A polymetallic layer is usually developed at the bottom of the early Cambrian black shale in Guizhou Province.The mineral that makes up the polymetallic layer is related to the sedimentary facies.To analyze the differ...A polymetallic layer is usually developed at the bottom of the early Cambrian black shale in Guizhou Province.The mineral that makes up the polymetallic layer is related to the sedimentary facies.To analyze the differentiation mechanism between polymetallic deposits(Ni-Mo and V),the Zhijin Gezhongwu profile located in the outer shelf and the Sansui Haishan V deposit located in the lower slope are selected to study the in situ sulfur isotopes and trace elements of pyrite.The results show that δ^(34)S values of pyrite vary widely from−7.8‰to 28‰in the Gezhongwu profile,while the δ^(34)S values are relatively uniform(from 27.8‰to 38.4‰)in the Haishan profile.The isotopic S composition is consistent with the transition that occurs in the sedimentary phase from the shelf to the deep sea on the transgressive Yangtze platform;this indicates that the δ^(34)SO_(4)^(2−)values in seawater must be differently distributed in depositional environments.The sulfur in the Ni-Mo layer is produced after the mixing of seawater and hydrothermal fluid,while the V layer mainly originates from seawater.Overall,the Ni-Mo and V deposits have been differentiated primarily on the basis of the combined effect of continental weathering and hydrothermal fluid.展开更多
The black shales of the Lower Cambrian Niutitang Formation in Weng＇an, on the Yangtze platform of south China, contain voluminous polymetallic sulfide deposits. A comprehensive geochemical investigation of trace, rar...The black shales of the Lower Cambrian Niutitang Formation in Weng＇an, on the Yangtze platform of south China, contain voluminous polymetallic sulfide deposits. A comprehensive geochemical investigation of trace, rare earth, and platinum group elements （PGE） has been undertaken in order to discuss its ore genesis and correlation with the tectono-depositional setting. The ore-bearing layers enrich molybdenum （Mo）, nickel （Ni）, vanadium （V）, lead （Pb）, strontium （Sr）, barium （Ba）, uranium （U）, arsenic （As）, and rare earth elements （REE） in abundance. High uranium/ thorium （U/Th） ratios （U/Th〉I） indicated that mineralization was mainly influenced by the hydrothermal process. The 8U value was above 1.9, showing a reducing sedimentary condition. The REE patterns showed high enrichment in light rare earth elements （LREE） （heavy rare earth elements （HREE） （LREE/HREE=5-17）, slightly negative europium （Eu） and cerium （Ce） anomalies （δEu=0.81- 0.93）, and positive Ce anomalies （δCe=0.76-1.12）. PGE abundance was characterized by the PGE-type distribution patterns, enriching platinum （Pt）, palladium （Pd）, ruthenium （Ru） and osmium （Os）. The Pt/Pd ratio was 0.8, which is close to the ratios of seawater and ultramafic rocks. All of these geochemical features suggest that the mineralization was triggered by hydrothermal activity in an extensional setting in the context of break-up of the Rodinian supercontinent.展开更多
To understand the catalytic conversion of lignin into high-value products,lignin depolymerization was performed using a layered polymetallic oxide(CuMgAlO_(x))catalyst.The effects of the conversion temperature,hydroge...To understand the catalytic conversion of lignin into high-value products,lignin depolymerization was performed using a layered polymetallic oxide(CuMgAlO_(x))catalyst.The effects of the conversion temperature,hydrogen pressure,and reaction time were studied,and the ability of CuMgAlO_(x)to break the C–O bond was evaluated.The CuMgAlO_(x)(Mg/Al=3:1)catalyst contained acidic sites and had a relatively homogeneous elemental distribution with a high pore size and specific surface area.Theβ-O-4 was almost completely converted by disassociating the C–O bond,resulting in yields of 14.74%ethylbenzene,47.58%α-methylphenyl ethanol,and 36.43%phenol.The highest yield of lignin-derived monophenols was 85.16%under reaction conditions of 280℃ and 3 Mpa for 4 h.As the reaction progressed,depolymerization and condensation reactions occurred simultaneously.Higher temperatures(>280℃)and pressures(>3 Mpa)tended to produce solid char.This study establishes guidelines for the high-value application of industrial lignin in the catalytic conversion of polymetallic oxides.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42272103,92062221,42063009,U1812402)the Guizhou Provincial Science and Technology Projects(Grant No.Qiankehejichu–ZK[2022]common 213)the Higher Education Scientific Research Projects of the Education Department of Guizhou Province(Grant No.Qianjiaoji[2022]157).
文摘A polymetallic layer is usually developed at the bottom of the early Cambrian black shale in Guizhou Province.The mineral that makes up the polymetallic layer is related to the sedimentary facies.To analyze the differentiation mechanism between polymetallic deposits(Ni-Mo and V),the Zhijin Gezhongwu profile located in the outer shelf and the Sansui Haishan V deposit located in the lower slope are selected to study the in situ sulfur isotopes and trace elements of pyrite.The results show that δ^(34)S values of pyrite vary widely from−7.8‰to 28‰in the Gezhongwu profile,while the δ^(34)S values are relatively uniform(from 27.8‰to 38.4‰)in the Haishan profile.The isotopic S composition is consistent with the transition that occurs in the sedimentary phase from the shelf to the deep sea on the transgressive Yangtze platform;this indicates that the δ^(34)SO_(4)^(2−)values in seawater must be differently distributed in depositional environments.The sulfur in the Ni-Mo layer is produced after the mixing of seawater and hydrothermal fluid,while the V layer mainly originates from seawater.Overall,the Ni-Mo and V deposits have been differentiated primarily on the basis of the combined effect of continental weathering and hydrothermal fluid.
基金supported by grants from the Key Projectof Chinese Ministry of Education(no.:104004)the National Natural Science Foundation of China(no.:40839907)
文摘The black shales of the Lower Cambrian Niutitang Formation in Weng＇an, on the Yangtze platform of south China, contain voluminous polymetallic sulfide deposits. A comprehensive geochemical investigation of trace, rare earth, and platinum group elements （PGE） has been undertaken in order to discuss its ore genesis and correlation with the tectono-depositional setting. The ore-bearing layers enrich molybdenum （Mo）, nickel （Ni）, vanadium （V）, lead （Pb）, strontium （Sr）, barium （Ba）, uranium （U）, arsenic （As）, and rare earth elements （REE） in abundance. High uranium/ thorium （U/Th） ratios （U/Th〉I） indicated that mineralization was mainly influenced by the hydrothermal process. The 8U value was above 1.9, showing a reducing sedimentary condition. The REE patterns showed high enrichment in light rare earth elements （LREE） （heavy rare earth elements （HREE） （LREE/HREE=5-17）, slightly negative europium （Eu） and cerium （Ce） anomalies （δEu=0.81- 0.93）, and positive Ce anomalies （δCe=0.76-1.12）. PGE abundance was characterized by the PGE-type distribution patterns, enriching platinum （Pt）, palladium （Pd）, ruthenium （Ru） and osmium （Os）. The Pt/Pd ratio was 0.8, which is close to the ratios of seawater and ultramafic rocks. All of these geochemical features suggest that the mineralization was triggered by hydrothermal activity in an extensional setting in the context of break-up of the Rodinian supercontinent.
基金supported by the National Natural Science Fund for Distinguished Young Scholars(52125601).
文摘To understand the catalytic conversion of lignin into high-value products,lignin depolymerization was performed using a layered polymetallic oxide(CuMgAlO_(x))catalyst.The effects of the conversion temperature,hydrogen pressure,and reaction time were studied,and the ability of CuMgAlO_(x)to break the C–O bond was evaluated.The CuMgAlO_(x)(Mg/Al=3:1)catalyst contained acidic sites and had a relatively homogeneous elemental distribution with a high pore size and specific surface area.Theβ-O-4 was almost completely converted by disassociating the C–O bond,resulting in yields of 14.74%ethylbenzene,47.58%α-methylphenyl ethanol,and 36.43%phenol.The highest yield of lignin-derived monophenols was 85.16%under reaction conditions of 280℃ and 3 Mpa for 4 h.As the reaction progressed,depolymerization and condensation reactions occurred simultaneously.Higher temperatures(>280℃)and pressures(>3 Mpa)tended to produce solid char.This study establishes guidelines for the high-value application of industrial lignin in the catalytic conversion of polymetallic oxides.
