We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite cera...We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite ceramic Nd：YAG crystal is numerically analyzed and compared with that of conventional Nd：YAG crystal. By using a composite ceramic Nd：YAG rod and a type-II high gray track resistance KTP （HGTR-KTP） crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd：YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.展开更多
An efficient dual-wavelength laser-diode-pumped Nd:YAG ceramic laser operating at 1112 and 1116 nm is demonstrated.We obtain a maximum total output power of 3.43 W including a 1.77 W 1112 nm component and a 1.66 W 111...An efficient dual-wavelength laser-diode-pumped Nd:YAG ceramic laser operating at 1112 and 1116 nm is demonstrated.We obtain a maximum total output power of 3.43 W including a 1.77 W 1112 nm component and a 1.66 W 1116 nm component under a pump power of 16.1 W,corresponding to a slope efficiency of 23.7%and a total optical-to-optical efficiency of 21.3%.展开更多
We experimentally demonstrated a diode-pumped Kerr-lens mode-locked femtosecond laser based on an Yb：YAG ceramic. Stable laser pulses with 97-fs duration, 2.8-nJ pulse energy, and 320-mW average power were obtained. ...We experimentally demonstrated a diode-pumped Kerr-lens mode-locked femtosecond laser based on an Yb：YAG ceramic. Stable laser pulses with 97-fs duration, 2.8-nJ pulse energy, and 320-mW average power were obtained. The femtosecond oscillator operated at a central wavelength of 1049 nm and a repetition rate of 115 MHz. To the best of our knowledge, this is the first demonstration of a Kerr-lens mode-locked operation in a diode-pumped Yb：YAG ceramic laser with sub-100 fs pulse duration.%@ 1674-1056展开更多
（Nd0.01Y0.99）3Al5O12 nano-sized powders were synthesized by low temperature combustion （LCS）, using Nd2O3, Y2O3, Al（NO3）3.9H2O, ammonia water and citric acid as starting materials. The powders were characterized...（Nd0.01Y0.99）3Al5O12 nano-sized powders were synthesized by low temperature combustion （LCS）, using Nd2O3, Y2O3, Al（NO3）3.9H2O, ammonia water and citric acid as starting materials. The powders were characterized by TG-DTA, XRD, FT-IR, ICP and TEM, respectively. The grain sizes were calculated by the Scherrer＇s formula using the full width at half maximum （FWHM） of YAG （420） crystal plane diffraction lines. The study focused on crystallization of ceramics at different heat treatment temperatures. The experimental results show that crystallizing temperature of YAG is 850 ℃, and the intermediate crystal phase YAP, appearing during heat treatment, transforms to YAG cubic crystal phase at the temperature of 1 050℃. The particle size of the powders synthesized by LCS is nano-sized. With the temperature increasing, the mean grain sizes raise, the stand deviations keep almost at the value of 2.0 and the lattice parameters decrease. The grains mainly grow by grain boundary diffusion. The lattice parameter expansion is caused by an increase of the repulsive dipolar interactions on surfaces of crystallites,展开更多
We report the laser output of transparent Nd：YAG （Nd：Y3Al5O12） ceramics fabricated from Nd：YAG precursors through the microwave-assisted homogenous precipitation （MAHP） method. Pure phase and uniform Nd：YAG na...We report the laser output of transparent Nd：YAG （Nd：Y3Al5O12） ceramics fabricated from Nd：YAG precursors through the microwave-assisted homogenous precipitation （MAHP） method. Pure phase and uniform Nd：YAG nano-powders with average sizes less than 100 nm were obtained by heating treatment of.the Nd：YAG precursor particles aged for 6 d in vessel with humidity of 30%-50% at 25℃. Transparent Nd：YAG ceramic pellets were obtained by vacuum sintering at 1730℃ for 10 h. Laser output （305 roW） with a slope efficiency of 5.1% was realized through an end-pumped configuration. Our results indicate that the MAHP method could potentially be used for the fabrication of laser ceramic products,展开更多
A diode-pumped actively Q-switched Raman laser is demonstrated, with YV04 employed as Raman active medium, based on a ceramic Nd：YAG laser operating at 1444nm. The first-stokes Raman generation at 1657nm is achieved....A diode-pumped actively Q-switched Raman laser is demonstrated, with YV04 employed as Raman active medium, based on a ceramic Nd：YAG laser operating at 1444nm. The first-stokes Raman generation at 1657nm is achieved. A maximum output power of as high as 612mW is obtained under a pump power of 20. 7 W and at a pulse repetition frequency rate of 20kHz, corresponding to an optical-to-optical conversion efficiency of 3%.展开更多
This paper investigates the scattering effect of domestic 0.5 at% ceramic Nd：YAG. An effective method has been utilized to measure the scattering and absorption coefficients. An end-pumped continuous wave （CW） Nd：...This paper investigates the scattering effect of domestic 0.5 at% ceramic Nd：YAG. An effective method has been utilized to measure the scattering and absorption coefficients. An end-pumped continuous wave （CW） Nd：YAG ceramic laser was also demonstrated. A maximum output power of 6.7 W at 1064 nm was obtained at an 808-nm pump power of 32.9 W. Conversion efficiency and slope efficiency have been achieved. This indicates that scattering has an important effect on the optical performance of ceramic Nd：YAG.展开更多
Polycrystalline nano-sized neodymium doped yttrium aluminum garnet (Nd∶Y3Al5O12, Nd∶YAG) powders were synthesized via a gel combustion method using nitrates and citric acid as starting materials. The evolution of ph...Polycrystalline nano-sized neodymium doped yttrium aluminum garnet (Nd∶Y3Al5O12, Nd∶YAG) powders were synthesized via a gel combustion method using nitrates and citric acid as starting materials. The evolution of phase composition and micro-structure of the powders were characterized by X-ray powder diffraction, thermogravimetry/differential thermal analysis and scanning electron microscopy. Well-crystallized Nd∶YAG nano-sized powders could be obtained at 950 ℃ for 2 h. The resultant powders are well dispersed, have a relatively narrow size distribution with an average particle size of approximately 50 nm, and show excellent sinterability. These powders can be densified to 99.2% of the theoretical density by HP sintering at 1700 ℃ for 3 h under 20 MPa nitrogen pressure.展开更多
We present a high-power Ho：YAG ceramic laser pumped at 1908nm. Using a dual-end-pumped structure, the maximum continuous-wave output power of 48 W is obtained, corresponding to a slope efficiency of 70.4% with respec...We present a high-power Ho：YAG ceramic laser pumped at 1908nm. Using a dual-end-pumped structure, the maximum continuous-wave output power of 48 W is obtained, corresponding to a slope efficiency of 70.4% with respect to the absorbed pump power. At actively Q-switched mode, the maximum average output power of 46 W and the minimum pulse width of 21 ns are achieved at a pulse repetition frequency of 20 kHz, corresponding to a peak power of approximately 109.5kW. In addition, the beam-quality M2 factor is found to be 1.4 at the maximum output power.展开更多
A diode-side-pumped Nd:YAG ceramic slab laser with a high power output is presented.An average power of 526 W is achieved at 1064 nm with a repetition rate of 120 Hz and a pulse width of 180µs from a 93mm×52...A diode-side-pumped Nd:YAG ceramic slab laser with a high power output is presented.An average power of 526 W is achieved at 1064 nm with a repetition rate of 120 Hz and a pulse width of 180µs from a 93mm×52mm×8mm ceramic slab at a pump power of 1928 W,corresponding to an optical-to-optical efficiency of 27.3%.展开更多
YAG (Y_(3)Al_(5)O_(12)) transparent ceramics have attractive application prospects for transparent armor protection modules because of their excellent light transmittance and anti-ballistic capability. Understanding t...YAG (Y_(3)Al_(5)O_(12)) transparent ceramics have attractive application prospects for transparent armor protection modules because of their excellent light transmittance and anti-ballistic capability. Understanding the fracture behavior and damage mechanism of YAG is necessary for armor design. To explore the damage characteristics of YAG under compression and tension, shock compression and shockless spalling experiments with soft recovery technique are conducted. The spall strength of YAG is obtained and the recovered samples are observed by CT and SEM. It is shown that the macroscopic damage characteristic of YAG under compression is vertical split cracks with oblique fine cracks distributed in the entire sample, while that under tension is horizontal transgranular cracks concentrated near the main spall surface. The cracks generated by macroscopic compression, tension and shear stress extend in similar tensile form at the microscale. The proportion of transgranular fractures on spall surfaces is higher than that of cracks induced by macroscopic compression. Meanwhile, higher loading rate and longer loading duration increase the transgranular fracture percentage.展开更多
Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, a...Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, and their different and potential applications are also analysed. The absorption cross-section and the emission cross-section of these ceramics are measured and calculated. The essential properties of these materials especially for the rep-rated pulsed high-energy diode-pumped solid-state lasers are investigated. The results show that Yb doped YAG, YSAG and YaLaO3 are all suitable materials used for diode-pumped solid-state lasers.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61107086, 61172010, and 61101058)the Science and Technology Committee of Tianjin, China (Grant No. 11JCYBJC01100)the National High Technology Research and Development Program of China (Grant No. 2011AA010205)
文摘We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite ceramic Nd：YAG crystal is numerically analyzed and compared with that of conventional Nd：YAG crystal. By using a composite ceramic Nd：YAG rod and a type-II high gray track resistance KTP （HGTR-KTP） crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd：YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.
基金Supported by the Fund of Key Laboratory of Crystal Material of Shandong University under Grant No KF1101the Fund of Shandong University under Grant No 11170072613176.
文摘An efficient dual-wavelength laser-diode-pumped Nd:YAG ceramic laser operating at 1112 and 1116 nm is demonstrated.We obtain a maximum total output power of 3.43 W including a 1.77 W 1112 nm component and a 1.66 W 1116 nm component under a pump power of 16.1 W,corresponding to a slope efficiency of 23.7%and a total optical-to-optical efficiency of 21.3%.
基金Project supported by the National Major Scientific Instrument Development Project of China(Grant No.2012YQ120047)the National Natural Science Foundation of China(Grant No.61205130)the Fundamental Research Funds for the Central Universities,China(Grant No.JB140502)
文摘We experimentally demonstrated a diode-pumped Kerr-lens mode-locked femtosecond laser based on an Yb：YAG ceramic. Stable laser pulses with 97-fs duration, 2.8-nJ pulse energy, and 320-mW average power were obtained. The femtosecond oscillator operated at a central wavelength of 1049 nm and a repetition rate of 115 MHz. To the best of our knowledge, this is the first demonstration of a Kerr-lens mode-locked operation in a diode-pumped Yb：YAG ceramic laser with sub-100 fs pulse duration.%@ 1674-1056
基金the Chinese Education Ministry Excellent Teacher Foundation(KB20026)
文摘（Nd0.01Y0.99）3Al5O12 nano-sized powders were synthesized by low temperature combustion （LCS）, using Nd2O3, Y2O3, Al（NO3）3.9H2O, ammonia water and citric acid as starting materials. The powders were characterized by TG-DTA, XRD, FT-IR, ICP and TEM, respectively. The grain sizes were calculated by the Scherrer＇s formula using the full width at half maximum （FWHM） of YAG （420） crystal plane diffraction lines. The study focused on crystallization of ceramics at different heat treatment temperatures. The experimental results show that crystallizing temperature of YAG is 850 ℃, and the intermediate crystal phase YAP, appearing during heat treatment, transforms to YAG cubic crystal phase at the temperature of 1 050℃. The particle size of the powders synthesized by LCS is nano-sized. With the temperature increasing, the mean grain sizes raise, the stand deviations keep almost at the value of 2.0 and the lattice parameters decrease. The grains mainly grow by grain boundary diffusion. The lattice parameter expansion is caused by an increase of the repulsive dipolar interactions on surfaces of crystallites,
基金financially supported by the National Natural Science Foundation of China (No.50702031,60974117,50990303,and 50872070)the Excellent Young Investigators Award Foundation of Shandong Province (No.BS2009CL021)the Major State Basic Research Development Program of China (Nos.2009CB93050 and G2004CB619002)
文摘We report the laser output of transparent Nd：YAG （Nd：Y3Al5O12） ceramics fabricated from Nd：YAG precursors through the microwave-assisted homogenous precipitation （MAHP） method. Pure phase and uniform Nd：YAG nano-powders with average sizes less than 100 nm were obtained by heating treatment of.the Nd：YAG precursor particles aged for 6 d in vessel with humidity of 30%-50% at 25℃. Transparent Nd：YAG ceramic pellets were obtained by vacuum sintering at 1730℃ for 10 h. Laser output （305 roW） with a slope efficiency of 5.1% was realized through an end-pumped configuration. Our results indicate that the MAHP method could potentially be used for the fabrication of laser ceramic products,
基金Supported by the Foundation of the State Key Laboratory of Crystal Material of Shandong University under Grant No KF1101the Foundation of Shandong University under Grant No 1170072613176+2 种基金the National Natural Science Foundation of China under Grant Nos 11004122 and 11204160the Special Grade of China Postdoctoral Science Foundation under Grant No 201104627the Independent Innovation Foundation of Shandong University under Grant No 2011GN058
文摘A diode-pumped actively Q-switched Raman laser is demonstrated, with YV04 employed as Raman active medium, based on a ceramic Nd：YAG laser operating at 1444nm. The first-stokes Raman generation at 1657nm is achieved. A maximum output power of as high as 612mW is obtained under a pump power of 20. 7 W and at a pulse repetition frequency rate of 20kHz, corresponding to an optical-to-optical conversion efficiency of 3%.
基金Project supported by the National High Technology Research and Development Program of China (Grant No.2004CB619006)the National Natural Science Foundation of China (Grant Nos.60578030 and 50590404)
文摘This paper investigates the scattering effect of domestic 0.5 at% ceramic Nd：YAG. An effective method has been utilized to measure the scattering and absorption coefficients. An end-pumped continuous wave （CW） Nd：YAG ceramic laser was also demonstrated. A maximum output power of 6.7 W at 1064 nm was obtained at an 808-nm pump power of 32.9 W. Conversion efficiency and slope efficiency have been achieved. This indicates that scattering has an important effect on the optical performance of ceramic Nd：YAG.
文摘Polycrystalline nano-sized neodymium doped yttrium aluminum garnet (Nd∶Y3Al5O12, Nd∶YAG) powders were synthesized via a gel combustion method using nitrates and citric acid as starting materials. The evolution of phase composition and micro-structure of the powders were characterized by X-ray powder diffraction, thermogravimetry/differential thermal analysis and scanning electron microscopy. Well-crystallized Nd∶YAG nano-sized powders could be obtained at 950 ℃ for 2 h. The resultant powders are well dispersed, have a relatively narrow size distribution with an average particle size of approximately 50 nm, and show excellent sinterability. These powders can be densified to 99.2% of the theoretical density by HP sintering at 1700 ℃ for 3 h under 20 MPa nitrogen pressure.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61308009,61405047 and 50990301the China Postdoctoral Science Foundation Funded Project under Grant No 2015T80339+1 种基金the Fundamental Research Funds for the Central Universities under Grant No HIT.NSRIF.2015042the Science Fund for Outstanding Youths of Heilongjiang Province under Grant No JQ201310
文摘We present a high-power Ho：YAG ceramic laser pumped at 1908nm. Using a dual-end-pumped structure, the maximum continuous-wave output power of 48 W is obtained, corresponding to a slope efficiency of 70.4% with respect to the absorbed pump power. At actively Q-switched mode, the maximum average output power of 46 W and the minimum pulse width of 21 ns are achieved at a pulse repetition frequency of 20 kHz, corresponding to a peak power of approximately 109.5kW. In addition, the beam-quality M2 factor is found to be 1.4 at the maximum output power.
基金by the Major Program of the National Natural Science Foundation of China under Grant No 50990304the Natural Science Foundation of Shanghai under Grant No 09ZR1435600.
文摘A diode-side-pumped Nd:YAG ceramic slab laser with a high power output is presented.An average power of 526 W is achieved at 1064 nm with a repetition rate of 120 Hz and a pulse width of 180µs from a 93mm×52mm×8mm ceramic slab at a pump power of 1928 W,corresponding to an optical-to-optical efficiency of 27.3%.
基金This work is funded by the National Natural Science Foundation of China(No.11772159)the NSAF Joint Fund(No.U1730101)the Fundamental Research Funds for the Central Universities(No.30917011104).
文摘YAG (Y_(3)Al_(5)O_(12)) transparent ceramics have attractive application prospects for transparent armor protection modules because of their excellent light transmittance and anti-ballistic capability. Understanding the fracture behavior and damage mechanism of YAG is necessary for armor design. To explore the damage characteristics of YAG under compression and tension, shock compression and shockless spalling experiments with soft recovery technique are conducted. The spall strength of YAG is obtained and the recovered samples are observed by CT and SEM. It is shown that the macroscopic damage characteristic of YAG under compression is vertical split cracks with oblique fine cracks distributed in the entire sample, while that under tension is horizontal transgranular cracks concentrated near the main spall surface. The cracks generated by macroscopic compression, tension and shear stress extend in similar tensile form at the microscale. The proportion of transgranular fractures on spall surfaces is higher than that of cracks induced by macroscopic compression. Meanwhile, higher loading rate and longer loading duration increase the transgranular fracture percentage.
基金supported by National Science Foundation for Post-doctoral Scientists of China (Grant No 20070420677)Applied Basic Research Program of Sciences and Technology Commission Foundation of Shanghai,China (Grant No 06DZ11417)High Technology Research and Development Program of China (Grant No 2007AA03Z523)
文摘Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, and their different and potential applications are also analysed. The absorption cross-section and the emission cross-section of these ceramics are measured and calculated. The essential properties of these materials especially for the rep-rated pulsed high-energy diode-pumped solid-state lasers are investigated. The results show that Yb doped YAG, YSAG and YaLaO3 are all suitable materials used for diode-pumped solid-state lasers.
