The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The...The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The results show that cerium dioxide can modify the microstructure and tribological properties of the coating. Model LIC-23 composite coating which contains CeO_2 performs well as a self-lubricating coating in hydrochloric acid solution.展开更多
The hardness and wear resistance of sprayed FeBSi coating after laser remelting were much improved by addition of 8 wt-% CeO_2.Microstructural observation on the FeBSi+CeO_2 coating revealed that the formation of mart...The hardness and wear resistance of sprayed FeBSi coating after laser remelting were much improved by addition of 8 wt-% CeO_2.Microstructural observation on the FeBSi+CeO_2 coating revealed that the formation of martensite occurs,as well as the refined grains and the more eutectic and compounds with regular morphology are dis- tributed.While the FeBSi coating free from CeO_2 is a sharp constrast in microstructure.展开更多
A simple electrodeposition technique was used to prepare Ni-CeOnanorods composite coating(Ni-CeONRs) using Watt’s nickel plating bath containing CeOnanorods(NRs) as the reinforcement phase under optimized process con...A simple electrodeposition technique was used to prepare Ni-CeOnanorods composite coating(Ni-CeONRs) using Watt’s nickel plating bath containing CeOnanorods(NRs) as the reinforcement phase under optimized process conditions. The X-ray diffraction analysis(XRD) was used for the structural analysis of Ni-CeONRs composite coatings and their average crystalline size is ~22 nm for pure Ni and ~18 nm,respectively. The crystalline structure is fcc for the Ni-CeOnanocomposite coatings. The surface morphology of the electrodeposited Ni-CeONRs composite coatings was analyzed by scanning electron microscopy(SEM). Microhardness of pure Ni and Ni-CeONRs composite coatings are found to be 253 HV and 824 HV, respectively. The inclusion of CeONRs increases the microhardness of Ni-CeONRs composite coatings. The corrosion resistance behavior of Ni-CeONRs composite coating was evaluated by Tafel polarization and AC impedance methods. It is revealed that CeONRs reinforced Ni matrix shows higher microhardness and corrosion resistance than existing reported electrodeposited pure Ni and CeOnanoparticles reinforced Ni coatings.展开更多
In current work,Ni-Ti-CeO_(2) nanocomposite coatings were achieved by co-adding Ti microparticles and CeO_(2) nanoparticles.Designed experiments and COMSOL computer simulation were applied to reveal the synergistic ro...In current work,Ni-Ti-CeO_(2) nanocomposite coatings were achieved by co-adding Ti microparticles and CeO_(2) nanoparticles.Designed experiments and COMSOL computer simulation were applied to reveal the synergistic role of Ti microparticles and CeO_(2) nanoparticles in tailoring the spatial microstructures and properties of Ni-Ti-CeO_(2) nanocomposite coating.Unilaterally,the conductive Ti microparticles conducted the growth behavior of Ni grains by current density concentration,distorting electronic feld lines and heterogeneous nucleation.Individual domains consisting of inner nanograins and outer radial columnar grains surrounded Ti microparticles,where Ti microparticles acted as seeds.Ti microparticles tended to be aggregated,leading to spatial heterogeneity of microstructures.Ni deposits buried the Ti microparticles in forms of“covering model”,contributing to the formation of inside voids and rough surface and aggregation of Ti microparticles;on the other hand,the non-conductive CeO_(2)microparticles hardly changed the distribution of current density and electronic feld lines on the cathode surface.Ni deposits buried the CeO_(2)microparticle in forms of“stacking model”,avoiding the inside voids and aggregation of particles.The incorporation of CeO_(2)microparticle brought in microstructure evolutions only on its top side without disturbing the growth behavior of Ni grains on its lateral side or bottom,suggesting the limited effects.This was correlated with the presence of current concentration above the CeO_(2) microparticle at the last stage of burying CeO_(2) microparticle.The co-addition of Ti microparticles and CeO_(2) nanoparticles into Ni deposits exploited the complementary action of the two particles,which gave birth to satisfed spatial microstructures and improved hardness.Ti microparticles took major responsibility for microstructure evolutions,while the CeO_(2) nanoparticles were mainly in charge of the microstructure homogeneity.展开更多
基金This is supported by the Youth Research Fund of Chinese Academy of Sciences
文摘The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The results show that cerium dioxide can modify the microstructure and tribological properties of the coating. Model LIC-23 composite coating which contains CeO_2 performs well as a self-lubricating coating in hydrochloric acid solution.
文摘The hardness and wear resistance of sprayed FeBSi coating after laser remelting were much improved by addition of 8 wt-% CeO_2.Microstructural observation on the FeBSi+CeO_2 coating revealed that the formation of martensite occurs,as well as the refined grains and the more eutectic and compounds with regular morphology are dis- tributed.While the FeBSi coating free from CeO_2 is a sharp constrast in microstructure.
基金Project supported by UGC-DAE Consortium for Scientific Research,Indore-452 017,India(CSR-KN/CRS-47/2013-14/647)
文摘A simple electrodeposition technique was used to prepare Ni-CeOnanorods composite coating(Ni-CeONRs) using Watt’s nickel plating bath containing CeOnanorods(NRs) as the reinforcement phase under optimized process conditions. The X-ray diffraction analysis(XRD) was used for the structural analysis of Ni-CeONRs composite coatings and their average crystalline size is ~22 nm for pure Ni and ~18 nm,respectively. The crystalline structure is fcc for the Ni-CeOnanocomposite coatings. The surface morphology of the electrodeposited Ni-CeONRs composite coatings was analyzed by scanning electron microscopy(SEM). Microhardness of pure Ni and Ni-CeONRs composite coatings are found to be 253 HV and 824 HV, respectively. The inclusion of CeONRs increases the microhardness of Ni-CeONRs composite coatings. The corrosion resistance behavior of Ni-CeONRs composite coating was evaluated by Tafel polarization and AC impedance methods. It is revealed that CeONRs reinforced Ni matrix shows higher microhardness and corrosion resistance than existing reported electrodeposited pure Ni and CeOnanoparticles reinforced Ni coatings.
文摘In current work,Ni-Ti-CeO_(2) nanocomposite coatings were achieved by co-adding Ti microparticles and CeO_(2) nanoparticles.Designed experiments and COMSOL computer simulation were applied to reveal the synergistic role of Ti microparticles and CeO_(2) nanoparticles in tailoring the spatial microstructures and properties of Ni-Ti-CeO_(2) nanocomposite coating.Unilaterally,the conductive Ti microparticles conducted the growth behavior of Ni grains by current density concentration,distorting electronic feld lines and heterogeneous nucleation.Individual domains consisting of inner nanograins and outer radial columnar grains surrounded Ti microparticles,where Ti microparticles acted as seeds.Ti microparticles tended to be aggregated,leading to spatial heterogeneity of microstructures.Ni deposits buried the Ti microparticles in forms of“covering model”,contributing to the formation of inside voids and rough surface and aggregation of Ti microparticles;on the other hand,the non-conductive CeO_(2)microparticles hardly changed the distribution of current density and electronic feld lines on the cathode surface.Ni deposits buried the CeO_(2)microparticle in forms of“stacking model”,avoiding the inside voids and aggregation of particles.The incorporation of CeO_(2)microparticle brought in microstructure evolutions only on its top side without disturbing the growth behavior of Ni grains on its lateral side or bottom,suggesting the limited effects.This was correlated with the presence of current concentration above the CeO_(2) microparticle at the last stage of burying CeO_(2) microparticle.The co-addition of Ti microparticles and CeO_(2) nanoparticles into Ni deposits exploited the complementary action of the two particles,which gave birth to satisfed spatial microstructures and improved hardness.Ti microparticles took major responsibility for microstructure evolutions,while the CeO_(2) nanoparticles were mainly in charge of the microstructure homogeneity.