavior by reducing the pressure. Under the investigated conditions, when oxygen is completely consumed, the increase of GHSV leads to improvement in C2 selectivity, while C3＋ and COx selectivities decrease slightly. The C2＋ selectivity increases by increase of nitrogen diluent in the feed, but the C3＋ hydrocarbons selectivities decrease with increase of nitrogen since it is possible that further dilution at high pressure may reduce the probability of collision between CH3 and C2＋ hydrocarbons. During the stability test at high pressure, the catalyst performance remains unchanged throughout the 20 h running. The fresh and used catalysts were characterized using XRD, SEM and N2 adsorption-desorption methods. It was found that the phase transformation of the support from α-cristobalite to tridymite and quartz does not have obvious effect on catalyst performance at high pressure.
基金Supported by the National Natural Science Foundation of China(51204179,51204182,51674256)The Natural Science Foundation of Jiangsu Province,China(BK20141242)
文摘CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of CeO_2–CaO–Pd/HZSM-5 was investigated to ensure that the kinetics experimental results were not significantly influenced by induction period and catalytic deactivation. A large number of kinetic data points(40 sets) were obtained over a range of temperature(240–300 °C), pressure(3–4 MPa), gas hourly space velocity(GHSV)(2000–3000 L·kg^(-1)·h^(-1)) and H_2/CO mole ratio(2–3). Kinetic model for the methanol synthesis reaction and the dehydration of methanol were obtained separately according to reaction mechanism and Langmuir–Hinshelwood mechanism. Regression parameters were investigated by the method combining the simplex method and Runge–Kutta method. The model calculations were in appropriate accordance with the experimental data.
