甘油是生物质精炼的主要副产物(约占10%),年过剩量与低利用率导致其市场价格(0.24-0.6 US kg^(-1))较低.甘油是具有三个活性羟基的多元醇,被认为是生产高价值产品的理想原料.甲酸作为甘油转化最重要的产品之一,广泛应用于农药、皮革、...甘油是生物质精炼的主要副产物(约占10%),年过剩量与低利用率导致其市场价格(0.24-0.6 US kg^(-1))较低.甘油是具有三个活性羟基的多元醇,被认为是生产高价值产品的理想原料.甲酸作为甘油转化最重要的产品之一,广泛应用于农药、皮革、染料和医药行业,将甘油电氧化(EGOR)为甲酸(FA)不仅能有效避免资源过剩造成浪费,而且能满足未来对甲酸燃料电池的需求.然而甘油电催化氧化途径较为复杂,涉及反应中间产物的脱氢、吸附/解吸和C-C键裂解.本文将密度泛函理论(DFT)与实验相结合,研究了在精细构建的NiCo_(2)O_(4)纳米片上通过EGOR生产FA的反应机制.DFT计算结果表明,活性羟基(OH^(*))物种可以改变EGOR生产FA过程的决速步骤(RDS),通过调节吸附中间体的吸附能可获得理想的FA产率.其中,高度羟基化的NiCo_(2)O_(4)纳米片(311)-OH^(*)晶面上具有最低的吉布斯自由能,能显著提升反应过程动力学.在理论分析的基础上,通过简易的电沉积方法精准制备了超薄NiCo_(2)O_(4)纳米片(~1.7 nm),并采用X射线吸收精细结构谱和高分辨透射电镜对催化剂进行了结构分析.结果表明,NiCo_(2)O_(4)纳米片中四面体(A_(Td))和八面体(B_(Oh))配位具有内角共享的A_(Td)-O-B_(Oh)和边共享的B_(Oh)-O-B_(Oh)构型,金属间的协同作用有效改善了材料的电子效应,有利于提供更多的吸附位点并促进EGOR过程中的电荷转移.NiCo_(2)O_(4)纳米片在EGOR中的电荷转移电阻仅为0.94Ω,电化学活性表面积高达10.25 cm^(2).相比较电催化析氧反应,NiCo_(2)O_(4)纳米片表现出了较好的EGOR性能,在10 mA cm^(-2)的电流密度下阳极功耗降低了320 mV,在100 mA cm^(-2)的电流密度时的阳极电势仅为1.46 VRHE.此外,在120 h的稳定性测试中,甘油的转化率和FA的选择性可分别保持在89%和70%.多电位步骤实验、原位电化学阻抗谱和电子顺磁共振谱结果表明,NiCo_(2)O_(4)纳米片上原位产生的OH^(*)物种是EGOR过程中的直接活性中心,有利于将RDS从甘油酸脱氢裂解转化为甘油醛的脱氢步骤,并进一步促进C-C键的裂解.进一步结合理论预测,证实了OH^(*)物种是EGOR过程中的直接活性中心.综上,采用绿色高效的电催化手段促进甘油生产高附加值化学品是生物质链升级的重要举措,有效避免了传统的高温高压,以水为介质,原位利用OH^(*).本文为新型催化剂的未来设计和理解生物质基原料电氧化升级反应机制提供了新思路.展开更多
Spinel oxide(NiCo_(2)O_(4))has demonstrated great potential to replace noble metal catalysts for the oxidation reaction of air pollutants.To further boost the oxidation ability of such catalysts,in this study,a facile...Spinel oxide(NiCo_(2)O_(4))has demonstrated great potential to replace noble metal catalysts for the oxidation reaction of air pollutants.To further boost the oxidation ability of such catalysts,in this study,a facile surface-engineering strategy wherein NiCo_(2)O_(4) was treated with different alkali solvents was developed.The obtained catalyst(NiCo_(2)O_(4)-OH)showed a higher surface alkalinity and more surface defects compared to the pristine spinel oxide,including enhanced structural distortion as well as promoted oxygen vacancies.The propane oxidation ability of NiCo_(2)O_(4)-OH was greatly enhanced,with a propane conversion rate that was approximately 6.4 times higher than that of pristine NiCo_(2)O_(4) at a reaction temperature 193℃.This work sets a valuable paradigm for the surface modulation of spinel oxide via alkali treatment to ensure a high-performance oxidation catalyst.展开更多
SiC-MgAl_(2)O_(4) composites with SiAlON polytypoids(12H and 21R)as the bonding phases were prepared using SiC fine powder,MgAl_(2)O_(4)fine powder and Al powder as raw materials.The effects of the firing temperature ...SiC-MgAl_(2)O_(4) composites with SiAlON polytypoids(12H and 21R)as the bonding phases were prepared using SiC fine powder,MgAl_(2)O_(4)fine powder and Al powder as raw materials.The effects of the firing temperature and the mass ratio of SiC to MgAl_(2)O_(4) on the formation of SiAlON polytypoids as well as on the properties of samples were studied.The formation mechanism of SiAlON polytypoids was discussed.The results show that firing at 1650℃in the nitrogen atmosphere,SiC-MgAl_(2)O_(4) composites with SiAlON polytypoids can be obtained.With the gradual increase of the mass ratio of SiC to MgAl_(2)O_(4) in the raw materials,12H forms first,and then coexists with 21H,finally,all 12H converts into 21R in samples.Both phases are plate crystals with flat and smooth edges.Compared with 21R,12H is conducive to improving the density and the cold mechanical properties of materials.After firing at 1650℃in the nitrogen atmosphere,with the mass ratio of SiC to MgAl_(2)O_(4) of 6:4,the sample has the cold modulus of rupture of 27 MPa,showing the optimal performance.展开更多
Supercapacitors known as typical electrochemical capacitors have been considered as one of the most promising candidates of energy storage systems owing to their advantages such as high-power density,long life span an...Supercapacitors known as typical electrochemical capacitors have been considered as one of the most promising candidates of energy storage systems owing to their advantages such as high-power density,long life span and lower production cost.The electrode materials play a crucial role on properties of supercapacitors.Hence,many researches have been focused on the development of novel electrode materials for high-performance supercapacitors.NiCo_2O_4as supercapacitor electrode material has drawn more and more attentions in recent years due to its outstanding advantages,such as high theoretical capacity,low cost,natural abundance and easy of synthesis.However,the NiCo_2O_4always suffer from severe capacity deterioration because of the low electrical conductivity and small surface area.Hence,it is necessary to systematically and comprehensively summarize the progress in understanding and modifying NiCo_2O_4-based materials from various aspects.In this review,the structure and synthesis method of NiCo_2O_4-based materials are discussed in detail.And then,the major goal of this review is to highlight new progress in using proposed strategies to improve the cycling stability and rate capacity of NiCo_2O_4-based materials,including synthesis,control of special morphologies and design of composite materials.Finally,an insight into the future research and development of Ni Co_2O_4-based materials for supercapacitors is prospected.展开更多
The development of 3D structural composites with electromagnetic(EM)wave absorption could attenuate EM waves.Herein,magnetized flower-like Cu_(9)S_(5)/ZnFe_(2)O_(4)composites were fabricated through a multistep hydrot...The development of 3D structural composites with electromagnetic(EM)wave absorption could attenuate EM waves.Herein,magnetized flower-like Cu_(9)S_(5)/ZnFe_(2)O_(4)composites were fabricated through a multistep hydrothermal method.The crystallographic and surface phase chemical information,morphological structure,and magnetic and EM parameters of the composites were analyzed.The prepared Cu_(9)S_(5)/ZnFe_(2)O_(4)composites have multiple loss paths for EM waves and present an overall 3D flower-like structure.The Cu_(9)S_(5)/ZnFe_(2)O_(4)composites exhibit a minimum reflection loss of-54.38 dB and a broad effective absorption bandwidth of 5.92 GHz.Through magnetization,ZnFe_(2)O_(4)particles are self-assembled and grown on the surfaces of Cu_(9)S_(5).Such a modification is conducive to the generation of additional cross-linking contact sites and the effective introduction of a large number of phase interfaces,crystalline defects,special three-dimensional flower-like structures,and magneto-electrical coupling loss effects.Moreover,the synergistic effect of multiple loss strategies effectively improves EM wave absorption by the material.This work can provide a strategy for the use of magnetizationmodified sulfide composite functional materials in EM wave absorption.展开更多
文摘甘油是生物质精炼的主要副产物(约占10%),年过剩量与低利用率导致其市场价格(0.24-0.6 US kg^(-1))较低.甘油是具有三个活性羟基的多元醇,被认为是生产高价值产品的理想原料.甲酸作为甘油转化最重要的产品之一,广泛应用于农药、皮革、染料和医药行业,将甘油电氧化(EGOR)为甲酸(FA)不仅能有效避免资源过剩造成浪费,而且能满足未来对甲酸燃料电池的需求.然而甘油电催化氧化途径较为复杂,涉及反应中间产物的脱氢、吸附/解吸和C-C键裂解.本文将密度泛函理论(DFT)与实验相结合,研究了在精细构建的NiCo_(2)O_(4)纳米片上通过EGOR生产FA的反应机制.DFT计算结果表明,活性羟基(OH^(*))物种可以改变EGOR生产FA过程的决速步骤(RDS),通过调节吸附中间体的吸附能可获得理想的FA产率.其中,高度羟基化的NiCo_(2)O_(4)纳米片(311)-OH^(*)晶面上具有最低的吉布斯自由能,能显著提升反应过程动力学.在理论分析的基础上,通过简易的电沉积方法精准制备了超薄NiCo_(2)O_(4)纳米片(~1.7 nm),并采用X射线吸收精细结构谱和高分辨透射电镜对催化剂进行了结构分析.结果表明,NiCo_(2)O_(4)纳米片中四面体(A_(Td))和八面体(B_(Oh))配位具有内角共享的A_(Td)-O-B_(Oh)和边共享的B_(Oh)-O-B_(Oh)构型,金属间的协同作用有效改善了材料的电子效应,有利于提供更多的吸附位点并促进EGOR过程中的电荷转移.NiCo_(2)O_(4)纳米片在EGOR中的电荷转移电阻仅为0.94Ω,电化学活性表面积高达10.25 cm^(2).相比较电催化析氧反应,NiCo_(2)O_(4)纳米片表现出了较好的EGOR性能,在10 mA cm^(-2)的电流密度下阳极功耗降低了320 mV,在100 mA cm^(-2)的电流密度时的阳极电势仅为1.46 VRHE.此外,在120 h的稳定性测试中,甘油的转化率和FA的选择性可分别保持在89%和70%.多电位步骤实验、原位电化学阻抗谱和电子顺磁共振谱结果表明,NiCo_(2)O_(4)纳米片上原位产生的OH^(*)物种是EGOR过程中的直接活性中心,有利于将RDS从甘油酸脱氢裂解转化为甘油醛的脱氢步骤,并进一步促进C-C键的裂解.进一步结合理论预测,证实了OH^(*)物种是EGOR过程中的直接活性中心.综上,采用绿色高效的电催化手段促进甘油生产高附加值化学品是生物质链升级的重要举措,有效避免了传统的高温高压,以水为介质,原位利用OH^(*).本文为新型催化剂的未来设计和理解生物质基原料电氧化升级反应机制提供了新思路.
基金financially supported by the National Natural Science Foundation of China(No.22072069)the Key Laboratory of Hubei Province for Coal Conversion and New Carbon Materials(Wuhan University of Science and Technology No.WKDM202303).
文摘Spinel oxide(NiCo_(2)O_(4))has demonstrated great potential to replace noble metal catalysts for the oxidation reaction of air pollutants.To further boost the oxidation ability of such catalysts,in this study,a facile surface-engineering strategy wherein NiCo_(2)O_(4) was treated with different alkali solvents was developed.The obtained catalyst(NiCo_(2)O_(4)-OH)showed a higher surface alkalinity and more surface defects compared to the pristine spinel oxide,including enhanced structural distortion as well as promoted oxygen vacancies.The propane oxidation ability of NiCo_(2)O_(4)-OH was greatly enhanced,with a propane conversion rate that was approximately 6.4 times higher than that of pristine NiCo_(2)O_(4) at a reaction temperature 193℃.This work sets a valuable paradigm for the surface modulation of spinel oxide via alkali treatment to ensure a high-performance oxidation catalyst.
文摘SiC-MgAl_(2)O_(4) composites with SiAlON polytypoids(12H and 21R)as the bonding phases were prepared using SiC fine powder,MgAl_(2)O_(4)fine powder and Al powder as raw materials.The effects of the firing temperature and the mass ratio of SiC to MgAl_(2)O_(4) on the formation of SiAlON polytypoids as well as on the properties of samples were studied.The formation mechanism of SiAlON polytypoids was discussed.The results show that firing at 1650℃in the nitrogen atmosphere,SiC-MgAl_(2)O_(4) composites with SiAlON polytypoids can be obtained.With the gradual increase of the mass ratio of SiC to MgAl_(2)O_(4) in the raw materials,12H forms first,and then coexists with 21H,finally,all 12H converts into 21R in samples.Both phases are plate crystals with flat and smooth edges.Compared with 21R,12H is conducive to improving the density and the cold mechanical properties of materials.After firing at 1650℃in the nitrogen atmosphere,with the mass ratio of SiC to MgAl_(2)O_(4) of 6:4,the sample has the cold modulus of rupture of 27 MPa,showing the optimal performance.
基金financially supported by the National Natural Science Foundation of China (nos. 51774002 and 51672156)Anhui Provincial Science Fund for Excellent Young Scholars (no. gxyqZD2016066)+2 种基金the National Key Basic Research Program of China (2014CB932400)Guangdong special support program (2015TQ01N401)Shenzhen Technical Plan Project (KQJSCX20160226191136)
文摘Supercapacitors known as typical electrochemical capacitors have been considered as one of the most promising candidates of energy storage systems owing to their advantages such as high-power density,long life span and lower production cost.The electrode materials play a crucial role on properties of supercapacitors.Hence,many researches have been focused on the development of novel electrode materials for high-performance supercapacitors.NiCo_2O_4as supercapacitor electrode material has drawn more and more attentions in recent years due to its outstanding advantages,such as high theoretical capacity,low cost,natural abundance and easy of synthesis.However,the NiCo_2O_4always suffer from severe capacity deterioration because of the low electrical conductivity and small surface area.Hence,it is necessary to systematically and comprehensively summarize the progress in understanding and modifying NiCo_2O_4-based materials from various aspects.In this review,the structure and synthesis method of NiCo_2O_4-based materials are discussed in detail.And then,the major goal of this review is to highlight new progress in using proposed strategies to improve the cycling stability and rate capacity of NiCo_2O_4-based materials,including synthesis,control of special morphologies and design of composite materials.Finally,an insight into the future research and development of Ni Co_2O_4-based materials for supercapacitors is prospected.
基金This work was supported by the National Natural Science Foundation of China(No.51477002)the University Synergy Innovation Program of Anhui Province,China(No.GXXT-2019-028).
文摘The development of 3D structural composites with electromagnetic(EM)wave absorption could attenuate EM waves.Herein,magnetized flower-like Cu_(9)S_(5)/ZnFe_(2)O_(4)composites were fabricated through a multistep hydrothermal method.The crystallographic and surface phase chemical information,morphological structure,and magnetic and EM parameters of the composites were analyzed.The prepared Cu_(9)S_(5)/ZnFe_(2)O_(4)composites have multiple loss paths for EM waves and present an overall 3D flower-like structure.The Cu_(9)S_(5)/ZnFe_(2)O_(4)composites exhibit a minimum reflection loss of-54.38 dB and a broad effective absorption bandwidth of 5.92 GHz.Through magnetization,ZnFe_(2)O_(4)particles are self-assembled and grown on the surfaces of Cu_(9)S_(5).Such a modification is conducive to the generation of additional cross-linking contact sites and the effective introduction of a large number of phase interfaces,crystalline defects,special three-dimensional flower-like structures,and magneto-electrical coupling loss effects.Moreover,the synergistic effect of multiple loss strategies effectively improves EM wave absorption by the material.This work can provide a strategy for the use of magnetizationmodified sulfide composite functional materials in EM wave absorption.
