Dynamic graph exploration by interactively linked node-link diagrams and matrix visualizations

The visualization of dynamic graphs is a challenging task owing to the various properties of the underlying relational data and the additional time-varying property.For sparse and small graphs,the most efficient approach to such visualization is node-link diagrams,whereas for dense graphs with attached data,adjacency matrices might be the better choice.Because graphs can contain both properties,being globally sparse and locally dense,a combination of several visual metaphors as well as static and dynamic visualizations is beneficial.In this paper,a visually and algorithmically scalable approach that provides views and perspectives on graphs as interactively linked node-link and adjacency matrix visualizations is described.As the novelty of this technique,insights such as clusters or anomalies from one or several combined views can be used to influence the layout or reordering of the other views.Moreover,the importance of nodes and node groups can be detected,computed,and visualized by considering several layout and reordering properties in combination as well as different edge properties for the same set of nodes.As an additional feature set,an automatic identification of groups,clusters,and outliers is provided over time,and based on the visual outcome of the node-link and matrix visualizations,the repertoire of the supported layout and matrix reordering techniques is extended,and more interaction techniques are provided when considering the dynamics of the graph data.Finally,a small user experiment was conducted to investigate the usability of the proposed approach.The usefulness of the proposed tool is illustrated by applying it to a graph dataset,such as e co-authorships,co-citations,and a Comprehensible Perl Archive Network distribution.

Visualizing ordered bivariate data on node-link diagrams

Node-link visual representation is a widely used tool that allows decision-makers to see details about a network through the appropriate choice of visual metaphor.However,existing visualization methods are not always effective and efficient in representing bivariate graph-based data.This study proposes a novel node-link visual model–visual entropy(Vizent)graph–to effectively represent both primary and secondary values,such as uncertainty,on the edges simultaneously.We performed two user studies to demonstrate the efficiency and effectiveness of our approach in the context of static nodelink diagrams.In the first experiment,we evaluated the performance of the Vizent design to determine if it performed equally well or better than existing alternatives in terms of response time and accuracy.Three static visual encodings that use two visual cues were selected from the literature for comparison:Width-Lightness,Saturation-Transparency,and Numerical values.We compared the Vizent design to the selected visual encodings on various graphs ranging in complexity from 5 to 25 edges for three different tasks.The participants achieved higher accuracy of their responses using Vizent and Numerical values;however,both Width-Lightness and Saturation-Transparency did not show equal performance for all tasks.Our results suggest that increasing graph size has no impact on Vizent in terms of response time and accuracy.The performance of the Vizent graph was then compared to the Numerical values visualization.The Wilcoxon signed-rank test revealed that mean response time in seconds was significantly less when the Vizent graphs were presented,while no significant difference in accuracy was found.The results from the experiments are encouraging and we believe justify using the Vizent graph as a good alternative to traditional methods for representing bivariate data in the context of node-link diagrams.

Curved Spine:The Shape of Spine in Taoist Body Diagrams and Its Influence on Medical Body Diagrams

From the early Taoist diagrams of the human body to the end of the Qing dynasty and the beginning of the Republic of China,Taoists exaggerated and deformed the human spine in a shape-shifting manner.It is likely that medical practitioners were influenced by this style of representation,and there are also numerous diagrams of the human body with the curved spine in the lateral-view diagrams of viscera and Ming Tang Tu(明堂图Acupuncture and Moxibustion Chart),which constantly show the human torso in an elliptical“egg shape”.No later than the Ming dynasty,medical practitioners began to depict the actual physiological spinal curve of the human body.By the Qing dynasty,the depiction of the spinal curve in medical diagrams of the human figure showed a tendency to part ways with the Taoist freehand style of the previous generation.Although the representation of the curve of the spine was very crude,later medical images of the human body at least gradually straightened the spine and no longer depicted it in a shape-shifting manner.However,the curved spine in Taoist diagrams of the human body continued to exist,and the presentation of the curved spine never changed.This way of depicting its appearance,which is very different from reality,is shaped by Taoism's special way of perceiving and viewing the body,and may also contain another form of truth.

A Future Life of Binary Phase Diagrams

The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reliability must be complete. However, the discovery of the “ordering-separation” phase transition, which showed that in binary alloys at certain temperatures the sign of the chemical interatomic interaction changes (and, consequently, the microstructure changes), forces us to reconsider our ideas about those areas. Currently, these areas are designated on diagrams as areas of a “disordered solid solution.” This article proposes, using transmission electron microscopy, to study all the so-called solid solution regions, and apply the results obtained to the studied regions of the phase diagram.

Petrochemical eigenvalues and diagrams for the identification of metamorphic rocks'protolith,taking the host rocks of Dashuigou tellurium deposit in China as an example

The Dashuigou tellurium deposit is the world’s only known independent tellurium deposit.By restoring metamorphic rocks’protolith,we seek to understand not only the development and evolution trajectory of the region but also the origin of the relevant deposits.While there are many ways to restore metamorphic rocks’protolith,we take the host metamorphic rocks of Dashuigou tellurium deposit and leverage various petrochemical eigenvalues and related diagrams previously proposed to reveal the deposit’s host metamorphic rocks’protolith.The petrochemical eigenvalues include molecular number,Niggli’s value,REE parity ratio,CaO/Al_(2)O_(3)ratio,Fe^(3+) /(Fe^(3+) -+Fe^(2+) )ratio,chondrite-normalized REE value,logarithmic REE value,various REE eigenvalues including scandium,Eu/Sm ratio,total REE amount,light and heavy REEs,δEu,Eu anomaly,Sm/Nd ratio,and silicon isotope δ^(30) SiNBS-29‰,etc.The petrochemical plots include ACMs,100 mg-c-(al+alk),SiO_(2)-(Na_(2)O+K_(2)O),(al+fm)-(c+alk)versus Si,FeO+Fe_(2)O^(3+) TiO)-Al_(2)O_(3)-MgO,c-mg,Al_(2)O_(3)-(Na_(2)O+K_(2)O),chondrite-normalized REE model,La/Yb-REE,and Sm/Nd ratio,etc.On the basis of these comprehensive analyses,the following conclusions are drawn,starting from the many mantle-derived types of basalt developed in the study area of different geological ages,combined with the previously published research results on the deposit s fluid inclusions and sulfur and lead isotopes.The deposit is formed by mantle degassing in the form of a mantle plume in the late Yanshanian orogeny.The degassed fluids are rich in nano-sc ale substances including Fe,Te,S,As,Bi,Au,Se,H_(2),CO_(2),N_(2),H_(2)O,and CH_(4),which are enriched by nano-effect,and then rise to a certain part of the crust in the form of mantle plume along the lithospheric fault to form the deposit.The ultimate power for tellurium mineralization was from H_(2)flow with high energy,which was produced through radiation from the melted iron of the Earth’s outer core.The H,flow results in the Earth’s degassing,as well as the mantle and crust’s uplift.

Solving Algebraic Problems with Geometry Diagrams Using Syntax-Semantics Diagram Understanding

Solving Algebraic Problems with Geometry Diagrams(APGDs)poses a significant challenge in artificial intelligence due to the complex and diverse geometric relations among geometric objects.Problems typically involve both textual descriptions and geometry diagrams,requiring a joint understanding of these modalities.Although considerable progress has been made in solving math word problems,research on solving APGDs still cannot discover implicit geometry knowledge for solving APGDs,which limits their ability to effectively solve problems.In this study,a systematic and modular three-phase scheme is proposed to design an algorithm for solving APGDs that involve textual and diagrammatic information.The three-phase scheme begins with the application of the statetransformer paradigm,modeling the problem-solving process and effectively representing the intermediate states and transformations during the process.Next,a generalized APGD-solving approach is introduced to effectively extract geometric knowledge from the problem’s textual descriptions and diagrams.Finally,a specific algorithm is designed focusing on diagram understanding,which utilizes the vectorized syntax-semantics model to extract basic geometric relations from the diagram.A method for generating derived relations,which are essential for solving APGDs,is also introduced.Experiments on real-world datasets,including geometry calculation problems and shaded area problems,demonstrate that the proposed diagram understanding method significantly improves problem-solving accuracy compared to methods relying solely on simple diagram parsing.

Prediction and Verifcation of Forming Limit Diagrams Based on a Modifed Shear Failure Criterion

The forming limit diagram plays an important role in predicting the forming limit of sheet metals.Previous studies have shown that,the method to construct the forming limit diagram based on instability theory of the original shear failure criterion is efective and simple.The original shear instability criterion can accurately predict the left area of the forming limit diagram but not the right area.In this study,in order to improve the accuracy of the original shear failure criterion,a modifed shear failure criterion was proposed based on in-depth analysis of the original shear failure criterion.The detailed improvement strategies of the shear failure criterion and the complete calculation process are given.Based on the modifed shear failure criterion and diferent constitutive equations,the theoretical forming limit of TRIP780 steel and 5754O aluminum alloy sheet metals are calculated.By comparing the theoretical and experimental results,it is shown that proposed modifed shear failure criterion can predict the right area of forming limit more reasonably than the original shear failure criterion.The efect of the pre-strain and constitutive equation on the forming limits are also analyzed in depth.The modifed shear failure criterion proposed in this study provides an alternative and reliable method to predict forming limit of sheet metals.

Reliability Analysis of Satellite Turntable System under Multiple Operation Modes Based on Multi-Valued Decision Diagrams

As a payload support system deployed on satellites,the turntable system is often switched among different working modes during the on-orbit operation,which can experience great state changes.In each mode,the missions to be completed are different,consecutive and non-over-lapping,from which the turntable system can be considered to be a phased-mission system(PMS).Reliability analysis for PMS has been widely studied.However,the system mode cycle characteristic has not been taken into account before.In this paper,reliability analysis method of the satellite turntable system is proposed considering its multiple operation modes and mode cycle characteristic.Firstly,the multi-valued decision diagrams(MDD)manipulation rules between two adjacent mission cycles are proposed.On this basis,MDD models for the turntable system in different states are established and the reliability is calculated using the continuous time Markov chains(CTMC)method.Finally,the comparative study is carried out to show the effectiveness of our proposed method.

Phase diagram and quench dynamics of a periodically drivenHaldane model

We investigate a periodically driven Haldane model subjected to a two-stage driving scheme in the form of a step function.By using the Floquet theory,we obtain the topological phase diagram of the system.We also find that anomalous Floquet topological phases exist in the system.Focusing on examining the quench dynamics among topological phases,we analyze the site distribution of the 0-mode and p-mode edge states in long-period evolution after a quench.The results demonstrate that,under certain conditions,the site distribution of the 0-mode can be confined at the edge even in long-period evolution.Additionally,both the 0-mode and p-mode can recover and become confined at the edge in long-period evolution when the post-quench parameters(T,M_(2) /M_(1))in the phase diagram cross away from the phase boundary (M_(2)/ M_(1))=(6√3t2)/ (M_(1)−1.Furthermore,we conclude that whether the edge state is confined at the edge in the long-period evolution after a quench depends on the similarity of the edge states before and after the quench.Our findings reveal some new characteristics of quench dynamics in a periodically driven system.

Predominance diagrams for Zn(Ⅱ)-NH_3-Cl^--H_2O system

The thermodynamics in zinc hydrometallurgical process was studied using a chemical equilibrium modeling code（GEMS） to predict the zinc solubility and construct the species distribution and predominance diagrams for the Zn（Ⅱ）-NH3-H2O and Zn（Ⅱ）-NH3-Cl--H2O system.The zinc solubilities in ammoniacal solutions were also measured with equilibrium experiments,which agree well with the predicted values.The distribution and predominance diagrams show that ammine and hydroxyl ammine complexes are the main aqueous Zn species,Zn（NH3）24-is predominant in weak alkaline solution for both Zn（Ⅱ）-NH3-H2O and Zn（Ⅱ）-NH3-Cl--H2O systems.In Zn（Ⅱ）-NH3-Cl--H2O system,the ternary complexes containing ammonia and chloride increase the zinc solubility in neutral solution.There are three zinc compounds,Zn（OH）2,Zn（OH）1.6Cl0.4 and Zn（NH3）2Cl2,on which the zinc solubility depends,according to the total ammonia,chloride and zinc concentration.These thermodynamic diagrams show the effects of ammonia,chloride and zinc concentration on the zinc solubility,which can provide thermodynamic references for the zinc hydrometallurgy.

Holographic alloy positioning design system and holographic network phase diagrams of Au-Cu system

Taking Au?Cu system as an example, three discoveries and two methods were presented. First, a new way for boosting sustainable progress of systematic metal materials science (SMMS) and alloy gene engineering (AGE) is to establish holographic alloy positioning design (HAPD) system, of which the base consists of measurement and calculation center, SMMS center, AGE center, HAPD information center and HAPD cybernation center; Second, the resonance activating-sychro alternating mechanism of atom movement may be divided into the located and oriented diffuse modes; Third, the equilibrium and subequilibrium holographic network phase diagrams are blueprints and operable platform for researchers to discover, design, manufacture and deploy advanced alloys, which are obtained respectively by the equilibrium lever numerical method and cross point numerical method of isothermal Gibbs energy curves. As clicking each network point, the holographic information of three structure levels for the designed alloy may be readily obtained: the phase constitution and fraction, phase arranging structure and properties of organization; the composition, alloy gene arranging structure and properties of each phase and the electronic structures and properties of alloy genes. It will create a new era for network designing advanced alloys.

Solubility and phase diagrams of hydroxyl manganese chloride

In the course of the basic research on the ammonia-evaporation reaction of manganese monoxide （MnO）, hydroxyl manganese chloride （Mn2（OH）3Cl） was found. The solubility and phase diagrams of the hydroxyl manganese chloride were investigated. The aqueous thermostat and vibrating bed were used to determine the solubility of hydroxyl manganese chloride in water, ammonium chloride and manganese chloride system, and the phase diagrams of multicomponent system were drawn. The research results indicate that hydroxyl manganese chloride has been produced in laboratory and is in favor of the solid-liquid separation at high temperature.

Establishment of continuous cooling transformation diagrams of aluminum alloys using in situ voltage measurement

An effective method was proposed to establish the continuous cooling transformation（CCT） diagrams of aluminum alloys using in situ voltage measurement.The voltage change of samples with predefined dimension was recorded under the constant current state during continuous cooling.Solutionizing time,together with starting and finishing temperatures of phase transformation of the alloy can be obtained from relationships of voltage vs time and temperature.A critical cooling rate without detectable phase transition during continuous cooling can be determined.Continuous cooling transformation diagrams of tested samples can be established conveniently based on these results.Microstructure observation and differential scanning calorimetry（DSC） testing were applied to verify the reliability of continuous cooling transformation diagram.

Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of AuCu_3-type sublattice system

Taking AuCu3-type sublattice system as an example, three discoveries have been presented: First, the third barrier hindering the progress in metal materials science is that researchers have got used to recognizing experimental phenomena of alloy phase transitions during extremely slow variation in temperature by equilibrium thinking mode and then taking erroneous knowledge of experimental phenomena as selected information for establishing Gibbs energy function and so-called equilibrium phase diagram. Second, the equilibrium holographic network phase diagrams of AuCu3-type sublattice system may be used to describe systematic correlativity of the composition?temperature-dependent alloy gene arranging structures and complete thermodynamic properties, and to be a standard for studying experimental subequilibrium order-disorder transition. Third, the equilibrium transition of each alloy is a homogeneous single-phase rather than a heterogeneous two-phase, and there exists a single-phase boundary curve without two-phase region of the ordered and disordered phases; the composition and temperature of the top point on the phase-boundary curve are far away from the ones of the critical point of the AuCu3 compound.

Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of Au_3Cu-type sublattice system

Taking Au3Cu-type sublattice system as an example, three discoveries have been presented. First, the fourth barrier to hinder the progress of metal materials science is that today’s researchers do not understand that the Gibbs energy function of an alloy phase should be derived from Gibbs energy partition function constructed of alloy gene sequence and their Gibbs energy sequence. Second, the six rules for establishing alloy gene Gibbs energy partition function have been discovered, and it has been specially proved that the probabilities of structure units occupied at the Gibbs energy levels in the degeneracy factor for calculating configuration entropy should be degenerated as ones of component atoms occupied at the lattice points. Third, the main characteristics unexpected by today’s researchers are as follows. There exists a single-phase boundary curve without two-phase region coexisting by the ordered and disordered phases. The composition and temperature of the top point on the phase-boundary curve are far away from those of the critical point of the Au3Cu compound; At 0 K, the composition of the lowest point on the composition-dependent Gibbs energy curve is notably deviated from that of the Au3Cu compounds. The theoretical limit composition range of long range ordered Au3Cu-type alloys is determined by the first jumping order degree.

Informational digital diagrams applied to predict spring wind,snow,and sandstorms

Using informational digital diagrams, we analyzed the snow event that occurred on Feb 26, 2006 and the sandstorm on Apr 11, 2006 in Xi＇an. Results indicate that, under similar weather circumstances, different events evidently exhibit unique vertical structure features. Informational digital diagrams provide a method for transitional weather prediction, a problem for present extrapolative analysis system.

Thermodynamic Modeling and Phase Diagrams of Hexagonal and Cubic GaN Single-Crystal FilmGrowth by ECR-PEMOCVD Method

Based on thermodynamic equilibrium theory,a chemical equilibrium model for GaN g rowth is given in electron cyclotron resonance plasma enhanced metalorganic chem ical vapor deposition (ECR-PEMOCVD) system.Calculation indicates that the growt h driving force are functions of growth conditions:group Ⅲ input partial press ure,input Ⅴ/Ⅲ ratio,and growth temperature.Furthermore,the growth phase diag rams of hexagonal and cubic GaN film growth are obtained,which are consistent wi th our experimental conditions to some extent.Through analysis,it is explained t he reason that high temperature and high input Ⅴ/Ⅲ ratio are favorable for he xagonal GaN film growth.This model can be extended to the similar systems used f or GaN single-crystal film growth.

Development of advanced materials based on phase diagrams and microstructural control

Recent progress on research activities of phase diagrams in our laboratory has been presented. Experimental studies and thermodynamic calculations based on CALPHAD (Calculation of Phase Diagrams) method have been conducted in the following alloy systems.1.Database on microalloying steels including carbide, nitride and sulfide is now being constructed.2.ADAMIS (Alloy Database for Micro-Solders) containing 8 elements of Ag, Bi, Cu,In, Sb, Sn, Zn and Pb has been constructed, which can handle all combinations of these elements and all composition ranges.3.A thermodynamic database of Cu-base alloys including Cu-X binary system and Cu-Fe, Cu-Ni, Cu-Cr base ternary systems has been constructed.4.Experimental and thermodynamic calculations on Fe, Ni, Co and Ti aluminides have been conducted.5.Experimental and thermodynamic calculations on Co base magnetic recording media have been conducted.6.Thermodynamic analysis of interaction between magnetic and chemical orderings has been performed.By utilizing the information on phase diagrams, the following advanced materials have been developed. (A)New type of high speed steel with high hardness about Hv≈1000 by carbide dispersion carburizing method. (B)New Pb-free machinable stainless steel using titanium carbosulphide. (C)New Pb-free solder for Die-attaching use. (D)Shape memory alloys; Cu-base, Ferromagnetic Ni-base and Fe-base. (E)Invar alloys. (F)Egg-type powder.Typical examples of phase diagrams, phase stability, database and its application for the development of advanced materials will be presented.

Energy Absorption Diagrams of Multi-layer Corrugated Boards

Based on the static compression experiments, the compressive stress-strain curve of multi-layer corrugated boards is simplified into three sections of linear elasticity, sub-buckling going with local collapse and densification. By considering the structure factors of multi-layer corrugated boards, the energy absorption model is obtained and characterized by the structure factors of corrugated cell-wall. The model is standardized by the solid modulus and it is universal for corrugated structures of different basis material. In the liner-elastic section, with the increase of the load, the energy absorption per unit volume of multi-layer corrugated boards gradually increases; in the sub-buckling section going with local collapse, the compression resistance of multi-layer corrugated boards goes on under a nearly constant load, but the energy absorption per unit volume rapidly increases with the increase of the compression strain. It is shown as an ascending curve in the energy absorption diagram. In the densification section, the corrugated sandwich core has no energy absorption capability. A good consistency is achieved between theoretical and experimental energy absorption curves. In designing the cushioning package, the cushioning properties can be evaluated by the theoretical model without more experiments. The suggested method to develop the energy absorption diagram for corrugated boards can be used to characterize the cushioning properties and optimize the structures of corrugated sandwich structures.

New formulae for calculating activities from binary system phase diagrams containing solid solution by introducing the parameterθ

New formulae for calculating activities and activity coefficients from binary phase diagrams containing solidsolution are presented. In the new formulae, a parameterθ is introduced. It seems be more efficient The application ofthese formulae to system Ag-Pb proves its efficiency.