Size fractionated biomass and productivity of phytoplankton and new production in the Prydz Bay and the adjacent Indian sector of the Southern Ocean during the austral summer 1998/1999

The paper deals with the studies on the cell abundance, the composition of dominant species, size fractionated biomass and productivity of phytoplankton, new production, the environmentally restricted mechanism in the Prydz Bay and the adjacent Indian sector of the Southern Ocean during the austral summer 1998/1999. The results showed that there was marked feature of spatial zonation in the sea areas investigated. In the Prydz Bay and its adjacent continental shelf, the biomass and productivity of phytoplankton were high; those of continental slope and open ocean area were obviously low. The nutrient concentration had opposite distribution trend, due to the consumption of phytoplankton. It mainly affected by the vertical stability of water column, grazing pressure of zooplankton, temperature and light etc. The results of size-fractionation showed that the average contribution of netplankton to total chlorophyll a in studied sea areas was 52.2 %, those of nano- and picoplankton were 29.4 % and 18.4 %, respectively. The average contribution of netplankton to total primary production was 52.4 %, those of nano- and picoplankton were 28.7 % and 18.9 %, separately. It is same as previous conclusion that the contribution of picoplankton to productivity is slightly larger than that to biomass of phytoplankton communities. The average new production and f-ratio were 230.6 mg/ (m(2.)d) and 0.43, respectively.

Distribution characteristics of size-fractionated chlorophyll a, primary production and new production in the Laizhou Bay, July 1997

The distributions of chlorophyll a concentration, primary production and new productionwere observed in the Laizhou Bay of the Bohai Sea in both spring and neap tides during July 1997. The results showed that there were marked features of spatial zonation in the surveyed area, due to the differences between the geographic environment and the hydrological conditions. Chlorophyll a, primary production and new production were all higher in spring tides than that in neap tides in the Laizhou Bay. The highest values of these parameters were encountered in the central regions of the bay. At most stations, chlorophyll a concentrations at the bottom were higher than that at the surface. The results of size-fractionated chlorophyll a and primary production showed that contributions of nanocombining pi-coplankton ( <20 μm) to total chlorophyll a and primary production were dominant in phytoplankton community biomass and production of the Laizhou Bay. The environmental factors, primary production and new production in the Laizhou Bay are compared with other sea areas.

Application of vertically integrated sampling approach to study of new production via ^(234)Th -^(238)U disequilibria

The spatial and temporal distributions of new production vary largely in different sea areas. To understand the level of new production in the sea area studied better, an estimate of new production must be obtained in large spatial and temporal scales. The ~234Th/ ~238U disequilibrium is an effective method for the study of new production. Two sampling strategies, vertically integrated sampling ap proach based on trapezoidal integration principle and discrete layer sampling approach, were compared in the studies of the xiamen Bay and the northern South China Sea. The scavenging fluxes and removal fluxes of ~234Th and the residence times for dissolved and particulate ~234Th were calculated. The coinci dent results from two Sampling approach suggest that vertically integrated sampling approach is not only effective and reliable, but also significantly reduces the number and volume of samples. It allows us to study new production by ba ^(234)Th - ^(238)U disequilibria in large spatial scale.

Estimates of potential new production in the Java-Sumatra upwelling system

The Java-Sumatra upwelling is one of the most important upwelling systems in the Indian Ocean, with maximum upwelling intensity in July through August. To estimate the nitrate supplied by upwelling, we developed a three-dimensional hydrodynamic model to calculate the mean vertical speed and determine the depth of upwelling. We used in-situ vertical nitrate profiles to assess nitrate concentration in the upwelled waters, and calculated the nitrate supply as the product of nitrate concentration and vertical transport obtained from the numerical model. The calculated result represents potential new production generated in the upwelling region. We found that on the event time scale (monthly) of Java-Sumatra upwelling, water brought to the surface originated from locations 100-m deep, giving a nitrate supply of 93.77×10 3mol/s and potential new production of 1.02×10 14gC/a.

A new production technique for wear resistant ring-hammers

Based on a great number of laboratory experiments, a new technique has been developed for producing wear resistant ring-hammers. In this technology, lost foam casting with iron sand was combined to make mold; a special alloy was used to inoculate the molten steel, and proper heat treatment was used to further improve mechanical properties of wear resistant ring-hammers. The influence of this new production technology on the microstructure and mechanical properties of wear resistant ring-hammers was studied. Results show that iron sand molding, having the inherent characteristic of sand molding, changes the type of metallic compounds, refines crystal grains and increases the fineness of microstructure. Practical experience verified that the properties of the ring-hammers produced with this new technique are as follows: tensile strength (Rm) 720 MPa, impact toughness (ak) > 210 J·cm-2 and hardness > 200 HB. After water quenching from 1,080℃ (holding for 4 h) and tempering at 320℃ for 3 h, the best wear resistance is obtained, and the wear resistance is 1.6 times higher than that of common high manganese ring-hammers.

Generation Mechanism and Social Impact of Knowledge in the Era of"New Quality Productivity"

The changes in knowledge forms in the era of"new quality productivity"are closely related to the development of society.With the rise of the Internet,"the world of dataism is coming".The traditional knowledge production model is undergoing fundamental changes in structure and nature.The most prominent change is that knowledge is becoming increasingly inseparable from data networks.The collaborative production of knowledge based on the Internet is becoming increasingly common,and Wikipedia is a prominent example of this.Wikipedia makes the networked production of knowledge possible by utilizing collective intelligence and data connectivity.Wiki users are commonly referred to as"wiki".This paper conducted interviews with 30 Wiki users and used content analysis to statistically analyze the interview records,in order to study the significance and value of the Wiki knowledge production model for online users,and to glimpse the impact of the knowledge structure changes in the era of"dataism"on social change.

An Analysis of Innovative Contributions to the Important Discourse on the Development of New Quality Productivity

The discourse on developing high-quality productivity marks a significant theoretical innovation,which is conducive to the modernization and sinicization of Marxism.It refines our understanding of“new quality productivity,”defining it as an advanced form driven by innovation,embodying“high technology,efficiency,and quality,”with the aim of comprehensively enhancing productivity.It elucidates the necessity of cultivating such forces,asserting that they are crucial for achieving high-quality development,securing a leading position in global technology,and fulfilling the aspirations for a better life.Moreover,it outlines a new implementation route,emphasizing strategies such as fostering technological autonomy,nurturing emerging industries,integrating education and talent in technology,adopting a“build through challenges”approach,adjusting solutions locally,and providing categorized guidance,all of which are based on the ongoing comprehensive reforms.

Research on Mechanisms for University Connotation Construction and High-Quality Employment in the Context of New Quality Productivity

The introduction of the concept of new quality productivity has attracted a great deal of attention in the educational community.However,there is an urgent need to align it with policy orientation and advancements in science and technology moving forward.Colleges and universities themselves should be the leaders of advanced thinking and scientific and technological development,and play their due roles in line with the development of the times to provide quality and urgent talents and intellectual support.For this reason,this paper proposes that universities should consciously establish a set of regular operation mechanisms,namely,the linkage mechanism between“social demand”and“connotation construction,”and operate regularly under the guarantee of the system.This enables universities to lead or grasp the pulse of scientific and technological development,constantly improve the level of connotation construction,promote high-quality employment,and provide high-quality services for modernization and the great rejuvenation of the Chinese nation.

A Study on the Path of Promoting External Dissemination of Regional Culture with Translation Technology under the Background of New Quality Productivity

With the introduction of the concept of new quality productivity characterized by high technology,efficiency,and quality,various industries in China have ignited a high spirit of innovation and development.Against this background,this article analyzes the significance and current situation of the external dissemination of regional culture and combines the application of translation technology empowered by new quality productivity to explore a path suitable for the wider,more effective,and higher-quality external dissemination of regional culture.The aim is to provide practical experience for promoting the effective dissemination of regional culture in China to the world and better build a cultural power.

Research on Key Points of Design of Standard Plants in Modern Industrial Parks Under the Background of Promoting the Development of New Quality Productive Forces

With the progress of science and technology and the acceleration of industrialization,the modern industrial park is an important carrier of industrial development.The importance of its standard plant design has become increasingly prominent.With the development of new quality productive forces as the background,this research deeply discusses the key points of standard plant design in modern industrial parks.This paper uses literature review and case analysis to systematically analyze the important role of standard plant design in developing new quality productive forces in modern industrial parks and puts forward suggestions for optimizing design.It is found that the rationality,intelligence,and environmental protection of plant design are the key factors affecting the development of new quality productive forces.The paper summarizes the core points of modern industrial park standard plant design to provide a reference for the future development of related industries.

New production in the South China Sea——A coupled ^(228)Ra-nitrate approach

Measurement of 228Ra activities in the upper 300 m water column was conducted at two stations in the South China Sea using an MnO2-fiber extraction/β-counting technique of 228Ac. Results showed that 228Ra activities ranged from 0.38 to 3.60 Bq·m-3. The vertical profiles of 228Ra at the time-series station favored a steady state assumption. Based on a one-dimensional steady state model, 228Ra-nitrate coupled approach was applied to stations NS97-43, NS99-53 (T1), NS99-53 (T2). New production thus quantified were 4.4, 5.1 and 5.7 mmolC·m-2·d-1, respectively. f ratios in the South China Sea were estimated from the derived new production and the documented primary productivity in the regime, to be 0.12-0.15.

The depletion of nutrients and the estimation of the new production in the ice-edge of the Prydz Bay,Antarctica

The distributions and changes of nutrients in the Prydz Bay were investigated during CHINARE 6(the 6th Chinese National Antarctic Research Expedition) and CHINARE 9, and the new productions were estimated by using mass balance method. The results showed that in CHINARE 6, the depletion of NO 3 N, PO 4 P, SiO 3 Si were 1064.8, 69.2, 2196.9 mmol/m 2 ,respectively, the uptake ratios of N and Si to P were 15.3, 31.7, respectively, and new production was 992.4 mgC/(m 2·d) ; in CHINARE 9, the depletion of NO 3 N, PO 4 P were 551.9 , 41.2 mmol/m 2 , respectively, the uptake ratio of N to P was 13.4,and the new production was 390.1 mgC/(m 2·d) , indicating significant annual and/or seasonal variation. New productions were both greater than the primary production determined by 14 C trace method, demonstrating there existed rather higher new production in the Prydz Bay in austral summer. The uptake ratio of nutrients in the Prydz Bay, however, is different from the previous values obtained from the open sea, showing the regional difference of uptake and regeneration of nutrients in the Southern Ocean. Finally the annual change of new production and the characteristics of phytoplankton production were discussed.

AFFECTS OF CHINESE NEW YEAR ON PRODUCTION

With trade of over $100 billion in 2009, the importance of China and Africa bilateral exchanges are growing daily. This blooming relationship increases the need of understanding the ways of doing business.This regular column will provide a practical insight of doing business in China, including tips and advice based on experience.

Investigation Into the Market-Orientated New Product Development Performance

The effect that the market orientation brings to product innovation performance is reported and the degree of product innovativeness is explored. The interdepartmental integration inside the company is also investigated. A series of hypotheses were developed aiming at presenting a conceptual framework to clarify how market orientation contributes to product innovation performance-moderated by the degree of product innovativeness and affected by the interdepartmental integration. Survey data from 36 business units were analyzed based on the respondents in the research. The statistic results suggest a substantial positive effect of market orientation on product innovation performance. Under the condition of incremental innovativeness among the samples, the more innovative the product is, the more improvements in product innovation performance would be achieved. A variety of particular interdepartmental integration mechanisms have been certified to lend more supports to establishing market orientation and improving product innovation performance.

Exploring Barriers and Opportunities in Adopting Crowdsourcing Based New Product Development in Manufacturing SMEs

Crowdsourcing is an innovative business practice of obtaining needed services, ideas, or content or even funds by soliciting contributions from a large group of people （the ＇Crowd＇）. The potential benefits of utilizing crowdsourcing in product design are well-documented, but little research exists on what are the barriers and opportunities in adopting crowdsourcing in new product development （NPD） of manufacturing SMEs. In order to answer the above questions, a Proof of Market study is carried out on crowdsourcing-based product design under an Innovate UK funded Smart project, which aims at identifying the needs, challenges and future development opportunities associated with adopting crowdsourcing strategies for NPD. The research findings from this study are reported here and can be used to guide future development of crowdsourcing-based collaborative design methods and tools and provide some practical references for industry to adopt this new and emerging collaborative design method in their business.

Impact of the synergy between technology management and technological capability on new product development:a system dynamics approach

This paper employs system dynamics to explore how the synergy between technology management and technological capability affects new product development.The results show that the synergy between technology management and technological capability has positive impact on new product development.Moreover, the leading synergy processes between technology management and technological capability in different new product development stages are different.This paper deepens the theoretical understanding of how to achieve new product development, and also provides useful guidance for firms to implement new product development.

Effective decision-making model for hi-tech new product development

In order to identify the effective decision-making factors at the individual NPD project manager level, a new effective decision-making model has been established by introducing the concept of decision-making effectiveness, analyzing the role of expertise, and identifying the major role of expertise and insight with respect to the interfaces between a new product, an organization, customers, technologies and regulations, for the study of the effective decision-making facilitators and inhibitors for a NPD project. The analysis of the unique task conditions for individual decision-makers shows that perceived complexity, uncertainty and time pressure have their negative effect on the effective decision-making process. It is concluded that the flexible, balanced and appropriate use of rational analysis, common sense and intuition is a key effective decision-making factor, and the psychologically ‘active attitude’ of a manager is also an important factor for successful dealing with the difficult task conditions.

Riding on Tyvek?—A Case Study about How a New Material Invented by Western Multinational Company Enters China

This paper is a case study about how a new product developed by Western multinational company enters new market ?the China's Mainland. In this study, a new fabric ?DuPont's hi-technical Tyvek?PU Coating, is fashionized and developed into a new fashionable and functional casual-rainwear, using the approach of new product development method ( idea generation; screening; business analysis; development; evaluation and testing; commercialization).