In order to clarify the influence of methane concentration and deposition time on self-organized nano-multilayers,three serial copper-carbon films have been prepared at various methane concentrations with different de...In order to clarify the influence of methane concentration and deposition time on self-organized nano-multilayers,three serial copper-carbon films have been prepared at various methane concentrations with different deposition times using a facile magnetron sputtering deposition system. The ratios of methane concentration(CH4/Ar+CH4) used in the experiments are 20%, 40%, and 60%, and the deposition times are 5 minutes, 20 minutes, and 40 minutes, respectively.Despite the difference in the growth conditions, self-organizing multilayered copper-carbon films are prepared at different deposition times by changing methane concentration. The film composition and microstructure are investigated by x-ray photoelectron spectroscopy(XPS), x-ray diffraction(XRD), field emission scanning electron microscopy(FESEM), and high-resolution transmission electron microscopy(HRTEM). By comparing the composition and microstructure of three serial films, the optimal growth conditions and compositions for self-organizing nano-multilayers in copper-carbon film are acquired. The results demonstrate that the self-organized nano-multilayered structure prefers to form in two conditions during the deposition process. One is that the methane should be curbed at low concentration for long deposition time,and the other condition is that the methane should be controlled at high concentration for short deposition time. In particular, nano-multilayered structure is self-organized in the copper-carbon film with copper concentration of 10-25 at.%.Furthermore, an interesting microstructure transition phenomenon is observed in copper-carbon films, that is, the nanomultilayered structure is gradually replaced by a nano-composite structure with deposition time and finally covered by amorphous carbon.展开更多
DC-magnetron sputtering was employed to prepare Fe-N/Ti-N periodic nano-multilayers . Magnetic properties were studied by vibrating sample magnetometry and structure by TEM and X-ray diffraction for the films. A stron...DC-magnetron sputtering was employed to prepare Fe-N/Ti-N periodic nano-multilayers . Magnetic properties were studied by vibrating sample magnetometry and structure by TEM and X-ray diffraction for the films. A strong enhancement of the saturation magnetization was found in multilayers containing thinner Fe-N layers. The coercivity was found to be nearly constant. A kind of anomalous hysteresis loops was found in some展开更多
Fe46Co44B10/SiO2 nano-multilayers were synthesized by radio frequency magnetron sputtering. The thickness of individual layer was designed and controlled in nano-meter. The effect of thickness of ferromagnetic layer, ...Fe46Co44B10/SiO2 nano-multilayers were synthesized by radio frequency magnetron sputtering. The thickness of individual layer was designed and controlled in nano-meter. The effect of thickness of ferromagnetic layer, insulative layer or the total number of layers on the intrinsic characteristics and microwave permeability were investigated respectively. The results show that, saturation magnetization changes obviously with different thicknesses of ferromagnetic layer or insulative layer, but coercivity changes little and remains small. When the thickness of ferromagnetic layer and insulative layer keeps 1.5 and 1.3 nm respectively and the number of the total layers increases from 10 to 90, coercivity reduces and resistivity of the films improves from 0.25 to 2.22 π·m. The resonant frequency locates at the point higher than 2 GHz and the imaginary part of complex permeability at 2 GHz is larger than 150. These multilayer films can be applied in the field of micromagnetic devices or anti-interference of electromagnetic wave.展开更多
NiO films were fabricated by reactive direct current magnetron sputtering on glass and alumina substrates for the application in energetic nano-multilayers. The structural and thermal properties of the films were inve...NiO films were fabricated by reactive direct current magnetron sputtering on glass and alumina substrates for the application in energetic nano-multilayers. The structural and thermal properties of the films were investigated with the volume ratio of oxygen to argon ranging from 1:9 to 3:2, and the optimized ratio value is obtained as 1:3, which was confirmed by X-ray diffraction (XRD), atomic force microscopy and ultrafast measure- ment system. The effect of the film thickness, varying from 150 to 900 nm, on the structural properties was characterized by XRD and scanning electron microscopy (SEM). XRD analysis reveals that the (111) lattice plane is the preferred orientation. The intensities of preferential peaks and the grain sizes increase as the film thicknesses increase.展开更多
Plasma-activated electron beam-physical vapor deposition(EB-PVD)was used for depositing nitride multilayer coatings in this work.Different from the conventional coating methods,the multilayers were obtained by manip...Plasma-activated electron beam-physical vapor deposition(EB-PVD)was used for depositing nitride multilayer coatings in this work.Different from the conventional coating methods,the multilayers were obtained by manipulating electron beam(EB)to jump between two different evaporation sources alternately with variable frequencies(jumping beam technology).The plasma activation was generated by a hollow cathode plasma unit.The deposition process was demonstrated by means of tailoring TiN/TiAlN multilayers with different modulation periods(M1:26.5 nm,M2:80.0 nm,M3:6.0 nm,M4:4.0 nm).The microstructure and hardness of the multilayer coatings were comparatively studied with TiN and TiAlN singlelayer coatings.The columnar structure of the coatings(TiN,TiAlN,M1,M2)is replaced by a glassy-like microstructure when the modulation period decreases to less than 10 nm(M3,M4).Simultaneously,superlattice growth occurs.With the decrease of modulation period,both the hardness and the plastic deformation resistance(H^3/E^2,H-hardness and E-elastic modulus)increase.M4coating exhibits the maximum hardness of(49.6±2.7)GPa and the maximum plastic deformation resistance of^0.74 GPa.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.51472250,U1637204,and 51775537)
文摘In order to clarify the influence of methane concentration and deposition time on self-organized nano-multilayers,three serial copper-carbon films have been prepared at various methane concentrations with different deposition times using a facile magnetron sputtering deposition system. The ratios of methane concentration(CH4/Ar+CH4) used in the experiments are 20%, 40%, and 60%, and the deposition times are 5 minutes, 20 minutes, and 40 minutes, respectively.Despite the difference in the growth conditions, self-organizing multilayered copper-carbon films are prepared at different deposition times by changing methane concentration. The film composition and microstructure are investigated by x-ray photoelectron spectroscopy(XPS), x-ray diffraction(XRD), field emission scanning electron microscopy(FESEM), and high-resolution transmission electron microscopy(HRTEM). By comparing the composition and microstructure of three serial films, the optimal growth conditions and compositions for self-organizing nano-multilayers in copper-carbon film are acquired. The results demonstrate that the self-organized nano-multilayered structure prefers to form in two conditions during the deposition process. One is that the methane should be curbed at low concentration for long deposition time,and the other condition is that the methane should be controlled at high concentration for short deposition time. In particular, nano-multilayered structure is self-organized in the copper-carbon film with copper concentration of 10-25 at.%.Furthermore, an interesting microstructure transition phenomenon is observed in copper-carbon films, that is, the nanomultilayered structure is gradually replaced by a nano-composite structure with deposition time and finally covered by amorphous carbon.
文摘DC-magnetron sputtering was employed to prepare Fe-N/Ti-N periodic nano-multilayers . Magnetic properties were studied by vibrating sample magnetometry and structure by TEM and X-ray diffraction for the films. A strong enhancement of the saturation magnetization was found in multilayers containing thinner Fe-N layers. The coercivity was found to be nearly constant. A kind of anomalous hysteresis loops was found in some
基金Project(60771028) supported by the National Natural Science Foundation of ChinaProject(20091208) supported by the Postdoctoral Foundation of Central South UniversityProject(PM200815) supported by State Key Laboratory of Powder Metallurgy
文摘Fe46Co44B10/SiO2 nano-multilayers were synthesized by radio frequency magnetron sputtering. The thickness of individual layer was designed and controlled in nano-meter. The effect of thickness of ferromagnetic layer, insulative layer or the total number of layers on the intrinsic characteristics and microwave permeability were investigated respectively. The results show that, saturation magnetization changes obviously with different thicknesses of ferromagnetic layer or insulative layer, but coercivity changes little and remains small. When the thickness of ferromagnetic layer and insulative layer keeps 1.5 and 1.3 nm respectively and the number of the total layers increases from 10 to 90, coercivity reduces and resistivity of the films improves from 0.25 to 2.22 π·m. The resonant frequency locates at the point higher than 2 GHz and the imaginary part of complex permeability at 2 GHz is larger than 150. These multilayer films can be applied in the field of micromagnetic devices or anti-interference of electromagnetic wave.
基金financially supported by the Military Pre-Research fund(No.9140A12040412DZ02138)
文摘NiO films were fabricated by reactive direct current magnetron sputtering on glass and alumina substrates for the application in energetic nano-multilayers. The structural and thermal properties of the films were investigated with the volume ratio of oxygen to argon ranging from 1:9 to 3:2, and the optimized ratio value is obtained as 1:3, which was confirmed by X-ray diffraction (XRD), atomic force microscopy and ultrafast measure- ment system. The effect of the film thickness, varying from 150 to 900 nm, on the structural properties was characterized by XRD and scanning electron microscopy (SEM). XRD analysis reveals that the (111) lattice plane is the preferred orientation. The intensities of preferential peaks and the grain sizes increase as the film thicknesses increase.
基金financially supported by the National Natural Science Foundations of China(Nos.51201005 and 51231001)
文摘Plasma-activated electron beam-physical vapor deposition(EB-PVD)was used for depositing nitride multilayer coatings in this work.Different from the conventional coating methods,the multilayers were obtained by manipulating electron beam(EB)to jump between two different evaporation sources alternately with variable frequencies(jumping beam technology).The plasma activation was generated by a hollow cathode plasma unit.The deposition process was demonstrated by means of tailoring TiN/TiAlN multilayers with different modulation periods(M1:26.5 nm,M2:80.0 nm,M3:6.0 nm,M4:4.0 nm).The microstructure and hardness of the multilayer coatings were comparatively studied with TiN and TiAlN singlelayer coatings.The columnar structure of the coatings(TiN,TiAlN,M1,M2)is replaced by a glassy-like microstructure when the modulation period decreases to less than 10 nm(M3,M4).Simultaneously,superlattice growth occurs.With the decrease of modulation period,both the hardness and the plastic deformation resistance(H^3/E^2,H-hardness and E-elastic modulus)increase.M4coating exhibits the maximum hardness of(49.6±2.7)GPa and the maximum plastic deformation resistance of^0.74 GPa.