Na-beta alumina batteries are one of the most promising technologies for renewable energy storage and grid applications. Na-beta alumina batteries can be constructed in either tubular or planar designs, depending on t...Na-beta alumina batteries are one of the most promising technologies for renewable energy storage and grid applications. Na-beta alumina batteries can be constructed in either tubular or planar designs, depending on the shape of the beta-alumina solid electrolyte. The tubular designs have been widely studied and developed since the 1960 s primarily because of their ease of sealing. However, planar designs are considered superior to tubular designs in terms of power output, cell packing, ease of assembly, thermal management, and other characteristics. Recently, Pacific Northwest National Laboratory has begun to develop high-performance planar Na-beta alumina batteries. In this paper, we provide an overview on the basic battery electrochemistry, solid electrolyte synthesis and fabrication, and our recent progress in developing planar batteries. Future trends for further technology improvement will also be presented.展开更多
Li（Mn1/3Ni1/3Co1/3）O2 cathode materials were fabricated by a hydroxide precursor method. A1203 was coated on the surface of the Li（Mn1/3Ni1/3Co1/3）O2 through a simple and effective one-step electrostatic self-asse...Li（Mn1/3Ni1/3Co1/3）O2 cathode materials were fabricated by a hydroxide precursor method. A1203 was coated on the surface of the Li（Mn1/3Ni1/3Co1/3）O2 through a simple and effective one-step electrostatic self-assembly method. In the coating process, a NaHCO3- H2CO3 buffer was formed spontaneously when CO2 was introduced into the NaAlO2 solution. Compared with bare Li（Mn1/3Ni1/3Co1/3）O2, the surface-modified samples exhibited better cycling performance, rate capability and rate capability retention. The Al2O3-coated Li（Mn1/3Ni1/3Co1/3）O2 electrodes delivered a discharge capacity of about 115 mAh.g-1 at 2 A.g-1, but only 84 mAh.g-1 for the bare one. The capacity retention of the Al2O3-coated Li（Mn1/3Ni1/3Co1/3）O2 was 90.7% after 50 cycles, about 30% higher than that of the pristine one.展开更多
Separators play a critical role in the safety and performance of lithium-ion batteries.However,commercial polyolefin separators are limited by their poor affinity with electrolytes and low melting points.In this work,...Separators play a critical role in the safety and performance of lithium-ion batteries.However,commercial polyolefin separators are limited by their poor affinity with electrolytes and low melting points.In this work,we constructed a reinforced-concrete-like structure by homogeneously dispersing nano-Al_(2)O_(3)and cellulose on the separators to improve their stability and performance.In this reinforcedconcrete-like structure,the cellulose is a reinforcing mesh,and the nano-Al_(2)O_(3)acts as concrete to support the separator.After constructing the reinforced-concrete-like structure,the separators exhibit good stability even at 200C(thermal shrinkage of 0.3%),enhanced tensile strain(tensile stress of 133.4 MPa and tensile strains of 62%),and better electrolyte wettability(a contact angle of 6.5°).Combining these advantages,the cells with nano-Al_(2)O_(3)@cellulose-coated separators exhibit stable cycling performance and good rate performance.Therefore,the construction of the reinforced-concretelike structure is a promising technology to promote the application of lithium-ion batteries in extreme environments.展开更多
Aqueous zinc-ion batteries (ZIBs) have great prospects for widespread application in massive scale energy storage. By virtue of the multivalent state, open frame structure and high theoretical specific capacity, vanad...Aqueous zinc-ion batteries (ZIBs) have great prospects for widespread application in massive scale energy storage. By virtue of the multivalent state, open frame structure and high theoretical specific capacity, vanadium (V)-based compounds are a kind of the most developmental potential cathode materials for ZIBs. However, the slow kinetics caused by low conductivity and the capacity degradation caused by material dissolution still need to be addressed for large-scale applications. Therefore, sodium vanadate Na_(2)V_(6)O_(16)·3H_(2)O (NVO) was chosen as a model material, and was modified with alumina coating through simple mixing and stirring methods. After Al_(2)O_(3) coating modification, the rate capability and long-cycle stability of Zn//NVO@Al_(2)O_(3) battery have been significantly improved. The discharge specific capacity of NVO@Al_(2)O_(3) reach up to 228 mAh/g (at 4 A/g), with a capacity reservation rate of approximately 68% after 1000 cycles, and the Coulombic efficiency (CE) is close to 100%. As a comparison, the capacity reservation rate of Zn//NVO battery is only 27.7%. Its superior electrochemical performance is mainly attributed to the Al2O3 coating layer, which can increase zinc-ion conductivity of the material surface, and to some extent inhibit the dissolution of NVO, making the structure stable and improving the cyclic stability of the material. This paper offers new prospects for the development of cathode coating materials for ZIBs.展开更多
以99.99%高纯铝板为阳极原料,采用电化学方法制备氧化铝前体氢氧化铝,讨论分析了氢氧化铝的焙烧温度、保温时间对制备高纯超细氧化铝的影响,考察了不同电流密度放电对氧化铝形貌和粒度的影响。结果表明:在70 m A·cm^(-2)的较高电...以99.99%高纯铝板为阳极原料,采用电化学方法制备氧化铝前体氢氧化铝,讨论分析了氢氧化铝的焙烧温度、保温时间对制备高纯超细氧化铝的影响,考察了不同电流密度放电对氧化铝形貌和粒度的影响。结果表明:在70 m A·cm^(-2)的较高电流密度下铝/空气电池放电过程可得到平均粒度为268 nm的氢氧化铝;制备的氢氧化铝经洗涤,在1400℃焙烧,保温3 h,可得到平均粒度为200 nm,形貌为近似球状的99.99%的超细氧化铝粉体;而低电流密度所得氧化铝颗粒团聚严重。主要原因是高电流密度使放电过程中产生的氢氧化铝晶体的介稳区宽度变窄所致。展开更多
基金supported by the US Department of Energy’s(DOE’s)Advanced Research Projects Agency-Energy(ARPA-E)Office of Electricity Delivery&Energy Reliability(OE)
文摘Na-beta alumina batteries are one of the most promising technologies for renewable energy storage and grid applications. Na-beta alumina batteries can be constructed in either tubular or planar designs, depending on the shape of the beta-alumina solid electrolyte. The tubular designs have been widely studied and developed since the 1960 s primarily because of their ease of sealing. However, planar designs are considered superior to tubular designs in terms of power output, cell packing, ease of assembly, thermal management, and other characteristics. Recently, Pacific Northwest National Laboratory has begun to develop high-performance planar Na-beta alumina batteries. In this paper, we provide an overview on the basic battery electrochemistry, solid electrolyte synthesis and fabrication, and our recent progress in developing planar batteries. Future trends for further technology improvement will also be presented.
基金supported by the National Natural Science Foundation of China(21273222)
文摘Li（Mn1/3Ni1/3Co1/3）O2 cathode materials were fabricated by a hydroxide precursor method. A1203 was coated on the surface of the Li（Mn1/3Ni1/3Co1/3）O2 through a simple and effective one-step electrostatic self-assembly method. In the coating process, a NaHCO3- H2CO3 buffer was formed spontaneously when CO2 was introduced into the NaAlO2 solution. Compared with bare Li（Mn1/3Ni1/3Co1/3）O2, the surface-modified samples exhibited better cycling performance, rate capability and rate capability retention. The Al2O3-coated Li（Mn1/3Ni1/3Co1/3）O2 electrodes delivered a discharge capacity of about 115 mAh.g-1 at 2 A.g-1, but only 84 mAh.g-1 for the bare one. The capacity retention of the Al2O3-coated Li（Mn1/3Ni1/3Co1/3）O2 was 90.7% after 50 cycles, about 30% higher than that of the pristine one.
基金funding from the Natural Science Foundation of China(22278150,22075086,22138005,and 22141001)the Guangdong Basic and Applied Basic Research Foundation(2022A1515010980,2023A1515010046)the Fundamental Research Funds for the Central Universities(2022ZYGXZR101).
文摘Separators play a critical role in the safety and performance of lithium-ion batteries.However,commercial polyolefin separators are limited by their poor affinity with electrolytes and low melting points.In this work,we constructed a reinforced-concrete-like structure by homogeneously dispersing nano-Al_(2)O_(3)and cellulose on the separators to improve their stability and performance.In this reinforcedconcrete-like structure,the cellulose is a reinforcing mesh,and the nano-Al_(2)O_(3)acts as concrete to support the separator.After constructing the reinforced-concrete-like structure,the separators exhibit good stability even at 200C(thermal shrinkage of 0.3%),enhanced tensile strain(tensile stress of 133.4 MPa and tensile strains of 62%),and better electrolyte wettability(a contact angle of 6.5°).Combining these advantages,the cells with nano-Al_(2)O_(3)@cellulose-coated separators exhibit stable cycling performance and good rate performance.Therefore,the construction of the reinforced-concretelike structure is a promising technology to promote the application of lithium-ion batteries in extreme environments.
基金the National Natural Science Foundation of China(Grant Nos.52122209,52111530050,51772147,and 12174270)the Cultivation Program for“Excellent Doctoral Dissertation”of Nanjing Tech University.
文摘Aqueous zinc-ion batteries (ZIBs) have great prospects for widespread application in massive scale energy storage. By virtue of the multivalent state, open frame structure and high theoretical specific capacity, vanadium (V)-based compounds are a kind of the most developmental potential cathode materials for ZIBs. However, the slow kinetics caused by low conductivity and the capacity degradation caused by material dissolution still need to be addressed for large-scale applications. Therefore, sodium vanadate Na_(2)V_(6)O_(16)·3H_(2)O (NVO) was chosen as a model material, and was modified with alumina coating through simple mixing and stirring methods. After Al_(2)O_(3) coating modification, the rate capability and long-cycle stability of Zn//NVO@Al_(2)O_(3) battery have been significantly improved. The discharge specific capacity of NVO@Al_(2)O_(3) reach up to 228 mAh/g (at 4 A/g), with a capacity reservation rate of approximately 68% after 1000 cycles, and the Coulombic efficiency (CE) is close to 100%. As a comparison, the capacity reservation rate of Zn//NVO battery is only 27.7%. Its superior electrochemical performance is mainly attributed to the Al2O3 coating layer, which can increase zinc-ion conductivity of the material surface, and to some extent inhibit the dissolution of NVO, making the structure stable and improving the cyclic stability of the material. This paper offers new prospects for the development of cathode coating materials for ZIBs.
