Preliminary Hydrogeologic Modeling and Optimal Monitoring Network Design for a Contaminated Abandoned Mine Site Area: Application of Developed Monitoring Network Design Software

In abandoned mine sites, i.e., mine sites where mining operations have ended, wide spread contaminations are often evident, but the potential sources and pathways of contamination especially through the subsurface, are difficult to identify due to inadequate and sparse geochemical measurements available. Therefore, it is essential to design and implement a planned monitoring net-work to obtain essential information required for establishing the potential contamination source locations, i.e., waste dumps, tailing dams, pits and possible pathways through the subsurface, and to design a remediation strategy for rehabilitation. This study presents an illustrative application of modeling the flow and transport processes and monitoring network design in a study area hydrogeologically resembling an abandoned mine site in Queensland, Australia. In this preliminary study, the contaminant transport process modeled does not incorporate the reactive geochemistry of the contaminants. The transport process is modeled considering a generic conservative contaminant for the illustrative purpose of showing the potential application of an optimal monitoring design methodology. This study aims to design optimal monitoring network to: 1) minimize the contaminant solute mass estimation error;2) locate the plume boundary;3) select the monitoring locations with (potentially) high concentrations. A linked simulation optimization based methodology is utilized for optimal monitoring network design. The methodology is applied utilizing a recently developed software package CARE-GWMND, developed at James Cook University for optimal monitoring network design. Given the complexity of the groundwater systems and the sparsity of pollutant concentration observation data from the field, this software is capable of simulating the groundwater flow and solute transport with spatial interpolation of data from a sparse set of available data, and it utilizes the optimization algorithm to determine optimum locations for implementing monitoring wells.

An Ant Colony Algorithm Based on Cross-Layer Design for Routing and Wavelength Assignment in Optical Satellite Networks

This paper introduces an ant colony routing and wavelength assignment algorithm based on cross-layer design(CL-ACRWA),which can overcome the adverse effects of Doppler wavelength shift on data transmission in optical satellite networks. Firstly, a cross-layer optimization model is built, which considers the Doppler wavelength shift, the transmission delay as well as wavelength-continuity constraint. Then an ant colony algorithm is utilized to solve the cross-layer optimization model, resulting in finding an optimal light path satisfying the above constraints for every connection request. The performance of CL-ACRWA is measured by the communication success probability, the convergence property and the transmission delay. Simulation results show that CL-ACRWA performs well in communication success probability and has good global search ability as well as fast convergence speed. Meanwhile, the transmission delay can meet the basic requirement of real-time transmission of business.

Integrated Sequential Groundwater Contaminant Source Characterization and Pareto-Optimal Monitoring Network Design Application for a Contaminated Aquifer Site

Accurate and reliable groundwater contaminant source characterization with limited contaminant concentration monitoring measurement data remains a challenging problem. This study presents an illustrative application of developed methodologies to a real-life contaminated aquifer. The source characterization and optimal monitoring network design methodologies are used sequentially for a contaminated aquifer site located in New South Wales, Australia. Performance of the integrated optimal source characterization methodology combining linked simulation-optimization, fractal singularity mapping technique (FSMT) and Pareto optimal solutions is evaluated. This study presents an integrated application of optimal source characterization with spatiotemporal concentration measurement data obtained from sequentially designed monitoring networks. The proposed sequential source characterization and monitoring network design methodology shows efficiency in identifying the unknown source characteristics. The designed monitoring network achieves comparable efficiency and accuracy utilizing much smaller number of monitoring locations as compared to a more ideal scenario where concentration measurements from a very large number of widespread monitoring wells are available. The proposed methodology is potentially useful for efficient characterization of unknown contaminant sources in a complex contaminated aquifer site, where very little initial concentration measurement data are available. The illustrative application of the methodology to a real-life contaminated aquifer site demonstrates the capability and efficiency of the proposed methodology.

Ethanol mediated As(Ⅲ) adsorption onto Zn-loaded pinecone biochar：Experimental investigation,modeling,and optimization using hybrid artificial neural network-genetic algorithm approach

Organic matters（OMs） and their oxidization products often influence the fate and transport of heavy metals in the subsurface aqueous systems through interaction with the mineral surfaces. This study investigates the ethanol（EtO H）-mediated As（Ⅲ） adsorption onto Zn-loaded pinecone（PC） biochar through batch experiments conducted under Box–Behnken design. The effect of EtO H on As（Ⅲ） adsorption mechanism was quantitatively elucidated by fitting the experimental data using artificial neural network and quadratic modeling approaches. The quadratic model could describe the limiting nature of EtO H and pH on As（Ⅲ） adsorption,whereas neural network revealed the stronger influence of Et OH（64.5%） followed by pH（20.75%）and As（Ⅲ） concentration（14.75%） on the adsorption phenomena. Besides, the interaction among process variables indicated that Et OH enhances As（Ⅲ） adsorption over a pH range of2 to 7, possibly due to facilitation of ligand–metal（Zn） binding complexation mechanism.Eventually, hybrid response surface model–genetic algorithm（RSM–GA） approach predicted a better optimal solution than RSM, i.e., the adsorptive removal of As（Ⅲ）（10.47 μg/g） is facilitated at 30.22 mg C/L of Et OH with initial As（Ⅲ） concentration of 196.77 μg/L at pH 5.8. The implication of this investigation might help in understanding the application of biochar for removal of various As（Ⅲ） species in the presence of OM.

Optimal Design of Two Road Networks Based on their Properties

In this paper, we discuss some fundamental properties of two idealized typical networks, namely, grid type and radial-circular type. The discussion is based on SPCP （Shortest Path Counting Problem）, which reflects the traffic density of a road segment. Furthermore, we compare their effectiveness based on the obtained results of the above two road networks, and suggest some proposals on the design of car lanes by considering the direction of a road segment in relation to these road networks.