To separate the cadmium and nickel resources in waste Ni-Cd batteries, aself-designed vacuum distillation recycling system was studied under laboratory conditions. Theeffects of system temperature, operating pressure,...To separate the cadmium and nickel resources in waste Ni-Cd batteries, aself-designed vacuum distillation recycling system was studied under laboratory conditions. Theeffects of system temperature, operating pressure, and time on the separation of Ni and Cd werestudied respectively. The mechanism of vacuum thermal recycling was also discussed. Results showthat vacuum distillation is a very effective separation method for waste Ni-Cd batteries. At aconstant pressure, the increase of temperature can improve the separating efficiency of Cd. When thetemperature is 1 173 K, cadmium can evaporate completely from the samples during 3 h at 10 Pa. Thereduction of pressure in a certain range is effective to the separating of Cd from Ni-Cd batteriesby vacuum distillation.展开更多
Recovery of Ni-Cd batteries was studied by a self-designed vacuum-aided recovering system under laboratory conditions. The fundamental research on a process of disassembling and recovering selected materials from Ni-C...Recovery of Ni-Cd batteries was studied by a self-designed vacuum-aided recovering system under laboratory conditions. The fundamental research on a process of disassembling and recovering selected materials from Ni-Cd batterieswas conducted. The impacts of temperature, pressure and time were studied respectively. The mechanism of vacuum thermal recovering was also discussed. The results show that: Ni-Cd batteries can be recovered effectively byvacuum-aided recovering system at 573~1173 K. At constant pressure, the increase of temperature can improve theseparating efficiency of cadmium. When the temperature is 1173 K, the cadmium can evaporate completely fromthe residue during 3 h at 10 Pa. The reduction of pressure in the certain range is effective to separate cadmium byvacuum distillation. Distillation time is a very important factor affecting separation of cadmium.展开更多
High temperature vaccum evaporation is a recycling technology that includes a selective material recovering process. The fundamental research on a process of disassembling and recovering selected materials from Ni Cd ...High temperature vaccum evaporation is a recycling technology that includes a selective material recovering process. The fundamental research on a process of disassembling and recovering selected materials from Ni Cd batteries was conducted using self designed experimental apparatus. An effective recycling technology based on the evaporation phenomenon of batteries and the elements of cadmium under the laboratory condition was studied. The results show that: (1)Ni/Cd can be effectively recovered by vacuum distillation at appropriate temperature, pressure and time, and high purity cadmium (>99%) can be obtained through the process; (2)the effective distillatory temperature should be at the range of 5731 173 K; (3)the higher the evaporation temperature, the lower the purity of cadmium in condensate展开更多
Biohydrometallurgy is a novel method to recycle discarded batteries,in which sewage sludge is used as microorganisms and culture due to the presence of indigenous Thiobacilli.A two-step continuous flow leaching system...Biohydrometallurgy is a novel method to recycle discarded batteries,in which sewage sludge is used as microorganisms and culture due to the presence of indigenous Thiobacilli.A two-step continuous flow leaching system consisting of an acidifying reactor and a leaching reactor was introduced to achieve the bioleaching of spent nickel-cadmium(Ni-Cd)batteries.The acid supernatant produced in the acidifying reactor by the microorganisms with ferrous ions as the substrate was conducted into the leaching reactor to dissolve electrode materials.The efficiency of a batch treatment of batteries was examined.The results showed that the complete dissolution of two AA-sized Ni-Cd batteries with 0.6 L/d acid supernatant took about 30,20,and 35 days for Ni,Cd,and Co,respectively.But the dissolution ability of the three metals was different.Cd and Co can be leached mostly for pH below 4.0 while the complete dissolution of Ni can be achieved for pH below 2.5.Meanwhile,a strain(named Thiooxidans.WL)accounting for the reduction of pH in the acidified sludge was isolated and sequenced.It was identified to be 100%similar to Acidithiobacillus ferrooxidans strain Tf-49 based on 16S rDNA sequence analysis.The relevant phylogenetic tree constructed indicates that the strain should be classified into genus Acidithiobacillus ferrooxidans.展开更多
如何通过在线监测的直接测量参数准确估计电池荷电状态(State of Charge,SOC)与健康状态(State of Health,SOH),是蓄电池管理系统建立的核心与关键。设计的SOC估算方法为镉镍蓄电池管理系统有效地监测蓄电池组性能状态和寿命状态提供基...如何通过在线监测的直接测量参数准确估计电池荷电状态(State of Charge,SOC)与健康状态(State of Health,SOH),是蓄电池管理系统建立的核心与关键。设计的SOC估算方法为镉镍蓄电池管理系统有效地监测蓄电池组性能状态和寿命状态提供基础,有助于动车组在运行过程中的安全预警;同时,为蓄电池检修与维护策略优化提供数据支撑,助力国家可持续发展战略。从蓄电池不同寿命阶段内的充电起始电压序列中提取出可描述当前最大容量的潜在特征,通过F检验(F-Test)与主成分分析(Principal Component Analysis,PCA)进行特征筛选与特征融合,获得蓄电池健康状态指标;由充放电循环试验中采集到的不同寿命阶段内的放电终止电压建立镉镍蓄电池“记忆效应”的近似表达函数;基于此,采用基于Bagging的随机森林构建放电过程中蓄电池两端电压与SOC间的关联模型,可在蓄电池放电过程中实现基于放电电压的SOC估算。最终,试验结果显示:通过SOC估算值与实际测量值的对比,得到模型均方根误差(Mean Square Error,MSE)和平均绝对误差百分比(Mean Absolute Percentage Error,MAPE)分别为0.1486和0.8112%,证明了所提出的SOC估算模型取得了较高的估算精度与较强的鲁棒性,为在线监测镉镍蓄电池SOC提供基础。展开更多
文摘To separate the cadmium and nickel resources in waste Ni-Cd batteries, aself-designed vacuum distillation recycling system was studied under laboratory conditions. Theeffects of system temperature, operating pressure, and time on the separation of Ni and Cd werestudied respectively. The mechanism of vacuum thermal recycling was also discussed. Results showthat vacuum distillation is a very effective separation method for waste Ni-Cd batteries. At aconstant pressure, the increase of temperature can improve the separating efficiency of Cd. When thetemperature is 1 173 K, cadmium can evaporate completely from the samples during 3 h at 10 Pa. Thereduction of pressure in a certain range is effective to the separating of Cd from Ni-Cd batteriesby vacuum distillation.
文摘Recovery of Ni-Cd batteries was studied by a self-designed vacuum-aided recovering system under laboratory conditions. The fundamental research on a process of disassembling and recovering selected materials from Ni-Cd batterieswas conducted. The impacts of temperature, pressure and time were studied respectively. The mechanism of vacuum thermal recovering was also discussed. The results show that: Ni-Cd batteries can be recovered effectively byvacuum-aided recovering system at 573~1173 K. At constant pressure, the increase of temperature can improve theseparating efficiency of cadmium. When the temperature is 1173 K, the cadmium can evaporate completely fromthe residue during 3 h at 10 Pa. The reduction of pressure in the certain range is effective to separate cadmium byvacuum distillation. Distillation time is a very important factor affecting separation of cadmium.
文摘High temperature vaccum evaporation is a recycling technology that includes a selective material recovering process. The fundamental research on a process of disassembling and recovering selected materials from Ni Cd batteries was conducted using self designed experimental apparatus. An effective recycling technology based on the evaporation phenomenon of batteries and the elements of cadmium under the laboratory condition was studied. The results show that: (1)Ni/Cd can be effectively recovered by vacuum distillation at appropriate temperature, pressure and time, and high purity cadmium (>99%) can be obtained through the process; (2)the effective distillatory temperature should be at the range of 5731 173 K; (3)the higher the evaporation temperature, the lower the purity of cadmium in condensate
基金This work was supported by the National Natural Science Foundation of China(Grant No.20477027).
文摘Biohydrometallurgy is a novel method to recycle discarded batteries,in which sewage sludge is used as microorganisms and culture due to the presence of indigenous Thiobacilli.A two-step continuous flow leaching system consisting of an acidifying reactor and a leaching reactor was introduced to achieve the bioleaching of spent nickel-cadmium(Ni-Cd)batteries.The acid supernatant produced in the acidifying reactor by the microorganisms with ferrous ions as the substrate was conducted into the leaching reactor to dissolve electrode materials.The efficiency of a batch treatment of batteries was examined.The results showed that the complete dissolution of two AA-sized Ni-Cd batteries with 0.6 L/d acid supernatant took about 30,20,and 35 days for Ni,Cd,and Co,respectively.But the dissolution ability of the three metals was different.Cd and Co can be leached mostly for pH below 4.0 while the complete dissolution of Ni can be achieved for pH below 2.5.Meanwhile,a strain(named Thiooxidans.WL)accounting for the reduction of pH in the acidified sludge was isolated and sequenced.It was identified to be 100%similar to Acidithiobacillus ferrooxidans strain Tf-49 based on 16S rDNA sequence analysis.The relevant phylogenetic tree constructed indicates that the strain should be classified into genus Acidithiobacillus ferrooxidans.