The influence of strain rate and temperature on the tensile behavior of as-cast and HIPed NiAI-9Mo eutectic alloy was investigated in the temperature range of 700-950℃ and over a strain rate range from 2.08×10-4...The influence of strain rate and temperature on the tensile behavior of as-cast and HIPed NiAI-9Mo eutectic alloy was investigated in the temperature range of 700-950℃ and over a strain rate range from 2.08×10-4 s-1 to 2.08×10-2 s-1. The results indicate that HIP process causes an enhancement in ductility and a decrease in ultimate tensile strength (UTS), yield strength (YS), average strain hardening rate as well as a drop in brittle to ductile transition temperature(BDTT) under the same condition. It is noticed that the BDTT of as-cast NiAI-9Mo is more dependent on strain rate than that of HIPed one. The brittle to ductile transition process of the alloy is related to a sharp drop in strain hardening rate. Regardless of strain rate, the fracture morphology changes from cleavage in NiAl phase and debonding along NiAI/Mo interface below the BDTT to microvoid coalescence above BDTT. The apparent activation energy of the BDT of HIPed and as-cast material are calculated to be 327 and 263 kJ/mol, respectively, suggesting that the mechanism is associated with lattice diffusion in NiAl phase.展开更多
基金Project (51074128) supported by the National Natural Science Foundation of ChinaProject (2007ZF53067) supported by the Aeronautical Science Foundation of China+1 种基金Project (2010JM6002) supported by the Natural Science Foundation of Shaanxi Province of ChinaProjec t(2012NCL004) supported by the Innovation Foundation of Inner Mongolia University of Science and Technology
基金The authors gratefully acknowledge the National Natural Science Foundation of China for its financial support under the contract No.59895152.
文摘The influence of strain rate and temperature on the tensile behavior of as-cast and HIPed NiAI-9Mo eutectic alloy was investigated in the temperature range of 700-950℃ and over a strain rate range from 2.08×10-4 s-1 to 2.08×10-2 s-1. The results indicate that HIP process causes an enhancement in ductility and a decrease in ultimate tensile strength (UTS), yield strength (YS), average strain hardening rate as well as a drop in brittle to ductile transition temperature(BDTT) under the same condition. It is noticed that the BDTT of as-cast NiAI-9Mo is more dependent on strain rate than that of HIPed one. The brittle to ductile transition process of the alloy is related to a sharp drop in strain hardening rate. Regardless of strain rate, the fracture morphology changes from cleavage in NiAl phase and debonding along NiAI/Mo interface below the BDTT to microvoid coalescence above BDTT. The apparent activation energy of the BDT of HIPed and as-cast material are calculated to be 327 and 263 kJ/mol, respectively, suggesting that the mechanism is associated with lattice diffusion in NiAl phase.
