Experimental study on the effect of H2S and SO2 on high temperature corrosion of 12Cr1MoV

Aiming at the high temperature corrosion in a coal-fired boiler,the effect of H2S and SO2 on the corrosion of 12 CrlMoV under the water wall condition has been investigated by experiments.The results indicate that H2 S can promote the corrosion significantly,and the coarse porous oxide film formed cannot stop the progress of corrosion.While SO2 presents little effect on the corrosion.The main composition of the surface of 12 CrlMoV corrosion products is Fe2 O3.With H2S in the atmosphere,the corrosion gradually develops into deeper layers by forming FeS,FeO and Fe2 O3 alternately.The corrosion rate is doubled for every 50℃ inerease in temperature at 400-500℃.

Resistance index and browning mechanism of apple peel under high temperature stress

Apples are one of the most important economic crops worldwide.Because of global warming and an aggravation of environmental,abnormally high temperatures occur frequently in fruit-growing season and seriously affect normal fruit growth and reduce fruit quality and yield.We took five-year-old Ruixue’(Qinfu 1×Pink Lady;CNA20151469.1) fruits as test materials,and the ambient temperature during fruit development was monitored.The results showed that during the fruit-growing season,especially during the rapid growth stage (July to August),the maximum daily temperature exceeded 30℃ and lasted for more than 40 days.To determine the effects of high temperature stress on the apple fruit resistance,we treated expanding,veraison,and maturity-period fruits at different temperatures.It was found that the fruits of the expanding period showed strong resistance to high temperature stress,whereas during veraison and maturity,fruit resistance to high temperature stress decreased,and the fruit peel browning phenotype appeared.Meanwhile,the content of malonaldehyde (MDA),hydrogen peroxide (H_(2)O_(2)),and superoxide anion (O._(2)^(-)) in the peel gradually increased with increasing temperature.The content of total phenols,flavanol,and flavonoids in the peel decreased substantially at 45℃.Moreover,it was found that polyphenol oxidase gene (MdPPO1) was most sensitive to high temperature stress in apple.Furthermore,transient and stable MdPPO1 overexpression significantly promoted peel browning.The transgenic materials were more sensitive to high temperatures,and browning was more severe compared to non-genetically modified organism (WT).Stable MdPPO1 knockout calli obtained via clustered regularly interspersed short palindromic repeats (CRISPR/Cas9) gene knockout technology reduced the browning phenotype,and the resultant fruits were not sensitive to the effects of high temperature stress.Thus,MdPPO1 expression may be a key factor of high temperature-related changes observed in the browning phenotype that provides a scientific theoretical basis for the selection of high temperature-resistant varieties and apple cultivation and management in the future.

Highly reinforce the interface stability using 2-Phenyl-1H-imidazole-1-sulfonate electrolyte additive to enhance the high temperature performance of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/graphite batteries

This work develops 2-Phenyl-1H-imidazole-1-sulfonate(PHIS)as a multi-functional electrolyte additive for H2O/HF scavenging and film formation to improve the high temperature performance of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/graphite batteries.After 450 cycles at room temperature(25℃),the discharge capacity retentions of batteries with blank and PHIS-containing electrolyte are 56.03%and 94.92%respectively.After 230 cycles at high temperatures(45℃),their values are 75.30%and 88.38%respectively.The enhanced electrochemical performance of the batteries with PHIS-containing electrolyte is supported by the spectroscopic characterization and theoretical calculations.It is demonstrated that this PHIS electrolyte additive can facilitate the construction of the electrode interface films,remove the H2O/HF in the electrolyte,and improve the electrochemical performance of the batteries.This work not only develops a sulfonate-based electrolyte but also can stimulate new ideas of functional additives to improve the battery performance.

High-temperature oxidation behavior of heat resistant stainless steel 1.4828

The kinetic curves of the high-temperature oxidation of austenitic heat resistant stainless steel 1. 4828 at 1 050 ℃ were measured using a weighing method. It is shown that the oxidation curves at 1 050 ℃ followed the parabolic line law, and after 250 h of oxidation, the mass gain was about 80 g/m2. The surface morphology and structure of the oxide layers were studied by scanning electron microscopy and X-ray diffraction. A complicated oxide layer obtained at 1 050 ℃ was mainly composed, from inner to outer, of （FeSi） 3 04, Cr2 03, Fe2 03, and spinel oxides FeCr204 and NiMn204.

High Temperature and the Ethylene Antagonist 1-Methylcyclopropene Alter Ethylene Evolution Patterns,Antioxidant Responses,and Boll Growth in Gossypium hirsutum

The cotton (Gossypium hirsutum L.) crop experiences high temperatures during flowering and boll development, but information regarding the impact of ethylene inhibition and high temperature on early boll development is limited. The objective of this study was to determine the effects of high temperature and the anti-ethylene compound 1-methylcy-cloprone (1-MCP) on G. hirsutum boll development. Treatments consisted of temperature regime (38/20?C and 30/ 20?C), 1-MCP treatment, and days past anthesis (DPA). High temperature decreased ethylene synthesis by 61% at 2 DPA, and 1-MCP caused a 40% decrease in ethylene production at 1 DPA. Glutathione reductase activity increased under high temperature, whereas superoxide dismutase activity (SOD) and membrane peroxidation (malondialdehyde content) remained unchanged. 1-MCP treatment did not affect GR activity in developing bolls. High temperature and 1-MCP treatment increased the weight of cotton bolls collected 8 DPA with an increase of 0.7 and 1 g, respectively. We propose that increased GR activity in bolls exposed to high temperature may mitigate oxidative damage. Additionally, we conclude that ethylene inhibition (either high temperature or 1-MCP-induced) immediately after flowering (1 or 2 DPA) could potentially have positive impacts on early boll growth.

High Temperature Heater

Researchers at Baotou Research Institute of Rare Earth have been engaged in studying RE-contaning electric heating materials for years.They prepared lan-

La_(1-x)Sr_xMnO_3阴极材料的制备及性能

溶胶-凝胶法制备单相性、均匀性较好的La(1-x)SrxMnO3（x=0．1，0．2，0．3，0．4，0．5）纳米微粉系列样品，并用X射线衍射分析样品的结构类型．考察样品的烧结特性和高温电导率随晶粒尺寸的变化规律．通过电池伏安特性曲线的测量，对锰酸锶镧作为（ZrO2）0.92（Y2O3）0.08电解质燃料电池阴极的性能进行研究．

A Solar-Blind AlGaN-Based p-i-n Back-Illuminated Photodetector with a High Temperature AlN Template Layer

The growth, fabrication, and characterization of a solar-blind A1GaN-based p-i-n back-illuminated photodetector with a high temperature A1N template are reported for the first time. The photodetector was fabricated from multilayer AIx Gal-xN films grown by MOCVD on double-polished c-plane （0001） sapphire substrates. Crack free, high A1 content （0.7） A1GaN multilayer structure,designed for the solar-blind p-i-n back-illuminated photodetector,was grown on a high temperature A1N template without a nuclear layer. The high quality of the epitaxial layers is demonstrated by in-situ optical reflectance monitoring curve, triple-axis X-ray diffraction, and atomic-force microscope. At a 1.8V bias, the processed p-i-n photodetector exhibits a solar-blind photoresponse with a maximum responsivity of 0. 0864A/W at 270nm. The photodetector exhibits a forward turn-on voltage at around 3.5V and a reverse breakdown voltage above 20V, and the leakage current is below 20pA for 2V reverse bias.

真空烧结下TinO2n-1多孔电极的制备及性能

为给工业制备TinO2n-1多孔电极提供技术支持,以TiH2与TiO2为合成原料,采用高温烧结-压片法制备了TinO2n-1电极。通过扫描电镜(SEM)、X射线衍射仪(XRD)进行材料表征,探究了制备TinO2n-1电极的工艺合理性,利用电化学工作站考察了自制TinO2n-1电极的性能。结果表明:TiH2与TiO2的摩尔比为1∶5,真空下烧结温度为950℃时,可得到主相为Ti4O7的TinO2n-1电极。将自制的亚氧化钛电极与石墨电极分别进行阳极极化测试,亚氧化钛电极析氧电位维持在2.25 V,远高于石墨电极的1.60 V,在循环伏安测试中,TinO2n-1电极表现出很高的电化学稳定性。

S-Nitrosoglutathion Reductase Activity Modulates the Thermotolerance of Seeds Germination by Controlling ABI5 Stability under High Temperature

Seed germination or dormancy status is strictly controlled by endogenous phytohormone and exogenous environment signals.Abscisic acid(ABA)is the important phytohormone to suppress seed germination.Ambient high temperature(HT)also suppressed seed germination,or called as secondary seed dormancy,through upregulating ABI5,the essential component of ABA signal pathway.Previous result shows that appropriate nitric oxide(NO)breaks seed dormancy through triggering S-nitrosoglutathion reductase(GSNOR1)-dependent S-nitrosylation modification of ABI5 protein,subsequently inducing the degradation of ABI5.Here we found that HT induced the degradation of GSNOR1 protein and reduced its activity,thus accumulated more reactive nitrogen species(RNS)to damage seeds viability.Furthermore,HT increased the S-nitrosylation modification of GSNOR1 protein,and triggered the degradation of GSNOR1,therefore stabilizing ABI5 to suppress seed germination.Consistently,the ABI5 protein abundance was lower in the transgenic line overexpressing GSNOR1,but higher in the gsnor mutant after HT stress.Genetic analysis showed that GSNOR1 affected seeds germination through ABI5 under HT.Taken together,our data reveals a new mechanism by which HT triggers the degradation of GSNOR1,and thus stabilizing ABI5 to suppress seed germination,such mechanism provides the possibility to enhance seed germination tolerance to HT through genetic modification of GNSOR1.

不同抗原修复方法对食管鳞癌组织中ANO1蛋白染色的影响

目的:探讨不同修复条件及修复液对食管鳞癌组织中ANO1的阳性表达程度的影响,筛选优势抗原修复方法。方法:对30例食管鳞癌组织的石蜡切片分别采用高压-枸橼酸缓冲液修复法、高压-EDTA缓冲液修复法、微波-枸橼酸缓冲液修复法及微波-EDTA缓冲液修复法进行修复,检测ANO1蛋白免疫组化染色效果。结果:食管鳞癌组织中ANO1蛋白经高压-枸橼酸缓冲液修复后,着色强度较其他修复方法明显增强,且阳性定位准确、对比度清晰,极大降低免疫组化背景着色。结论:在ANO1蛋白免疫组织化学染色中,高压-枸橼酸缓冲液修复法优于其他抗原修复方法。

High temperature characteristics of AlGaN/GaN high electron mobility transistors

Direct current （DC） and pulsed measurements are performed to determine the degradation mechanisms of A1GaN/GaN high electron mobility transistors （HEMTs） under high temperature. The degradation of the DC characteristics is mainly attributed to the reduction in the density and the mobility of the two-dimensional electron gas （2DEG）. The pulsed measurements indicate that the trap assisted tunneling is the dominant gate leakage mechanism in the temperature range of interest. The traps in the barrier layer become active as the temperature increases, which is conducive to the electron tunneling between the gate and the channel. The enhancement of the tunneling results in the weakening of the current collapse effects, as the electrons trapped by the barrier traps can escape more easily at the higher temperature.

Plastic Flow Modeling of Ti-5 Al-2 Sn-2 Zr-4 Mo-4 Cr Alloy at Elevated Temperatures and High Strain Rates

The true stress-sWain relationships of Ti-5A1-2Sn-2Zr-4Mo-4Cr（TC17） alloy with a wide range of strain rates were investigated by tmiaxial quasi-static and dynamic compression tests, respectively. Quasi- static compression tests were carried out with Instron 8874 test machine, while dynamic compression tests were performed with the split Hopkinson pressure bar （SHPB） which was installed with heating device and synchro- assembly system. The dynamic mechanical behaviors tests of TC17 were carded out from room temperature to 800 ℃ at intervals of 200 ℃ and at high sWain rates （5 500-1 9200 s-l）. The stress-strain curves considering temperature-sWain rate coupling actions were obtained. The Johnson-Cook constitutive model was developed through data fitting of the stress-sWain curves. The material constants in the developed constitutive model can be determined using isothermal and adiabatic stress-strain curves at different strain rates. The Johnson-Cook constitutive model provided satisfied prediction of the plastic flow stress for TC17 alloy.

Channel temperature determination of a multifinger AlGaN/GaN high electron mobility transistor using a micro-Raman technique

Self-heating in a multifinger A1GaN/GaN high electron mobility transistor （HEMT） is investigated by micro-Raman spectroscopy, The device temperature is probed on the die as a function of applied bias. The operating temperature of the A1GaN/GaN HEMT is estimated from the calibration curve of a passively heated A1GaN/GaN structure. A linear increase of junction temperature is observed when direct current dissipated power is increased. When the power dissipation is 12.75 W at a drain voltage of 15 V, a peak temperature of 69.1 ℃ is observed at the gate edge on the drain side of the central finger. The position of the highest temperature corresponds to the high-field region at the gate edge.

Bna-novel-miR311-HSC70-1模块调控甘蓝型油菜响应热胁迫的机制

HSP70(heat shock protein 70)参与植物热胁迫应答,增强植物耐热性,但目前油菜中尚无miRNA调控HSP70基因的报道。本研究novel-miR311是利用高通量技术在甘蓝型油菜茎尖中筛选出的新miRNA。novel-miR311存在于油菜而不存在于拟南芥中, 5’-RACE技术证实其2个靶基因属热应激同源蛋白基因HSC70-1 (HSP70家族),在甘蓝型油菜体内被剪切。构建novel-miR311超表达载体,转化拟南芥和甘蓝型油菜,其转基因阳性苗中HSC70-1基因表达量显著下降。高温胁迫试验表明,拟南芥和甘蓝型油菜热胁迫后,其阳性苗的生长势和存活率显著低于其对应的对照。qPCR结果显示,油菜中HSC70-1基因表达量热胁迫后较热胁迫前上升。上述结果表明,油菜novel-miR311介导HSC70-1基因的剪切降低了拟南芥和甘蓝型油菜耐热性。

A double-layer heating method to generate high temperature in a two-stage multi-anvil apparatus

A new heating method is proposed to increase the cell temperature of the 6-8 type multi-anvil apparatus without reducing the volume of the sample chamber. The double-layer heater assembly (DHA) has two layers of heaters connected in parallel. The temperature of the cell was able to reach 2500 ℃ by using 0.025 mm rhenium foils, and the temperature limit was increased by 25% compared with that of the traditional single-layer assembly. The power-temperature relationships for these two assemblies with different sizes were calibrated by using W/Re thermocouple at 20 GPa. When the volume of samples was the same, the DHA not only attained higher temperature, but also kept the holding time longer, compared to the traditional assembly. The results of more than ten experiments showed that the new 10/4 DHA with a relatively large sample size (2 mm in diameter and 4 mm in height) can work stably with the center temperature of the sample cavity exceeding 2300 ℃ under the pressure of 20 GPa.

Influence of Firing Temperature on Properties of High Alumina Bricks

To reduce production costs and make full and reasonable use of raw materials,high alumina bricks were prepared using tabular corundum and mullite as aggregates,sillimanite as intermediate particles,and white fused corundum powder,α-alumina micropowder,and Suzhou soil as the matrix,firing at different temperatures(1420,1440,1460,1480,1500 and 1520℃)for 4 h.The apparent porosity(AP),the bulk density(BD),the cold crushing strength(CCS),the thermal shock resistance(TSR),the refractoriness under load(RUL)and the creep rate of the samples were tested.The effects of the firing temperature on the creep rate(1450℃×50 h,under a load of 0.2 MPa)of the samples were studied.The results show that with the sillimanite addition of 22.5 mass%,the sample fired at 1460℃for 4 h performs the best comprehensive properties:the AP of 17.5%,the BD of 2.75 g·cm^(-3),the CCS of 100.5 MPa,the TSR number of 35 cycles,the RUL of 1682℃,and the creep rate of-0.428%,which can prolong the service life of furnaces.

HTRA丝氨酸肽酶1基因杂合突变致相关脑小血管病一家系报道

HTRA丝氨酸肽酶1(HTRA1)相关脑小血管病(CSVD)较罕见,尽早诊断和治疗可改善预后。作者报道南昌大学第二附属医院神经内科收治的1例37岁、男性患者,以一过性右侧肢体无力为首发症状,影像学提示脑白质病变,基因检测显示HTRA1(c.854 C>T/p.Pro285Leu)杂合突变,最终诊断为HTRA1相关CSVD。对其家系成员进行调查,其特点为:罹患缺血性脑血管病,伴颈椎、腰椎间盘突出,男性患者伴脱发,部分患者存在认知功能障碍,男性比女性发病年龄早,发病年龄逐代提前。因此,对于青年缺血性脑血管病伴随脱发、认知功能障碍、颈椎或腰椎间盘突出,影像学提示明显脑白质病变,尤其不伴有常见脑血管病危险因素的患者,应追问家族史,并进行基因检测筛查HTRA1基因突变位点。

HTRA丝氨酸肽酶1基因杂合突变相关脑小血管病一例

报道1例诊断为HTRA丝氨酸肽酶1(HTRA1)基因杂合突变相关脑小血管病(CSVD)的52岁女性患者。该例患者既往无高血压病、糖尿病史,无烟酒嗜好;其外祖父、外祖母为近亲结婚,外祖母及母亲死于脑梗死;临床表现为复发性脑梗死、轻度认知障碍,头部MRI示多发腔隙性脑梗死、广泛脑白质变性和微出血病灶;全外显子组基因检测报告示HTRA1 c.947A>G杂合突变。对于CSVD患者应追问其家族史,对疑似遗传性CSVD患者,需考虑存在HTRA1基因杂合突变的可能;并合理借助基因检测方法,筛选CSVD高危家族患者并进一步指导治疗。

高温下1-己烯在H-ZSM-5催化剂上的裂化反应机理和反应路径

采用固定床反应器考察了1-己烯在反应温度为500~750℃范围内在H-ZSM-5沸石和石英砂上的裂化反应。在此基础上,建立了催化/热裂化占比模型,定量地讨论了高温下催化裂化和热裂化反应的关系。另外,根据1-己烯在H-ZSM-5沸石上裂化反应的产物分布,对其反应路径进行了推导和估算。结果表明:1-己烯在H-ZSM-5沸石上的高温反应以催化裂化为主。即使在750℃高温下,1-己烯通过催化裂化反应进行转化的占比仍然高达91.32%。产物中甲烷、乙烯和丙烯等主要来源于催化裂化反应,而不是热裂化反应。对1-己烯裂化反应路径的估算发现,双分子齐聚裂化反应占比由500℃时的74%下降到700℃时的0。单分子直接裂化反应有利于生成乙烯和丙烯等小分子烯烃,而双分子齐聚裂化反应有利于生成较大分子烯烃。高温下乙烯和丙烯产率较高的原因可能是高温促进了1-己烯的单分子直接裂化反应。