Zirconia ceramics have become increasingly widely used in recent years and are favored by relevant enterprises. From the traditional dental field to aerospace, parts manufacturing has been used, but there is limited r...Zirconia ceramics have become increasingly widely used in recent years and are favored by relevant enterprises. From the traditional dental field to aerospace, parts manufacturing has been used, but there is limited research on the deformation and damage process of zirconia ceramics. This article analyzes the acoustic emission characteristics of each stage of ceramic damage from the perspective of acoustic emission, and explores its deformation process characteristics from multiple perspectives such as time domain, frequency, and EWT modal analysis. It is concluded that zirconia ceramics exhibit higher brittleness and acoustic emission strength than alumina ceramics, and when approaching the fracture, it tends to generate lower frequency acoustic emission signals.展开更多
The clinical success of dental implants can be improved by achieving optimum implant properties, such as their biomechanical and surface characteristics. Nano-structured coatings can play an important role in improvin...The clinical success of dental implants can be improved by achieving optimum implant properties, such as their biomechanical and surface characteristics. Nano-structured coatings can play an important role in improving the implant surface. The purpose of the present study was to determine the most appropriate conditions for electrophoretic deposition （EPD） of nano-zirconia coatings on Ti-6A1-7Nb substrates and to evaluate the structural and biomechanical characteristics of these deposited coatings on the dental implants. EPD was used with different applied voltages and time periods to obtain a uniform layer of nano-zirconia on Ti-6A1-7Nb samples. The coated samples were weighed and the thickness of the product layer was measured. Surface analysis was performed by using optical microscopical examination, scanning electron microscope and X-ray diffraction phase analysis. For in vivo examination, 48 screw-designed implants （24 uncoated and 24 nano-zirconia coated） were implanted in both tibiae of 12 white New Zealand rabbits and evaluated biomechanically after 4- and 12-week healing intervals. Results revealed that the use of different conditions for EPD affected the final coating film properties. Increasing the applied voltage and coating time period increased the deposited nano-zirconia film thickness and weight. By selecting the appropriate coating conditions, and analyzing scanning electron microscopical examination and XRD patterns, this technique could produce a thin and continuous nano-zirconia layer with a uniform thickness of the Ti-6A1-7Nb samples. Mechanically, the nano-zirconia-coated implants showed a highly statistically significant difference in removal torque values, while histologically these coated implants enhanced and promoted osseointegration after 4 and 12 weeks of healing, compared with the uncoated ones. In conclusion, EPD is an effective technique for providing a high quality nano-zirconia coating film on dental implant surfaces. Moreover, the osseointegration of these coated dental implants is improved compared with that of uncoated ones.展开更多
This study focused on the comparison of the Pechini and sugar-based combustion synthesis methods to produce nano-zirconia. Zirconium hydroxide was utilized as metal precursor and citric acid, sucrose, and fructose wer...This study focused on the comparison of the Pechini and sugar-based combustion synthesis methods to produce nano-zirconia. Zirconium hydroxide was utilized as metal precursor and citric acid, sucrose, and fructose were used as chelating agents, followed by calcination at 500, 600, and 700°C in air, respectively. Characterization was conducted by thermal analysis, specific surface area measurement, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning and transmission electron microscopy. When sucrose and citric acid were used as chelating agents during synthesis, mixtures of monoclinic and tetragonal phases were formed after calcination at 600 and 700°C. In the fructose samples, the tetragonal structure was the unique characterized phase. The tetragonal parameters in the fructose samples were determined using the diffraction data and the lattice parameter ratio was proven to increase with the temperature increase. Compared with the citrate and sucrose samples, the largest specific surface area(27 m2·g-1) and smallest particle size(39.1 nm) were obtained for the fructose sample after calcination at 700°C. The study revealed the formation of single-phase stabilized tetragonal zirconia using fructose as chelating agent after calcination at 500°C, and the presence and formation mechanism of stabilized tetragonal phase were also discussed on the basis of the X-ray and electron diffraction studies.展开更多
Recently, more and more interest has been focused on zirconia for its unique characteristics. In this paper, via the preceding preparation technique, yttrium can be successfully incorporated into nano-zirconia by a ca...Recently, more and more interest has been focused on zirconia for its unique characteristics. In this paper, via the preceding preparation technique, yttrium can be successfully incorporated into nano-zirconia by a cationic surfactant-assisted route. The methods of XRD, TEM, EDS, Uv-vis and N2 adsorption-desorption are adopted to characterize the synthesized samples. The results show that the yttrium has been successfully incorporated into the zirconia lattice, and the thermal stability of yttrium doped zirconia has been enhanced remarkably.展开更多
Advances in metal-free materials and the popularization of Computer-Aided Design and Manufacturing (CAD/CAM) have led to the wide clinical use of all-ceramic crowns for esthetic restorations. A 72-year-old woman prese...Advances in metal-free materials and the popularization of Computer-Aided Design and Manufacturing (CAD/CAM) have led to the wide clinical use of all-ceramic crowns for esthetic restorations. A 72-year-old woman presented to our hospital with unesthetic restorations on the right upper and lower posterior teeth. Intraoral examination revealed poorly fitting metal crown margins. Defective prostheses were removed, and provisional restorations were provided to stabilize the mandibular position. Optical impressions and the maxillomandibular relationship were recorded using an intraoral scanner, and monolithic zirconia crowns were fabricated using CAD/CAM technology for complete veneer crown restorative treatment. Occlusal examination revealed an improvement in occlusal force distribution at initial examination (right side: 33.5%, left side: 66.5%) after placement of the zirconia crowns (right side: 54.9%, left side: 45.1%). Occlusal force and occlusal force distribution area also showed an increasing trend. The Oral Health Impact Profile short form (OHIP-14) score decreased from 7 points at initial examination to 0 points after prosthodontic treatment. Appropriate diagnosis and treatment planning contributed to the increased occlusal force and balanced occlusal force distribution. Therefore, the present case indicates the potential of monolithic zirconia crowns to achieve both esthetic and stable functional outcomes.展开更多
Inspired by structures of natural shells,zirconia-carbon nanocomposites were obtained by using natural chitin from shrimp shells as templates via the sol-gel route in this study.Chitin was dispersed in the water and c...Inspired by structures of natural shells,zirconia-carbon nanocomposites were obtained by using natural chitin from shrimp shells as templates via the sol-gel route in this study.Chitin was dispersed in the water and chelated with the zirconia precursors by amidogen.After a heat treatment for carbonization,nacre-like structures of carbon-zirconia nanocomposites were successfully synthesized.Due to the toughening mechanism of tetragonal zirconia,the mechanical properties of carbon-zirconia composites are further improved.The as-received zirconia/carbon nanocomposite with best mechanical property has a hardness of 5.88GPa and an elastic modulus of 80.6 GPa,which is even stronger than natural shells.This work might facilitate a versatile platform for developing green nanocomposites with reasonably good mechanical properties.展开更多
Zirconia has been extensively used in aerospace,military,biomedical and industrial fields due to its unusual combination of high mechanical,electrical and thermal properties.However,the fundamental and critical phase ...Zirconia has been extensively used in aerospace,military,biomedical and industrial fields due to its unusual combination of high mechanical,electrical and thermal properties.However,the fundamental and critical phase transition process of zirconia has not been well studied because of its difficult first-order phase transition with formidable energy barrier.Here,we generated a machine learning interatomic potential with ab initio accuracy to discover the mechanism behind all kinds of phase transition of zirconia at ambient pressure.The machine learning potential precisely characterized atomic interactions among all zirconia allotropes and liquid zirconia in a wide temperature range.We realized the challenging reversible first-order monoclinic-tetragonal and cubicliquid phase transition processes with enhanced sampling techniques.From the thermodynamic information,we gave a better understanding of the thermal hysteresis phenomenon in martensitic monoclinic-tetragonal transition.The phase diagram of zirconia from our machine learning potential based molecular dynamics simulations corresponded well with experimental results.展开更多
In order to investigate the effect of zirconia corundum on the preparation of chrome corundum castables,samples were prepared using tabular corundum,white fused corundum,active alumina micropowder,chromium oxide micro...In order to investigate the effect of zirconia corundum on the preparation of chrome corundum castables,samples were prepared using tabular corundum,white fused corundum,active alumina micropowder,chromium oxide micropowder and fused ziconia corundum particles as the main raw materials,and pure calcium aluminate cement as the binder.The effects of the fused zirconia corundum particles addition(1-0.5 mm,0,4.5%,9%,and 18%,by mass)on the linear change rate,the apparent porosity,the cold modulus of rupture,and the thermal shock resistance of chrome corundum castables were studied,and the microstructure of the samples was analyzed.The results show that:(1)with the zirconia corundum addition increasing,the permanent linear change on heating of the samples gradually increases,the apparent porosity gradually increases,the cold modulus of rupture gradually decreases,and the thermal shock resistance gradually increases;(2)according to SEM,it can be found that the phase transformation of ZrO2 after heat treatment leads to a large number of microcracks in the material.On one hand,the cold modulus of rupture of the material is reduced;on the other hand,the thermal shock resistance of the material is improved.展开更多
The sintering behavior and mechanical properties of zirconia doped with 2.0mol%-3.0mol%Y_(2)O_(3)were studied by pressure-less sintering.The experimental results show that the densification temperature of zirconia cer...The sintering behavior and mechanical properties of zirconia doped with 2.0mol%-3.0mol%Y_(2)O_(3)were studied by pressure-less sintering.The experimental results show that the densification temperature of zirconia ceramics increases gradually with the decrease of Y_(2)O_(3)doping content by which decreases the sintering driving force due to the lower oxygen vacancy concentration of the systems.Furthermore,the bending strength and fracture toughness of the prepared zirconia ceramics increase with the decrease of Y_(2)O_(3)doping content.It can be attributed to the fact that the phase stability of tetragonal zirconia decreases with the decrease of Y_(2)O_(3)doping content,which is easier to induce"phase transformation toughening"and dissipate impact energy.The relative density,bending strength and fracture toughness of 2.0 mol%Y_(2)O_(3)doped zirconia ceramics(2.0Y-ZrO_(2))sintered at 1525℃are 99.00%,1256.65±20.82 MPa and 9.85±0.13 MPa·m^(1/2),respectively.展开更多
文摘Zirconia ceramics have become increasingly widely used in recent years and are favored by relevant enterprises. From the traditional dental field to aerospace, parts manufacturing has been used, but there is limited research on the deformation and damage process of zirconia ceramics. This article analyzes the acoustic emission characteristics of each stage of ceramic damage from the perspective of acoustic emission, and explores its deformation process characteristics from multiple perspectives such as time domain, frequency, and EWT modal analysis. It is concluded that zirconia ceramics exhibit higher brittleness and acoustic emission strength than alumina ceramics, and when approaching the fracture, it tends to generate lower frequency acoustic emission signals.
文摘The clinical success of dental implants can be improved by achieving optimum implant properties, such as their biomechanical and surface characteristics. Nano-structured coatings can play an important role in improving the implant surface. The purpose of the present study was to determine the most appropriate conditions for electrophoretic deposition （EPD） of nano-zirconia coatings on Ti-6A1-7Nb substrates and to evaluate the structural and biomechanical characteristics of these deposited coatings on the dental implants. EPD was used with different applied voltages and time periods to obtain a uniform layer of nano-zirconia on Ti-6A1-7Nb samples. The coated samples were weighed and the thickness of the product layer was measured. Surface analysis was performed by using optical microscopical examination, scanning electron microscope and X-ray diffraction phase analysis. For in vivo examination, 48 screw-designed implants （24 uncoated and 24 nano-zirconia coated） were implanted in both tibiae of 12 white New Zealand rabbits and evaluated biomechanically after 4- and 12-week healing intervals. Results revealed that the use of different conditions for EPD affected the final coating film properties. Increasing the applied voltage and coating time period increased the deposited nano-zirconia film thickness and weight. By selecting the appropriate coating conditions, and analyzing scanning electron microscopical examination and XRD patterns, this technique could produce a thin and continuous nano-zirconia layer with a uniform thickness of the Ti-6A1-7Nb samples. Mechanically, the nano-zirconia-coated implants showed a highly statistically significant difference in removal torque values, while histologically these coated implants enhanced and promoted osseointegration after 4 and 12 weeks of healing, compared with the uncoated ones. In conclusion, EPD is an effective technique for providing a high quality nano-zirconia coating film on dental implant surfaces. Moreover, the osseointegration of these coated dental implants is improved compared with that of uncoated ones.
文摘This study focused on the comparison of the Pechini and sugar-based combustion synthesis methods to produce nano-zirconia. Zirconium hydroxide was utilized as metal precursor and citric acid, sucrose, and fructose were used as chelating agents, followed by calcination at 500, 600, and 700°C in air, respectively. Characterization was conducted by thermal analysis, specific surface area measurement, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning and transmission electron microscopy. When sucrose and citric acid were used as chelating agents during synthesis, mixtures of monoclinic and tetragonal phases were formed after calcination at 600 and 700°C. In the fructose samples, the tetragonal structure was the unique characterized phase. The tetragonal parameters in the fructose samples were determined using the diffraction data and the lattice parameter ratio was proven to increase with the temperature increase. Compared with the citrate and sucrose samples, the largest specific surface area(27 m2·g-1) and smallest particle size(39.1 nm) were obtained for the fructose sample after calcination at 700°C. The study revealed the formation of single-phase stabilized tetragonal zirconia using fructose as chelating agent after calcination at 500°C, and the presence and formation mechanism of stabilized tetragonal phase were also discussed on the basis of the X-ray and electron diffraction studies.
基金Supported by the Key High-level Scientific and Technical Project of Fujian Department of Science and Technology (2004H008)
文摘Recently, more and more interest has been focused on zirconia for its unique characteristics. In this paper, via the preceding preparation technique, yttrium can be successfully incorporated into nano-zirconia by a cationic surfactant-assisted route. The methods of XRD, TEM, EDS, Uv-vis and N2 adsorption-desorption are adopted to characterize the synthesized samples. The results show that the yttrium has been successfully incorporated into the zirconia lattice, and the thermal stability of yttrium doped zirconia has been enhanced remarkably.
文摘Advances in metal-free materials and the popularization of Computer-Aided Design and Manufacturing (CAD/CAM) have led to the wide clinical use of all-ceramic crowns for esthetic restorations. A 72-year-old woman presented to our hospital with unesthetic restorations on the right upper and lower posterior teeth. Intraoral examination revealed poorly fitting metal crown margins. Defective prostheses were removed, and provisional restorations were provided to stabilize the mandibular position. Optical impressions and the maxillomandibular relationship were recorded using an intraoral scanner, and monolithic zirconia crowns were fabricated using CAD/CAM technology for complete veneer crown restorative treatment. Occlusal examination revealed an improvement in occlusal force distribution at initial examination (right side: 33.5%, left side: 66.5%) after placement of the zirconia crowns (right side: 54.9%, left side: 45.1%). Occlusal force and occlusal force distribution area also showed an increasing trend. The Oral Health Impact Profile short form (OHIP-14) score decreased from 7 points at initial examination to 0 points after prosthodontic treatment. Appropriate diagnosis and treatment planning contributed to the increased occlusal force and balanced occlusal force distribution. Therefore, the present case indicates the potential of monolithic zirconia crowns to achieve both esthetic and stable functional outcomes.
基金the National Key Research and Development Program of China(No.2021YFA0715700)the National Natural Science Foundation of China(Nos.51521001 and 51832003)the 111 Project(No.B18038)。
文摘Inspired by structures of natural shells,zirconia-carbon nanocomposites were obtained by using natural chitin from shrimp shells as templates via the sol-gel route in this study.Chitin was dispersed in the water and chelated with the zirconia precursors by amidogen.After a heat treatment for carbonization,nacre-like structures of carbon-zirconia nanocomposites were successfully synthesized.Due to the toughening mechanism of tetragonal zirconia,the mechanical properties of carbon-zirconia composites are further improved.The as-received zirconia/carbon nanocomposite with best mechanical property has a hardness of 5.88GPa and an elastic modulus of 80.6 GPa,which is even stronger than natural shells.This work might facilitate a versatile platform for developing green nanocomposites with reasonably good mechanical properties.
基金the Creative Research Groups of National Natural Science Foundation of China(Grant No.51921006)National Natural Science Foundation of China(Grant No.52322803)。
文摘Zirconia has been extensively used in aerospace,military,biomedical and industrial fields due to its unusual combination of high mechanical,electrical and thermal properties.However,the fundamental and critical phase transition process of zirconia has not been well studied because of its difficult first-order phase transition with formidable energy barrier.Here,we generated a machine learning interatomic potential with ab initio accuracy to discover the mechanism behind all kinds of phase transition of zirconia at ambient pressure.The machine learning potential precisely characterized atomic interactions among all zirconia allotropes and liquid zirconia in a wide temperature range.We realized the challenging reversible first-order monoclinic-tetragonal and cubicliquid phase transition processes with enhanced sampling techniques.From the thermodynamic information,we gave a better understanding of the thermal hysteresis phenomenon in martensitic monoclinic-tetragonal transition.The phase diagram of zirconia from our machine learning potential based molecular dynamics simulations corresponded well with experimental results.
文摘In order to investigate the effect of zirconia corundum on the preparation of chrome corundum castables,samples were prepared using tabular corundum,white fused corundum,active alumina micropowder,chromium oxide micropowder and fused ziconia corundum particles as the main raw materials,and pure calcium aluminate cement as the binder.The effects of the fused zirconia corundum particles addition(1-0.5 mm,0,4.5%,9%,and 18%,by mass)on the linear change rate,the apparent porosity,the cold modulus of rupture,and the thermal shock resistance of chrome corundum castables were studied,and the microstructure of the samples was analyzed.The results show that:(1)with the zirconia corundum addition increasing,the permanent linear change on heating of the samples gradually increases,the apparent porosity gradually increases,the cold modulus of rupture gradually decreases,and the thermal shock resistance gradually increases;(2)according to SEM,it can be found that the phase transformation of ZrO2 after heat treatment leads to a large number of microcracks in the material.On one hand,the cold modulus of rupture of the material is reduced;on the other hand,the thermal shock resistance of the material is improved.
基金Funded by the National Key Research and Development Plan of China(No.2021YFB3701401)the National Natural Science Foundation of China(Nos.92163208,51902233,51972243,51521001,and 51832003)。
文摘The sintering behavior and mechanical properties of zirconia doped with 2.0mol%-3.0mol%Y_(2)O_(3)were studied by pressure-less sintering.The experimental results show that the densification temperature of zirconia ceramics increases gradually with the decrease of Y_(2)O_(3)doping content by which decreases the sintering driving force due to the lower oxygen vacancy concentration of the systems.Furthermore,the bending strength and fracture toughness of the prepared zirconia ceramics increase with the decrease of Y_(2)O_(3)doping content.It can be attributed to the fact that the phase stability of tetragonal zirconia decreases with the decrease of Y_(2)O_(3)doping content,which is easier to induce"phase transformation toughening"and dissipate impact energy.The relative density,bending strength and fracture toughness of 2.0 mol%Y_(2)O_(3)doped zirconia ceramics(2.0Y-ZrO_(2))sintered at 1525℃are 99.00%,1256.65±20.82 MPa and 9.85±0.13 MPa·m^(1/2),respectively.
