期刊文献+
共找到1,385篇文章
< 1 2 70 >
每页显示 20 50 100
Effective synthesis of 5-amino-1-pentanol by reductive amination of biomass-derived 2-hydroxytetrahydropyran over supported Ni catalysts 被引量:2
1
作者 Xuemei Li Junying Tian +4 位作者 Hailong Liu Congkui Tang Chungu Xia Jing Chen Zhiwei Huang 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 北大核心 2020年第4期631-641,共11页
A highly efficient and green process was developed for the synthesis of useful 5-amino-1-pentanol(5-AP)from biomass-derived dihydropyran by coupling the in situ generation of 5-hydroxypentanal(5-HP,via the ring-openin... A highly efficient and green process was developed for the synthesis of useful 5-amino-1-pentanol(5-AP)from biomass-derived dihydropyran by coupling the in situ generation of 5-hydroxypentanal(5-HP,via the ring-opening tautomerization of 2-hydroxytetrahydropyran(2-HTHP))and its reductive amination over supported Ni catalysts.The catalytic performances of the supported Ni catalysts on different oxides including SiO2,TiO2,ZrO2,γ-Al2 O3,and MgO as well as several commercial hydrogenation catalysts were investigated.The Ni/ZrO2 catalyst presented the highest 5-AP yield.The characterization results of the oxide-supported Ni catalysts showed that the Ni/ZrO2 catalyst possessed high reducibility and a high surface acid density,which lead to the enhanced activity and selectivity of the catalyst.The effect of reaction parameters on the catalytic performance of the Ni/ZrO2 catalyst was studied,and a high 5-AP yield of 90.8%was achieved in the reductive amination of 2-HTHP aqueous solution under mild conditions of 80℃and 2 MPa H2.The stability of the Ni/ZrO2 catalyst was studied using a continuous flow reactor,and only a slight decrease in the 5-AP yield was observed after a 90-h time-on-stream.Additionally,the reaction pathways for the reductive amination of 2-HTHP to synthesize 5-AP were proposed. 展开更多
关键词 ni catalyst Reductive amination DIHYDROPYRAN 5-Amino-1-pentanol Structure-performance relationship
下载PDF
Development of Cu foam-based Ni catalyst for solar thermal reforming of methane with carbon dioxide 被引量:3
2
作者 Jianzhong Qi Yanping Sun +3 位作者 Zongli Xie Mike Collins Hao Du Tianying Xiong 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2015年第6期786-793,共8页
Using solar energy to produce syngas via the endothermic reforming of methane has been extensively inves- tigated at the laboratory- and pilot plant-scales as a promising method of storing solar energy. One of the cha... Using solar energy to produce syngas via the endothermic reforming of methane has been extensively inves- tigated at the laboratory- and pilot plant-scales as a promising method of storing solar energy. One of the challenges to scaling up this process in a tubular reformer is to improve the reactor's performance, which is limited by mass and heat transfer issues. High thermal conductivity Cu foam was therefore used as a sub-strate to improve the catalyst's thermal conductivity during solar reforming. We also developed a method to coat the foam with the catalytically active component NiMg3AlOx. The Cu foam-based NiMg3AlOx performs better than catalysts supported on SiSiC foam, which is currently used as a substrate for solar-reforming cat- alysts, at high gas hourly space velocity (≥400,000 mL/(g.h)) or at low reaction temperatures (≤ 720 ℃). The presence of a γ-Al2O3 intermediate layer improves the adhesion between the catalyst and substrate as well as the catalytic activity. 展开更多
关键词 Cu foam-based ni catalyst Monolithic catalyst Solar thermal reforming of methane
下载PDF
Modulating the CO methanation activity of Ni catalyst by nitrogen doped carbon
3
作者 Yaping Lin Pan Li +2 位作者 Tingting Cui Xiulian Pan Xinhe Bao 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2018年第3期898-902,共5页
Nitrogen doping has been proved to be an effective way to modify the properties of graphene and other carbon materials. Herein, we explore a composite with nitrogen doped carbon overlayers wrapping Si C substrate as a... Nitrogen doping has been proved to be an effective way to modify the properties of graphene and other carbon materials. Herein, we explore a composite with nitrogen doped carbon overlayers wrapping Si C substrate as a support for Ni(Ni/CN-Si C) and evaluate its effects on the methanation activity. The results show that both the activity and stability of Ni are enhanced. Characterization with STEM, XRD, XPS, Raman and H2-TPR indicates that nitrogen doping generates more defects in the carbon overlayers, which benefit the dispersion of Ni. Furthermore, the reduction of Ni is facilitated. 展开更多
关键词 CO methanation ni catalyst Carbon nitrogen doping SiC
下载PDF
Renewable hydrogen production from steam reforming of glycerol(SRG)over ceria-modified Y-alumina supported Ni catalyst 被引量:4
4
作者 Ammaru Ismaila Huanhao Chen +5 位作者 Yan Shao Shaojun Xu Yilai Jiao Xueli Chen Xin Gao Xiaolei Fan 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2020年第9期2328-2336,共9页
Excess crude glycerol derived as a by-product from biodiesel industry prompts the need to valorise glycerol to value-added chemicals.In this context,catalytic steam reforming of glycerol(SRG) was proposed as a promisi... Excess crude glycerol derived as a by-product from biodiesel industry prompts the need to valorise glycerol to value-added chemicals.In this context,catalytic steam reforming of glycerol(SRG) was proposed as a promising and sustainable alternative for producing renewable hydrogen(H2).Herein,the development of nickel(Ni) supported on ceria-modified mesoporous γ-alumina(γ-Al2 O3) catalysts and their applications in catalytic SRG(at550-750℃ atmospheric pressure and weight hourly space velocity,WHSV,of 44,122 ml·g^-1·h^-1(STP)) is presented.Properties of the developed catalysts were characterised using many technique s.The findings show that ceria modification improved Ni dispersion on γ-Al2 O3 catalyst support with highly active small Ni particles,which led to a remarkable catalytic performance with the total glycerol conversion(ca.99%),glycerol conversion into gaseous products(ca.77%) and H2 yield(ca.62%).The formation rate for H2 production(14.4 ×10^(-5)mol·s^-1·g^-1, TOF(H2)=3412 s^-1) was significantly improved with the Ni@12 Ce-Al2 O3 catalyst,representing nearly a 2-fold increase compared with that of the conventional Ni@AI2 O3 catalyst.In addition,the developed catalyst also exhibited comparatively high stability(for 12 h) and coke resistance ability. 展开更多
关键词 Steam reforming of glycerol(SRG) Hydrogen(H2) nickel(ni)catalysts CERIA Y-Alumina(γ-Al2O3)
下载PDF
Improvement of low temperature activity and stability of Ni catalysts with addition of Pt for hydrogen production via steam reforming of ethylene glycol 被引量:2
5
作者 Xingling Zhao Kai Wu +5 位作者 Weiping Liao Yingxiong Wang Xiaoning Hou Mingshan Jin Zhanghuai Suo Hui Ge 《Green Energy & Environment》 SCIE CSCD 2019年第3期300-310,共11页
Hydrogen production by steam reforming of ethylene glycol(EG) at 300℃ was investigated over SiO2 and CeO2 supported Pt–Ni bimetallic catalysts prepared by incipient wetness impregnation methods. It was observed that... Hydrogen production by steam reforming of ethylene glycol(EG) at 300℃ was investigated over SiO2 and CeO2 supported Pt–Ni bimetallic catalysts prepared by incipient wetness impregnation methods. It was observed that impregnation sequence of Pt and Ni can affect the performance of catalysts apparently. Catalyst with Pt first and then Ni addition showed higher EG conversion and H2 yield owing to the Ni enrichment on the surface and the proper interaction between Pt and Ni. It was observed that although SiO2 supported catalysts exhibited better activity and H2 selectivity, CeO2 supported ones had better stability. This is attributed to the less coke formation on CeO2. Increasing Pt/Ni ratio enhanced the reaction activity, and Pt3–Ni7 catalysts with 3 wt% Pt and 7 wt% Ni showed the highest activity and stability. Ni surficial enrichment facilitated the C-C bond rupture and water gas shift reactions;and Pt addition inhibited methanation reaction. Electron transfer and hydrogen spillover from Pt to Ni suppressed carbon deposition. These combined effects lead to the excellent performance of Pt3–Ni7 supported catalysts. 展开更多
关键词 Ethylene GLYCOL Steam REFORMING Pt–ni BIMETALLIC catalyst Hydrogen production SYNERGISTIC effect
下载PDF
Are Ni/and Ni5Fe1/biochar catalysts suitable for synthetic natural gas production?A comparison with g-Al2O3 supported catalysts 被引量:1
6
作者 M.Gonzalez-Castano C.Morales +4 位作者 J.C.Navarro de Miguel J.H.Boelte O.Klepel J.I.Flege H.Arellano-García 《Green Energy & Environment》 SCIE EI CAS CSCD 2023年第3期744-756,共13页
Among challenges implicit in the transition to the post-fossil fuel energetic model,the finite amount of resources available for the technological implementation of CO_(2) revalorizing processes arises as a central is... Among challenges implicit in the transition to the post-fossil fuel energetic model,the finite amount of resources available for the technological implementation of CO_(2) revalorizing processes arises as a central issue.The development of fully renewable catalytic systems with easier metal recovery strategies would promote the viability and sustainability of synthetic natural gas production circular routes.Taking Ni and NiFe catalysts supported over g-Al_(2)O_(3) oxide as reference materials,this work evaluates the potentiality of Ni and NiFe supported biochar catalysts for CO_(2) methanation.The development of competitive biochar catalysts was found dependent on the creation of basic sites on the catalyst surface.Displaying lower Turn Over Frequencies than Ni/Al catalyst,the absence of basic sites achieved over Ni/C catalyst was related to the depleted catalyst performances.For NiFe catalysts,analogous Ni_(5)Fe_(1) alloys were constituted over both alumina and biochar supports.The highest specific activity of the catalyst series,exhibited by the NiFe/C catalyst,was related to the development of surface basic sites along with weaker NiFe-C interactions,which resulted in increased Ni0:NiO surface populations under reaction conditions.In summary,the present work establishes biochar supports as a competitive material to consider within the future low-carbon energetic panorama. 展开更多
关键词 Biochar catalysts Carbon catalysts ni catalysts niFe alloy Bimetallic catalysts Synthetic natural gas CO_(2)methanation
下载PDF
Hydrogen production from steam reforming of biomass-derived levulinic acid over highly stable spinel-supported Ni catalysts
7
作者 Tian Li Hongcai Su +3 位作者 Lingjun Zhu Dan Xu Na Ji Shurong Wang 《Waste Disposal and Sustainable Energy》 EI CSCD 2023年第4期427-438,共12页
As one of the main oxygen-containing organic products generated from the hydrothermal conversion of biomass,levulinic acid(LA)has the potential to be further upgraded.This work investigated the steam reforming(SR)proc... As one of the main oxygen-containing organic products generated from the hydrothermal conversion of biomass,levulinic acid(LA)has the potential to be further upgraded.This work investigated the steam reforming(SR)process of biomass-derived LA to produce H_(2).A series of Ni catalysts supported by various spinels were synthesized via co-precipitation and impregnation.The Ni active metal dispersed well on the NiAl_(2)O_(4)catalyst with high specific surface area,thereby exhibiting high catalytic activity.Among all the catalysts tested,15Ni/NiAl_(2)O_(4)showed the best performance for SR of LA,resulting in high carbon conversion of 96.3%,H_(2)yield of 92.8%,and H_(2)concentration of 67.9%at a reaction temperature of 800℃.Additionally,the influences of reaction temperature,steam-to-carbon ratio(S/C),and liquid hourly space velocity(LHSV)were also examined.Moreover,during the 40-h continuous SR process of LA,the 15Ni/NiAl_(2)O_(4)catalyst maintained its outstanding catalytic activity.This study provides an encouraging route for upgrading biomass-derived LA into eco-friendly and high-value fuels,thereby advancing the sustainability of the biomass refining process. 展开更多
关键词 BIOMASS Levulinic acid Hydrogen Spinel-supported ni catalysts Steam reforming
原文传递
Ethanol steam reforming over Ni/ZSM-5 nanosheet for hydrogen production
8
作者 Porapak Suriya Shanshan Xu +8 位作者 Shengzhe Ding Sarayute Chansai Yilai Jiao Joseph Hurd Daniel Lee Yuxin Zhang Christopher Hardacre Prasert Reubroycharoen Xiaolei Fan 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2024年第3期247-256,共10页
Compared to reforming reactions using hydrocarbons,ethanol steam reforming(ESR)is a sustainable alternative for hydrogen(H_(2))production since ethanol can be produced sustainably using biomass.This work explores the ... Compared to reforming reactions using hydrocarbons,ethanol steam reforming(ESR)is a sustainable alternative for hydrogen(H_(2))production since ethanol can be produced sustainably using biomass.This work explores the catalyst design strategies for preparing the Ni supported on ZSM-5 zeolite catalysts to promote ESR.Specifically,two-dimensional ZSM-5 nanosheet and conventional ZSM-5 crystal were used as the catalyst carriers and two synthesis strategies,i.e.,in situ encapsulation and wet impregnation method,were employed to prepare the catalysts.Based on the comparative characterization of the catalysts and comparative catalytic assessments,it was found that the combination of the in situ encapsulation synthesis and the ZSM-5 nanosheet carrier was the effective strategy to develop catalysts for promoting H_(2) production via ESR due to the improved mass transfer(through the 2-D structure of ZSM-5 nanosheet)and formation of confined small Ni nanoparticles(resulted via the in situ encapsulation synthesis).In addition,the resulting ZSM-5 nanosheet supported Ni catalyst also showed high Ni dispersion and high accessibility to Ni sites by the reactants,being able to improve the activity and stability of catalysts and suppress metal sintering and coking during ESR at high reaction temperatures.Thus,the Ni supported on ZSM-5 nanosheet catalyst prepared by encapsulation showed the stable performance with~88% ethanol conversion and~65% H_(2) yield achieved during a 48-h longevity test at 550-C. 展开更多
关键词 ZSM-5 nanosheet In situ encapsulation ni catalyst Ethanol steam reforming Hydrogen production
下载PDF
碳笼负载镍基磁性催化剂Ni@Cage-C的制备与性能研究
9
作者 廖立 宋谦 +2 位作者 龙沁 赖雪飞 邓怡 《化工设计通讯》 CAS 2024年第2期104-106,共3页
以自然结晶法制备的ZIF-67为前驱体,采用包裹-刻蚀-碳化策略,得到大小均匀的纳米碳笼(Cage-C),再于液相条件下以碳笼为载体负载上活性金属镍(Ni),成功制备了非贵金属磁性催化剂Ni@Cage-C,并应用于对硝基苯酚催化还原反应以考察其多相催... 以自然结晶法制备的ZIF-67为前驱体,采用包裹-刻蚀-碳化策略,得到大小均匀的纳米碳笼(Cage-C),再于液相条件下以碳笼为载体负载上活性金属镍(Ni),成功制备了非贵金属磁性催化剂Ni@Cage-C,并应用于对硝基苯酚催化还原反应以考察其多相催化性能。结果表明:优化条件下制备的Ni@Cage-C催化剂为碳笼包裹单质镍结构,其平均颗粒大小为550 nm;将Ni@Cage-C用于对硝基苯酚催化还原反应时,催化性能明显优于参照催化剂雷尼镍(Raney-Ni)。质量反应速率常数kM为6.11 mg^(-1)·min^(-1),催化效率达到98.87%,循环反应十圈后活性仍高于初始活性的85%。 展开更多
关键词 碳笼 磁性催化剂 ni@Cage-C 对硝基苯酚
下载PDF
Pt-Pd-Ni体系相图与热力学研究进展
10
作者 胡洁琼 张巧 +3 位作者 方继恒 谢明 王宝玲 聂陟枫 《贵金属》 CAS 北大核心 2024年第S01期7-13,共7页
铂基催化剂具有活性高、选择性好、电化学稳定性佳等优点,在工业催化和燃料电池领域具有非常重要的地位。然而,由于成本较高、可用性较低限制了其实际发展。因此,有必要优化铂基催化剂的利用率,设计低成本和高稳定性的铂基催化剂。本研... 铂基催化剂具有活性高、选择性好、电化学稳定性佳等优点,在工业催化和燃料电池领域具有非常重要的地位。然而,由于成本较高、可用性较低限制了其实际发展。因此,有必要优化铂基催化剂的利用率,设计低成本和高稳定性的铂基催化剂。本研究首先介绍了在燃料电池催化剂领域具有应用前景的Pt-Pd-Ni系合金电催化剂的发展和研究现状,然后详细介绍了Pt-Pd-Ni体系的三个二元系相图与热力学评估数据和研究进展,并对Pt-Pd-Ni三元系的一些实验研究进展和今后的研究工作提出展望,对不同相结构对催化性能的影响进行了分析和讨论。通过Pt-Pd-Ni系相图和相结构等的研究将为燃料电池用新型贵金属合金催化材料的设计及工业应用奠定理论和实验基础。 展开更多
关键词 燃料电池催化剂 Pt-Pd-ni体系 合金相图 热力学 有序-无序转变
下载PDF
负载型Fe-Ni纳米合金的制备及其催化丁二烯选择性加氢性能
11
作者 严永情 王朝 +5 位作者 刘思明 连天 王伟豪 金顺敬 陈丽华 苏宝连 《石油学报(石油加工)》 EI CAS CSCD 北大核心 2024年第1期83-92,共10页
采用尿素沉积-沉淀法制备了负载型Fe-Ni纳米合金催化剂,通过调变Fe/Ni摩尔比,研究了金属组分对其还原温度、合金结构及催化丁二烯选择性加氢性能的影响。结果表明:Fe-Ni复合能有效降低Fe、Ni单金属催化剂的还原温度;随着Fe摩尔分数由0... 采用尿素沉积-沉淀法制备了负载型Fe-Ni纳米合金催化剂,通过调变Fe/Ni摩尔比,研究了金属组分对其还原温度、合金结构及催化丁二烯选择性加氢性能的影响。结果表明:Fe-Ni复合能有效降低Fe、Ni单金属催化剂的还原温度;随着Fe摩尔分数由0增加至100%,金属相结构逐渐由面心立方向体心立方结构转变;在催化加氢过程中,Fe的引入降低了Ni基催化剂活性,但丁烯选择性得到大幅提高;当Fe/Ni摩尔比为25/75时,Fe_(25)Ni_(75)/TiO_(2)-R催化剂中富Ni的Ni3Fe相在丁二烯催化活性(完全转化温度T_(100%)约95℃)和单烯烃选择性(>93%)最佳。 展开更多
关键词 非贵金属催化剂 Fe-ni合金催化剂 丁二烯 选择性加氢 低碳烯烃 活性位点
下载PDF
小晶粒NiY分子筛的合成及其加氢裂化反应性能
12
作者 孙劲晓 王晓晗 +1 位作者 魏强 周亚松 《燃料化学学报(中英文)》 EI CAS CSCD 北大核心 2024年第6期775-789,共15页
通过在小晶粒Y分子筛合成的过程中原位引入Ni源合成了一系列不同Ni掺入量的小晶粒Y-xNi分子筛,将活性金属Ni预浸渍到Y分子筛的骨架中。将Y-xNi分子筛和ASA混合物作为载体并采用等体积浸渍法负载Ni和W,制备了系列Cat-xNi加氢裂化催化剂,... 通过在小晶粒Y分子筛合成的过程中原位引入Ni源合成了一系列不同Ni掺入量的小晶粒Y-xNi分子筛,将活性金属Ni预浸渍到Y分子筛的骨架中。将Y-xNi分子筛和ASA混合物作为载体并采用等体积浸渍法负载Ni和W,制备了系列Cat-xNi加氢裂化催化剂,以正十六烷为反应物,探究其加氢裂化催化反应性能。采用扫描电子显微镜(SEM)、X射线衍射(XRD)、N2吸附-脱附、氨气程序升温脱附(NH3-TPD)、氢气程序升温还原(H2-TPR)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等表征手段分析了Ni的掺入对Y分子筛及Cat-xNi催化剂理化性质的影响。结果表明,Ni主要取代Al引入Y分子筛骨架;在Y分子筛中适量掺入Ni会提高Y分子筛的相对结晶度以及Bronsted酸和Lewis酸位点的数量,但过量的Ni掺入不利于Y分子筛的结晶。Ni的掺入削弱了金属与载体间的相互作用,提高了活性金属的硫化度及NiWS活性相的堆积数及分散度,调节了催化剂上金属中心与酸中心的匹配。催化性能评价结果显示,由于Ni改性能同时增加Br?nsted酸中心与NiWS活性中心数量,增强金属中心与酸中心之间的协同作用,因而在提高正十六烷加氢裂化活性的同时可避免其过度裂化,获得较高的中间馏分产物(C8-C12)选择性及收率。在360℃反应条件下,与Cat-0Ni催化剂相比,Cat-0.2Ni催化剂具有较高的n-C16转化率和C8-C12产物收率(达65.4%)。综上可知,采用原位合成法将活性金属Ni预浸渍在Y分子筛上可以有效调节裂化活性中心与加氢活性中心之间的平衡,从而提高其催化活性和中间馏分产物的收率。 展开更多
关键词 Y分子筛 原位ni修饰 催化剂 加氢裂化 中间馏分油
下载PDF
Ni基催化剂对苯乙酮选择加氢性能的影响
13
作者 贺友 迟姚玲 +3 位作者 董浩 林世静 李嘉璐 张谦温 《现代化工》 CAS CSCD 北大核心 2024年第7期135-138,144,共5页
以六水合硝酸镍和九水合硝酸铝为前驱体,采用共沉淀法制备了以氧化铝为载体、Ni为活性组分的催化剂粉末;经过催化剂挤条、干燥、焙烧得到相应的固体催化剂。同时采用固定床反应器对该催化剂性能进行了评价。考察了催化剂焙烧温度、反应... 以六水合硝酸镍和九水合硝酸铝为前驱体,采用共沉淀法制备了以氧化铝为载体、Ni为活性组分的催化剂粉末;经过催化剂挤条、干燥、焙烧得到相应的固体催化剂。同时采用固定床反应器对该催化剂性能进行了评价。考察了催化剂焙烧温度、反应液体空速、反应压力、反应温度对苯乙酮选择加氢的影响,并利用XRD、BET、H_(2)-TPR、压汞仪对催化剂进行表征。结果表明,催化剂焙烧温度为400℃、反应温度为70℃、反应液体空速为2.5 h^(-1)、反应压力为5 MPa时,苯乙酮转化率和α-苯乙醇的选择性均高于95%。 展开更多
关键词 苯乙酮 Α-苯乙醇 ni基催化剂 共沉淀法
下载PDF
Ni/ZrO_(2)-Al_(2)O_(3)催化剂催化沼气蒸汽重整制氢性能研究
14
作者 张中亮 刘吉 +5 位作者 马宗虎 胡锶菡 冯冰 胡斌 李凯 陆强 《低碳化学与化工》 CAS 北大核心 2024年第9期19-25,32,共8页
沼气蒸汽重整是重要的制氢方式,开发高效稳定的催化剂是其规模化应用的重要环节。基于此,采用连续浸渍法制备了一系列基于ZrO_(2)-Al_(2)O_(3)复合载体的Ni基催化剂,对其进行了沼气蒸汽重整制氢催化性能测试。利用N_(2)吸/脱附、XRD等... 沼气蒸汽重整是重要的制氢方式,开发高效稳定的催化剂是其规模化应用的重要环节。基于此,采用连续浸渍法制备了一系列基于ZrO_(2)-Al_(2)O_(3)复合载体的Ni基催化剂,对其进行了沼气蒸汽重整制氢催化性能测试。利用N_(2)吸/脱附、XRD等表征方法,分析了催化剂的织构性质、晶相组成等。探究了催化剂的物理结构和化学性质对沼气蒸汽重整制氢的影响机制,并探讨了焙烧温度与金属助剂Fe对催化剂催化性能的影响。结果表明,在700°C、空速12000 h^(-1)条件下,焙烧温度为550°C制得的Ni/ZrO_(2)-Al_(2)O_(3)表现出突出的催化性能,CH_(4)转化率和H_(2)产率分别稳定在89.94%和81.49%。ZrO_(2)-Al_(2)O_(3)复合载体相比于Al_(2)O_(3)载体增大了催化剂的比表面积,促进了平均粒径较小的Ni在载体表面的高度分散,进而提高了催化剂的催化沼气蒸汽重整制氢性能。焙烧温度可以调控催化剂的比表面积和孔体积,焙烧温度为550°C制得的Ni/ZrO_(2)-Al_(2)O_(3)的比表面积和孔体积比焙烧温度为700°C制得的Ni/ZrO_(2)-Al_(2)O_(3)大。Fe与ZrO_(2)的耦合改性提升了催化剂的还原性能,生成了更多高活性Ni^(0),有利于甲烷干重整制氢反应的发生,调控了气体产物中的n_(H_(2))/n_(CO)。 展开更多
关键词 沼气 重整制氢 ZrO_(2)-Al_(2)O_(3)复合载体 ni基催化剂
下载PDF
Ni/Al_(2)O_(3)催化十二氢-N-乙基咔唑分解的粒径效应及动力学分析
15
作者 张春颖 黄龙 +2 位作者 石沫男 马梦楠 张晨 《石油化工》 CAS CSCD 北大核心 2024年第9期1245-1250,共6页
采用浸渍法制备了不同粒径的Ni/Al_(2)O_(3)催化剂,利用XRD、H2化学吸附、N2吸附-脱附等方法对催化剂进行了表征,考察了Ni粒径和反应条件对十二氢-N-乙基咔唑(12H-NEC)脱烷基及脱氢反应性能的影响。实验结果表明,随Ni负载量的增加,Ni平... 采用浸渍法制备了不同粒径的Ni/Al_(2)O_(3)催化剂,利用XRD、H2化学吸附、N2吸附-脱附等方法对催化剂进行了表征,考察了Ni粒径和反应条件对十二氢-N-乙基咔唑(12H-NEC)脱烷基及脱氢反应性能的影响。实验结果表明,随Ni负载量的增加,Ni平均粒径逐渐增大,Ni/Al_(2)O_(3)催化剂对12H-NEC的脱氢及脱烷基活性均呈先增大后下降趋势。Ni/Al_(2)O_(3)催化剂的Ni粒径在10~70 nm范围内,Ni粒径越小越有利于12H-NEC稳定性,适宜的脱氢温度为220℃。在10Ni/Al_(2)O_(3)催化剂作用下,12H-NEC脱烷基反应为一级动力学控制,指数前因子和表观活化能分别为1.27×10^(6) h^(-1)和79.30 kJ/mol。 展开更多
关键词 N-乙基咔唑 储氢 粒径 ni催化剂 宏观动力学
下载PDF
Ni-Pt/MgAl_(2)O_(4)双金属催化剂构筑及其对不同构型烃类蒸汽重整制氢性能的影响
16
作者 张菲依 王晨臣 +6 位作者 李煜 张波 陈昱江 张琛琦 郑锦泓 焦毅 鲍泽威 《化学研究与应用》 CAS 北大核心 2024年第6期1286-1294,共9页
航空煤油成分复杂,由上百种不同构型的烃类组成,然而正构烷烃、异构烷烃、环烷烃和芳香烃这几类主要组分的构型和性质差异甚大,导致其蒸汽重整反应特性存在较大差异。本论文在前期研发Ni/MgAl_(2)O_(4)基础上,引入Pt构建Ni-Pt双金属催化... 航空煤油成分复杂,由上百种不同构型的烃类组成,然而正构烷烃、异构烷烃、环烷烃和芳香烃这几类主要组分的构型和性质差异甚大,导致其蒸汽重整反应特性存在较大差异。本论文在前期研发Ni/MgAl_(2)O_(4)基础上,引入Pt构建Ni-Pt双金属催化剂,系统考察了该催化剂对不同构型组分重整反应性能的差异,并对不同构型组分在该催化剂上的重整反应路径进行了阐述。结果表明:液相还原法引人Pt能够使双金属催化剂具有合适的酸性和良好的金属Ni分散性,Ni-Pt两种金属协同效应,不仅能够提高单Ni催化剂活性,同时能够减少Ni烧结,优化催化剂稳定性;另外,不同构型组分在双金属催化剂上的重整性能具有显著差异,其中正癸烷重整的产气率以及H,选择性较为优异。不同构型烃类燃料的反应活性为:甲基环已烷>正癸烷>乙苯。由于甲基环已烷在反应过程中C-C键键能弱,易开环形成链状自由基与水发生重整反应,乙苯具有芳香烃结构且不易开环,重整反应所需能量较高。 展开更多
关键词 燃油蒸汽重整 制氢 ni-Pt双金属催化剂 不同构型烃类 液相还原法
下载PDF
Ce改性Ni/MnO_(x)催化剂用于甲烷干重整的研究
17
作者 施冰梅 储伟 蔡国兵 《现代化工》 CAS CSCD 北大核心 2024年第7期199-204,共6页
采用氧化还原沉淀法制备了系列xCe(100-x)MnO_(x)(简记为xC(100-x)M,x分别为0、10%、30%、50%、80%、100%)复合氧化物,通过浸渍法负载Ni制备Ni/xC(100-x)M系列催化剂。以CH_(4)干重整反应制合成气为模型反应,研究Ce与Mn质量比对Ni/CeMnO... 采用氧化还原沉淀法制备了系列xCe(100-x)MnO_(x)(简记为xC(100-x)M,x分别为0、10%、30%、50%、80%、100%)复合氧化物,通过浸渍法负载Ni制备Ni/xC(100-x)M系列催化剂。以CH_(4)干重整反应制合成气为模型反应,研究Ce与Mn质量比对Ni/CeMnO_(x)催化剂活性的影响。结果表明,在Ni/MnO_(x)催化剂中引入Ce助剂,提高了催化剂的比表面积和表面碱性位点数量,改善了催化剂的还原能力。在系列Ni/CeMnO_(x)催化剂中,Ce与Mn质量比对反应活性有着显著的影响,Ce质量分数的增加有利于提高CH_(4)和CO_(2)转化率,在反应温度为700℃和V(CH_(4))/V(CO_(2))=1∶1的条件下,Ni80C20M催化剂的CH_(4)和CO_(2)转化率相对较高,CH_(4)转化率为73.90%,CO_(2)转化率为79.38%。 展开更多
关键词 甲烷干重整 合成气 ni基催化剂 Ce助剂 复合氧化物
下载PDF
Ni基催化剂用于制备生物燃料的综合实验设计
18
作者 李丹 辛慧 衣晓凤 《大学化学》 CAS 2024年第8期204-211,共8页
设计了不同晶粒尺寸的Ni纳米粒子催化剂及其制备生物燃料的综合化学实验。通过常规浸渍法制备了Ni/CeO_(2)、Ni/CeO_(2)-SiO_(2)和Ni/SiO_(2)三种纳米催化材料,借助X射线粉末衍射(XRD),X射线光电子能谱(XPS)和透射电子显微镜(TEM)等对... 设计了不同晶粒尺寸的Ni纳米粒子催化剂及其制备生物燃料的综合化学实验。通过常规浸渍法制备了Ni/CeO_(2)、Ni/CeO_(2)-SiO_(2)和Ni/SiO_(2)三种纳米催化材料,借助X射线粉末衍射(XRD),X射线光电子能谱(XPS)和透射电子显微镜(TEM)等对其进行了物理化学性质表征。通过参与催化剂合成、结构表征及其性能评价的全链条科研基本训练过程,不仅能够培养学生的综合实验技能,还能提升其科研素养,启发学生发现物质结构与性能之间内在规律,激发学生对探索未知科学领域的兴趣。该实验以“能源危机”为话题开展课程思政,加强学生对我国能源与环境危机现状的认识,引导学生从自我做起爱护环境。 展开更多
关键词 ni基催化剂 脱氧催化剂 生物燃料
下载PDF
镁含量对Ni/MgAl_(2)O_(4)催化剂甲烷干重整反应性能的影响 被引量:1
19
作者 吕帅帅 徐成 +9 位作者 张荣俊 李红伟 刘英硕 文富利 侯朝鹏 孙霞 汪天也 吴玉 徐润 夏国富 《燃料化学学报(中英文)》 EI CAS CSCD 北大核心 2024年第3期313-322,共10页
本研究采用溶剂蒸发自组装法制备了不同Mg含量的镁铝尖晶石(MgAl_(2)O_(4))载体,随后负载了金属Ni,并将该催化剂(Ni/x-MAO)应用于甲烷干重整制合成气反应。结合X射线衍射、氮气物理吸附-脱附和透射电镜等表征对催化剂的结构性质进行了分... 本研究采用溶剂蒸发自组装法制备了不同Mg含量的镁铝尖晶石(MgAl_(2)O_(4))载体,随后负载了金属Ni,并将该催化剂(Ni/x-MAO)应用于甲烷干重整制合成气反应。结合X射线衍射、氮气物理吸附-脱附和透射电镜等表征对催化剂的结构性质进行了分析,发现适量Mg的加入(10%-15%)有利于提高载体的比表面积,并形成耐高温的有序介孔结构。该结构可以将Ni颗粒限域在孔道内,有利于形成高分散、小晶粒的活性物种,其在高温反应下不易烧结。同时,H2-TPR和XPS结果表明,10%-15%的Mg含量有利于增强Ni与MgAl_(2)O_(4)的金属-载体相互作用,有效抑制Ni烧结,且其表面的活性氧物种有效抑制了积炭生成。在性能评价中,10%-15%Mg含量的Ni/MgAl_(2)O_(4)催化剂呈现出优异的CH4和CO_(2)转化率,在180 h的长周期活性评价期间,Ni/15-MAO催化剂的CH4和CO_(2)转化率分别保持在92.6%和92.5%左右,同时积炭量仅为0.89%,且反应后的Ni颗粒尺寸变化不大。 展开更多
关键词 甲烷干重整反应 有序介孔MgAl_(2)O_(4) 镍基催化剂
下载PDF
Ni/CeO_(2)@ZIF-8核壳结构催化剂的制备及其RWGS反应性能研究
20
作者 严琛 刘新辉 +1 位作者 朱学栋 杨帆 《应用化工》 CAS CSCD 北大核心 2024年第4期757-762,共6页
利用液相浓度控制成核法制备了ZIF-8包覆的Ni/CeO_(2)核壳结构催化剂,通过一系列表征技术,研究了ZIF-8壳层对催化剂物理化学性质的影响,并进一步探究引入ZIF-8对于催化剂上的RWGS反应性能与路径的影响。结果表明,ZIF-8壳层能够增大催化... 利用液相浓度控制成核法制备了ZIF-8包覆的Ni/CeO_(2)核壳结构催化剂,通过一系列表征技术,研究了ZIF-8壳层对催化剂物理化学性质的影响,并进一步探究引入ZIF-8对于催化剂上的RWGS反应性能与路径的影响。结果表明,ZIF-8壳层能够增大催化剂的比表面积,减弱加氢能力和对CO的吸附强度,在300℃,0.1 MPa,GHSV=6 L/(g·h)和CO_(2)∶H_(2)=1∶3的反应条件下,核壳结构催化剂上的CO选择性提升了60.3%。ZIF-8包覆前后的Ni基催化剂上的反应中间物种不同,生成CO的主要中间体为羧酸盐而CH_(4)则为甲酸盐,ZIF-8壳层的存在抑制了羧酸盐进一步加氢转化为甲酸盐,从而抑制了甲烷化副反应进行,提高了RWGS反应的CO选择性。 展开更多
关键词 ni基核壳结构催化剂 ZIF-8 RWGS反应 CO选择性 反应路径
下载PDF
上一页 1 2 70 下一页 到第
使用帮助 返回顶部