The ternary Ni–Al–Co embedded-atom-method potential for γ/γ Ni-based single-crystal superalloys: Construction and application

An Ni-AI-Co system embedded-atom-method potential is constructed for the γ（Ni）/γ＇（Ni3A1） superalloy based on experiments and first-principles calculations. The stacking fault energies （SFEs） of the Ni（Co, A1） random solid solutions are calculated as a function of the concentrations of Co and A1. The calculated SFEs decrease with increasing concentrations of Co and A1, which is consistent with the experimental results. The embedding energy term in the present potential has an important influence on the SFEs of the random solid solutions. The cross-slip processes of a screw dislocation in homogenous Ni（Co） solid solutions are simulated using the present potential and the nudged elastic band method. The cross-slip activation energies increase with increasing Co concentration, which implies that the creep resistance of γ（Ni） may be improved by the addition of Co.

Molecular dynamics study of mosaic structure in the Ni-based single-crystal superalloy

The mosaic structure in a Ni-based single-crystal superalloy is simulated by molecular dynamics using a potential employed in a modified analytic embedded atom method. From the calculated results we find that a closed threedimensional misfit dislocation network, with index of （011）{100} and the side length of the mesh 89.6A, is formed around a cuboidal γ′ precipitate. Comparing the simulation results of the different mosaic models, we find that the side length of the mesh only depends on the lattice parameters of the γ and γ′ phases as well as the γ/γ′ interface direction, but is independent of the size and number of the cuboidal γ′ precipitate. The density of dislocations is inversely proportional to the size of the cuboidal γ′ precipitate, i.e. the amount of the dislocation is proportional to the total area of the γ/γ′ interface, which may be used to explain the relation between the amount of the fine γ′ particles and the creep rupture life of the superalloy. In addition, the closed three-dimensional networks assembled with the misfit dislocations can play a significant role in improving the mechanical properties of superalloys.

Influence of platform position on stray grain nucleation in Ni-based single-crystal dummy blade clusters

Stray grains are the most severe of the solidification defects that occur in the industrial single-crystal blade preparation process.In this study,a single-crystal dummy blade cluster with different crystal orientations controlled by the seeding method was prepared,and the influence of the position of the circular platform(relative to the sample and furnace body)on stray grain nucleation was investigated.Results show that the microstructure of the circular platforms could be divided into the center,expansion,and stray grain regions.The inside of the circular platform facing the center of the cluster is more prone to stray grain formation than the outside of the circular platform facing the furnace body.With an increase in the distance between the circular platform and the bottom of the dummy blade cluster,the stray grain region expands,whereas the expansion region narrows.The stray grain is slightly aggravated with increase of the misorientation.Finally,the mechanism underlying the influence of platform position on the formation of stray grains in single-crystal dummy blade clusters is discussed based on the temperature evolution during directional solidification.

Morphology and chemical composition of γ/γ' phases in Re-containing Ni-based single crystal superalloy during two-step aging

The γ/γ＇ microstructure of a Re-containing Ni-based single crystal super alloy after a two-step aging was studied using scanning electron microscopy （SEM）,transmission electron microscopy （TEM） and scanning transmission electron microscopy （STEM）.The crystals were grown by the floating zone （FZ） method.Both cuboidal and spherical γ＇ precipitates were formed after a two-step aging.The size of the cuboidal γ＇ phases first increased and then decreased with the extension of the second-step aging time.Re,Co and Cr strongly concentrated in the γ phase whereas Ni and Al enriched in the γ＇ phase.Thermodynamic calculation by JMatPro was performed to explain the experimental observations.

Effect of bonding parameters on microstructures and properties during TLP bonding of Ni-based super alloy

Ni-based alloy was transient liquid phase bonded using a BNi-2 interlayer. The effect of bonding parameters on the microstructures and mechanical properties of the joints was investigated. With the increase of bonding temperature or time, the number of Ni-rich and Cr-rich borides and the grain size of precipitation zone decrease. Higher bonding temperature or longer bonding time is beneficial to the diffusion of melting point depressant elements （B and Si） from the PZ to the base metal and atomic interdiffusion between the base metal and the joint. The chemical composition and microstructure of the joints bonded at 1170 ℃ for 24 h are comparable to the base metal. The shear test results show that both the room and elevated temperature shear-strengths of the joints increase with increasing bonding time. However, the effect of bonding time on elevated temperature tensile-shear strength is greater than on room temperature tensile-shear strength.

Microstructure and shear strength of reactive brazing joints of TiAl/Ni-based alloy

Reactive brazing of TiAl-based intermetallics and Ni-based alloy with Ti foil as interlayer was investigated. The interfacial microstructure and shear strength of the joints were studied. According to the experimental observations, the molten interlayer reacts vigorously with base metals, forming several continuous reaction layers. The typical interfacial microstructure of the joint can be expressed as GH99/（Ni,Cr）ss（γ）/TiNi（β2）＋TiNi2Al（τ4）＋Ti2Ni（δ）/δ＋Ti3Al（α2）＋Al3NiTi2（τ3）/α2＋τ3/TiAl. The maximum shear strength is 258 MPa for the specimen brazed at 1000°C for 10 min. Higher brazing temperature or longer brazing time causes coarsening of the phases in the brazing seam and formation of brittle intermetallic layer, which greatly depresses the shear strength of the joints.

Tribological properties of nanostructured Al_2O_3-40%TiO_2 multiphase ceramic particles reinforced Ni-based alloy composite coatings

The Ni-based alloy composite coatings reinforced by nanostructured Al2O3-40%TiO2 multiphase ceramic particles were prepared on the surface of 7005 aluminum alloy by plasma spray technology. The microstructure and tribological properties of the composite coatings were researched. The results show that the composite coatings mainly consist of γ-Ni, α-Al2O3, γ-Al2O3 and rutile-TiO2 etc, and exhibit lower friction coefficients and wear losses than the Ni-based alloy coatings at different loads and speeds. The composite coating bears low contact stress at 3 N and its wear mechanism is micro-cutting wear. As loads increase to 6-12 N, the contact stress is higher than the elastic limit stress of worn surface, and the wear mechanisms change into multi-plastic deformation wear, micro-brittle fracture wear and abrasive wear. With the increase of speeds, the contact temperature of worn surface increases. The composite coating experiences multi-plastic deformation wear, fatigue wear and adhesive wear.

Microstructure and creep properties of Ni-based single-crystal superalloys with Mo/Al addition at 760℃/850 MPa

The effect of Mo and Al addition on the microstructure as well as creep rupture properties at760.C/850 MPa was investigated by transmission electron microscopy(TEM)in a Ni-based single-crystal(SC)alloy with the composition of Ni-6.5Al-8.0Mo-2.4Cr-6.2Ta-4.9Co-1.5Re-(0.01-0.05)Y(wt%).The microstructure analysis shows that 0.5 wt%Al addition induces rapid decrease in creep rupture life,and this can be attributed to the formation of dense stacking faults cutting intoγ'precipitates,which can be explained by the increase in Orowan stress caused by the narrowerγchannel width and the decrease in stacking faults energy.Besides,1.5 wt%Mo addition increases the anti-phase boundary energy and decreases the stacking faults energy,resulting in fewer stacking faults and thus a slight decrease in the creep rupture life.

Molecular Dynamics Simulations of Displacement Cascade in Ni-Based Concentrated Solid Solution Alloys

Single-phase concentrated solid solution alloys(SP-CSAs),including high-entropy alloys,have received extensive attention due to their excellent irradiation resistance.In this work,displacement cascade simulations are conducted using the molecular dynamics method to study the evolution of defects in Ni-based SP-CSAs.Compared with pure Ni,the NiCr,NiCo,and NiCu alloys exhibit a larger number of Frankel pairs(FPs)in the thermal peak stage,but a smaller number of surviving FPs.However,the NiFe alloy displays the opposite phenomenon.To explain these different observations for NiFe and other alloys,the formation energy and migration energy of interstitials/vacancies are calculated.In the NiFe alloy,both the formation energy and migration energy barrier are higher.On the other hand,in NiCr and other alloys,the formation energy of interstitials/vacancies is lower,as is the migration energy barrier of interstitials.The energy analysis agrees well with previous observations.The present work provides new insights into the mechanism behind the irradiation resistance of binary Ni-based SP-CSAs.

Effect of Rare Earth on Microstructure of Vacuum Melting Ni-Based Self-Fluxing Alloy Coatings

The Ni-based self-fluxing alloy coating containing RE was acquired by the technique of vacuum melting on the hypoeutectoid steel (Fe-0.45%C) matrix. By X-ray diffraction, SEM and EDX, the microstructure and phase structure of section of coating and the microstructure near the interface between coating and matrix were investigated, and the effect of RE on microstructure of coating was also discussed. The results show that the microstructure of the NiCrBSi alloy coating is composed of Ni-based solid solution and a lot of massive, globular and needle secondary phases CrB, Ni_3B, Cr_7C_3, Cr_(23)C_6 among the solid solution. The metallurgical binding between steel matrix and coating is realized. RE makes needle phase of alloy coating vanish. New phases of NiB and Cr_(6.5)Ni_(2.5)Si are precipitated from alloy coating, and secondary phases of alloy coating are sphericized. Consequently, RE also hinders the diffusion of Ni, Cr and Si atoms from coating to matrix and Fe atoms from matrix to coating, holds back the dilution of Fe for NiCrBSi alloy coating, and assures the chemical composition of the alloy coating.

Transformation mechanism of secondary phase and its effect on intergranular corrosion in laser wire filling welding Ni-based alloy/304 stainless steel

To clarify the transformation mechanism of secondary phase and the mechanism of intergranular corrosion in laser welding Ni-based alloy (Hastelloy C-276)/304 stainless steel with filler wire,the secondary phase was analyzed by electron probe micro-analysis (EPMA) and transmission electron microscopy (TEM).The evaluation of intergranular corrosion resistance of the welded joints was conducted by double-loop electrochemical potentiokinetic reactivation(DL-EPR) method,and at the same time the chemical compositions of the corrosion surface were analyzed by energy-dispersive spectrometry (EDS).The results show that p phase has complete coherence relationship withμphase,and the coherent relationship is described as[001]p//■and[430]p//[0001]μ.Theμphase is rapidly transformed from p phase,which is the inhomogeneous phase transformation.The transformation of secondary phase will increase the susceptibility to intergranular corrosion.Therefore,the transformation of secondary phase should be avoided in the welding process.

Microstructure and Wear Resistance of in situ NbC Particles Reinforced Ni-based Alloy Composite Coating by Laser Cladding

The in situ synthesized NbC particles reinforced Ni-based alloy composite coating was produced by laser cladding a precursor mixture of Ni-based alloy powder, graphite and niobium powders on a steel substrate. The microstructure, phase composition and wear property of the composite coating were investigated by means of scanning electron microscopy （SEM）, X-ray diffraction （XRD） and dry sliding wear test. The experiment results show that the composite coating is homogeneous and free from cracks, and about 0.8 mm thick. The microstructure of the composite coating is mainly composed of NbC particles, CrB type chromium borides, 7-Ni primary dendrites, and interdendritic eutectics. CrB phases often nucleate and grow on the surface of NbC particles or in their close vicinity. NbC particles are formed via in situ reaction between niobium and graphite in the molten pool during the laser cladding process and they are commonly precipitated in three kinds of morphologies, such as quadrangle, cluster, and flower-like shape. Compared with the pure Ni- based alloy coating, the microhardness of the composite coating is increased about 38%, giving a high average hardness of HV0.21000, and the wear rate of the composite coating is decreased by about 32%, respectively. These are attributed to the presence of in situ synthesized NbC particles and their well distribution in the coating.

GRAIN REFINEMENT IN BULK UNDERCOOLED Ni-BASED ALLOY

Fluxing of 5 g bulk melt Ni77Si13B10 permits high undercoolings to be attained prior to nu-cleation onset.Investigations of grain refinement in the bulk undercooled alloy as a function ofundercooling,recalescence behavior and cooling rate have been reported.A significant inhomo-geneity of reduction in grain size of a bulk sample is observed,which is caused by the different so-lidification conditions:(1)recalescence process,and(2)the followed plateau in which the heatrelease and extraction rates are equal.It is concluded that the homogeneous refined microstructurecan be achieved if the initial undercooling prior to nucleation,or cooling rate after recalescence isfurther increased.

Fabrication of in-situ synthesized ceramic reinforced Ni-based alloy composite coatings by reactive braze coating processing

In-situ synthesized ceramic such as TiC,Cr7C3 and Cr5B3 reinforced Ni-based alloy composite coating was fabricated on the surface of mild steel substrate by reactive braze coating processing with colloidal graphite,Cr,Ni,ferro-boron,Si and titanium powders as the raw materials at low temperature of 1000℃,and a new kind of coating materials was developed.By means of SEM,EDS,XRD and surface hardness tester,the microstructures,phases,hardness and wear-resistance of the coating were analyzed,respectively.The results revealed that the coating was mainly composed of the ceramic in-situ synthesized reinforcement phases of TiC,Cr7C3 and Cr5B3 and the binder phases in-situ synthesized of Ni31Si12 and(Ni,Fe)solid solution;The ceramic reinforcement phases of TiC,Cr7C3 and Cr5B3 were randomly distributed in the binder phases of Ni31Si12 and(Ni,Fe)solid solution;The coating had about 15vol%pores and can possibly be applied as a self-lubrication coating;The coating and the substrate were integrated together by metallurgical bonding;The coating had a hardness up to 91-94HR15N.

Effect of molybdenum on the microstructure and corrosive wear resistance of laser clad Ni-based coatings

Five kinds of Ni-based coatings with 0 wt% , 2. 5 wt% , 5.0 wt% , 7.5 wt% and 10. 0 wt% molybdenum were prepared on 45CrNi steel plates by using laser cladding technique. The effect of Mo on the microstructure of Ni-based coatings was investigated by using scanning electron microscopy. The corrosive wear resistance and the corrosion resistance of five coatings were tested. The results show that the corrosive wear resistance of the coating with 5.0 wt% Mo is better than those of other coatings. During the corrosive wear process, the corrosion and wear effects are combined. The corrosive wear resistance is closely related to the microstructure of the coating.

Solidification behavior of Re-and Ru-containing Ni-based single-crystal superalloys with thermal and metallographic analysis

To clarify the solidification behavior of Re- and Ru-containing Ni-based single-crystal superalloys, four experimental alloys with varied contents of Re and Ru were investigated by differential scanning calorimetry （DSC） and metallographic techniques. To obtain the - solvus temperatures, the stepwise solution and aging heat treatments were used. DSC analysis shows that Re leads to the increase in freezing range and γ-solvus temperature. On the contrast, Ru only has negligible influence on the freezing range, but leads to the lower γ-solvus temperature. In comparison with Ru, Re leads to more severe segregation and higher eutectic fractions in as-cast microstructures. Furthermore, the castability and phase stability of Ni-based superalloys were analyzed by the results of DSC and metallographic analysis, such as freezing range, critical nucleation temperature, γ-solvus temperature and eutectic fractions. It shows that Re leads to the wider freezing range and lower critical nucleation temperature, indicating the worse castability of Re-con- taining Ni-based single-crystal superalloys.

Microstructure and bonding strength of Ni-based alloy coating

A Ni-Cr-B-Si coating technique was developed and successfully applied on austenite grey iron substrate in a conventional resistance furnace under graphite powder protection. The microstructure, phase distribution, chemical composition profile and microhardness along the coating layer depth were investigated. Shear strength of the coating was also tested. Microanalysis shows that the coating is consist of γ-Ni solution and γ-Ni+Ni3B lamellar eutectic, as well as small amount of Cr5B3 particles. Diffusion induced metallurgical bonding occurs at the coating/substrate interfaces, and the higher the temperature, the more sufficient elements diffused, the broader interfusion region and the larger bonding strength, but it has an optimum value. And the bonding strength at the interface can be enable to reach 250-270 MPa, which is nearly the same as that of processed by flame spray. The microhardness along the coating layer depth shows a gradient distribution manner.

Laser cladding of Ni-based alloy on stainless steel

The coatings on a stainless steel substrate were conducted by laser cladding of Ni-based alloy, using a 5 kW continuous wave CO2 flow transverse laser. SEM, EDX and X-ray diffraction were used to analyze the microstructure and constituent phases of the obtained coatings by laser cladding with direct injection of the powder into the melt pool. Solidification planar, cellular and dendrite structures were observed in Ni-based alloy coating. There exists an optimum metallurgical bond between Ni-based laser cladding layer and the base material. The high hardness of the Ni-based alloy coating is attributed to the presence of M7C3-type carbides (essentially chromium-riched carbide) dispersed in the γ(Ni,Fe) phase matrix.

STRENGTH-DUCTILITY AND γ'PRECIPITATES IN Ni-BASE ALLOYS

The critical diameter of γ'-phase(dc) is an important microstructural characteristic.Relationships among the critical diameter(dc).the volume fraciton(f),the antiphase domain boundaryγenergy(APBE) ofγ'-phase and the shear modulus(G) of precipitation strengthening Ni-base alloys have been studied in this paper.The results show that the alloys have the strongest age-hardening effects but the lowest ductility corresponding to the critical size of γ'-phase.The impact ductility of the alloys relates to γ'precipitation induced volume distortion in the matrix.

Effects of Salt Quenching Temperatures on Microstructure and Creep Properties of a PM Ni-based Superalloy

By means of the microstructure observation and creep properties measurement, an investigation has been made into the influence of the salt quenching temperatures on the microstructure and creep property of FGH95 superalloy. The results shown that, after full heat treatment, a high volume of g￠ phase and some granular carbide dispersedly precipitate in the matrix. Thereinto, as the molten salt temperature decreases from 650℃to520℃, the size of fine g￠ phase in the alloy decrease gradually and the amount of carbides increase in the alloy. And the alloy quenched in molten salt at520℃possesses better creep resistance due to the fact that there are more granular carbides precipitating in the alloy to enhance the grain strength. During creep, the deformation features of the alloy are that the configurations of stacking fault and slipping dislocations are activated in the alloy.