Pulse echo accumulation is commonly employed in coherent Doppler wind LiDAR(light detection and ranging)under the assumption of steady wind.Here,the measured spectral data are analyzed in the time dimension and freque...Pulse echo accumulation is commonly employed in coherent Doppler wind LiDAR(light detection and ranging)under the assumption of steady wind.Here,the measured spectral data are analyzed in the time dimension and frequency dimension to cope with the temporal wind shear and achieve the optimal accumulation time.A hardware-efficient algorithm combining the interpolation and cross-correlation is used to enhance the wind retrieval accuracy by reducing the frequency sampling interval and then reduce the spectral width calculation error.Moreover,the temporal broadening effect and spatial broadening effect are decoupled according to the strategy we developed.展开更多
The optimal selection method of spectral region based on the grey correlation analysis was applied in the analysis of near-infrared(NIR) spectra. In order to compute "characteristic" spectral region, 160 samples o...The optimal selection method of spectral region based on the grey correlation analysis was applied in the analysis of near-infrared(NIR) spectra. In order to compute "characteristic" spectral region, 160 samples of tobacco were surveyed by NIR. Next, the whole spectral region was randomly divided into six regions, and the values of association coefficients and correlation orders of different regions were computed for total sugar, reducing sugar and nicotine. Moreover, two regions that owned the largest value of association coefficient were regarded as "characteristic" spectral region of a model. Finally, the quantitative analysis models of different components were established via the partial least squares method, and the common selection methods of spectral region were compared. The simulation results indicate that the models to choose the spectral region based on grey correlation analysis are more effective than the common selection methods of spectral region, the optimized time of algorithm is shorter, the prediction precision of the models is higher and generalization ability for quantitative analysis results is stronger. This research can provide the support for the quantitative analysis models of NIR spectra and new idea for commercial analysis software of NIR. So, it has a high application value in the analysis of NIR spectra.展开更多
Near-infrared (NIR) spectroscopy combined with chemometrics methods was applied to the rapid and reagent-free analysis of serum urea nitrogen (SUN). The mul-partitions modeling was performed to achieve parameter stabi...Near-infrared (NIR) spectroscopy combined with chemometrics methods was applied to the rapid and reagent-free analysis of serum urea nitrogen (SUN). The mul-partitions modeling was performed to achieve parameter stability. A large-scale parameter cyclic and global optimization platform for Norris derivative filter (NDF) of three parameters (the derivative order: d, the number of smoothing points: s and the number of differential gaps: g) was developed with PLS regression. Meantime, the parameters’ adaptive analysis of NDF algorithm was also given, and achieved a significantly better modeling effect than one without spectral pre-processing. After eliminating the interference wavebands of saturated absorption, the modeling performance was further improved. In validation, the root mean square error (SEP), correlation coefficient (RP) for prediction and the ratio of performance to deviation (RPD) were 1.66 mmol?L-1, 0.966 and 4.7, respectively. The results showed that the high-precision analysis of SUN was feasibility based on NIR spectroscopy and Norris-PLS. The global optimization method of NDF is also expected to be applied to other analysis objects.展开更多
The identification of liquor brands is very important for food safety. Most of the fake liquors are usually made into the products with the same flavor and alcohol content as regular brand, so the identification for t...The identification of liquor brands is very important for food safety. Most of the fake liquors are usually made into the products with the same flavor and alcohol content as regular brand, so the identification for the liquor brands with the same flavor and the same alcohol content is essential. However, it is also difficult because the components of such liquor samples are very similar. Near-infrared (NIR) spectroscopy combined with partial least squares discriminant analysis (PLS-DA) was applied to identification of liquor brands with the same flavor and alcohol content. A total of 160 samples of Luzhou Laojiao liquor and 200 samples of non-Luzhou Laojiao liquor with the same flavor and alcohol content were used for identification. Samples of each type were randomly divided into the modeling and validation sets. The modeling samples were further divided into calibration and prediction sets using the Kennard-Stone algorithm to achieve uniformity and representativeness. In the modeling and validation processes based on PLS-DA method, the recognition rates of samples achieved 99.1% and 98.7%, respectively. The results show high prediction performance for the identification of liquor brands, and were obviously better than those obtained from the principal component linear discriminant analysis method. NIR spectroscopy combined with the PLS-DA method provides a quick and effective means of the discriminant analysis of liquor brands, and is also a promising tool for large-scale inspection of liquor food safety.展开更多
Partial least squares discriminant analysis (PLS-DA) with integrated moving-window (MW) waveband screening was applied to the discriminant analysis of liquor brands with near-infrared (NIR) spectroscopy. Luzhou Laojia...Partial least squares discriminant analysis (PLS-DA) with integrated moving-window (MW) waveband screening was applied to the discriminant analysis of liquor brands with near-infrared (NIR) spectroscopy. Luzhou Laojiao, a popular liquor with strong fragrant flavor, was used as the identified liquor brand (160 samples, negative, 52 vol alcoholicity). Liquors of 10 other brands with strong fragrant flavor were used as the interferential brands (200 samples, positive, 52 vol alcoholicity). The Kennard-Stone algorithm was used for the division of modeling samples to achieve uniformity and representativeness. Based on the MW-PLS-DA, a simplified optimal model set with 157 wavebands was further proposed. This set contained five types of wavebands corresponding to the NIR absorption bands of water, ethanol, and other micronutrients (i.e., acids, aldehydes, phenols, and aromatic compounds) in liquor for practical choice. Using five selected simple models with 4775 - 4239, 7804 - 6569, 6264 - 5844, 9435 - 7896, and 12066 - 10373 cm-1, the validation recognition rates were obtained as 99.3% or higher. Results show good prediction performance and low model complexity, and also provided a valuable reference for designing small dedicated instruments. The proposed method is a promising tool for large-scale inspection of liquor food safety.展开更多
A rapid quantitative analytical method for three components of Lonicerae Japornicae Flos solution(Lonicera Japonica Thumb.)extracted by water was developed using near-infrared(NIR)spectroscopy and the partial least-sq...A rapid quantitative analytical method for three components of Lonicerae Japornicae Flos solution(Lonicera Japonica Thumb.)extracted by water was developed using near-infrared(NIR)spectroscopy and the partial least-squares(PLS)method.The NIR spectra of 81 samples collected from a production line were obtained.The concentrations of secologanic acid,chlorogenicacid and galuteolin were detemmined by using high-performance liquid chromatography-diodearray detection as the reference method.Several pretreatment methods for the NIR spectra wereusedi during PLS calibration.The most appropriate latent variable number of the PLS factor wasselected based on the standard error of cross-validation(SECV).The performance of the finalPLS models was evaluated according to SECV,standard error of predliction(SEP)and deter-mination coeficient(R^(2)).The compounds secologanic acid,chlorogenic acid and galuteolin hadSEP values of 0.030,0.061 and 1.668μg/mL,respectively and R^(2) values over 0.85.This workshows that NIR spectroscopy is a rapid and convenient method for the analysis of LoniceraeJaponicae Flos solution extracted by water.The proposed method can help in the application ofprocs analytical technology in the pha maceutical industry,particularly in tra ditional Chinesemedicine injections.展开更多
Using visible and near-infrared (Vis-NIR) spectroscopy combined with partial least squares (PLS) regression, the rapid reagent-free analysis model for chromium (Cr) content in tideland reclamation soil in the Pearl Ri...Using visible and near-infrared (Vis-NIR) spectroscopy combined with partial least squares (PLS) regression, the rapid reagent-free analysis model for chromium (Cr) content in tideland reclamation soil in the Pearl River Delta, China was established. Based on Savitzky-Golay (SG) smoothing and PLS regression, a multi-parameters optimization platform (SG-PLS) covering 264 modes was constructed to select the appropriately spectral preprocessing mode. The optimal SG-PLS model was determined according to the prediction effect. The selected optimal parameters <em>d, p, m</em> and LV were 2, 6, 23 and 8, respectively. Using the validation samples that were not involved in modeling, the root mean square error (SEP<sub>V</sub>), relative root mean square error (R-SEP<sub>V</sub>) and correlation coefficients (R<sub>P, V</sub>) of prediction were 11.66 mg<span style="white-space:nowrap;">·</span>kg<sup>-1</sup>, 10.7% and 0.722, respectively. The results indicated that the feasibility of using Vis-NIR spectroscopy combined with SG-PLS method to analyze soil Cr content. The constructed multi-parameters optimization platform with SG-PLS is expected to be applied to a wider field of analysis. The rapid detection method has important application values to large-scale agricultural production.展开更多
Near-infrared (NIR) spectroscopy was applied to reagent-free quantitative analysis of polysaccharide of a brand product of proprietary Chinese medicine (PCM) oral solution samples. A novel method, called absorbance up...Near-infrared (NIR) spectroscopy was applied to reagent-free quantitative analysis of polysaccharide of a brand product of proprietary Chinese medicine (PCM) oral solution samples. A novel method, called absorbance upper optimization partial least squares (AUO-PLS), was proposed and successfully applied to the wavelength selection. Based on varied partitioning of the calibration and prediction sample sets, the parameter optimization was performed to achieve stability. On the basis of the AUO-PLS method, the selected upper bound of appropriate absorbance was 1.53 and the corresponding wavebands combination was 400 - 1880 & 2088 - 2346 nm. With the use of random validation samples excluded from the modeling process, the root-mean-square error and correlation coefficient of prediction for polysaccharide were 27.09 mg·L<sup>-</sup><sup>1</sup> and 0.888, respectively. The results indicate that the NIR prediction values are close to those of the measured values. NIR spectroscopy combined with AUO-PLS method provided a promising tool for quantification of the polysaccharide for PCM oral solution and this technique is rapid and simple when compared with conventional methods.展开更多
The identification of soy sauce adulteration can avoid fraud, and protect the rights and interests of producers and consumers. Based on two measurement models (1 mm, 10 mm), the visible and near-infrared (Vis-NIR) spe...The identification of soy sauce adulteration can avoid fraud, and protect the rights and interests of producers and consumers. Based on two measurement models (1 mm, 10 mm), the visible and near-infrared (Vis-NIR) spectroscopy combined with standard normal variate-partial least squares-discriminant analysis (SNV-PLS-DA) was used to establish the discriminant analysis models for adulterated and brewed soy sauces. Chubang soy sauce was selected as an identification brand (negative, 70). The adulteration samples (positive, 72) were prepared by mixing Chubang soy sauce and blended soy sauce with different adulteration rates. Among them, the “blended soy sauce” sample was concocted of salt water (NaCl), monosodium glutamate (C<sub>5</sub>H<sub>10</sub>NNaO<sub>5</sub>) and caramel color (C<sub>6</sub>H<sub>8</sub>O<sub>3</sub>). The rigorous calibration-prediction-validation sample design was adopted. For the case of 1 mm, five waveband models (visible, short-NIR, long-NIR, whole NIR and whole scanning regions) were established respectively;in the case of 10 mm, three waveband models (visible, short-NIR and visible-short-NIR regions) for unsaturated absorption were also established respectively. In independent validation, the models of all wavebands in the cases of 1 mm and 10 mm have achieved good discrimination effects. For the case of 1 mm, the visible model achieved the optimal validation effect, the validation recognition-accuracy rate (RAR<sub>V</sub>) was 99.6%;while in the case of 10 mm, both the visible and visible-short-NIR models achieved the optimal validation effect (RAR<sub>V</sub> = 100%). The detection method does not require reagents and is fast and simple, which is easy to promote the application. The results can provide valuable reference for designing small dedicated spectrometers with different measurement modals and different spectral regions.展开更多
Functional near-infrared spectroscopy(fNIRS)is a neuroimaging technology which is suitable for psychiatric patients.Several fNIRS studies have found abnormal brain activations during cognitive tasks in elderly depress...Functional near-infrared spectroscopy(fNIRS)is a neuroimaging technology which is suitable for psychiatric patients.Several fNIRS studies have found abnormal brain activations during cognitive tasks in elderly depression.In this paper,we proposed a discriminative model of multivariate pattern classification based on fNIRS signals to distinguish elderly depressed patients from healthy controls.This model used the brain activation patterns during a verbal fluency task as features of classification.Then Pseudo-Fisher Linear Discriminant Analysis was performed on the feature space to generate discriminative model.Using leave-one-out(LOO)cross-validation,our results showed a correct classification rate of 88%.The discriminative model showed its ability to identify people with elderly depression and suggested that fNIRS may be an efficient clinical tool for diagnosis of depression.This study may provide the first step for the development of neuroimaging biomarkers based on fNIRS in psychiatric disorders.展开更多
Near-infrared spectroscopy coupled with kernel partial least squares-discriminant analysis was used to rapidly screen water containing malathion. In the wavenumber of 4348 cm-1 to 9091 cm-1, the overall correct classi...Near-infrared spectroscopy coupled with kernel partial least squares-discriminant analysis was used to rapidly screen water containing malathion. In the wavenumber of 4348 cm-1 to 9091 cm-1, the overall correct classification rate of kernel partial least squares-discriminant analysis was 100% for training set, and 100% for test set, with the lowest concentration detected malathion residues in water being 1 μg·ml-1. Kernel partial least squares-discriminant analysis was able to have a good performance in classifying data in nonlinear systems. It was inferred that Near-infrared spectroscopy coupled with the kernel partial least squares-discriminant analysis had a potential in rapid screening other pesticide residues in water.展开更多
The spectral methods and ice-induced fatigue analysis are discussed based on Miner's linear cumulative fatigue hypothesis and S-N curve data. According to the long-term data of full-scale tests on the platforms in th...The spectral methods and ice-induced fatigue analysis are discussed based on Miner's linear cumulative fatigue hypothesis and S-N curve data. According to the long-term data of full-scale tests on the platforms in the Bohai Sea, the ice force spectrum of conical structures and the fatigue environmental model are established. Moreover, the finite element model of JZ20-2MSW platform, an example of ice-induced fatigue analysis, is built with ANSYS software. The mode analysis and dynamic analysis in frequency domain under all kinds of ice fatigue work conditions are carded on, and the fatigue life of the structure is estimated in detail. The methods in this paper can be helpful in ice-induced fatigue analysis of ice-resistant platforms.展开更多
Response spectral moments are useful for system reliability analysis.Usually,spectral mo- ments are calculated by the frequency domain method.Based on the time domain modal analysis of random vibrations,the authors pr...Response spectral moments are useful for system reliability analysis.Usually,spectral mo- ments are calculated by the frequency domain method.Based on the time domain modal analysis of random vibrations,the authors present a new method for calculating response spectral moments through response correlation functions.The method can be applied to both classical and non-classical damping cases and to three kinds of random excitations,i.e.,white noise,band-limited white noise, and filtered white noise.展开更多
Fourier transform (FF) is a commonly used method in spectral analysis of ocean wave and offshore structure responses, but it is not suitable for records of short length. In this paper another method, wavelet transfo...Fourier transform (FF) is a commonly used method in spectral analysis of ocean wave and offshore structure responses, but it is not suitable for records of short length. In this paper another method, wavelet transform (WT), is applied to 'analyze the data of short length. The Morlet wavelet is employed to calculate the spectra density functions for wave records and simulated Floating Production Storage and Offloading (FPSO) vessels' responses. Computed wave data include simulated wave data based on JONSWAP spectrum and the recorded data of Storm 149 from North Alwyn. Wavelet method is validated by comparing the statistical characteristics by WF method and those by fast Fourier transform (FFT) method with those of target spectra. The spectral density fnnctions' shapes calculated by WT are less malformed and have less error of statistical characteristics compared with those by FT especially when the record lengths decrease.展开更多
Nitrogen(N)monitoring is essential in nurseries to ensure the production of high-quality seedlings.Nearinfrared spectroscopy(NIRS)is an instantaneous,nondestructive method to monitor N.Spectral data such as NIRS can a...Nitrogen(N)monitoring is essential in nurseries to ensure the production of high-quality seedlings.Nearinfrared spectroscopy(NIRS)is an instantaneous,nondestructive method to monitor N.Spectral data such as NIRS can also provide the basis for developing a new vegetation spectral index(VSI).Here,we evaluated whether NIRS combined with statistical modeling can accurately detect early variations in N concentration in leaves of young plants of Annona emargiaata and developed a new VSI for this task.Plants were grown in a hydroponics system with 0,2.75,5.5or 11 mM N for 45 days.Then we measured gas exchange,chlorophylla fluorescence,and pigments in leaves;analyzed complete leaf nutrients,and recorded spectral data for leaves at 966 to 1685 nm using NIRS.With a statistical learning approach,the dimensionality of the spectral data was reduced,then models were generated using two classes(N deficiency,N)or four classes(0,2.75,5.5,11 mM N).The best combination of techniques for dimensionality reduction and classification,respectively,was stepwise regression(PROC STEPDISC)and linear discriminant function.It was possible to detect N deficiency in seedlings leaves with 100%precision,and the four N concentrations with93.55%accuracy before photosynthetic damage to the plant occurred.Thereby,NIRS combined with statistical modeling of multidimensional data is effective for detecting N variations in seedlings leaves of A.emarginata.展开更多
In this paper, we make use of the functional spectral analysis to infer the periodicity of paleoclimate in the Hongzuisi section since about 15 ka. Through combined analysis of organic carbon isotope and CaCO\-3 conte...In this paper, we make use of the functional spectral analysis to infer the periodicity of paleoclimate in the Hongzuisi section since about 15 ka. Through combined analysis of organic carbon isotope and CaCO\-3 content, the law of paleoclimatic evolution of the Hongzuisi section is obtained. There were climatic changes from 10 ka to about 0.1 ka over the last 15 ka. Among these cycles, the cycle of several ka is most remarkable. The result indicates that functional spectral analysis is helpful for paleoclimatic study, which can provide useful information about paleoclimatic reconstruction and future forecast.展开更多
Traditional unsupervised seismic facies analysis techniques need to assume that seismic data obey mixed Gaussian distribution.However,fi eld seismic data may not meet this condition,thereby leading to wrong classifi c...Traditional unsupervised seismic facies analysis techniques need to assume that seismic data obey mixed Gaussian distribution.However,fi eld seismic data may not meet this condition,thereby leading to wrong classifi cation in the application of this technology.This paper introduces a spectral clustering technique for unsupervised seismic facies analysis.This algorithm is based on on the idea of a graph to cluster the data.Its kem is that seismic data are regarded as points in space,points can be connected with the edge and construct to graphs.When the graphs are divided,the weights of the edges between the different subgraphs are as low as possible,whereas the weights of the inner edges of the subgraph should be as high as possible.That has high computational complexity and entails large memory consumption for spectral clustering algorithm.To solve the problem this paper introduces the idea of sparse representation into spectral clustering.Through the selection of a small number of local sparse representation points,the spectral clustering matrix of all sample points is approximately represented to reduce the cost of spectral clustering operation.Verifi cation of physical model and fi eld data shows that the proposed approach can obtain more accurate seismic facies classification results without considering the data meet any hypothesis.The computing efficiency of this new method is better than that of the conventional spectral clustering method,thereby meeting the application needs of fi eld seismic data.展开更多
This study endeavors to deal with the least square spectral analysis on the time series, to find present significant frequencies, to analyze 40 tide components using harmonic methods and to show relationship between d...This study endeavors to deal with the least square spectral analysis on the time series, to find present significant frequencies, to analyze 40 tide components using harmonic methods and to show relationship between discovered frequencies and 40 components of tide. For the purpose of collecting data of altimetry satellites of Topex/Poseidon (T/P), Jason 1, Jason 2 and coastal tide gauges of Bandar Anzali, Noshahr, and Nekah were utilized. In this time series formed by cross over points of altimetry satellite and then using least square spectral analysis on time series derived from altimetry satellite and coastal tide gauges the significant components were found and annual, biannual, and monthly components were discovered. Then, analysis of 40 tide components was conducted using harmonic method to find the amplitude and phase. It represented that solar annual (Sa) plays the most significant role on Caspian Sea corresponded to the least square spectral analysis of the time series. The results shows that the annual (Sa) and semi-annual Solar (Ssa) constituents on all of the ports listed have the highest amplitude in comparison with the other constituents which are respectively 16 cm, 18 cm and 15 cm for annual constituent and 2.8 cm, 5.4 cm and 3.7 cm for semi-annual constituent.展开更多
AIM: To determine the value of bowel sounds analysis using an electronic stethoscope to support a clinical diagnosis of intestinal obstruction. METHODS: Subjects were patients who presented with a diagnosis of possibl...AIM: To determine the value of bowel sounds analysis using an electronic stethoscope to support a clinical diagnosis of intestinal obstruction. METHODS: Subjects were patients who presented with a diagnosis of possible intestinal obstruction based on symptoms, signs, and radiological findings. A 3MTH Littmann Model 4100 electronic stethoscope was used in this study. With the patients lying supine, six 8-second recordings of bowel sounds were taken from each patient from the lower abdomen. The recordings were analysed for sound duration, soundto-sound interval, dominant frequency, and peak frequency. Clinical and radiological data were reviewed and the patients were classified as having either acute, subacute, or no bowel obstruction. Comparison of bowel sound characteristics was made between these subgroups of patients. In the presence of an obstruction, the site of obstruction was identified and bowel calibre was also measured to correlate with bowel sounds. RESULTS: A total of 71 patients were studied during the period July 2009 to January 2011. Forty patientshad acute bowel obstruction (27 small bowel obstruction and 13 large bowel obstruction), 11 had subacute bowel obstruction (eight in the small bowel and three in large bowel) and 20 had no bowel obstruction (diagnoses of other conditions were made). Twenty-five patients received surgical intervention (35.2%) during the same admission for acute abdominal conditions. A total of 426 recordings were made and 420 recordings were used for analysis. There was no significant difference in sound-to-sound interval, dominant frequency, and peak frequency among patients with acute bowel obstruction, subacute bowel obstruction, and no bowel obstruction. In acute large bowel obstruction, the sound duration was significantly longer (median 0.81 s vs 0.55 s, P = 0.021) and the dominant frequency was significantly higher (median 440 Hz vs 288 Hz, P = 0.003) when compared to acute small bowel obstruction. No significant difference was seen between acute large bowel obstruction and large bowel pseudoobstruction. For patients with small bowel obstruction, the sound-to-sound interval was significantly longer in those who subsequently underwent surgery compared with those treated non-operatively (median 1.29 s vs 0.63 s, P < 0.001). There was no correlation between bowel calibre and bowel sound characteristics in both acute small bowel obstruction and acute large bowel obstruction. CONCLUSION: Auscultation of bowel sounds is nonspecific for diagnosing bowel obstruction. Differences in sound characteristics between large bowel and small bowel obstruction may help determine the likely site of obstruction.展开更多
Fatigue failure has long been an important issue for ships and offshore structures. Among the numerous methods for predicting fatigue life, the spectral method is accepted as the most reliable. Although the theory beh...Fatigue failure has long been an important issue for ships and offshore structures. Among the numerous methods for predicting fatigue life, the spectral method is accepted as the most reliable. Although the theory behind spectral analysis is straight-forward, the analysis itself is complicated and time-consuming because it is closely related to critical technical details such as the application of fatigue loading (wave pressures and the inertial forces due to cargoes), the extraction of the stress, and the calculation of stress RAO. Here, four key technical details-loading application, displacement boundary condition, the calculation of stress RAO, and the extraction of the fatigue stress-are discussed thoroughly. For each aspect, a resolution is presented based on the finite element pre-and post-processing software MSC/PATRAN or FE solver MSC/NASTRAN. The resolutions are effective and efficient, which can help engineers perform spectral fatigue analysis accurately and faster.展开更多
基金Project supported by the Shanghai Science and Technology Innovation Action(Grant No.22dz1208700).
文摘Pulse echo accumulation is commonly employed in coherent Doppler wind LiDAR(light detection and ranging)under the assumption of steady wind.Here,the measured spectral data are analyzed in the time dimension and frequency dimension to cope with the temporal wind shear and achieve the optimal accumulation time.A hardware-efficient algorithm combining the interpolation and cross-correlation is used to enhance the wind retrieval accuracy by reducing the frequency sampling interval and then reduce the spectral width calculation error.Moreover,the temporal broadening effect and spatial broadening effect are decoupled according to the strategy we developed.
基金Supported by the Key Projects in the National Science&Technology Pillar Program,China(No.2007BAI38B03)the Development Program of the Science and Technology of Jilin Province,China(Nos.200705C07,20075020)the 11th Five-Year Key Project of Jilin Province Education Department,China(No.[2010]205)
文摘The optimal selection method of spectral region based on the grey correlation analysis was applied in the analysis of near-infrared(NIR) spectra. In order to compute "characteristic" spectral region, 160 samples of tobacco were surveyed by NIR. Next, the whole spectral region was randomly divided into six regions, and the values of association coefficients and correlation orders of different regions were computed for total sugar, reducing sugar and nicotine. Moreover, two regions that owned the largest value of association coefficient were regarded as "characteristic" spectral region of a model. Finally, the quantitative analysis models of different components were established via the partial least squares method, and the common selection methods of spectral region were compared. The simulation results indicate that the models to choose the spectral region based on grey correlation analysis are more effective than the common selection methods of spectral region, the optimized time of algorithm is shorter, the prediction precision of the models is higher and generalization ability for quantitative analysis results is stronger. This research can provide the support for the quantitative analysis models of NIR spectra and new idea for commercial analysis software of NIR. So, it has a high application value in the analysis of NIR spectra.
文摘Near-infrared (NIR) spectroscopy combined with chemometrics methods was applied to the rapid and reagent-free analysis of serum urea nitrogen (SUN). The mul-partitions modeling was performed to achieve parameter stability. A large-scale parameter cyclic and global optimization platform for Norris derivative filter (NDF) of three parameters (the derivative order: d, the number of smoothing points: s and the number of differential gaps: g) was developed with PLS regression. Meantime, the parameters’ adaptive analysis of NDF algorithm was also given, and achieved a significantly better modeling effect than one without spectral pre-processing. After eliminating the interference wavebands of saturated absorption, the modeling performance was further improved. In validation, the root mean square error (SEP), correlation coefficient (RP) for prediction and the ratio of performance to deviation (RPD) were 1.66 mmol?L-1, 0.966 and 4.7, respectively. The results showed that the high-precision analysis of SUN was feasibility based on NIR spectroscopy and Norris-PLS. The global optimization method of NDF is also expected to be applied to other analysis objects.
文摘The identification of liquor brands is very important for food safety. Most of the fake liquors are usually made into the products with the same flavor and alcohol content as regular brand, so the identification for the liquor brands with the same flavor and the same alcohol content is essential. However, it is also difficult because the components of such liquor samples are very similar. Near-infrared (NIR) spectroscopy combined with partial least squares discriminant analysis (PLS-DA) was applied to identification of liquor brands with the same flavor and alcohol content. A total of 160 samples of Luzhou Laojiao liquor and 200 samples of non-Luzhou Laojiao liquor with the same flavor and alcohol content were used for identification. Samples of each type were randomly divided into the modeling and validation sets. The modeling samples were further divided into calibration and prediction sets using the Kennard-Stone algorithm to achieve uniformity and representativeness. In the modeling and validation processes based on PLS-DA method, the recognition rates of samples achieved 99.1% and 98.7%, respectively. The results show high prediction performance for the identification of liquor brands, and were obviously better than those obtained from the principal component linear discriminant analysis method. NIR spectroscopy combined with the PLS-DA method provides a quick and effective means of the discriminant analysis of liquor brands, and is also a promising tool for large-scale inspection of liquor food safety.
文摘Partial least squares discriminant analysis (PLS-DA) with integrated moving-window (MW) waveband screening was applied to the discriminant analysis of liquor brands with near-infrared (NIR) spectroscopy. Luzhou Laojiao, a popular liquor with strong fragrant flavor, was used as the identified liquor brand (160 samples, negative, 52 vol alcoholicity). Liquors of 10 other brands with strong fragrant flavor were used as the interferential brands (200 samples, positive, 52 vol alcoholicity). The Kennard-Stone algorithm was used for the division of modeling samples to achieve uniformity and representativeness. Based on the MW-PLS-DA, a simplified optimal model set with 157 wavebands was further proposed. This set contained five types of wavebands corresponding to the NIR absorption bands of water, ethanol, and other micronutrients (i.e., acids, aldehydes, phenols, and aromatic compounds) in liquor for practical choice. Using five selected simple models with 4775 - 4239, 7804 - 6569, 6264 - 5844, 9435 - 7896, and 12066 - 10373 cm-1, the validation recognition rates were obtained as 99.3% or higher. Results show good prediction performance and low model complexity, and also provided a valuable reference for designing small dedicated instruments. The proposed method is a promising tool for large-scale inspection of liquor food safety.
基金Financial support was received from the National High-tech Industry Development Project of National Development and Reform Commission(Nos.2007-2490).
文摘A rapid quantitative analytical method for three components of Lonicerae Japornicae Flos solution(Lonicera Japonica Thumb.)extracted by water was developed using near-infrared(NIR)spectroscopy and the partial least-squares(PLS)method.The NIR spectra of 81 samples collected from a production line were obtained.The concentrations of secologanic acid,chlorogenicacid and galuteolin were detemmined by using high-performance liquid chromatography-diodearray detection as the reference method.Several pretreatment methods for the NIR spectra wereusedi during PLS calibration.The most appropriate latent variable number of the PLS factor wasselected based on the standard error of cross-validation(SECV).The performance of the finalPLS models was evaluated according to SECV,standard error of predliction(SEP)and deter-mination coeficient(R^(2)).The compounds secologanic acid,chlorogenic acid and galuteolin hadSEP values of 0.030,0.061 and 1.668μg/mL,respectively and R^(2) values over 0.85.This workshows that NIR spectroscopy is a rapid and convenient method for the analysis of LoniceraeJaponicae Flos solution extracted by water.The proposed method can help in the application ofprocs analytical technology in the pha maceutical industry,particularly in tra ditional Chinesemedicine injections.
文摘Using visible and near-infrared (Vis-NIR) spectroscopy combined with partial least squares (PLS) regression, the rapid reagent-free analysis model for chromium (Cr) content in tideland reclamation soil in the Pearl River Delta, China was established. Based on Savitzky-Golay (SG) smoothing and PLS regression, a multi-parameters optimization platform (SG-PLS) covering 264 modes was constructed to select the appropriately spectral preprocessing mode. The optimal SG-PLS model was determined according to the prediction effect. The selected optimal parameters <em>d, p, m</em> and LV were 2, 6, 23 and 8, respectively. Using the validation samples that were not involved in modeling, the root mean square error (SEP<sub>V</sub>), relative root mean square error (R-SEP<sub>V</sub>) and correlation coefficients (R<sub>P, V</sub>) of prediction were 11.66 mg<span style="white-space:nowrap;">·</span>kg<sup>-1</sup>, 10.7% and 0.722, respectively. The results indicated that the feasibility of using Vis-NIR spectroscopy combined with SG-PLS method to analyze soil Cr content. The constructed multi-parameters optimization platform with SG-PLS is expected to be applied to a wider field of analysis. The rapid detection method has important application values to large-scale agricultural production.
文摘Near-infrared (NIR) spectroscopy was applied to reagent-free quantitative analysis of polysaccharide of a brand product of proprietary Chinese medicine (PCM) oral solution samples. A novel method, called absorbance upper optimization partial least squares (AUO-PLS), was proposed and successfully applied to the wavelength selection. Based on varied partitioning of the calibration and prediction sample sets, the parameter optimization was performed to achieve stability. On the basis of the AUO-PLS method, the selected upper bound of appropriate absorbance was 1.53 and the corresponding wavebands combination was 400 - 1880 & 2088 - 2346 nm. With the use of random validation samples excluded from the modeling process, the root-mean-square error and correlation coefficient of prediction for polysaccharide were 27.09 mg·L<sup>-</sup><sup>1</sup> and 0.888, respectively. The results indicate that the NIR prediction values are close to those of the measured values. NIR spectroscopy combined with AUO-PLS method provided a promising tool for quantification of the polysaccharide for PCM oral solution and this technique is rapid and simple when compared with conventional methods.
文摘The identification of soy sauce adulteration can avoid fraud, and protect the rights and interests of producers and consumers. Based on two measurement models (1 mm, 10 mm), the visible and near-infrared (Vis-NIR) spectroscopy combined with standard normal variate-partial least squares-discriminant analysis (SNV-PLS-DA) was used to establish the discriminant analysis models for adulterated and brewed soy sauces. Chubang soy sauce was selected as an identification brand (negative, 70). The adulteration samples (positive, 72) were prepared by mixing Chubang soy sauce and blended soy sauce with different adulteration rates. Among them, the “blended soy sauce” sample was concocted of salt water (NaCl), monosodium glutamate (C<sub>5</sub>H<sub>10</sub>NNaO<sub>5</sub>) and caramel color (C<sub>6</sub>H<sub>8</sub>O<sub>3</sub>). The rigorous calibration-prediction-validation sample design was adopted. For the case of 1 mm, five waveband models (visible, short-NIR, long-NIR, whole NIR and whole scanning regions) were established respectively;in the case of 10 mm, three waveband models (visible, short-NIR and visible-short-NIR regions) for unsaturated absorption were also established respectively. In independent validation, the models of all wavebands in the cases of 1 mm and 10 mm have achieved good discrimination effects. For the case of 1 mm, the visible model achieved the optimal validation effect, the validation recognition-accuracy rate (RAR<sub>V</sub>) was 99.6%;while in the case of 10 mm, both the visible and visible-short-NIR models achieved the optimal validation effect (RAR<sub>V</sub> = 100%). The detection method does not require reagents and is fast and simple, which is easy to promote the application. The results can provide valuable reference for designing small dedicated spectrometers with different measurement modals and different spectral regions.
文摘Functional near-infrared spectroscopy(fNIRS)is a neuroimaging technology which is suitable for psychiatric patients.Several fNIRS studies have found abnormal brain activations during cognitive tasks in elderly depression.In this paper,we proposed a discriminative model of multivariate pattern classification based on fNIRS signals to distinguish elderly depressed patients from healthy controls.This model used the brain activation patterns during a verbal fluency task as features of classification.Then Pseudo-Fisher Linear Discriminant Analysis was performed on the feature space to generate discriminative model.Using leave-one-out(LOO)cross-validation,our results showed a correct classification rate of 88%.The discriminative model showed its ability to identify people with elderly depression and suggested that fNIRS may be an efficient clinical tool for diagnosis of depression.This study may provide the first step for the development of neuroimaging biomarkers based on fNIRS in psychiatric disorders.
文摘Near-infrared spectroscopy coupled with kernel partial least squares-discriminant analysis was used to rapidly screen water containing malathion. In the wavenumber of 4348 cm-1 to 9091 cm-1, the overall correct classification rate of kernel partial least squares-discriminant analysis was 100% for training set, and 100% for test set, with the lowest concentration detected malathion residues in water being 1 μg·ml-1. Kernel partial least squares-discriminant analysis was able to have a good performance in classifying data in nonlinear systems. It was inferred that Near-infrared spectroscopy coupled with the kernel partial least squares-discriminant analysis had a potential in rapid screening other pesticide residues in water.
基金The paper was supported by the National 863 High Technology Develpoment Plan Project(Grant No.2001AA602015)
文摘The spectral methods and ice-induced fatigue analysis are discussed based on Miner's linear cumulative fatigue hypothesis and S-N curve data. According to the long-term data of full-scale tests on the platforms in the Bohai Sea, the ice force spectrum of conical structures and the fatigue environmental model are established. Moreover, the finite element model of JZ20-2MSW platform, an example of ice-induced fatigue analysis, is built with ANSYS software. The mode analysis and dynamic analysis in frequency domain under all kinds of ice fatigue work conditions are carded on, and the fatigue life of the structure is estimated in detail. The methods in this paper can be helpful in ice-induced fatigue analysis of ice-resistant platforms.
基金Project supported by the National Natural Science Foundation of China.
文摘Response spectral moments are useful for system reliability analysis.Usually,spectral mo- ments are calculated by the frequency domain method.Based on the time domain modal analysis of random vibrations,the authors present a new method for calculating response spectral moments through response correlation functions.The method can be applied to both classical and non-classical damping cases and to three kinds of random excitations,i.e.,white noise,band-limited white noise, and filtered white noise.
文摘Fourier transform (FF) is a commonly used method in spectral analysis of ocean wave and offshore structure responses, but it is not suitable for records of short length. In this paper another method, wavelet transform (WT), is applied to 'analyze the data of short length. The Morlet wavelet is employed to calculate the spectra density functions for wave records and simulated Floating Production Storage and Offloading (FPSO) vessels' responses. Computed wave data include simulated wave data based on JONSWAP spectrum and the recorded data of Storm 149 from North Alwyn. Wavelet method is validated by comparing the statistical characteristics by WF method and those by fast Fourier transform (FFT) method with those of target spectra. The spectral density fnnctions' shapes calculated by WT are less malformed and have less error of statistical characteristics compared with those by FT especially when the record lengths decrease.
基金a scholarship from Capes(Coordena??o de Aperfei?oamento de Pessoal de Nível Superior)-Brazil(Award number:001)for the first author。
文摘Nitrogen(N)monitoring is essential in nurseries to ensure the production of high-quality seedlings.Nearinfrared spectroscopy(NIRS)is an instantaneous,nondestructive method to monitor N.Spectral data such as NIRS can also provide the basis for developing a new vegetation spectral index(VSI).Here,we evaluated whether NIRS combined with statistical modeling can accurately detect early variations in N concentration in leaves of young plants of Annona emargiaata and developed a new VSI for this task.Plants were grown in a hydroponics system with 0,2.75,5.5or 11 mM N for 45 days.Then we measured gas exchange,chlorophylla fluorescence,and pigments in leaves;analyzed complete leaf nutrients,and recorded spectral data for leaves at 966 to 1685 nm using NIRS.With a statistical learning approach,the dimensionality of the spectral data was reduced,then models were generated using two classes(N deficiency,N)or four classes(0,2.75,5.5,11 mM N).The best combination of techniques for dimensionality reduction and classification,respectively,was stepwise regression(PROC STEPDISC)and linear discriminant function.It was possible to detect N deficiency in seedlings leaves with 100%precision,and the four N concentrations with93.55%accuracy before photosynthetic damage to the plant occurred.Thereby,NIRS combined with statistical modeling of multidimensional data is effective for detecting N variations in seedlings leaves of A.emarginata.
基金GrantedbytheNationalNaturalScienceFoundationofChina (No .4 9972 0 5 7)
文摘In this paper, we make use of the functional spectral analysis to infer the periodicity of paleoclimate in the Hongzuisi section since about 15 ka. Through combined analysis of organic carbon isotope and CaCO\-3 content, the law of paleoclimatic evolution of the Hongzuisi section is obtained. There were climatic changes from 10 ka to about 0.1 ka over the last 15 ka. Among these cycles, the cycle of several ka is most remarkable. The result indicates that functional spectral analysis is helpful for paleoclimatic study, which can provide useful information about paleoclimatic reconstruction and future forecast.
基金This work was supported by National Natural Science Foundation of China(Nos.U1562218,41604107,and 41804126).
文摘Traditional unsupervised seismic facies analysis techniques need to assume that seismic data obey mixed Gaussian distribution.However,fi eld seismic data may not meet this condition,thereby leading to wrong classifi cation in the application of this technology.This paper introduces a spectral clustering technique for unsupervised seismic facies analysis.This algorithm is based on on the idea of a graph to cluster the data.Its kem is that seismic data are regarded as points in space,points can be connected with the edge and construct to graphs.When the graphs are divided,the weights of the edges between the different subgraphs are as low as possible,whereas the weights of the inner edges of the subgraph should be as high as possible.That has high computational complexity and entails large memory consumption for spectral clustering algorithm.To solve the problem this paper introduces the idea of sparse representation into spectral clustering.Through the selection of a small number of local sparse representation points,the spectral clustering matrix of all sample points is approximately represented to reduce the cost of spectral clustering operation.Verifi cation of physical model and fi eld data shows that the proposed approach can obtain more accurate seismic facies classification results without considering the data meet any hypothesis.The computing efficiency of this new method is better than that of the conventional spectral clustering method,thereby meeting the application needs of fi eld seismic data.
文摘This study endeavors to deal with the least square spectral analysis on the time series, to find present significant frequencies, to analyze 40 tide components using harmonic methods and to show relationship between discovered frequencies and 40 components of tide. For the purpose of collecting data of altimetry satellites of Topex/Poseidon (T/P), Jason 1, Jason 2 and coastal tide gauges of Bandar Anzali, Noshahr, and Nekah were utilized. In this time series formed by cross over points of altimetry satellite and then using least square spectral analysis on time series derived from altimetry satellite and coastal tide gauges the significant components were found and annual, biannual, and monthly components were discovered. Then, analysis of 40 tide components was conducted using harmonic method to find the amplitude and phase. It represented that solar annual (Sa) plays the most significant role on Caspian Sea corresponded to the least square spectral analysis of the time series. The results shows that the annual (Sa) and semi-annual Solar (Ssa) constituents on all of the ports listed have the highest amplitude in comparison with the other constituents which are respectively 16 cm, 18 cm and 15 cm for annual constituent and 2.8 cm, 5.4 cm and 3.7 cm for semi-annual constituent.
文摘AIM: To determine the value of bowel sounds analysis using an electronic stethoscope to support a clinical diagnosis of intestinal obstruction. METHODS: Subjects were patients who presented with a diagnosis of possible intestinal obstruction based on symptoms, signs, and radiological findings. A 3MTH Littmann Model 4100 electronic stethoscope was used in this study. With the patients lying supine, six 8-second recordings of bowel sounds were taken from each patient from the lower abdomen. The recordings were analysed for sound duration, soundto-sound interval, dominant frequency, and peak frequency. Clinical and radiological data were reviewed and the patients were classified as having either acute, subacute, or no bowel obstruction. Comparison of bowel sound characteristics was made between these subgroups of patients. In the presence of an obstruction, the site of obstruction was identified and bowel calibre was also measured to correlate with bowel sounds. RESULTS: A total of 71 patients were studied during the period July 2009 to January 2011. Forty patientshad acute bowel obstruction (27 small bowel obstruction and 13 large bowel obstruction), 11 had subacute bowel obstruction (eight in the small bowel and three in large bowel) and 20 had no bowel obstruction (diagnoses of other conditions were made). Twenty-five patients received surgical intervention (35.2%) during the same admission for acute abdominal conditions. A total of 426 recordings were made and 420 recordings were used for analysis. There was no significant difference in sound-to-sound interval, dominant frequency, and peak frequency among patients with acute bowel obstruction, subacute bowel obstruction, and no bowel obstruction. In acute large bowel obstruction, the sound duration was significantly longer (median 0.81 s vs 0.55 s, P = 0.021) and the dominant frequency was significantly higher (median 440 Hz vs 288 Hz, P = 0.003) when compared to acute small bowel obstruction. No significant difference was seen between acute large bowel obstruction and large bowel pseudoobstruction. For patients with small bowel obstruction, the sound-to-sound interval was significantly longer in those who subsequently underwent surgery compared with those treated non-operatively (median 1.29 s vs 0.63 s, P < 0.001). There was no correlation between bowel calibre and bowel sound characteristics in both acute small bowel obstruction and acute large bowel obstruction. CONCLUSION: Auscultation of bowel sounds is nonspecific for diagnosing bowel obstruction. Differences in sound characteristics between large bowel and small bowel obstruction may help determine the likely site of obstruction.
文摘Fatigue failure has long been an important issue for ships and offshore structures. Among the numerous methods for predicting fatigue life, the spectral method is accepted as the most reliable. Although the theory behind spectral analysis is straight-forward, the analysis itself is complicated and time-consuming because it is closely related to critical technical details such as the application of fatigue loading (wave pressures and the inertial forces due to cargoes), the extraction of the stress, and the calculation of stress RAO. Here, four key technical details-loading application, displacement boundary condition, the calculation of stress RAO, and the extraction of the fatigue stress-are discussed thoroughly. For each aspect, a resolution is presented based on the finite element pre-and post-processing software MSC/PATRAN or FE solver MSC/NASTRAN. The resolutions are effective and efficient, which can help engineers perform spectral fatigue analysis accurately and faster.