Design of multifunctional polymeric binders in silicon anodes for lithium‐ion batteries

Silicon(Si)is a promising anode material for lithium‐ion batteries(LIBs)owing to its tremendously high theoretical storage capacity(4200 mAh g−1),which has the potential to elevate the energy of LIBs.However,Si anodes exhibit severe volume change during lithiation/delithiation processes,resulting in anode pulverization and delamination with detrimental growth of solid electrolyte interface layers.As a result,the cycling stability of Si anodes is insufficient for commercialization in LIBs.Polymeric binders can play critical roles in Si anodes by affecting their cycling stability,although they occupy a small portion of the electrodes.This review introduces crucial factors influencing polymeric binders'properties and the electrochemical performance of Si anodes.In particular,we emphasize the structure–property relationships of binders in the context of molecular design strategy,functional groups,types of interactions,and functionalities of binders.Furthermore,binders with additional functionalities,such as electrical conductivity and self‐healability,are extensively discussed,with an emphasis on the binder design principle.

产前超声诊断Binder综合征

Binder综合征是罕见的先天性面中部发育畸形[1],发病率约1/18000[2]。三维超声具有立体成像、动态可视化等优点,能实时、动态观察胎儿颜面部结构,已广泛应用于临床。本研究观察产前超声诊断Binder综合征的价值。1资料与方法1.1研究对象收集2019年10月—2022年10月于甘肃省妇幼保健院经产前超声诊断为Binder综合征的7胎胎儿,均为单胎,孕周22~24周、平均(22.9±0.7)周;孕妇年龄26~36岁、平均(30.0±3.3)岁,其中1名孕期有环境毒害物(甲醛)接触史,1名有孕早期服药史(布洛芬),1名孕期从事美甲工作并频繁接触甲醇、乙醛等化学溶剂。本研究经院伦理委员会批准[(2021)GSFY伦审[47]号];孕妇及其家属均知情同意。

Silk fibroin-based biopolymer composite binders with gradient binding energy and strong adhesion force for high-performance micro-sized silicon anodes

Micro-sized silicon anodes have shown much promise in large-scale industrial production of high-energy lithium batteries.However,large volume change(>300%)of silicon anodes causes severe particle pulverization and the formation of unstable solid electrolyte interphases during cycling,leading to rapid capacity decay and short cycle life of lithium-ion batteries.When addressing such issues,binder plays key roles in obtaining good structural integrity of silicon anodes.Herein,we report a biopolymer composite binder composed of rigid poly(acrylic acid)(PAA)and flexible silk fibroin(SF)tailored for micro-sized silicon anodes.The PAA/SF binder shows robust gradient binding energy via chemical interactions between carboxyl and amide groups,which can effectively accommodate large volume change of silicon.This PAA/SF binder also shows much stronger adhesion force and improved binding towards high-surface/defective carbon additives,resulting in better electrochemical stability and higher coulombic efficiency,than conventional PAA binder.As such,micro-sized silicon/carbon anodes fabricated with novel PAA/SF binder exhibit much better cyclability(up to 500 cycles at 0.5 C)and enhanced rate capability compared with conventional PAA-based anodes.This work provides new insights into the design of functional binders for high-capacity electrodes suffering from large volume change for the development of nextgeneration lithium batteries.

Rational Design of Robust and Universal Aqueous Binders to Enable Highly Stable Cyclability of High-Capacity Conversion and Alloy-Type Anodes

The development of high-performance binders is a simple but effective approach to address the rapid capacity decay of high-capacity anodes caused by large volume change upon lithiation/delithiation.Herein,we demonstrate a unique organic/inorganic hybrid binder system that enables an efficient in situ crosslinking of aqueous binders(e.g.,sodium alginate(SA)and carboxymethyl cellulose(CMC))by reacting with an inorganic crosslinker(sodium metaborate hydrate(SMH))upon vacuum drying.The resultant 3D interconnected networks endow the binders with strong adhesion and outstanding self-healing capability,which effectively improve the electrode integrity by preventing fracturing and exfoliation during cycling and facilitate Li^(+)ion transfer.SiO anodes fabricated from the commercial microsized powders with the SA/0.2SMH binder maintain 1470 mAh g^(-1)of specific capacity at 100 mA g^(-1)after 200 cycles,which is 5 times higher than that fabricated with SA binder alone(293 mAh g^(-1)).Nearly,no capacity loss was observed over 500 cycles when limiting discharge capacity at 1500 mAh g^(-1).The new binders also dramatically improved the performance of Fe_(2)O_(3),Fe_(3)O_(4),NiO,and Si electrodes,indicating the excellent applicability.This finding represents a novel strategy in developing high-performance aqueous binders and improves the prospect of using high-capacity anode materials in Li-ion batteries.

Optimization of Animal-Glue Binders for Casting Applications

In typical metal foundry applications,sand casting is still the most used technology.The related binder plays a very important role as its performances can directly influence the quality of castings.Among many binders,glues of animal origin have attracted much attention in recent years due to their reduced environmental impact.How-ever,they display some drawbacks such as the tendency to coagulate easily at room temperature and a relatively low strength.In this study,a novel gas-hardening casting binder was prepared using an animal glue and anhy-drous potassium carbonate as a hydrolyzing agent to avoid undesired agglomeration.Moreover,sodium pyropho-sphate and furfuryl alcohol were exploited as modifiers to obtain a binder with a high compressive strength.The best modification conditions,determined by means of an orthogonal design matrix approach,were 4 g of Na2CO3,sodium pyrophosphate,furfuryl alcohol and animal glue with a ratio of 4:12:100,at 85°C and with a duration of 115 min,respectively.The viscosity of the mixture obtained under these optimized conditions was 1250 mPa⋅s.The compressive strength of the binder,hardened by CO_(2) gas,was 4.00 MPa.Its gas evolution at 850°C was 15 ml⋅g-1,and its residual strength after 10 min calculation at 800°C was 0.01 MPa,which is high enough to meet the requirement of core-making in foundry.Moreover,after hydrolysis and further modification,animal glue and modifiers displayed a grafting reaction and an esterification reaction,respectively,which made the adhesive network denser and improved its thermal stability.

Constructing high-toughness polyimide binder with robust polarity and ion-conductive mechanisms ensuring long-term operational stability of silicon-based anodes

Silicon-based materials have demonstrated remarkable potential in high-energy-density batteries owing to their high theoretical capacity.However,the significant volume expansion of silicon seriously hinders its utilization as a lithium-ion anode.Herein,a functionalized high-toughness polyimide(PDMI) is synthesized by copolymerizing the 4,4'-Oxydiphthalic anhydride(ODPA) with 4,4'-oxydianiline(ODA),2,3-diaminobenzoic acid(DABA),and 1,3-bis(3-aminopropyl)-tetramethyl disiloxane(DMS).The combination of rigid benzene rings and flexible oxygen groups(-O-) in the PDMI molecular chain via a rigidness/softness coupling mechanism contributes to high toughness.The plentiful polar carboxyl(-COOH) groups establish robust bonding strength.Rapid ionic transport is achieved by incorporating the flexible siloxane segment(Si-O-Si),which imparts high molecular chain motility and augments free volume holes to facilitate lithium-ion transport(9.8 × 10^(-10) cm^(2) s^(-1) vs.16 × 10^(-10) cm^(2) s~(-1)).As expected,the SiO_x@PDMI-1.5 electrode delivers brilliant long-term cycle performance with a remarkable capacity retention of 85% over 500 cycles at 1.3 A g^(-1).The well-designed functionalized polyimide also significantly enhances the electrochemical properties of Si nanoparticles electrode.Meanwhile,the assembled SiO_x@PDMI-1.5/NCM811 full cell delivers a high retention of 80% after 100 cycles.The perspective of the binder design strategy based on polyimide modification delivers a novel path toward high-capacity electrodes for high-energy-density batteries.

High energy density in ultra-thick and flexible electrodes enabled by designed conductive agent/binder composite

Thick electrodes can increase incorporation of active electrode materials by diminishing the proportion of inactive constituents,improving the overall energy density of batteries.However,thick electrodes fabricated using the conventional slurry casting approach frequently exhibit an exacerbated accumulation of carbon additives and binders on their surfaces,invariably leading to compromised electrochemical properties.In this study,we introduce a designed conductive agent/binder composite synthesized from carbon nanotube and polytetrafluoroethylene.This agent/binder composite facilitates production of dry-process-prepared ultra-thick electrodes endowed with a three-dimensional and uniformly distributed percolative architecture,ensuring superior electronic conductivity and remarkable mechanical resilience.Using this approach,ultra-thick LiCoO_(2)(LCO) electrodes demonstrated superior cycling performance and rate capabilities,registering an impressive loading capacity of up to 101.4 mg/cm^(2),signifying a 242% increase in battery energy density.In another analytical endeavor,time-of-flight secondary ion mass spectroscopy was used to clarify the distribution of cathode electrolyte interphase(CEI) in cycled LCO electrodes.The results provide unprecedented evidence explaining the intricate correlation between CEI generation and carbon distribution,highlighting the intrinsic advantages of the proposed dry-process approach in fine-tu ning the CEI,with excellent cycling performance in batteries equipped with ultra-thick electrodes.

Dry Mix Slag—High-Calcium Fly Ash Binder. Part Two: Durability

This work investigates durability of cement-free mortars with a binder comprised of ground granulated blast furnace slag (GGBFS) activated by high-calcium fly ash (HCFA) and sodium carbonate (Na2CO3): the soundness, sulfate resistance, alkali-silica reactivity and efflorescence factors are considered. Results of tests show that such mortars are resistant to alkali-silica expansion. Mortars are also sulfate-resistant when the amount of HCFA in the complex binder is within a limit of 10 wt%. The fineness of fly ash determines its’ ability to activate GGBFS hydration, and influence soundness of the binder, early strength development, sulfate resistance and efflorescence behavior. The present article is a continuation of authors’ work, previously published in MSA, Vol. 14, 240-254.

急性重症胰腺炎Binders并发症评分与护理对策

目的：探讨急性重症胰腺炎（SAP）Binders并发症评分与护理对策。方法：通过112例SAP回顾调查，了解SAP器官并发症或代谢并发症Binders并发症评分和病死率关系，探讨SAP护理工作应对措施。结果：SAP 112例，治愈92例（82．1％）；死亡20例，病死率为17．9％。SAP器官或代谢并发症综合评分≥7分组和＜7分组，两组病死率有非常显著差异（P＜0．01）。与病死率有关的并发症为全腹膜炎、休克、ARDS和胰性脑病，分别占病死率的14．3％、7．8％、6．3％和5．3％。结论：SAP患者死亡原因不是SAP，而是其并发症，Binders并发症评分与病死率有密切关系。全腹膜炎、休克、ARDS和胰性脑病是影响病死率的主要因素，护理重点是针对SAP原发病，防治致死性并发症以降低病死率。

Self Healing Capacity of Asphalt Binders

To test self healing capability of asphalt binders,three asphalt specimens（pure asphalt,modified asphalt and aged asphalt） were prepared.Every specimen was tested by dynamic shear rheometer（DSR）.The temperature sweeps result indicates that both aging and SBS modifying influence the self healing capability of asphalt binder.The fatigue-heal-fatigue test was introduced to study the self healing capability of asphalt in its serving periods.Furthermore,three different periods（0.5 h,1 h,3 h） were set up to study the influence of rest time on fatigue time.It is concluded that longer rest time,less load will delay the appearance of cracks and extend the service life of asphalt binders.

Characterization of zirconia-based slurries with different binders for titanium investment casting

The materials and physical properties of primary slurry are crucial to the surface quality of the finished castings,especially for high reactivity titanium alloys.The aim of this study is to investigate the influence of different binders on the physical properties of primary slurry for titanium alloy investment casting.The zirconia-based slurries with different binders were evaluated by comparing the parameters:viscosity,bulk density,plate weight, suspensibility,gel velocity and strength.The results indicate that a higher viscosity of binder leads to a higher viscosity and suspensibility of slurry with the same powder/binder ratio.The retention rate and thickness of primary layer increase with an increase in the viscosity of the slurry,and a higher retention rate is associated with a thicker primary layer.The gel velocity of the slurry is correlated with the gel velocity of the binder.The green strength and the baked strength of the primary layer are determined by the properties of the binder after gel and by the production of the binder after fired,respectively.

Experimental evaluation on high temperature rheological properties of various fiber modified asphalt binders

High temperature rheological properties of fiber modified asphalt binders and impact of the type and content on such properties were studied.Three types of fiber,including polyester(PET),polyacrylonitrile(PAN) and cellulose(CEL),a control content(0%) and four levels of fiber content(2%,4%,6% and 8% by total asphalt binder mass) were used with asphalt binders.The high temperature rheological properties,consisting of complex modulus(G*) and phase angle δ,were measured using SHRP's dynamic shear rheometer(DSR) between 46-82 ℃.Experimental results indicate that the changes of G* and tan δ of fiber modified asphalt binders with the increase of test temperature tend to slow down,and the temperature susceptibility is improved obviously compared to that of original asphalt binder.Fiber modification results in the increase of rutting parameter(G*/sin δ) at high temperatures,the decrease of temperature susceptibility,and further improved high temperature performance of asphalt binder.An excellent correlation exhibits between fiber content and high temperature performance of asphalt binder.Moreover,fiber type also has different influences on the improvement of G*/sin δ,G*/sin δ of PET and PAN fiber asphalt binders are both higher than that of CEL fiber,but G*/sin δ of CEL fiber is still higher than that of original asphalt.However,there is a critical fiber content when fibers start to interact with each other.Therefore,based on the critical fiber content and economic consideration,the optimum fiber contents for various fiber-modified asphalt binders are obtained.

Properties of diamond tool binders with fine carbonyl Ni powder additions

Fine Ni powder is often added to Co and bronze-based metal binder powders for diamond tool segments.Ni is a lower cost substitute for extra-fine Co powder and increases the toughness of Co-Fe diamond binders at the expense of lower hardness and bend strength.In bronze-based diamond binder segments,Ni increases hardness and yield strength.Several grades of Ni powder are used commercially with both Co and bronze-based diamond binders.This paper compares properties of diamond binders containing carbonyl Ni powders including standard Inco(?) T255,T123 PM and T 110 PM.Binder materials were made by ball milling or dry mixing of the fine carbonyl Ni and Fe powders with either XF Co or air atomized bronze(90/10 Cu/Sn) powders.Co-based powder blends were hot pressed at 20～35 MPa and 700℃to 900℃.Bronze-based powder blends were cold pressed and sintered at 840℃.Apparent density,apparent hardness and bend strength(TRS) were compared for different binder compositions and processing conditions.

Effects of water-based binders on electrochemical performance of manganese dioxide cathode in mild aqueous zinc batteries

In the majority of rechargeable batteries including lithium-ion batteries,polyvinylidene fluoride(PVdF)binders are the most commonly used binder for both anode and cathode.However,using PVdF binder requires the organic solvent of N-methyl-2-pyrrolidone which is expensive,volatile,combustible,toxic,and has poor recyclability.Therefore,switching to aqueous electrode processing routes with non-toxic binders would provide a great leap forward towards the realization of ideally fully sustainable and environmentally friendly electrochemical energy storage devices.Various water-soluble binders(aqueous binders)were characterized and compared to the performance of conventional PVdF.Our study demonstrates that the electrochemical performance of Zn/MnO_(2) aqueous batteries is significantly improved by using sodium carboxymethyl cellulose(CMC)binder.In addition,CMC binders offer desirable adhesion,good wettability,homogeneous material distribution,and strong chemical stability at certain pH levels(3.5-5)without any decomposition for long-cycle life.

An overview of the characteristics of advanced binders for high-performance Li–S batteries

The lithium-sulfur battery(Li–S)is a promising energy storage system with many advantages over the commercialized lithium-ion battery.It has a high theoretical capacity of 1675 mAh gà1,a high theoretical energy density(2600 Wh kgà1),and is eco-environmentally friendly.Although only a small amount is used(<10 wt%)in the electrode,binders may affect the discharge capacity and cycling stability of sulfur cathodes in the Li–S battery.In recent years,tremendous efforts have been made to develop functional binders with robust adhesive strength,fast ion/electron transportation,strong anchoring of lithium polysulfide(LiPS),and rapid redox kinetics,to improve capacity,coulombic efficiency,and energy density.This article reviews recent developments in binders for the Li–S battery.After briefly introducing the fundamentals of the Li–S battery,the desireable characteristics of binders are discussed based on the correlation between the functions of the binder molecules and the performance of the battery.Future challenges in developing promising binders and potential solutions are provided in the conclusion.

Use of the Newly Synthesized Aqueous Polyurethane Acrylate Binders for Printing Cotton and Polyester Fabrics

The use of the four new synthesized polyurethane acrylate binders in the pigment print paste for screen printing cotton and polyester fabrics and pigment fixation through the polymerization process of the binder by using the thermofixation technique as well as the UV curing technique was studied. The effect of changing time and temperature of thermofixation, and the time of UV curing on the color strength, and prints fastness properties were also studied. The results showed that, the newly synthesized polyurethane acrylate binders could be successfully used for pigment fixation on cotton and polyester using the two fixation techniques and in general their prints possessed better color strength values as compared to those obtained upon using the selected commercial binders.

Comparison between Pigment Printing Systems with Acrylate and Butadiene Based Binders

Pigment printing was carried out on lab scale by simple screen-printing techniques. By the application of acrylate and butadiene based binder, the crocking fastness, formaldehyde release and PVC migration of fabric printed with Imparon red KB pigment was evaluated. The effect of curing time on K/S values was also investigated. It has been found that butadiene based binder shows good performance in terms of crocking fastness, formaldehyde release and PVC migra-tion. It has also been observed that by increasing the binder concentration, the release of formaldehyde decreased and by increasing the curing time, the K/S values of printed fabric were decreased.

Microstructure Morphologies of Asphalt Binders using Atomic Force Microscopy

We investigated microstructure morphologies of three asphalts（SK, Karamay, and Esso） used in China using atomic force microscopy（AFM）. The topography and phase contrast images were obtained. Topographic profile and three dimensional images were described. Roughnesses of microstructure were calculated. And the chemical compositions of asphalt were tested to explain the microstructural mechanism of the asphalt. The results show that the topography and phase image in atomic force microscopy are appropriate to evaluate the microstructure of the asphalt binder. There are significant differences in microstructural morphologies including bee-like structure, topographic profile, 3D image, and roughness for three asphalts in this study. There are three different phases in microstructure of asphalt binder. The oil source and chemical composition of asphalt, especially asphaltenes content have a great influence on the microstructure.

Agglomeration and leaching behaviors of copper oxides with different chemical binders

The chemical binder is one of the critical factors affecting ore agglomeration behavior and leaching efficiency.In this study,we in-vestigated the effect of the type of binder and mass fraction of the H_(2)SO_(4)solution used on the curing,soaking,and leaching behavior of ag-glomerations.The results revealed that Portland cement(3CaO·SiO_(2),2CaO·SiO_(2),and 3CaO·Al_(2)O_(3))was the optimal binder for obtaining a well-shaped,stable agglomeration structure.A higher extraction rate was achieved when using Portland cement than that obtained using sodi-um silicate,gypsum,or acid-proof cement.An excessive geometric mean size is not conducive to obtaining well-shaped agglomerations and desirable porosity.Using computed tomography(CT)and MATLAB,the porosity of two-dimensional CT images in sample concentrations L1-L3 was observed to increase at least 4.5vol%after acid leaching.Ore agglomerations began to be heavily destroyed and even to disinteg-rate when the sulfuric acid solution concentration was higher than 30 g/L,which was caused by the excessive accumulation of reaction products and residuals.

Tungsten carbide coatings with different binders prepared by low power plasma spray system

Thermal spraying of cermet coatings is widely used for protection of machining parts against wear and corrosion. These coatings consist of WC particles in metal binders such as Co, Cr and Ni. Three kinds of WC powders with different metal binders (Co, NiCr and CoCr) were sprayed by low power plasma spray system on Al-Si-Cu alloy substrate. Fundamental aspects of sprayed cermet coatings, including (i) the effects of binder type on the coating structure, (ii) the hardness and (iii) the microstructure, were investigated. All cermet coatings have the same phase structure such as WC and W2 C. However, the intensities of these phases are different in each coating, mainly due to the difference in solidification rate in each case. Moreover, the hardness measurements are found to be different in each coating. The results show that, binder type has a significant effect on the physical and mechanical properties of the sprayed coatings.