This paper presents a new way to realize controlled nuclear fusion. The way is that a single energy neutron beam fuses with given nuclei, such as lithium nuclei or boron nuclei, so that the nuclear energy is released....This paper presents a new way to realize controlled nuclear fusion. The way is that a single energy neutron beam fuses with given nuclei, such as lithium nuclei or boron nuclei, so that the nuclear energy is released. The sort of fusion can be achieved at low temperatures, because a neutron has no charge and has a large reaction cross section with a nucleus. The fusion is easy to control and does not produce radioactive spent nuclear fuel. One of the five sorts of neutron sources is the electron neutron source in which a single energy electron beam collides with a single energy bare nucleus beam, such as the deuteron, to produce a single energy neutron. These neutrons irradiate target nuclei and are absorbed by the target nuclei, so that nuclear energy is released. Compared with conventional fusion, it has the disadvantage of releasing less energy and energy density. In addition, it takes a certain amount of energy to produce a beam of single-energy neutrons. However, if some of the input energy can be effectively recycled, the fusion process must produce more energy than the input energy.展开更多
Applying the extreme low-level γ-ray spectroscopic analysis the environmental neutron flux is measured using different moderator construction and environment through the reaction 197Au (n, γ) 198Au. The contribution...Applying the extreme low-level γ-ray spectroscopic analysis the environmental neutron flux is measured using different moderator construction and environment through the reaction 197Au (n, γ) 198Au. The contribution of thermal and resonance neutrons is separated using the cadmium difference technique, while fast neutrons are measured by the paraffin moderator. The results of altitude dependence of the neutron flux are discussed. The thermal neutron flux near the surface of sea water is less than its value at 100 cm over ground near sea water, while the value over the surfaces of fresh water is higher than that near the surface of sea water. Also the thermal neutron flux at 5 cm soil depth increases, then decreases to its original value at 10 cm depth and still constant until 25 cm, then decreases rapidly to reach 27% of its original value at 60 cm depth. The soil compositions, corresponding neutron temperatures and effective absorption cross sections of earth are the most effective factors on the equilibrium region of thermal neutrons in the ground.展开更多
The thermoelectric energy conversion technique by employing the Disk-Magnet Electromagnetic Induction (DM-EMI) is examined in detail, and possible applications to heat engines as one of the energy-harvesting technolog...The thermoelectric energy conversion technique by employing the Disk-Magnet Electromagnetic Induction (DM-EMI) is examined in detail, and possible applications to heat engines as one of the energy-harvesting technologies are discussed. The idea is induced by the analysis of thermomechanical dynamics (TMD) for a nonequilibrium irreversible thermodynamic system of heat engines, such as a drinking bird and a low temperature Stirling engine, resulting in thermoelectric energy generation different from conventional heat engines. The current thermoelectric energy conversion with DM-EMI can be applied to wide ranges of machines and temperature differences. The mechanism of DM-EMI energy converter is categorized as the axial flux generator (AFG), which is the reason why the technology is applicable to sensitive thermoelectric conversions. On the other hand, almost all the conventional turbines use the radius flux generator to extract huge electric power, which uses the radial flux generator (RFG). The axial flux generator is helpful for a low mechanoelectric energy conversion and activations of waste heat from macroscopic energy generators such as wind, geothermal, thermal, nuclear power plants and heat-dissipation lines. The technique of DM-EMI will contribute to solving environmental problems to maintain clean and sustainable energy as one of the energy harvesting technologies.展开更多
Viscosity stability indexes of mold flux at high temperature and low temperature havebeen introduced and the effects of flux compositions on viscosity stability indexeshave been studied. Two mold fluxes have been deve...Viscosity stability indexes of mold flux at high temperature and low temperature havebeen introduced and the effects of flux compositions on viscosity stability indexeshave been studied. Two mold fluxes have been developed by analyzing the effects offlux viscosity stability on the process and the condition of continuous casting slab ofmedium carbon steel. The results show that the fluxes are suitable for the process.展开更多
文摘This paper presents a new way to realize controlled nuclear fusion. The way is that a single energy neutron beam fuses with given nuclei, such as lithium nuclei or boron nuclei, so that the nuclear energy is released. The sort of fusion can be achieved at low temperatures, because a neutron has no charge and has a large reaction cross section with a nucleus. The fusion is easy to control and does not produce radioactive spent nuclear fuel. One of the five sorts of neutron sources is the electron neutron source in which a single energy electron beam collides with a single energy bare nucleus beam, such as the deuteron, to produce a single energy neutron. These neutrons irradiate target nuclei and are absorbed by the target nuclei, so that nuclear energy is released. Compared with conventional fusion, it has the disadvantage of releasing less energy and energy density. In addition, it takes a certain amount of energy to produce a beam of single-energy neutrons. However, if some of the input energy can be effectively recycled, the fusion process must produce more energy than the input energy.
文摘Applying the extreme low-level γ-ray spectroscopic analysis the environmental neutron flux is measured using different moderator construction and environment through the reaction 197Au (n, γ) 198Au. The contribution of thermal and resonance neutrons is separated using the cadmium difference technique, while fast neutrons are measured by the paraffin moderator. The results of altitude dependence of the neutron flux are discussed. The thermal neutron flux near the surface of sea water is less than its value at 100 cm over ground near sea water, while the value over the surfaces of fresh water is higher than that near the surface of sea water. Also the thermal neutron flux at 5 cm soil depth increases, then decreases to its original value at 10 cm depth and still constant until 25 cm, then decreases rapidly to reach 27% of its original value at 60 cm depth. The soil compositions, corresponding neutron temperatures and effective absorption cross sections of earth are the most effective factors on the equilibrium region of thermal neutrons in the ground.
文摘The thermoelectric energy conversion technique by employing the Disk-Magnet Electromagnetic Induction (DM-EMI) is examined in detail, and possible applications to heat engines as one of the energy-harvesting technologies are discussed. The idea is induced by the analysis of thermomechanical dynamics (TMD) for a nonequilibrium irreversible thermodynamic system of heat engines, such as a drinking bird and a low temperature Stirling engine, resulting in thermoelectric energy generation different from conventional heat engines. The current thermoelectric energy conversion with DM-EMI can be applied to wide ranges of machines and temperature differences. The mechanism of DM-EMI energy converter is categorized as the axial flux generator (AFG), which is the reason why the technology is applicable to sensitive thermoelectric conversions. On the other hand, almost all the conventional turbines use the radius flux generator to extract huge electric power, which uses the radial flux generator (RFG). The axial flux generator is helpful for a low mechanoelectric energy conversion and activations of waste heat from macroscopic energy generators such as wind, geothermal, thermal, nuclear power plants and heat-dissipation lines. The technique of DM-EMI will contribute to solving environmental problems to maintain clean and sustainable energy as one of the energy harvesting technologies.
文摘Viscosity stability indexes of mold flux at high temperature and low temperature havebeen introduced and the effects of flux compositions on viscosity stability indexeshave been studied. Two mold fluxes have been developed by analyzing the effects offlux viscosity stability on the process and the condition of continuous casting slab ofmedium carbon steel. The results show that the fluxes are suitable for the process.
