Analysis of standardization development of TCM in Sichuan

Sichuan province is home to rich traditional Chinese medicine(TCM)resources.Recent years have seen unremitting efforts of TCM standardization in the province.By analyzing the measures and existing problems,this paper provides recommendations to boost TCM development through standardization.

Standardization of meibomian gland dysfunction in an Egyptian population sample using a non-contact meibography technique

AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Observational,cross-sectional,analytic study,in which 104 Egyptian volunteers were included.Both upper lids were examined,using“Sirius CSO”machine.Each eyelid was given a degree of meibomian gland loss(MGL),which was calculated by the software of the machine.RESULTS:Mean percentage MGL in right upper lid was of 30.9%±12.6%,and that of left upper lid was 32.6%±11.8%.Thirty-four volunteers(32.7%)had first-degree MGL in their right upper lid,and 67.3%had second-degree loss.One volunteer(1%)had zero-degree MGL in left upper lid,28(26.9%)had first-degree loss,and 75(72.1%)had second-degree loss.Degree of MGL in right upper eyelid was not related to age,but degree of MGL in left upper eyelid increased with age.There was statistically significant difference between both genders for degree of MGL in right eye(P=0.036)and in left eye(P=0.027).CONCLUSION:Noncontact meibography is a useful non-invasive tool for diagnosing MGL.MGL is diagnosed in 100%of apparently normal individuals;26.9%-32.7%of which have first-degree MGL,and 67.3%-72.1%have second-degree MGL.

PDE Standardization Analysis and Solution of TypicalMechanics Problems

A numerical approach is an effective means of solving boundary value problems(BVPs).This study focuses on physical problems with general partial differential equations(PDEs).It investigates the solution approach through the standard forms of the PDE module in COMSOL.Two typical mechanics problems are exemplified:The deflection of a thin plate,which can be addressed with the dedicated finite element module,and the stress of a pure bending beamthat cannot be tackled.The procedure for the two problems regarding the three standard forms required by the PDE module is detailed.The results were in good agreement with the literature,indicating that the PDE module provides a promising means to solve complex PDEs,especially for those a dedicated finite element module has yet to be developed.

Dialogue on standards:directions and difficulties of standardization discipline construction

To probe into the directions and difficulties of standardization discipline construction in China,China Standardization Press organized a pertinent dialogue on July 10.During the event,Yu Xinli,President of China Association for Standardization,was invited as the moderator.Several standardization experts including Song Mingshun,Mai Lyubo,Qiang Yi,Cao Lili,and Huang Manxue from the China Standardization Expert Committee and renowned universities and research institutes in the country were invited as guests to give their insightful views.

Analysis of standardization of community security fund management-Taking practice of community security fund management in Wuhou district of Chengdu as an example

The Chengdu community security funds refer to the special security funds for urban and rural community development and governance in Chengdu.At present,there are some problems in the use of community security funds,such as low participation of residents,and low efficiency of fund use.Taking the exploration of standardization of community security fund management in Wuhou district,Chengdu city,as an example,this paper suggests further strengthening the use and management of community security funds by means of standardization,ensuring the democratic,open,and transparent use of funds,and effectively enhancing the supporting role of community security funds in community governance.

Workshop on driving inclusiveness in standardization

With the support of the Belgian FPS Economy,SBS and CEN-CENELEC are co-organizing the workshop,under the High-Level Forum on European standardization(HLF)and its workstream on inclusiveness in national standardization,to tackle issues of access and participation in standardization at the national level and discuss and promote best practices.

Parallel session on marine standardization

The session on marine standardization was successfully held on May 22.Yu Xinli,President of China Association for Standardization(CAS),was invited to deliver a keynote speech.The highlight of her speech is presented as follows。

China and Sri Lanka sign a MoU on standardization

Witnessed by Chinese Premier Li Qiang and Sri Lanka Prime Minister Dinesh Gunawardena,Luo Wen,Minister of SAMR,and Anura Dissanayake,Secretary to the Prime Minster of Sri Lanka,signed a MoU on the standardization area on March 26.

Comparative analysis of CPUE standardization of Chinese Pacific saury(Cololabis saira) fishery based on GLM and GAM

Pacific saury is an important high-seas fishery resource in the Northwest Pacific Ocean for the Chinese Mainland.Reliable and accurate catch per unit effort(CPUE)plays a significant rule in Pacific saury stock assessment.Many statistical models have been used in the previous CPUE standardization research.Here,we compare the performance of Generalized Linear Models(GLMs)and Generalized Additive Models(GAMs)using CPUE data collected from Chinese saury fishery in the Northwest Pacific Ocean from 2003 to 2017(excluding data from Chinese Taipei),and evaluate the influence of spatial,temporal,environmental variables and vessel length on CPUE.Optimal GLM/GAM models were selected using the Bayesian information criterion(BIC).Explained deviance and 5-fold bootstrap cross-validation results were used to compare the performance of the two model types.Fitted GLMs accounted for 21.57%of the total model-explained deviance,while GAMs accounted for 38.95%.Predictive performance metrics and 5-fold cross-validation results showed that the best GAM performed better than the best GLM.Therefore,we recommend GAM as the preferred model for standardizing CPUE of Pacific saury in the Northwest Pacific Ocean.

Multi-mode process monitoring based on a novel weighted local standardization strategy and support vector data description

There are multiple operating modes in the real industrial process, and the collected data follow the complex multimodal distribution, so most traditional process monitoring methods are no longer applicable because their presumptions are that sampled-data should obey the single Gaussian distribution or non-Gaussian distribution. In order to solve these problems, a novel weighted local standardization(WLS) strategy is proposed to standardize the multimodal data, which can eliminate the multi-mode characteristics of the collected data, and normalize them into unimodal data distribution. After detailed analysis of the raised data preprocessing strategy, a new algorithm using WLS strategy with support vector data description(SVDD) is put forward to apply for multi-mode monitoring process. Unlike the strategy of building multiple local models, the developed method only contains a model without the prior knowledge of multi-mode process. To demonstrate the proposed method's validity, it is applied to a numerical example and a Tennessee Eastman(TE) process. Finally, the simulation results show that the WLS strategy is very effective to standardize multimodal data, and the WLS-SVDD monitoring method has great advantages over the traditional SVDD and PCA combined with a local standardization strategy(LNS-PCA) in multi-mode process monitoring.

Standardization of CPUE for Chilean Jack Mackerel (Trachurus murphyi) from Chinese Trawl Fleets in the High Seas of the Southeast Pacific Ocean

The generalized linear model （GLM） and generalized additive model （GAM） were applied to the standardization of catch per unit effort （CPUE） for Chilean jack mackerel from Chinese factory trawl fishing fleets in the Southeast Pacific Ocean from 2001 to 2010 by removing the operational, environmental, spatial and temporal impacts. A total of 9 factors were selected to build the GLM and GAM, i.e., Year, Month, Vessel, La Nifia and E1 Nifio events （ELE）, Latitude, Longitude, Sea surface temperature （SST）, SST anomaly （SSTA）, Nino3.4 index and an interaction term between Longitude and Latitude. The first 5 factors were significant components in the GLM, which in combination explained 27.34% of the total variance in nominal CPUE. In the stepwise GAM, all factors explained 30.78% of the total variance, with Month, Year and Vessel as the main factors influencing CPUE. The higher CPUE occurred during the period April to July at a SST range of 12-15℃ and a SSTA range of 0.2-1.0℃. The CPUE was significantly higher in normal years compared with that in La Nifia and E1 Nifio years. The abundance of Chilean jack mackerel declined during 2001 and 2010, with an increase in 2007. This work provided the relative abundance index of Chilean jack mackerel for stock as- sessment by standardizing catch and effort data of Chinese trawl fisheries and examined the influence of temporal, spatial, environ- mental and fisheries operational factors on Chilean jack mackerel CPUE.

Improved Measurement Performance of Inorganic Elements in Coal by Laser-Induced Breakdown Spectroscopy Coupled with Internal Standardization

Laser-induced breakdown spectroscopy was employed to determine the inorganic elements in coal. To improve the measurement＇s accuracy and precision, a new internal standardization scheme, which we named changed internal standardization, was compared with the traditional internal standardization and no internal standardization for the analysis of inorganic elements. The new internal standardization scheme used the atomic line of carbon at 247.86 nm and the molecular band of CN at 388.34 nm and C2 at 516.32 nm to normalize the lines of inorganic elements that were distributed in the same spectral channel. The performance of the utilization of the new internal standardization scheme was evaluated using a set of coal samples, including twenty calibration samples and five validation samples. The results show that the coefficients of determination R2 and the slope of calibration models coupled with changed internal standard- ization are better than that of the calibration models coupled with fixed internal standardization and no internal standardization. Moreover, the measurement accuracy and reproducibility of changed internal standardization for the analysis of five validation samples also yielded further improvement. The results that we obtained suggest that changed internal standardization could compensate for the matrix effects, as well as the influence of the difference in the spectral response of the light collection system.

Improved EEMD-based standardization method for developing long tree-ring chronologies

Long tree-ring chronologies can be developed by overlapping data from living trees with data from fossil trees through cross-dating.However,low-frequency climate signals are lost when standardizing tree-ring series due to the"segment length curse".To alleviate the segment length curse and thus improve the standardization method for developing long tree-ring chronologies,here we first calculated a mean value for all the tree ring series by overlapping all of the tree ring series.The growth trend of the mean tree ring width(i.e.,cumulated average growth trend of all the series)was determined using ensemble empirical mode decomposition.Then the chronology was developed by dividing the mean value by the growth trend of the mean value.Our improved method alleviated the problem of trend distortion.Long-term signals were better preserved using the improved method than in previous detrending methods.The chronologies developed using the improved method were better correlated with climate than those developed using conservative methods.The improved standardization method alleviates trend distortion and retains more of the low-frequency climate signals.

Balancing the customization and standardization:exploration and layout surrounding the regulation of the growing field of 3D-printed medical devices in China

Medical devices are instruments and other tools that act on the human body to aid clinical diagnosis and disease treatment,playing an indispensable role in modern medicine.Nowadays,the increasing demand for personalized medical devices poses a significant challenge to traditional manufacturing methods.The emerging manufacturing technology of three-dimensional(3D)printing as an alternative has shown exciting applications in the medical field and is an ideal method for manufacturing such personalized medical devices with complex structures.However,the application of this new technology has also brought new risks to medical devices,making 3D-printed devices face severe challenges due to insufficient regulation and the lack of standards to provide guidance to the industry.This review aims to summarize the current regulatory landscape and existing research on the standardization of 3D-printed medical devices in China,and provide ideas to address these challenges.We focus on the aspects concerned by the regulatory authorities in 3D-printed medical devices,highlighting the quality system of such devices,and discuss the guidelines that manufacturers should follow,as well as the current limitations and the feasible path of regulation and standardization work based on this perspective.The key points of the whole process quality control,performance evaluation methods and the concept of whole life cycle management of 3D-printed medical devices are emphasized.Furthermore,the significance of regulation and standardization is pointed out.Finally,aspects worthy of attention and future perspectives in this field are discussed.

Potential Impact of Mobile Phone Charger Standardization in China

The standardization of mobile phone charger is proceeding steadily in Europe. This paper makes a quantitative analysis on the potential impact of this move in China. The demands for mobile handset and phone charger in China after the introduction of standardization are predicted based on Bass diffusion model. The results indicate that the standardization would have little influence on mobile phone producers, but may charger makers face a fierce turbulence. Standardization would not only reduce the size of charger market, but also change the stable demand to a fluctuating pattern. Standardization of mobile phone charger can contribute to green economy greatly and provide the ICT industry a directive signal for green innovation in the future. Finally, suggestions for policy makers are provided based on the analysis.

Standardization of Fieldbus and Industrial Ethernet

Fieldbus and industrial Ethernet standards can guide the specification andcoordinate bus optimization. The standards are the basis for the development of field-bus and industrial Ethernet. In this paper, we review complex standard systems allover the world. We discuss 18 fieldbus standards, including the International Electro-technical Commission(IEC) 61158, the IEC 61784 standard matched with IEC 61158,the controller and device interface standard IEC 62026 for low voltage distributionand control devices, and the International Organization for Standardization(ISO)11898 and ISO 11519 standards related to the controller area network(CAN) bus. Wealso introduce the standards of China, Europe, Japan and America. This paper pro-vides a reference to develop fieldbus and industrial Ethernet products for Chinese en-terprises.

High-Dimensional Spatial Standardization Algorithm for Diffusion Tensor Image Registration

Three high dimensional spatial standardization algorithms are used for diffusion tensor image(DTI)registration,and seven kinds of methods are used to evaluate their performances.Firstly,the template used in this paper was obtained by spatial transformation of 16 subjects by means of tensor-based standardization.Then,high dimensional standardization algorithms for diffusion tensor images,including fractional anisotropy(FA)based diffeomorphic registration algorithm,FA based elastic registration algorithm and tensor-based registration algorithm,were performed.Finally,7 kinds of evaluation methods,including normalized standard deviation,dyadic coherence,diffusion cross-correlation,overlap of eigenvalue-eigenvector pairs,Euclidean distance of diffusion tensor,and Euclidean distance of the deviatoric tensor and deviatoric of tensors,were used to qualitatively compare and summarize the above standardization algorithms.Experimental results revealed that the high-dimensional tensor-based standardization algorithms perform well and can maintain the consistency of anatomical structures.

International Standardization of Blockchain and Distributed Ledger Technology:Overlaps,Gaps and Challenges

As one of the most concerned digital technologies in recent years,blockchain and distributed ledger technology are an important driving force for a new round of technological development.It is currently in the process of accelerating its evolution and maturity,and has gradually integrated with other digital technologies.It has been applied in many industries,providing decentralized solutions for various industries,realizing innovative storage models,and building a new trust system.As blockchain technology is officially incorporated into China’s new information infrastructure category,the application fields of blockchain have expanded rapidly,gradually extending from the financial field and government affairs to other fields in the real economy.At the same time,with the continuous development of the globalized economy,blockchain technology will also have a profound impact on international technological and economic development.Therefore,for the healthy and orderly development and real implementation of the blockchain industry,standardize the application of blockchain,effectively break through the cognitive and technical barriers between different countries,industries and systems on a global scale,prevent application risks,the development of the global blockchain industry needs standardization basis,which is particularly important and urgent.A sound standard system is an important key to the successful development of technology,and formulating the right standard at the right time for technology development helps ensure the ease of use and interoperability of the technology.From the perspective of international standardization,this article first introduces the general situation of ISO,ITU-T,IEEE,W3C and other international standardization organizations,and sorts out the status quo of the blockchain standardization working groups of mainstream international standardization organizations.All blockchain-related standards under development have been analyzed for the characteristics of international blockchain technology standards and industry application standards.Through data analysis,the overlaps,differences and conflicts in the field of international blockchain standard formulation are sorted out,and suggestions for blockchain standardization work in the application and development of blockchain technology standardization by international organizations and industries are put forward.The plans and layouts of future international standards are summarized to help the development of the international standardization of blockchain.

Standardization of Leaf Sampling Technique in Jackfruit Nutrient Status Diagnosis

In China, little information is known about the nutrient requirements of jackfruits and the traditional nutrient management usually depends on the experience. Therefore, in this study, an attempt was made to standardize the leaf sampling technique and the suitable range of leaf nutrient concentrations for jackfruit (Artocarpus heterophyllus Lam.) nutrient status diagnosis. The sampling result was affected by canopy height, leaf age and time of sampling. Therefore, the three factors were studied. The results illustrated that the stability in level of nutrient concentrations was in 3 - 6 month-old leaves from the central part of the canopy. The most stable period was from April to May for leaf sampling. It was recommended that the stable intracanopy and stable period of nutrient concentrations could be used as the standards of leaf sampling technique. Based on the leaf sampling technique, the standard of leaf nutrient concentrations was summarized, and could be used as the standard of nutrient suitability evaluation.

Overview of the South African mine health and safety standardization and regulation systems

Outlined the South African mine health and safety regulatory framework,in- cluding the roles of government,tripartite council,service agencies,mine enterprises, rescue stations and workers unions,analyzed the institutional structures of South African mine health and safety standardization,including the South African standard and specifi- cation systems and standard development processes,and characterized the South African mine health and safety standardization and regulation systems.Intended to provide some suggestions for the transformation and improvement of mine health and safety standardi- zation and regulation systems in China or in similar situations.