采用原位水热生长法在泡沫镍基底上制备了β-Ni(OH)2纳米盘并通过煅烧获得NiO,均可以直接作为工作电极。利用XRD和SEM对样品进行了表征,并进行了电化学性能测试,结果表明我们所制备的Ni(OH)2电极在2 M KOH溶液中2.5 A/g的放电电流密度下...采用原位水热生长法在泡沫镍基底上制备了β-Ni(OH)2纳米盘并通过煅烧获得NiO,均可以直接作为工作电极。利用XRD和SEM对样品进行了表征,并进行了电化学性能测试,结果表明我们所制备的Ni(OH)2电极在2 M KOH溶液中2.5 A/g的放电电流密度下,比容量达1495 F/g,通过煅烧得到的NiO,同样可以作为电极材料。展开更多
以石墨烯、Ni SO4、K2S2O8(饱和)、氨水、蒸馏水为反应物,经过常温回流制备得到Ni OOH/Ni(OH)2含量不同的石墨烯/Ni OOH/Ni(OH)2复合材料。扫描电子显微镜法(SEM)表征显示,Ni(OH)2/Ni OOH在石墨烯表面上形成多孔结构,负载了多孔Ni OOH/N...以石墨烯、Ni SO4、K2S2O8(饱和)、氨水、蒸馏水为反应物,经过常温回流制备得到Ni OOH/Ni(OH)2含量不同的石墨烯/Ni OOH/Ni(OH)2复合材料。扫描电子显微镜法(SEM)表征显示,Ni(OH)2/Ni OOH在石墨烯表面上形成多孔结构,负载了多孔Ni OOH/Ni(OH)2的石墨烯又进行了层层堆积。电化学性能测试显示,电极材料GP/Ni-5性能最佳,其在电流密度为100 m A/g时,首次可逆比容量为1 287.4 m Ah/g,80次循环后比容量保持在830 m Ah/g,而纯Ni OOH/Ni(OH)2首次可逆比容量为2 400.6 m Ah/g,80次循环后比容量已降至405.9 m Ah/g,表明石墨烯的加入大大提高了材料的稳定性。展开更多
Spherical Ni(OH)2 powder coated with Co(OH)2 as raw material was mixed with LiOH to synthesize cathode material for lithium ion battery by using solid-state reaction. After sintered at temperature above 600 ℃, a soli...Spherical Ni(OH)2 powder coated with Co(OH)2 as raw material was mixed with LiOH to synthesize cathode material for lithium ion battery by using solid-state reaction. After sintered at temperature above 600 ℃, a solid solution with layer structure was formed. The result of XPS shows that it is a concentration gradient material with higher cobalt content at the surface, and the gradient decreases with increasing sintering temperature from 650 to 750 ℃. This new gradient material, called as Co-coated LiNiO2, exhibits excellent electrochemical performances for the cathode of Li-ion batteries in comparison with LiNiO2 and Co-doping LiNiO2. The discharge capacity of Co-coated LiNiO2 is over 180 mA·h/g and capacity decay per cycle is less than 0.07% when Co-coated LiNiO2 consisting of 92% nickel and 8% cobalt was sintered at the temperatures between 650-670 ℃. Though initial discharge capacity could be increased with higher sintering temperature, the cycle life would be reduced.展开更多
文摘采用原位水热生长法在泡沫镍基底上制备了β-Ni(OH)2纳米盘并通过煅烧获得NiO,均可以直接作为工作电极。利用XRD和SEM对样品进行了表征,并进行了电化学性能测试,结果表明我们所制备的Ni(OH)2电极在2 M KOH溶液中2.5 A/g的放电电流密度下,比容量达1495 F/g,通过煅烧得到的NiO,同样可以作为电极材料。
文摘以石墨烯、Ni SO4、K2S2O8(饱和)、氨水、蒸馏水为反应物,经过常温回流制备得到Ni OOH/Ni(OH)2含量不同的石墨烯/Ni OOH/Ni(OH)2复合材料。扫描电子显微镜法(SEM)表征显示,Ni(OH)2/Ni OOH在石墨烯表面上形成多孔结构,负载了多孔Ni OOH/Ni(OH)2的石墨烯又进行了层层堆积。电化学性能测试显示,电极材料GP/Ni-5性能最佳,其在电流密度为100 m A/g时,首次可逆比容量为1 287.4 m Ah/g,80次循环后比容量保持在830 m Ah/g,而纯Ni OOH/Ni(OH)2首次可逆比容量为2 400.6 m Ah/g,80次循环后比容量已降至405.9 m Ah/g,表明石墨烯的加入大大提高了材料的稳定性。
文摘Spherical Ni(OH)2 powder coated with Co(OH)2 as raw material was mixed with LiOH to synthesize cathode material for lithium ion battery by using solid-state reaction. After sintered at temperature above 600 ℃, a solid solution with layer structure was formed. The result of XPS shows that it is a concentration gradient material with higher cobalt content at the surface, and the gradient decreases with increasing sintering temperature from 650 to 750 ℃. This new gradient material, called as Co-coated LiNiO2, exhibits excellent electrochemical performances for the cathode of Li-ion batteries in comparison with LiNiO2 and Co-doping LiNiO2. The discharge capacity of Co-coated LiNiO2 is over 180 mA·h/g and capacity decay per cycle is less than 0.07% when Co-coated LiNiO2 consisting of 92% nickel and 8% cobalt was sintered at the temperatures between 650-670 ℃. Though initial discharge capacity could be increased with higher sintering temperature, the cycle life would be reduced.
