The influence of cathodic pulse parameters was evaluated on plasma electrolytic oxidation(PEO)coatings grown on 7075 aluminum alloy in a silicate-based electrolyte containing potassium titanyl oxalate(PTO)using pulsed...The influence of cathodic pulse parameters was evaluated on plasma electrolytic oxidation(PEO)coatings grown on 7075 aluminum alloy in a silicate-based electrolyte containing potassium titanyl oxalate(PTO)using pulsed bipolar waveforms with various cathodic duty cycles and cathodic current densities.The coatings were characterized by SEM,EDS,and XRD.EIS was applied to investigate the electrochemical properties.It was observed that the increase of cathodic duty cycle and cathodic current density from 20%and 6 A/dm^(2) to 40%and 12 A/dm^(2) enhances the growth rate of the inner layer from 0.22 to 0.75μm/min.Adding PTO into the bath showed a fortifying effect on influence of the cathodic pulse and the mentioned change of cathodic pulse parameters,resulting in an increase of the inner layer growth rate from 0.25 to 1.10μm/min.Based on EDS analysis,Si and Ti were incorporated dominantly in the upper parts of the coatings.XRD technique merely detectedγ-Al_(2)O_(3),and there were no detectable peaks related to Ti and Si compounds.However,the EIS results confirmed that the incorporation of Ti^(4+)into alumina changed the electronic properties of the coating.The coatings obtained from the bath containing PTO using the bipolar waveforms with a cathodic duty cycle of 40%and current density values higher than 6 A/dm^(2) showed highly appropriate electrochemical behavior during 240 d of immersion due to an efficient repairing mechanism.Regarding the effects of studied parameters on the coating properties,the roles of cathodic pulse parameters and PTO in the PEO process were highlighted.展开更多
Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub&...Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> was determined by nano-particle size analyzer, and the effects of nano-α-Al<sub>2</sub>O<sub>3</sub> content, ethanol-aqueous solution ratio and KH560 dosage on the dispersion and particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> were investigated. The material structure before and after modification was determined by Fourier transform infrared spectroscopy (FTIR). Aqueous polyurethane resin and inorganic components are combined with modified nano-α-Al<sub>2</sub>O<sub>3</sub> dispersion to form chromium-free passivation solution. The solution is coated on the galvanized sheet, the adhesion and surface hardness are tested, the bonding strength of the coating and the surface hardness of the substrate are discussed. The corrosion resistance and surface morphology of the matrix were investigated by electrochemical test, neutral salt spray test and scanning electron microscope test. The chromium-free passivation film formed after the modification of nano-α-Al<sub>2</sub>O<sub>3</sub> increases the surface hardness of galvanized sheet by about 85%. The corrosion resistance of the film is better than that of a single polyurethane film. The results show that the surface hardness and corrosion resistance of polyurethane resin composite passivation film are significantly improved by the introduction of nano-α-Al<sub>2</sub>O<sub>3</sub>.展开更多
（TiB2＋Al2O3）/NiAl composites were synthesized by self-propagation high-temperature synthesis, and their phase compositions, microstructures and evolution modes were studied. The microstructures and shapes vary with...（TiB2＋Al2O3）/NiAl composites were synthesized by self-propagation high-temperature synthesis, and their phase compositions, microstructures and evolution modes were studied. The microstructures and shapes vary with the TiB2＋Al2O3 content in the NiAl matrix. TiB2 particles take a great variety of elementary shapes such as white bars, plates, herringbones, regular cubes and cuboids. These results outline a strategy of self-assembly processes in real time to build diversified microstructures. Some TiB2 grains in sizes of 2-5μm are embeded in Al2O3 clusters, while a small number of TiB2 particles disperse in the NiAl matrix. It is believed that the higher the TiB2＋Al2O3 content is, the more the regular shapes and homogeneous distributions of TiB2 and Al2O3 will be present in the NiAl matrix.展开更多
NiAl/Al2O3 composite were synthesized by thermite reaction of nickel oxide and aluminum powder mixtures.The phase,the microstructure of the composite,as well as the thermite reaction mechanism,were investigated by X-r...NiAl/Al2O3 composite were synthesized by thermite reaction of nickel oxide and aluminum powder mixtures.The phase,the microstructure of the composite,as well as the thermite reaction mechanism,were investigated by X-ray diffractomety（XRD0,scanning electron microscopy（SEM） combined with differential scanning calorimetry（DSC）.The experimental results show that the thermite reaction leads to the interpenetrating network structure of NiAl/Al2O3 at 1223K for 60min and the chemical reaction apparent activation energy is Eap=166.960±13.496kJ·mol^-1 in the NiO/Al system.展开更多
Dense and submicron-grained NiAl-Al2O3 composite was fabricated by pulse current auxiliary sintering（PCAS）.Its microstructure was analyzed by XRD,SEM and TEM,and its mechanical behavior was evaluated through compres...Dense and submicron-grained NiAl-Al2O3 composite was fabricated by pulse current auxiliary sintering（PCAS）.Its microstructure was analyzed by XRD,SEM and TEM,and its mechanical behavior was evaluated through compression test and fracture toughness test.The average grain sizes of NiAl and Al2O3 are about 200 nm and 100 nm respectively.The Al2O3 particles dispersed in NiAl matrix,forming intergranular structure and intragranular structure.During sintering,Al2O3 particles were remarkably spherized due to the unique sintering mechanism of PCAS,which is beneficial to the improvement of toughness.The NiAl-Al2O3 composite exhibits high compressive yield strength,whether at room temperature or elevated temperature.Its room-temperature（23 ℃） and elevated-temperature（1 200 ℃） compressive yield strength are up to 2 050 MPa and 140 MPa,respectively.Meanwhile,its fracture toughness is significantly enhanced,which is up to 8.2 MPa？m1/2.It is suggested that the main strengthening-toughening mechanisms are grain refinement strengthening and Al2O3 dispersion strengthening.The fracture of larger NiAl grain is the transgranular cleavage and this is induced by crack tip deflection and grain boundary weakening which are caused by intergranular and intragranular Al2O3 particles,respectively.展开更多
文摘The influence of cathodic pulse parameters was evaluated on plasma electrolytic oxidation(PEO)coatings grown on 7075 aluminum alloy in a silicate-based electrolyte containing potassium titanyl oxalate(PTO)using pulsed bipolar waveforms with various cathodic duty cycles and cathodic current densities.The coatings were characterized by SEM,EDS,and XRD.EIS was applied to investigate the electrochemical properties.It was observed that the increase of cathodic duty cycle and cathodic current density from 20%and 6 A/dm^(2) to 40%and 12 A/dm^(2) enhances the growth rate of the inner layer from 0.22 to 0.75μm/min.Adding PTO into the bath showed a fortifying effect on influence of the cathodic pulse and the mentioned change of cathodic pulse parameters,resulting in an increase of the inner layer growth rate from 0.25 to 1.10μm/min.Based on EDS analysis,Si and Ti were incorporated dominantly in the upper parts of the coatings.XRD technique merely detectedγ-Al_(2)O_(3),and there were no detectable peaks related to Ti and Si compounds.However,the EIS results confirmed that the incorporation of Ti^(4+)into alumina changed the electronic properties of the coating.The coatings obtained from the bath containing PTO using the bipolar waveforms with a cathodic duty cycle of 40%and current density values higher than 6 A/dm^(2) showed highly appropriate electrochemical behavior during 240 d of immersion due to an efficient repairing mechanism.Regarding the effects of studied parameters on the coating properties,the roles of cathodic pulse parameters and PTO in the PEO process were highlighted.
文摘Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> was determined by nano-particle size analyzer, and the effects of nano-α-Al<sub>2</sub>O<sub>3</sub> content, ethanol-aqueous solution ratio and KH560 dosage on the dispersion and particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> were investigated. The material structure before and after modification was determined by Fourier transform infrared spectroscopy (FTIR). Aqueous polyurethane resin and inorganic components are combined with modified nano-α-Al<sub>2</sub>O<sub>3</sub> dispersion to form chromium-free passivation solution. The solution is coated on the galvanized sheet, the adhesion and surface hardness are tested, the bonding strength of the coating and the surface hardness of the substrate are discussed. The corrosion resistance and surface morphology of the matrix were investigated by electrochemical test, neutral salt spray test and scanning electron microscope test. The chromium-free passivation film formed after the modification of nano-α-Al<sub>2</sub>O<sub>3</sub> increases the surface hardness of galvanized sheet by about 85%. The corrosion resistance of the film is better than that of a single polyurethane film. The results show that the surface hardness and corrosion resistance of polyurethane resin composite passivation film are significantly improved by the introduction of nano-α-Al<sub>2</sub>O<sub>3</sub>.
基金Project(51272141)supported by the National Natural Science Foundation of ChinaProject(ts20110828)supported by the Taishan Scholars Project of Shandong Province,ChinaProject(2015AA034404)supported by the Ministry of Science and Technology of China
文摘（TiB2＋Al2O3）/NiAl composites were synthesized by self-propagation high-temperature synthesis, and their phase compositions, microstructures and evolution modes were studied. The microstructures and shapes vary with the TiB2＋Al2O3 content in the NiAl matrix. TiB2 particles take a great variety of elementary shapes such as white bars, plates, herringbones, regular cubes and cuboids. These results outline a strategy of self-assembly processes in real time to build diversified microstructures. Some TiB2 grains in sizes of 2-5μm are embeded in Al2O3 clusters, while a small number of TiB2 particles disperse in the NiAl matrix. It is believed that the higher the TiB2＋Al2O3 content is, the more the regular shapes and homogeneous distributions of TiB2 and Al2O3 will be present in the NiAl matrix.
文摘NiAl/Al2O3 composite were synthesized by thermite reaction of nickel oxide and aluminum powder mixtures.The phase,the microstructure of the composite,as well as the thermite reaction mechanism,were investigated by X-ray diffractomety（XRD0,scanning electron microscopy（SEM） combined with differential scanning calorimetry（DSC）.The experimental results show that the thermite reaction leads to the interpenetrating network structure of NiAl/Al2O3 at 1223K for 60min and the chemical reaction apparent activation energy is Eap=166.960±13.496kJ·mol^-1 in the NiO/Al system.
文摘Dense and submicron-grained NiAl-Al2O3 composite was fabricated by pulse current auxiliary sintering（PCAS）.Its microstructure was analyzed by XRD,SEM and TEM,and its mechanical behavior was evaluated through compression test and fracture toughness test.The average grain sizes of NiAl and Al2O3 are about 200 nm and 100 nm respectively.The Al2O3 particles dispersed in NiAl matrix,forming intergranular structure and intragranular structure.During sintering,Al2O3 particles were remarkably spherized due to the unique sintering mechanism of PCAS,which is beneficial to the improvement of toughness.The NiAl-Al2O3 composite exhibits high compressive yield strength,whether at room temperature or elevated temperature.Its room-temperature（23 ℃） and elevated-temperature（1 200 ℃） compressive yield strength are up to 2 050 MPa and 140 MPa,respectively.Meanwhile,its fracture toughness is significantly enhanced,which is up to 8.2 MPa？m1/2.It is suggested that the main strengthening-toughening mechanisms are grain refinement strengthening and Al2O3 dispersion strengthening.The fracture of larger NiAl grain is the transgranular cleavage and this is induced by crack tip deflection and grain boundary weakening which are caused by intergranular and intragranular Al2O3 particles,respectively.
