Characteristics of Nappes and Segmentation of the Longmen Mountains Thrust Belt, Western Sichuan Basin, China

In order to reveal the nature of the segmentation of Longmen Mountains Thrust Belt caused by the three nappes (Jiaoziding, Jiudingshan, and Baoxing Nappe), several methods are applied in this paper, including field investigation, seismic explanation and balanced crossed section, etc. Results of research reveal that nappes in Longmen Mountains vary in geometry, kinematics, and dynamics. Jiaoziding Nappe has generally behaved in a ductile manner, whereas Jiudingshan Nappe has been rigid, and the rheology of Baoxing Nappe has been intermediate between that of the other two nappes. The development of nappes has resulted in tectonic segmentation of Longmen Mountains: the main structural style of the northern segment is thrust faulting, with Jiaoziding Nappe representing a giant syncline. Given its ductility, it absorbed lots of stress, with the least amount of tectonic shortening in the SE part of the nappe. In the middle segment, the deformation is controlled by the rigid Jiudingshan Nappe, whose frontal area records lots of tectonic shortening. Deformation in the southern segment is intermediate in character between that of the other two segments, characterized by horizontal zonation, as demonstrated by fault development, and vertical stratification, which indicates that fault development was controlled by lithology.

Analysis of Nappes and Glided Nappes in China

ＡｎａｌｙｓｉｓｏｆＮａｐｐｅｓａｎｄＧｌｉｄｅｄＮａｐｐｅｓｉｎＣｈｉｎａ￥ＹａｎｇＫｅｓｈｅｎｇ（ＢｕｒｅａｕｏｆｏｉｌＧｅｏｐｈｙｓｉｃａｌＰｒｏｓｐｅｃｔｉｎｇ）Ｋｅｙｗｏｒｄｓ：Ｎａｐｐｅ．Ｓｔｒｕｃｔｕｒｅ．Ｔｈｒｕｓｔｆａｕｌｔ．Ｔｅｃ...

Early Cretaceous Thrust and Nappe Tectonics in North Qilian Shan,Northern Tibetan Plateau:Evidence from Field Mapping,Geochronology,and Deep Structural Analysis

The North Qilian Shan fold and thrust belt,located at the northern Tibetan Plateau and southern margin of the Hexi Corridor,is a key tectonic unit to decode the formation and expansion of the plateau.Previous studies emphasize the Cenozoic deformation due to the far-field response to the Indo-Asian collision,but the Mesozoic deformations are poorly constrained in this area.We conducted detailed field mapping,structural analysis,geochronology,and structural interpretation of deep seismic reflectional profiling and magnetotelluric(MT)sounding,to address the superposed results of the Mesozoic and Cenozoic deformation.The results recognized the North Qilian thrust and nappe system(NQTS),the root and the frontal belt are the North Qilian thrust(NQT),and the Yumu Shan klippe(YK),respectively.The middle belt is located between the NQT and the YK.Monzonitic granite zircon U-Pb dating from the middle belt yields an age of ca.415 Ma,which is similar to south NQT.The thrusting displacement is estimated at ca.48 km by structural interpretation of deep profiles.The timing is constrained in the early stage of the Early Cretaceous by the formation of simultaneous growth strata.We suggest that the NQTS has resulted from the far-field effect of the Lhasa-Qiangtang collision,and the Yumu Shan is uplifted by the superposed Cenozoic deformation.

Triassic Nappe in the Central Part of the Southern Central Asian Orogenic Belt(Ejinaq,NW China):Evidence from Structural Analysis and Geothermochronology

The thrust nappe played an important role in the Mesozoic tectonic evolution of the middle part of the Central Asian Orogenic Belt(CAOB).However,the timing,structural style and kinematic processes of the thrust nappe remain controversial,particularly the detail of the thrust nappe in the Guaizihu region(110 km east of Ejinaq).In this study,we investigate new field mapping,seismic sections,geochronology and low-temperature thermochronometric dating to provide constraints on the history of this thrust nappe in the Chaheilingashun area(northwestern Guaizihu region).The field mapping,seismic sections and structural analysis reveal that the autochthonous system had developed a series of strong fold structures in the upper Permian strata.The allochthonous system mainly contains Devonian monzogranite(U-Pb age,ranges from 386.7 to 389.0 Ma)and Meso–Neoproterozoic schists(the maximum depositional age,~880 Ma),which were thrust upon the upper Permian strata during Middle to Late Triassic.Based on similar rocks,geochronological dating and the Yagan thrust,we suggest that the postulated root zone of this allochthon might have originated from the Huhetaoergai area(40–60 km northwest of the study area).The geochronological results reveal that the lower age limit of this thrust nappe is constrained by the Lower–Middle Triassic syntectonic sediments(tuffaceous sandstone,~247 Ma),which is the sedimentary response of the fold structure.,The timing of the termination of this thrust nappe is defined by the cooling age(^(40)Ar/^(39)Ar data,217–211 Ma)of the Devonian monzogranite and Meso–Neoproterozoic schists.Thus,we consider this thrust event in the study area to potentially have occurred in the period from 247 Ma to 211 Ma,which may represent the tectonic response to the closure of the Paleo-Asian Ocean.

结核分枝杆菌铁氧还蛋白还原酶FdrA和FprA在CYP125A1的电子传递链中的作用分析

目的体外评价结核分枝杆菌(Mtb)铁氧还蛋白还原酶FdrA和FprA的活性,探索它们分别与两种铁氧还蛋白的偶联作用,并分析它们在CYP125A1的电子传递链中的作用。方法采用大肠杆菌作为宿主克隆结核分枝杆菌FdrA、FprA和CYP125A1编码基因并进行蛋白外源表达;以NADH或NADPH为电子供体,2,6-二氯酚靛酚(DCPIP)为电子受体评价FdrA及FprA的活性;应用细胞色素C为电子受体研究FdrA或FprA与不同铁氧还蛋白的偶联作用;分析CYP125A1对4-胆甾烯-3-酮的代谢作用进而研究FdrA和FprA在CYP125A1的电子传递链中的作用。结果 FdrA对NADH亲和力较高,Fdx对FdrA活性有明显提升作用,菠菜铁氧还蛋白(spFDX)对其活性没有提升作用,FdrA/Fdx和FdrA/spFDX均不能支持CYP125A1的活性。FprA对NAPDH亲和力较高,Fdx和spFDX均对FprA活性有明显提升作用,Fdx尤甚,FprA/spFDX可以支持CYP125A1的活性,FprA/Fdx不能支持CYP125A1的活性。结论 FprA是结核分枝杆菌CYP125A1的电子传递链蛋白,FdrA可能不是CYP125A1的电子传递链蛋白。

基于移动技术的数字农业系统设计

通过介绍数字农业系统整体方案和接入协议的设计,系统以Linux为开发环境,用JSP和Java为开发工具,开发出基于移动技术的数字农业平台.整个系统主要有短信交互平台、WEB管理平台、USSD服务平台和WAP服务平台4个子系统组成,采用数字农业点对点协议(Numeral Agriculture Peer to Peer,NAPP)接入协议,可为用户提供多种接入方式,用户能使用手机等移动设备获取大量的数字农业信息.

Characteristic of Gravity and Magnetic Anomalies in the Daba Shan and the Sichuan basin, China: Implication for Architecture of the Daba Shan

The Dabashan nappe structural belt links the Hannan block to the west with the Huangling block to the east between Yangxian and Xiangfan. The Dabashan arc-shaped fold belt formed during late Jurassic and was superposed on earlier Triassic folds. To achieve an improved understanding of the deep tectonics of the Dabashan nappe structural belt, we processed and interpreted the gravity and magnetic data for this area using new deep reflection seismic and other geophysical data as constraints. The results show that the Sichuan basin and Daba Mountains lie between the Longmenshan and Wulingshan gravity gradient belts. The positive magnetic anomalies around Nanchong-Tongjiang-Wanyuan-Langao and around Shizhu result from the crystalline basement. Modeling of the gravity and magnetic anomalies in the Daba Mountains and the Sichuan basin shows that the crystalline basement around Nanchong-Tongjiang-Wanyuan-Langao extends to the northeast underneath the Wafangdian fault near Ziyang. The magnetic field boundary in the Zhenba-Wanyuan-Chengkou-Zhenping area is the major boundary of the Dabashan nappe thrusting above the Sichuan Basin. This boundary might be the demarcation between the south Dabashan and the north Dabashan structural elements. The low gravity anomaly between Tongjiang and Chengkou might be partly caused by thickened lower crust. The local low gravity anomaly to the south of Chengkou-Wanyuan might result from Mesozoic strata of low density in the Dabashan foreland depression area.

A Large-scale Tertiary Salt Nappe Complex in the Leading Edge of the Kuqa Foreland Fold-Thrust Belt, the Tarim Basin, Northwest China

The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping faulting monoclines which are made up of Paleocene-Pliocene sediments. Geological analysis and cross-section restoration revealed that the salt nappes were mainly formed at the late Himalayan stage (c.a. 1.64 Ma BP) and have been active until the present day. Because of inhomogeneous thrusting, a great difference may exist in thrust displacement, thrust occurrence, superimposition of allochthonous and autochthonous sequences and the development of the salt-related structures, which indicates the segmentation along the salt nappes. Regional compression, gravitational gliding and spreading controlled the formation and evolution of the salt nappe complex in the Kuqa foreland fold belt.

Rb-Sr and Sm-Nd Isochron Ages of the Dongmozhazhua and Mohailaheng Pb-Zn Ore Deposits in the Yushu area, southern Qinghai and Their Geological Implications

Located on the northeast margin of the Qiangtang terrane between the Jinshajiang suture zone and Bangonghu-Nujiang suture zone,the Dongmozhazhua and Mohailaheng Pb-Zn deposits in the Yushu area of Qinghai Province are representative Pb-Zn deposits of the Pb-Zn-Cu polymetallic mineralization belt in the northern part of the Nujiang-Lancangjiang-Jinshajiang area,which are in the front belt of the Yushu thrust nappe system.The formed environments of these two deposits are different from those of sediment-hosted base metal deposits elsewhere in the world.The authors hold that they were formed during the Indian-Asian continental collision and developed within the fold-thrust belt combined with thrust and strike-slip-related Cenozoic basins in the interior of the collisional zone.Studying on the metallogenic epochs of these two deposits is helpful to the understanding of ore-forming regularity of the regional Pb-Zn-Cu mineralization belt and also to the search for new deposits in this region.The age of the Dongmozhazhua deposit has been determined by the Rb-Sr isochron method for sphalerite residues,whereas the age of the Mohailaheng deposit has been determined by the Rb-Sr isochron method for sphalerite residues and the Sm-Nd isochron method for fluorite.The age of the Dongmozhazhua deposit is 35.0-±0.0 Ma （（87Sr/86Sr）0=0.708807） for sphalerite residues.The age of the Mohailaheng deposit is 32.2±0.4 Ma （（87Sr/86Sr）o=0.708514） for sphalerite residues and 31.8±0.3 Ma （（143Nd/144Nd）o=0.512362） for fluorite with an average of 32.0 Ma.Together with the regional geological setting during mineralization,a possible tectonic model for metallogeny of the Dongmozhazhua and Mohailaheng Pb-Zn deposits has been established.These two ages are close to the ages of the Pb-Zn deposits in the Lanping and Tuotuohe basins,indicating that it is possible that the narrow 1000-kilometer-long belt controlled by a thrust nappe system on the eastern and northern margins of the Tibetan plateau could be a giant Pb-Zn mineralized belt.

Tectonochemistry and p-t Conditions of Ramgarh and Almora Gneisses from Askot Klippe,Kumaun Lesser Himalaya

The chemical and petrological correlation of metamorphic nappes and klippes overlying the Proterozoic sedimentary units in the Kumaun Himalaya is still debated. The Ramgarh and Almora gneisses, not previously distinguished in the Askot Klippe, show distinct field, petrological and chemical signatures markedly similar to the tectonostratigraphic disposition of the Almora Nappe. A negative Eu anomaly in the Ramgarh granitic gneisses indicates lesser plagioclase fractionation while the Eu anomaly in the Almora pelitic gneisses is likely to have been controlled by feldspar crystallization in restites. During the anatexis at > 776°C temperature and >6.6 kbar pressure, the melt moved slightly away to its crystallization sites. The Rb/Sr ratio ?0.54 and Nb ?10 ppm is consistent with the granodioritic composition. The negative Sr anomaly in the underlying Ramgarh granitic gneisses indicates a distinct mantle derived source/plagioclase fractionation with a notable correspondence to other late orogenic granites, particularly the basement Ulleri gneisses from the Nepal Himalaya. Ramgarh gneisses plot in the late-and post-COLG field. The Askot ensemble is likely to be the tectonometamorphically reworked basement, viz. the Ramgarh Group along with its metapelitic cover o f the Almora Group, together comprising southward thrust remnants of the leading edge of the Indian Plate that collided with Tibet during the Tertiary Himalayan orogeny.

Active faults and seismogenic models for the Urumqi city,Xinjiang Autonomous Region, China

We have studied the characteristics of the active faults and seismicity in the vicinity of Urumqi city, the capital of Xinjiang Autonomous Region, China, and have proposed a seismogenic model for the assessment of earthquake hazard in this area. Our work is based on an integrated analysis of data from investigations of active faults at the surface, deep seismic reflection soundings, seismic profiles from petroleum exploration, observations of temporal seismic stations, and the precise location of small earthquakes. We have made a comparative study of typical seismogenic structures in the frontal area of the North Tianshan Mountains, where Urumqi city is situated, and have revealed the primary features of the thrust-fold- nappe structure there. We suggest that Urumqi city is comprised two zones of seismotectonics which are inter- preted as thrust-nappe structures. The first is the thrust nappe of the North Tianshan Mountains in the west, con- sisting of the lower （root） thrust fault, middle detachment, and upper fold-uplift at the front. Faults active in the Pleistocene are present in the lower and upper parts of this structure, and the detachment in the middle spreads toward the north. In the future, M7 earthquakes may occur at the root thrust fault, while the seismic risk of frontal fold-uplift at the front will not exceed M6.5. The second structure is the western flank of the arc-like Bogda nappe in the east, which is also comprised a root thrust fault, middle detachment, and upper fold-uplift at the front, of which the nappe stretches toward the north; several active faults are also developed in it. The fault active in the Holocene is called the South Fukang fault. It is not in the urban area of Urumqi city. The other three faults are located in the urban area and were active in the late Pleistocene. In these cases, this section of the nappe structure near the city has an earthquake risk of M6.5-7, An earthquake Ms6.6, 60 km east to Urumqi city occurred along the structure in 1965.

Numerical Prediction and Analysis of Hydraulic Characteristics of Waterfall Scene for Application to Design Control

The hydraulic characteristics of artificial waterfalls constitute an important research area for both academia and industry.As yet,the hydraulic parameters used in the hydraulic design of landscape waterfalls are not well understood for use in qualitative and quantitative analyses.Due to their complicated shapes and appearances,it remains a challenging problem to design or simulate realistic waterfall scenes.In this paper,we present a hybrid model and an efficient numerical method for simulating the hydraulic characteristics of waterfalls and investigate the critical flow in waterfall design and the adherent flow phenomenon.We fit empirical equations to predict the size and shape of different waterfall flow patterns to provide a basis for the design and construction of waterscapes in the real world.We then apply our work to an artificial waterfall in Kraal Jiang River and the results demonstrate that our model achieves desirable control qualities and good agreement in a real-world application.

The Arcuate Nappe Structure on the Northern Margin of the Wuliang Moutnains in Western Yunnan

The arcuate nappe structure on the north edge of the Wuliang Mountains in westernYunnan Province is a complex nappe structural system with multiple superimposed structures.The autochthonous system is a WNW-trending arcuate fold belt consisting of the Jurassic andCretaceous and the allochthonous system is mainly composed of Upper Triassic rocks. Generally,the nappe structure moved from south to north, with the hanging wall thrusting in a WNW direc-tion for a distance of over 10km. The deep nappe structural system was formed at depths ofabout 5-10km in an environment not exceeding the greenschist facies. It occurred in theOligocene (about 40-20 Ma).

Tectonometamorphic Cycles in Different Geodynamic Conditions

Formation and attenuation of crust thermal anomalies, accompanied by development of geological structures, are governed by special laws, together with metamorphism and other endogenic process, form tectonometamorphic cycle (TMC). Because of rock rheology under metamorphic conditions, the structures, concurring with metamorphism, reflect geodynamic conditions much more perfect than those of the structures of nonmetamorphosed rocks. For this reason, structural investigations open wide, sometimes unique, possibilities for geodynamic research into regional metamorphosed terrains. The TMC features under different geodynamic conditions are shown with examples of California (subduction), Himalaya and Junggar Alatau (collision), and Northwest environs of the White Sea (polycyclic development). The analysis of these units serves as basis of some general conclusions. TMC, the steady pattern of crust thermal anomalies manifestation, does not practically depend on peculiarities of metamorphism. At lower and middle crust levels, occur the high-temperature complete cycles that include following two stages. The first is represented by nappes and paragenes of parallel bedding flow, the second, by linear folds, domes and faults. At top levels of fold complexes display the low-temperature reduced cycles, expressed only by structures of the second stage. There are gradual transitions between the complete and reduced cycles. Thermal anomalies in the first stage of complete cycles devolop against the background of large horizontal displacements at contacts between interacting plates or are genetically connected with their gently sloping fault planes. Of all structural elements of the cycles, in compressional environments (nappes, linear folds, domes etc.), only the structures of the first stage of complete cycles can be considered as indications of plate tectonics. Presence of such structures at the most ancient supracrustal complexes point to existence of plate tectonics already at the early stages of geological development of the earth.

Zircon age depth-profiling sheds light on the early Caledonian evolution of the Seve Nappe Complex in west-central J?mtland

The Scandinavian Caledonides comprise nappe stacks of far-travelled allochthons that record closure of the Iapetus Ocean and subsequent continental collision of Baltica and Laurentia.The Seve Nappe Complex(SNC)of the Scandinavian Caledonides includes relics of the outermost Baltoscandian passive margin that were subducted to mantle depths.The earliest of the deep subduction events has been dated to ca.500-480 Ma.Evidence of this event has been reported from the northern exposures of the SNC.Farther south in the central and southern segments of the SNC,(ultra)high-pressure rocks have yielded younger ages in the range of ca.470-440 Ma.This study provides the first record of the early Caledonian event in the southern SNC.The evidence has been obtained by depth profiling of zircon grains that were extracted from the Tv?r?klumparna microdiamond-bearing gneiss.These zircon grains preserve eclogite facies overgrowths that crystallized at 482.6±3.8 Ma.A second,chemically-distinct zircon overgrowth records granulite facies metamorphism at 439.3±3.6 Ma,which corroborates previous geochronological evidence for granulite facies metamorphism at this time.Based on these results,we propose that the entire outer margin of Baltica was subducted in the late Cambrian to early Ordovician,but the record of this event may be almost entirely eradicated in the vast majority of lithologies by pervasive late Ordovician to early Silurian metamorphism.

Characteristics and geological significance of germanium in Taiyuan coal formation of Huainan Coalfield,Anhui,China

HN-1#is the first fully working coring well of the Taiyuan Formation(Ty)in the Huinan Coalfield and exploration studies are currently underway on the associated resources of the coal-bearing strata.The HN-1#well is located in the Fufeng thrust nappe structural belt in the south of the Huainan Coalfield.Three coal samples from the Ty were collected from HN-1#and inductively-coupled plasma mass spectrometry and inductively-coupled plasma atomic emission spectrometry were used to determine the Ge content of each sample.Based on proximate and ultimate analyses,microscopy data,and analyses of the ash products,some important findings were made.The Ty coal samples had a relatively high total sulfur(Sud)content(4.24%),thus the coal was considered to be a lower ranked coal(high volatility bituminous coal),which also had a low coal ash composition index(k,1.87).Collodetrinite was the main submaceral of the Ty coal.Small amounts of pyrite particles were found in the coal seams of the Ty,while the contents of pyrite and algae in the top and bottom sections of the coal seam were relatively high,which meant that the swampy peat conditions which existed during the formation of the coal seams were affected by seawater;also the degree of mineralization of the coal seam was relatively high,which is consistent with reducing conditions in a coastal environment setting.Atomic force microscopy(AFM)experiments showed that the modes of occurrence of Ge in the Ty coal were mainly those for organic-bound and adsorbed Ge species.The organic carbon isotope values for the Ty coal ranged from-24.1‰to-23.8‰,with an average value of-24.0‰,which is equivalent to the value for terrestrial plants(average value-24.0‰).The Ge content of the Ty coal was 13.57 mg/kg.The Ge content was negatively correlated with volatile matter and the ash yield.

Geophysics Contribution for the Determination of Aquifers with a Case Study

The determination and monitoring of aquifer formations on the eastern border of Moroccan Gharb basin are very difficult because of their spatial and temporal variation. To delimit these formations, a geophysical survey of 52 geoelectric soundings was performed with a mesh of 500 m and electrodes distance between 1000 m and 3000 m. Geoelectric sections and resistivity maps show a horst and graben structure. The correlation of existing oil drillings shows that the Jurassic and Neogene formations are both affected by normal faults causing Jurassic deposits collapse with local thickening of the Miocene deposits, and reverse faults delimiting tectonic slices due to tension caused by prerifaine nappe advance. This fact confirms the generated structure by the resistivity method. The isobath map of resistant formations's roof show average depths extending from 400 to 800 m for calcareous sandstone that are potential aquifers while oil drillings indicate over 1000 m depths.

TRANSPRESSIVE DEFORMATION OF THE LONGXINGGOU NAPPE AND ITS SIGNIFICANCE,SOUTH OF TONGBAI MOUNTAINS, CENTRAL CHINA

The Longxinggou Nappe which is located in Guangshui county, north of Hubei province, has been first identified by our detail mapping. It is composed of lowgrade metamorphosed rocks of middle Proterozoic Shuixian group, late Proterozoic Yaolinghe group, Sinian Liantuo,Doushantuo and Dengying formations. It is quite different from the lower beds, middle.Proterozoic Hong’an epidote-amphibole facies metamorphose metapelite and metagranite. They are different not only in composition, metamorphic degree, but also in deformation forms. The Longxinggou nappe has characteristics both of ductile thrusting and ductile dextral strike-sliping, illustrating a transpressive deformation regime of middle crustal in the orogenic belt due to the oblique collision, between the Shuiying terrain and the Tongbai terrain during Caledonian period.

Experimental Investigation of Discharge Capacity of Labyrinth Weirs with and without Nappe Breakers

Labyrinth weirs provide higher discharge capacity than conventional weirs, with the ability to pass large flows at comparatively low heads. Labyrinth weirs are primarily used as spillways for dams where the spillway width is restricted. In recent years, many research investigations have considered the hydraulic performance of labyrinth weirs, particularly as dependent on the geometric features. The previous work has improved the design basis for such weirs. However, their design still requires experimentally derived and generalized performance curves. It is especially important to observe the behavior of the weir nappe to ensure the design provides hydraulic optimization and to account for pressure fluctuations, possible vibrations, resonance effect, noise and flow surging. In the present study, discharge coefficients were experimentally determined for both circular labyrinth weirs and sharp crested trapezoidal labyrinth weirs of varying side wall angle (α). Additional studies were completed with nappe breakers included to reduce the impact of vibration on the labyrinth weirs. In general, the test data indicated that nappe breakers placed on the trapezoidal labyrinth weirs and circular labyrinth weirs reduced the discharge coefficient by up to 4% of the un-amended weir.

中空预应力(PC)钢筋锚固法的研究与开发

无台座先张预应力法(NAPP法)引入预应力时无须重型设备和较大作业空间,是一种可用于现有混凝土结构物进行部分引入预加应力的施工方法。介绍了NAPP组合件锚固法最初开发的标准型研讨结果和施工实例以及小直径型的试验研究结果的有关报告。与标准性相比,小直径型减小了钻孔直径,有实用价值,用途较广。但与相同性能的标准性相比,小直径型的钻孔长度较长,为此应根据构件和条件分开使用标准型或小直径型的组合件。