To improve oil quality,ZSM-22/SAPO-11 composite molecular sieves were synthesized by adding ZSM-22 into a synthetic gel of SAPO-11 for n-decane hydroisomerization.The mass ratios of ZSM-22/(ZSM-22+SAPO-11)in the compo...To improve oil quality,ZSM-22/SAPO-11 composite molecular sieves were synthesized by adding ZSM-22 into a synthetic gel of SAPO-11 for n-decane hydroisomerization.The mass ratios of ZSM-22/(ZSM-22+SAPO-11)in the composite molecular sieves were optimized and the optimal ZSM-22/SAPO-11 composite(ZS-9)was obtained.The electrostatic repulsions between the ZSM-22 precursors and the SAPO-11 crystalline nuclei produced small ZSM-22 and SAPO-11 crystallites in ZS-9,which increased the specific surface area and mesopore volume and thereby exposed more acid sites.In comparison with conventional SAPO-11,ZSM-22 and their mechanical mixture,ZS-9 with smaller crystallites and the optimal medium and strong Brønsted acid centers(MSBAC)content displayed a higher yield of branched C_(10) isomers(81.6%),lower cracking selectivity(11.9%)and excellent stability.The correlation between the i-C_(10) selectivity and the MSBAC density of molecular sieves indicated that the selectivity for branched C_(10) isomers first increased and then decreased with increasing MSBAC density on the molecular sieves,and the maximum selectivity(87.7%)occurred with a density of 9.6×10^(−2)μmol m^(−2).展开更多
Zinc-modified Pt/SAPO-11 catalysts were prepared by incipient wetness impregnation and assessed in the hydroisomerization of n-octane.Their physicochemical properties were investigated using powder X-ray diffraction,s...Zinc-modified Pt/SAPO-11 catalysts were prepared by incipient wetness impregnation and assessed in the hydroisomerization of n-octane.Their physicochemical properties were investigated using powder X-ray diffraction,scanning electron microscopy,nitrogen adsorption-desorption,pyridine-adsorbed infrared spectroscopy,temperature-programmed desorption of NH3,temperature-programmed reduction of hydrogen,temperature-programmed desorption of hydrogen,transmission electron microscopy,and X-ray photoelectron spectroscopy.The addition of zinc resulted in high dispersion of platinum.Zinc acted as a competitive adsorbent,changed the location of platinum.The catalyst with a zinc loading of 0.5%gave the highest selectivity to dimethylhexanes,but the conversion was lower than those achieved with the other catalysts.Dimethylhexanes have large molecular diameters,and therefore their diffusion may be difficult.This weakens the catalytic activity of the zinc-modified catalysts and lowers the n-octane conversion.展开更多
基金The authors gratefully acknowledge the financial support of Science Foundation of China University of Petroleum,Beijing(Grant No.KYJJ2012-03-03).
文摘To improve oil quality,ZSM-22/SAPO-11 composite molecular sieves were synthesized by adding ZSM-22 into a synthetic gel of SAPO-11 for n-decane hydroisomerization.The mass ratios of ZSM-22/(ZSM-22+SAPO-11)in the composite molecular sieves were optimized and the optimal ZSM-22/SAPO-11 composite(ZS-9)was obtained.The electrostatic repulsions between the ZSM-22 precursors and the SAPO-11 crystalline nuclei produced small ZSM-22 and SAPO-11 crystallites in ZS-9,which increased the specific surface area and mesopore volume and thereby exposed more acid sites.In comparison with conventional SAPO-11,ZSM-22 and their mechanical mixture,ZS-9 with smaller crystallites and the optimal medium and strong Brønsted acid centers(MSBAC)content displayed a higher yield of branched C_(10) isomers(81.6%),lower cracking selectivity(11.9%)and excellent stability.The correlation between the i-C_(10) selectivity and the MSBAC density of molecular sieves indicated that the selectivity for branched C_(10) isomers first increased and then decreased with increasing MSBAC density on the molecular sieves,and the maximum selectivity(87.7%)occurred with a density of 9.6×10^(−2)μmol m^(−2).
基金supported by the National Natural Science Foundation of China(21676300)~~
文摘Zinc-modified Pt/SAPO-11 catalysts were prepared by incipient wetness impregnation and assessed in the hydroisomerization of n-octane.Their physicochemical properties were investigated using powder X-ray diffraction,scanning electron microscopy,nitrogen adsorption-desorption,pyridine-adsorbed infrared spectroscopy,temperature-programmed desorption of NH3,temperature-programmed reduction of hydrogen,temperature-programmed desorption of hydrogen,transmission electron microscopy,and X-ray photoelectron spectroscopy.The addition of zinc resulted in high dispersion of platinum.Zinc acted as a competitive adsorbent,changed the location of platinum.The catalyst with a zinc loading of 0.5%gave the highest selectivity to dimethylhexanes,but the conversion was lower than those achieved with the other catalysts.Dimethylhexanes have large molecular diameters,and therefore their diffusion may be difficult.This weakens the catalytic activity of the zinc-modified catalysts and lowers the n-octane conversion.
