Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is cap...Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is captured with high-speed photography.Postmortem samples are characterized with optical imaging,three-dimensional laser scanning,microhardness testing and electron backscatter diffraction.With increasing number of impacts,crater diameter increases slightly,but crater depth and crater volume increase significantly,and strain accumulation leads to microhardness increase overall.Crater parameters all follow power-law relations with the number of impacts.Twin-like deformation bands and macroscopic deformation twins are produced by impact as a result of spontaneous dislocation self-pinning under high strain rate,large shear deformation.Under multiple impacts,shear strain accumulation in the arc-shaped region of the crater induces deformation twinning when it exceeds a critical value(~1.1-1.6).It is highly possible that the deformation twins are related to deformation bands,since they both share one set of the{111}pole with the initial matrix grain.A finite element method model is optimized to reproduce experimental observations and interpret deformation mechanisms.展开更多
The Nb-16Si-18Ti-xB(at%,similarly hereinafter,x=0,1,2,3)alloys were prepared by arc melting in a water-cooled copper crucible.The influences of B addition on their microstructures and properties were based on the data...The Nb-16Si-18Ti-xB(at%,similarly hereinafter,x=0,1,2,3)alloys were prepared by arc melting in a water-cooled copper crucible.The influences of B addition on their microstructures and properties were based on the data of X-ray diffraction(XRD),field emission scanning electron microscopy(FESEM),and electronic universal material testing machine.It is found that the addition of B promotes the formation ofα-Nb5Si3phase and suppresses the formation of Nb3Si phase.B addition also tends Nb-16Si-18Ti alloy to form the hypereutectic structures.The content of silicide phases shows a trend of firstly decreasing and then increasing in Nb-16Si-18Ti-xB(x=0,1,2,3)alloys.The size of Nb solid solution(Nbss)phase increases in Nb-16Si-18Ti-xB(x=0,1,2,3)alloys after heat treatment at 1523 K for 10 h.The room temperature compression strength of Nb-16Si-18Ti alloy increases firstly and then decreases with B addition.The high-temperature compression strength of Nb-16Si-18Ti alloy decreases firstly and then increases with B addition.It is found that the volume and size of silicide phases have a synergistic effect on the compression strength of Nb-TiSi-based alloys.展开更多
基金supported by the Scientific Challenge Project of China(Grant No.TZ2018001)the National Natural Science Foundation of China(Grant Nos.11627901,11802252)the Science and Technology Program of Sichuan Province(Grant No.2020YFG0415)。
文摘Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is captured with high-speed photography.Postmortem samples are characterized with optical imaging,three-dimensional laser scanning,microhardness testing and electron backscatter diffraction.With increasing number of impacts,crater diameter increases slightly,but crater depth and crater volume increase significantly,and strain accumulation leads to microhardness increase overall.Crater parameters all follow power-law relations with the number of impacts.Twin-like deformation bands and macroscopic deformation twins are produced by impact as a result of spontaneous dislocation self-pinning under high strain rate,large shear deformation.Under multiple impacts,shear strain accumulation in the arc-shaped region of the crater induces deformation twinning when it exceeds a critical value(~1.1-1.6).It is highly possible that the deformation twins are related to deformation bands,since they both share one set of the{111}pole with the initial matrix grain.A finite element method model is optimized to reproduce experimental observations and interpret deformation mechanisms.
基金financially supported by the National Natural Science Foundation of China(Nos.51425402,51405458,51371066 and 51671073)the National Key Research and Development Program of China(No.2016YFB0301201)the Youth Science Foundation of Heilongjiang Province(No.QC2013C049)。
文摘The Nb-16Si-18Ti-xB(at%,similarly hereinafter,x=0,1,2,3)alloys were prepared by arc melting in a water-cooled copper crucible.The influences of B addition on their microstructures and properties were based on the data of X-ray diffraction(XRD),field emission scanning electron microscopy(FESEM),and electronic universal material testing machine.It is found that the addition of B promotes the formation ofα-Nb5Si3phase and suppresses the formation of Nb3Si phase.B addition also tends Nb-16Si-18Ti alloy to form the hypereutectic structures.The content of silicide phases shows a trend of firstly decreasing and then increasing in Nb-16Si-18Ti-xB(x=0,1,2,3)alloys.The size of Nb solid solution(Nbss)phase increases in Nb-16Si-18Ti-xB(x=0,1,2,3)alloys after heat treatment at 1523 K for 10 h.The room temperature compression strength of Nb-16Si-18Ti alloy increases firstly and then decreases with B addition.The high-temperature compression strength of Nb-16Si-18Ti alloy decreases firstly and then increases with B addition.It is found that the volume and size of silicide phases have a synergistic effect on the compression strength of Nb-TiSi-based alloys.
