Synthesis of porous nano/micro structured LiFePO_4/C cathode materials for lithium-ion batteries by spray-drying method

In order to enhance electrochemical properties of LiFePO4 （LFP） cathode materials, spherical porous nano/micro structured LFP/C cathode materials were synthesized by spray drying, followed by calcination. The results show that the spherical precursors with the sizes of 0.5-5 μm can be completely converted to LFP/C when the calcination temperature is higher than 500 ℃. The LFP/C microspheres obtained at calcination temperature of 700 ℃ are composed of numerous particles with sizes of -20 nm, and have well-developed interconnected pore structure and large specific surface area of 28.77 mE/g. The specific discharge capacities of the LFP/C obtained at 700 ℃ are 162.43, 154.35 and 144.03 mA.h/g at 0.5C, 1C and 2C, respectively. Meanwhile, the capacity retentions can reach up to 100% after 50 cycles. The improved electrochemical properties of the materials are ascribed to a small Li＋ diffusion resistance and special structure of LFP/C microspheres.

Research Progress and Prospects of Magnetic Nanomaterials

Nanomaterials are one of the research and development hotspots in the field of cutting-edge new materials,and also an important strategic emerging industry.Magnetic nanomaterials have broad application prospects in fields such as chemical engineering,new materials,electronic information,and biomedicine.This article introduces the application progress and preparation methods of magnetic nanomaterials,and puts forward suggestions for further optimizing the preparation process of magnetic nanomaterials and developing new magnetic materials with better performance.

Preparation of Nano-porous Materials(Ⅰ) by Polymerization of Amphiphile Self-assemblies

The polymerization of amphiphilic self assemblies is a promising method to synthesize nano structured materials with novel properties. These materials have many attractive features for their application in biomedical area and materials science, such as catalysis, separation, surface modification, and therapeutics areas. A general review on the polymerization of lipids and surfactant self assemblies to amphiphilic self assemblies is given in this paper with 49 references. The polymerization and the subsequently resulted structure of lipids in different morphologies are summarized. The polymerization of polymerizable surfactants(surfmers) in emulsion and liquid crystalline phases are also discussed. The potential application of new nano porous materials is briefly described.

Construction and Properties of Structure-and Size-controlled Micro/Nano-energetic Materials

The recent research progress of structure- and size-controlled micro/nano-energetic materials is reviewed, which properties are fundamentally different from those of their corresponding bulk materials. The development of the construction strategies for achieving zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) micro/nanostructures from energetic molecules is introduced. Also, an overview of the unique properties induced by micro/nanostructures and size effects is provided. Special emphasis is focused on the size-dependent properties that are different from those of the conventional micro-sized energetic materials, such as thermal decomposition, sensitivity, combustion and detonation, and compaction behaviors. A conclusion and our view of the future development of micro/nano-energetic materials and devices are given.

Synthesis and Characterization of Storage Energy Materials Prepared from Nano-crystalline Cellulose/Polyethylene Glycol

This paper gives a brief report of the synthesis of a new kind of solid-solid phase change materials （SSPCMs）, nano-crystalline cellulose/polyethylene glycol （NCC/PEG）. These PCMs have very high ability for energy storage, and their enthalpies reach 103.8 J/g. They are composed of two parts, PEG as functional branches for energy storage, and NCC as skeleton. The flexible polymer PEG was grafted onto the surface of rigid powder of NCC by covalent bonds. The results of DSC, FT-IR were briefly introduced, and some comments were also given.

New Nano Polymer Materials for Composite Exterior-Wall Coatings

A triethylenetetramine epoxy mixture was synthesized through the reaction of a low-molecular-weight liquid epoxy resin with triethylenetetramine(TETA).Then triethyltetramine(TETA)was injected dropwise into a pro-pylene glycol methyl ether(PM)solution for chain extension reaction.A hydrophilic andflexible polyether seg-ment was introduced into the hardener molecule.The effects of TETA/DGEPG,reaction temperature and reaction time on the epoxy conversion of polyethylene glycol diglycidyl ether(DGEPG)were studied.In addition,several alternate strategies to add epoxy resin to the high-speed dispersion machine and synthesize MEA DGEBA adduct(without catalyst and with bisphenol A diglycidyl ether epoxy resin)were compared.It was found that the higher the molecular weight of triethylenetetramine,the longer the chain segment of the surface active molecule.When the equivalence ratio of amine hydrogen and epoxy group is low,the stability of lotion is good.When the ratio of amine hydrogen to epoxy group is large,the content of triethylenetetramine is small.The main objective of this study is the provision of new data and knowledge for the development of new materials in the coating and electronic industry.

Agglomerating Growth of One-Dimensional Carbon Nano-Materials Synthesized from Ethanol Flames

One-dimensional carbon nano-materials （ODCNMs） synthesized from ethanol flames exhibit various agglomerated morphologies, such as ＂chrysanthemum-like＂, ＂hairball-like＂ or ＂orange-peel-like＂, ＂vertically aligned＂ and ＂wrinkling-pileup＂. The present work studied the agglomerating process and the growth mechanism by using scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. It is thought that the size and distribution of the catalyst particles produced from pretreatment of the substrates play a key role during the formation of agglomerations. It is expected that the steady growth of ODCNMs in flames will be improved through the preparation of the catalysts.

抗菌PP/Rnano-ZnO复合材料的制备及性能研究

以棒状纳米氧化锌(Rnano-ZnO)为抗菌剂、聚丙烯(PP)为基材,采用熔融共混法在双螺杆挤出机中制备了抗菌PP/Rnano-ZnO复合材料。测试了复合材料的抗菌性能,通过DSC法研究了抗菌PP/Rnano-ZnO复合材料中Rnano-ZnO质量分数对结晶性能的影响,采用SEM分析了复合材料冲击断面的微观形貌,采用万能电子拉伸机测试了复合材料的力学性能。结果表明,抗菌PP/Rnano-ZnO复合材料中随着Rnano-ZnO的加入,结晶温度提高了1.81℃,相对结晶度提高了5.03%,冲击强度提高了47.83%,拉伸强度提高了20.96%和断裂伸长率提高了4790%;当抗菌PP/Rnano-ZnO复合材料中Rnano-ZnO质量分数为6.0%时,其力学性能、对大肠杆菌和金黄色葡萄球菌的抗菌效果最佳。

Thermodynamic analysis of growth of ternary Ⅲ-Ⅴ semiconductor materials by molecular-beam epitaxy

Thermodynamic models for molecular-beam epitaxy（MBE） growth of ternary Ⅲ-Ⅴ semiconductor materials are proposed.These models are in agreement with our experimental materials InGaP/GaAs and InGaAs/InP,and reported GaAsP/GaAs and InAsP/InP in thermodynamic growth.The lattice strain energy △G and thermal decomposition sensitive to growth temperature are demonstrated in the models simultaneously.△G is the function of the alloy composition,which is affected by flux ratio and growth temperature directly.The calculation results reveal that flux ratio and growth temperature mainly influence the growth process.Thermodynamic model of quaternary InGaAsP/GaAs semiconductor material is discussed also.

Carbon dioxide catalytic conversion to nano carbon material on the iron–nickel catalysts using CVD-IP method

The over-consumption of fossil fuels resulted in the large quantity emission of carbon dioxide （CO2）, which was the main reason for the climate change and more extreme weathers. Hence, it is extremely pressing to ex- plore efficient and sustainable approaches for the carbon-neutral pathway of CO2 utilization and recycling. In our recent works with this context, we developed successfully a novel ＂chemical vapor deposition integrated process （CVD-IP）＂ technology to converting robustly CO2 into the value-added solid-form carbon materials, The monometallic FeNi0-Al2O3 （FNi0） and bimetallic FeNix-Al2O3 （FNi2, FNi4, FNi8 and FNi20） samples were synthesized and effective for this new approach. The catalyst labeled FNi8 gave the better performance, exhibited the single pass solid carbon yield of 30%. These results illustrated alternative promising cases for the CO2 capture utilization storage （CCUS）, by means of the CO2 catalytic conversion into the solid-form nano carbon materials.

Simple Modifications to Standard TRIzol®Protocol Allow High-Yield RNA Extraction from Cells on Resorbable Materials

Resorbable bioceramics are attractive for medical applications such as bone substitution. Biochemical analysis on cells cultured on these biomaterials is vital to predict the impact of the materials in vivo and RNA extraction is an essential step in gene expression study using RT-qPCR. In this study, we describe simple modifications to the TRIzol? RNA extraction protocol widely used in biology and these allow high-yield extraction of RNA from cells on resorbable calcium phosphates. Without the modifications, RNA is trapped in the co-precipitated calcium compounds, rendering TRIzol? extraction method infeasible. Among the modifications, the use of extra TRIzol? to dilute the lysate before the RNA precipitation step is critical for extraction of RNA from porous ?-tricalcium phosphate (?-TCP) discs. We also investigate the rationale behind the undesirable precipitation so as to provide clues about the modifications required for other resorbable materials with high application potential in bone tissue engineering.

Preparation and Fluorescence Properties of TiO_2∶Eu Nano-Materia ls

A series of europium-doped titanium dioxide (TiO 2) fluorescent nano-material s prepared by sol-gel method is presented. The phase structure and crystalline sizes of TiO 2∶Eu, which is doped with different europium content and then he at-treated at different temperature, were investigated by XRD,TG,DTA and TEM. The results show that europium could be introduced into TiO 2 under high temper ature and it can suppress the structural phase transition from anatase to rutile and the crystal growth of TiO 2 in TiO 2∶Eu nano-materials. The fluorescenc e spectra were examined by fluorescence spectrophotometer, and the results show that the fluorescence intensity is the strongest when europium content is 2.68%( mole fraction) and the heat-treated temperature is 700 ℃. From the measurement results of the fluorescence lifetimes, it can be seen that the fluorescence lifetime c ould be prolonged when europium is incorporated in TiO 2.

Adsorption of phenol from aqueous solution by a hierarchical micro-nano porous carbon material

A hierarchical micro-nano porous carbon material (MNC) was prepared using expanded graphite (EG), sucrose, and phosphoric acid as raw materials, followed by sucrose-phosphoric acid solution impregnation, solidification, carbonization and activation. Nitrogen adsorption and mercury porosimetry show that mixed nanopores and micropores coexist in MNC with a high specific surface area of 1978 m2·g-1 and a total pore volume of 0.99 cm3·g-1. In addition, the MNC is found to consist of EG and activated carbon with the latter deposited on the interior and the exterior surfaces of the EG pores. The thickness of the activated carbon layer is calculated to be about one hundred nanometers and is further confirmed by scanning electron microscope (SEM) and transmission election microscope (TEM). A maximum static phenol adsorption of 241.2 mg·g-1 was obtained by using MNC, slightly higher than that of 220.4 mg·g-1 by using commercial activated carbon (CAC). The phenol adsorption kinetics were investigated and the data fitted well to a pseudo-second-order model. Also, an intra-particle diffusion mechanism was proposed. Furthermore, it is found that the dynamic adsorption capacity of MNC is nearly three times that of CAC. The results suggest that the MNC is a more efficient adsorbent than CAC for the removal of phenol from aqueous solution.

Direct Synthesis of Al_2O_3-modified Li(Ni_(0.5)Co_(0.2)Mn_(0.3))O_2 Cathode Materials for Lithium Ion Batteries

To improve the cyclic stability at high temperature and thermal stability, the spherical Al2O3-modified Li（Ni0.5Co0.2Mn0.3）O2 was synthesized by a modified co-precipitation method, and the physical and electrochemical properties were studied. The TEM images showed that Li（Ni0.5Co0.2Mn0.3）O2 was modified successfully with nano-Al2O3. The discharge capacity retention of Al2O3-modified Li（Ni0.5Co0.2Mn0.3）O2 maintained about 99% after 200 cycles at high temperature（55 ℃）, while that of the bare one was only 86%. Also, unlike bare Li（Ni0.5Co0.2Mn0.3）O2, the Al2O3-modified material cathode exhibited good thermal stability.

Preparation of nano-PANI@MnO_2 by surface initiated polymerization method using as a nano-tubular electrode material:The amount effect of aniline on the microstructure and electrochemical performance

In this study,nano-polyanline and manganese oxide nanometer tubular composites（nano-PANI@MnO2）were prepared by a surface initiated polymerization method and used as electrochemical capacitor electrode materials; and the effect of aniline amount on the microstructure and electrochemical performance was investigated. The microstructures and surface morphologies of nano-PANI@MnO2 were characterized by X-ray diffraction,scanning electron microscopy and fourier transformation infrared spectroscope. The electrochemical performance of these composite materials was performed with cyclic voltammetry,charge–discharge test and electrochemical impedance spectroscopy,respectively. The results demonstrate that the feed ratio of aniline to MnO2 played a very important role in constructing the hierarchically nano-structure,which would,hence,determine the electrochemical performance of the materials. Using the templateassisted strategy and controlling the feed ratio of aniline to MnO2,the nanometer tubular structure of nanoPANI@MnO2 was obtained. A maximum specific capacitance of 386 F/g was achieved in aqueous 1 mol/L Na NO3 electrolyte with the potential range from 0 to 0.6 V（vs. SCE）.

Investigation of nano-talc as a filling material and a reinforcing agent in high density polyethylene (HDPE)

An experiment of producing high density polyethylene (HDPE) nano-composite filled with 4wt.% talc was presented. Acting as filler and a reinforcing agent in the HDPE, talc powder, sized at around 5 μm, was surface-treated with aluminum diethylene glycol dinitrate coupling agent before adding to the HDPE. Analyses of the reinforced HDPE nano-composite show significant improvement in its mechanical properties including, tensile strength (>26 MPa), break elongation (<1.1%), flexural strength (>22 MPa), and friction coefficients<0.11. The results demonstrate that, after surface-treated, talc can be used as a promising filling material and a reinforcing agent in making HDPE nano-composite.

Preparation and Electrorheological Property of Y_4O(OH)_9(NO_3)-NH_4NO_3 Materials

The new electrorheologicai （ER） material, a particle material composed of Y4O（OH）9（NO3） and NH4NO3, was obtained. They display better ER performance. The shear stress of the suspension of Y4O （OH）9 （NO3） （ NH4NO3 ）2.8 material in dimethyl silicone oil reaches 1469 Pa at an electric field strength （E） of 4.2 kV·mm^-1 and the shear rate （7） of 150 s^-1 The relative shear stress, τ E/τ0（ τE and τ0 are the shear stresses at E = 4.2 and 0 kV·mm^-1 respectively）, is up to 29, which is 19 times that of pure Y2O3 material. The dielectric and conductive property of the materials play important roles in the modification of the ER effect of the particle materials. The researches on these new ER materials are very useful for obtaining a better understanding on the mechanism of the ER effect and finding an ideal ER material.

Experimental Research on Toluene Degradation in Plasma as the Driving Force of Nanomaterials

Plasma technology has some shortcomings, such as higher energy consumption and byproducts produced in the reaction process. However non-thermal plasma associated with catalyst can resolve these problems. So this kind of technology was paid more and more attention to treat waste gas. In this paper, we make use of this technology to decompose toluene under different electric field and packed materials. At the same time, the mechanism of toluene decomposition using plasma and catalyst is discussed. The experimental results show toluene decomposition increases with electric field strength increasing and flow velocity and initial concentration decreasing. There are four conditions in plasma: without packed materials (1);with packed materials (2);with BaTiO3 in the surfaces of packed materials (3);and with nanometer Ba0.8Sr0.2Zr0.1Ti0.9O3 (4). Toluene decomposition represents a obvious trend, that is, η(4) > η(3) > η(2) > η(1). The best decomposition efficiency of toluene arrives at 95%.

Vascular endothelial growth factor protein and gene delivery by novel nanomaterials for promoting liver regeneration after partial hepatectomy

Partial hepatectomy(PH)can lead to severe complications,including liver failure,due to the low regenerative capacity of the remaining liver,especially after extensive hepatectomy.Liver sinusoidal endothelial cells(LSECs),whose proliferation occurs more slowly and later than hepatocytes after PH,compose the lining of the hepatic sinusoids,which are the smallest blood vessels in the liver.Vascular endothelial growth factor(VEGF),secreted by hepatocytes,promotes LSEC proliferation.Supplementation of exogenous VEGF after hepatectomy also increases the number of LSECs in the remaining liver,thus promoting the reestablishment of the hepatic sinusoids and accelerating liver regeneration.At present,some shortcomings exist in the methods of supplementing exogenous VEGF,such as a low drug concentration in the liver and the reaching of other organs.Moreover,VEGF should be administered multiple times and in large doses because of its short half-life.This review summarized the most recent findings on liver regeneration and new strategies for the localized delivery VEGF in the liver.

The Microparticles SiOx Loaded on PAN-C Nanofiber as Three-Dimensional Anode Material for High-Performance Lithium-Ion Batteries

Three-dimensional C/SiOx nanofiber anode was prepared by polydimethylsiloxane(PDMS)and polyacrylonitrile(PAN)as precursors via electrospinning and freeze-drying successfully.In contrast to conventional carbon cover-ing Si-based anode materials,the C/SiOx structure is made up of PAN-C,a 3D carbon substance,and SiOx load-ing steadily on PAN-C.The PAN carbon nanofibers and loaded SiOx from pyrolyzed PDMS give increased conductivity and a stable complex structure.When employed as lithium-ion batteries(LIBs)anode materials,C/SiOx-1%composites were discovered to have an extremely high lithium storage capacity and good cycle per-formance.At a current density of 100 mA/g,its reversible capacity remained at 761 mA/h after 50 charge-dis-charge cycles and at 670 mA/h after 200 cycles.The C/SiOx-1%composite aerogel is a particularly intriguing anode candidate for high-performance LIBs due to these appealing qualities.