期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Study on the dielectric properties of Mg-doped NaBiTi6O14 ceramics
1
作者 陈勇 薛思敏 +6 位作者 骆迁 苏虎音 陈琪 黄镇 徐玲芳 曹万强 黄兆祥 《Chinese Physics B》 SCIE EI CAS CSCD 2017年第4期462-467,共6页
With the interest in using lead-free materials to replace lead-containing materials increasing,the use of Na_(0.5)Bi_(0.5)TiO_3(NBT) has come into our sight.We studied the composition of NBT and found that NaBiT... With the interest in using lead-free materials to replace lead-containing materials increasing,the use of Na_(0.5)Bi_(0.5)TiO_3(NBT) has come into our sight.We studied the composition of NBT and found that NaBiTi_6O_(14) ceramics can be compositionally tuned by Mg-doping on the Ti-site to optimize the dielectric properties.In this study,Mg-doped NaBiTi_6O_(14)(NaBi(Ti_(0.98)Mg_(0.02))_60_(14-d)) ceramics were prepared by a conventional mixed oxide route at different sintering temperatures,and their dielectric properties have been studied at a wide temperature range.X-ray diffraction(XRD) patterns of the NBT-based ceramics indicate that all samples have a pure phase without any secondary impurity phase.The experimental data show that after Mg-doping,the relative permittivity and dielectric loss become lower at 1040,1060,and1080 ℃ except 1020 ℃ and at different frequencies from 10 kHz,100 kHz to 1 MHz.Take 1060 ℃ for example,when the sintering temperature is 1060 ℃ at 1 MHz,the minimum relative permittivity of NaBiTi_6O_(14) is 32.9 and the minimum dielectric loss is 0.01417,the relative permittivity of NaBi(Ti_(0.98)Mg_(0.02))_60_(14-δ) under the same condition is 25.8 and the dielectric loss is 0.000104.We explored the mechanism of Mg-doping and surprisingly found that the dielectric property of NaBi(Ti_(0.98)Mg_(0.02))_60_(14-δ) becomes better owing to Mg-doping.Thus,NaBi(Ti_(0.98)Mg_(0.02))_60_(14-δ) can be used in microwave ceramics and applied to new energy materials. 展开更多
关键词 nabiti6o14 PERMITTIVITY loss(tanδ) dielectric ceramics
下载PDF
NaBiTi6O(14)电子陶瓷的制备与阻抗分析 被引量:1
2
作者 陈勇 张灿灿 +4 位作者 黄镇 卞梦云 陈琪 徐玲芳 曹万强 《湖北大学学报(自然科学版)》 CAS 2017年第1期36-40,共5页
采用传统的固相反应法制备陶瓷样品,XRD衍射分析测得样品的相组成,通过阻抗谱测试样品的阻抗Z*,利用阻抗谱LCR方法测试得出材料的介电常数εr、介电损耗tanδ与温度和频率的关系;通过计算得出NaBiTi_6O_(14)的活化能值.结果表明在950℃... 采用传统的固相反应法制备陶瓷样品,XRD衍射分析测得样品的相组成,通过阻抗谱测试样品的阻抗Z*,利用阻抗谱LCR方法测试得出材料的介电常数εr、介电损耗tanδ与温度和频率的关系;通过计算得出NaBiTi_6O_(14)的活化能值.结果表明在950℃预烧、1100℃与1150℃烧结下,介电损耗tanδ为10-2数量级;阻抗谱测试显示的两组样品的Z*图,实部的最大值都大于104Ω,由Z*图计算所得的活化能均大于1eV.结果显示,NaBiTi_6O_(14)是一种适合于高温高频的介质材料. 展开更多
关键词 NBT nabiti6o14 介电常数 介电损耗 活化能
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部