The microstructures and mechanical properties of Ti–47 at%Ni–3 at%Fe shape memory alloy wire under the condition of severe cold-drawing at room temperature and different postdeformation annealing processes were inte...The microstructures and mechanical properties of Ti–47 at%Ni–3 at%Fe shape memory alloy wire under the condition of severe cold-drawing at room temperature and different postdeformation annealing processes were intensively investigated using transmission electron microscope(TEM),X-ray diffraction(XRD),Vickers microhardness tester and electron tensile tester.It is indicated that the structure of the alloy evolves into a predominant amorphous structure with a trace of nanocrystalline B2 phase after the cold-drawing of 76%areal reduction.Postdeformation annealing process exerted significant influence on the microstructure and mechanical properties.Crystallization occurs when the cold-drawn wire was annealed at 300℃ for 30 min.The ultimate tensile strength and ductility as well as the superelasticity of the wire are improved significantly by cold-drawing plus postdeformation annealing.展开更多
Fine finishing of tungsten alloy is required to improve the surface quality of molds and precision instruments. Nevertheless, it is difficult to obtain high-quality surfaces as a result of grain boundary steps attribu...Fine finishing of tungsten alloy is required to improve the surface quality of molds and precision instruments. Nevertheless, it is difficult to obtain high-quality surfaces as a result of grain boundary steps attributed to differences in properties of two-phase microstructures. This paper presents a theoretical and experimental investigation on chemical mechanical polishing of W–Ni–Fe alloy. The mechanism of the boundary step generation is illustrated and a model of grain boundary step formation is proposed. The mechanism reveals the effects of mechanical and chemical actions in both surface roughness and material removal. The model was verified by the experiments and the results show that appropriately balancing the mechanical and chemical effects restrains the generation of boundary steps and leads to a fine surface quality with a high removal rate by citric acid-based slurry.展开更多
采用CALPHAD(calculation of phase diagram)方法对Fe-V和Ni-V二元系进行了热力学优化,并结合第一性原理计算,利用(A,B)_(10)(A,B)_(4)(A,B)_(16)三亚点阵模型描述σ相,首次成功地描述了σ相的占位分数。使用优化的模型参数不仅可以描述...采用CALPHAD(calculation of phase diagram)方法对Fe-V和Ni-V二元系进行了热力学优化,并结合第一性原理计算,利用(A,B)_(10)(A,B)_(4)(A,B)_(16)三亚点阵模型描述σ相,首次成功地描述了σ相的占位分数。使用优化的模型参数不仅可以描述Fe-V和Ni-V系热化学性质,而且可以很好地重现Fe-V和Ni-V系的相平衡关系,为高熵合金多组元热力学数据库的建立奠定基础。展开更多
基金supported by the National Natural Science Foundation of China (No. 50921003)Industry, Education and Research Projects of the China Aviation Industrial (No.cxy2012BH04)
文摘The microstructures and mechanical properties of Ti–47 at%Ni–3 at%Fe shape memory alloy wire under the condition of severe cold-drawing at room temperature and different postdeformation annealing processes were intensively investigated using transmission electron microscope(TEM),X-ray diffraction(XRD),Vickers microhardness tester and electron tensile tester.It is indicated that the structure of the alloy evolves into a predominant amorphous structure with a trace of nanocrystalline B2 phase after the cold-drawing of 76%areal reduction.Postdeformation annealing process exerted significant influence on the microstructure and mechanical properties.Crystallization occurs when the cold-drawn wire was annealed at 300℃ for 30 min.The ultimate tensile strength and ductility as well as the superelasticity of the wire are improved significantly by cold-drawing plus postdeformation annealing.
基金supported by National Key Research and Development Program (No. 2018YFA0702900)National Natural Science Foundation of China (No. 51975096)+1 种基金Science Challenge Project (No. TZ2018006-0101-01)Liao Ning Revitalization Talents Program (No. XLYC1807230)。
文摘Fine finishing of tungsten alloy is required to improve the surface quality of molds and precision instruments. Nevertheless, it is difficult to obtain high-quality surfaces as a result of grain boundary steps attributed to differences in properties of two-phase microstructures. This paper presents a theoretical and experimental investigation on chemical mechanical polishing of W–Ni–Fe alloy. The mechanism of the boundary step generation is illustrated and a model of grain boundary step formation is proposed. The mechanism reveals the effects of mechanical and chemical actions in both surface roughness and material removal. The model was verified by the experiments and the results show that appropriately balancing the mechanical and chemical effects restrains the generation of boundary steps and leads to a fine surface quality with a high removal rate by citric acid-based slurry.
文摘采用CALPHAD(calculation of phase diagram)方法对Fe-V和Ni-V二元系进行了热力学优化,并结合第一性原理计算,利用(A,B)_(10)(A,B)_(4)(A,B)_(16)三亚点阵模型描述σ相,首次成功地描述了σ相的占位分数。使用优化的模型参数不仅可以描述Fe-V和Ni-V系热化学性质,而且可以很好地重现Fe-V和Ni-V系的相平衡关系,为高熵合金多组元热力学数据库的建立奠定基础。
