Assessing the corrosion protection property of coatings loaded with corrosion inhibitors using the real-time atmospheric corrosion monitoring technique

The atmospheric corrosion monitoring(ACM)technique has been widely employed to track the real-time corrosion behavior of metal materials.However,limited studies have applied ACM to the corrosion protection properties of organic coatings.This study compared a bare epoxy coating with one containing zinc phosphate corrosion inhibitors,both applied on ACM sensors,to observe their corrosion protection properties over time.Coatings with artificial damage via scratches were exposed to immersion and alternating dry and wet environments,which allowed for monitoring galvanic corrosion currents in real-time.Throughout the corrosion tests,the ACM currents of the zinc phosphate/epoxy coating were considerably lower than those of the blank epoxy coating.The trend in ACM current variations closely matched the results obtained from regular electrochemical tests and surface analysis.This alignment highlights the potential of the ACM technique in evaluating the corrosion protection capabilities of organic coatings.Compared with the blank epoxy coating,the zinc phosphate/epoxy coating showed much-decreased ACM current values that confirmed the effective inhibition of zinc phosphate against steel corrosion beneath the damaged coating.

Advancements in enhancing corrosion protection of Mg alloys:A comprehensive review on the synergistic effects of combining inhibitors with PEO coating

Magnesium(Mg)alloys are lightweight materials with excellent mechanical properties,making them attractive for various applications,including aerospace,automotive,and biomedical industries.However,the practical application of Mg alloys is limited due to their high susceptibility to corrosion.Plasma electrolytic oxidation(PEO),or micro-arc oxidation(MAO),is a coating method that boosts Mg alloys'corrosion resistance.However,despite the benefits of PEO coatings,they can still exhibit certain limitations,such as failing to maintain long-term protection as a result of their inherent porosity.To address these challenges,researchers have suggested the use of inhibitors in combination with PEO coatings on Mg alloys.Inhibitors are chemical compounds that can be incorporated into the coating or applied as a post-treatment to further boost the corrosion resistance of the PEO-coated Mg alloys.Corrosion inhibitors,whether organic or inorganic,can act by forming a protective barrier,hindering the corrosion process,or modifying the surface properties to reduce susceptibility to corrosion.Containers can be made of various materials,including polyelectrolyte shells,layered double hydroxides,polymer shells,and mesoporous inorganic materials.Encapsulating corrosion inhibitors in containers fully compatible with the coating matrix and substrate is a promising approach for their incorporation.Laboratory studies of the combination of inhibitors with PEO coatings on Mg alloys have shown promising results,demonstrating significant corrosion mitigation,extending the service life of Mg alloy components in aggressive environments,and providing self-healing properties.In general,this review presents available information on the incorporation of inhibitors with PEO coatings,which can lead to improved performance of Mg alloy components in demanding environments.

Smart composite antibacterial coatings with active corrosion protection of magnesium alloys

A new method of the formation of composite coatings with the function of active corrosion protection of magnesium alloys was developed using the plasma electrolytic oxidation(PEO) method. Susceptibility of PEO-layers to pitting formation was evaluated using localized electrochemical methods(SVET/SIET). The morphological features and electrochemical properties of composite coatings were studied using SEM/EDX, XRD, micro-Raman spectroscopy and EIS/PDP measurements, respectively. The effect of surface layers impregnation with corrosion inhibitor on their protective properties in a corrosive environment was established. Additional protection was achieved using controllable coating pore sealing with polymer. It was found that the polymer treatment of the PEO-layer does not reduce the inhibitor’s efficiency. The formed protective composite inhibitor-and-polymer-containing layers decrease the corrosion current density of a magnesium alloy in a 3 wt.% Na Cl solution to three orders of magnitude. This predetermines the prospect of new smart coatings formation that significantly expand the field of application of electrochemically active materials. The mechanism of smart composite coating corrosion degradation was established. The antibacterial activity of the inhibitor-containing coatings against S. aureus methicillin-resistant strain was proved using the in vitro model. These protective layers are promising for reducing the incidence of implant-associated infections.

SiC/Si-W-Mo coating for protection of C/C composites at 1873 K

In order to prevent carbon/carbon composites from oxidation at 1873 K, an efficient oxidation protective SiC/Si-W-Mo coating was prepared by a two-step pack cementation technique. The microstructures and the phase composition of the as-received multi-coating were examined by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. It is seen that the compact multi-coating is composed of α-SiC, Si, and （WxMO1-x）Si2. Oxidation test shows that, after oxidation at 1873 K in air for 102 h and thermal cycling between 1873 K and room temperature for 10 times, the weight loss of the SiC/Si-W-Mo coated C/C composites is only 0.26%. The invalidation of the multi-coating is attributed to the formation of penetrable cracks in the coating. 2008 University of Science and Technology Beijing. All rights reserved.

Corrosion Protection of AM50 Magnesium Alloy by Nafion/DMSO Organic Coatings

The effectiveness of the corrosion protection of Nafion/Dimethysulfoxid （DMSO） organic coatings for AM50 magnesium alloy prepared by simple immersion and heat treatment was investigated. Its corrosion resistance and morphologies of the Nafion/DMSO organic coatings were studied by electrochemical corrosion testing and optical microscopy. The results show that Nafion/DMSO organic coatings can improve the corrosion resistance of AM50 magnesium alloy effectively. Also, the corrosion resistance increases with the surface density of the organic coatings.

A route for large-scale preparation of multifunctional superhydrophobic coating with electrochemically-modified kaolin for efficient corrosion protection of magnesium alloys

Superhydrophobic coating has been widely studied for its great applicational potential, such as for corrosion protection of magnesium alloys while it has been restrained by expensive materials, sophisticated preparation process and infirm rough structures. In this study, the electrochemical method was adopted by using a two-electrode system for rapid hydrophobic modification to obtain superhydrophobic kaolin.By mixing the modified superhydrophobic kaolin with commercial epoxy resin and polydimethylsiloxane glue, a paint can be formed and easily used on various substrates for preparation of superhydrophobic coating via spraying method. The influence factors on wettability of the modified kaolin and the mixing ratio of each component of the coating were explored. Also, the wettability, durability and anticorrosion of the prepared coating were evaluated comprehensively. The coating was able to maintain superhydrophobic after immersed in HCl solution at pH 1, the NaOH solution at pH 14, and 3.5 wt.% NaCl solution for 16, 21, 30 days, respectively. In addition, the coating exhibited 4A grade adhesion, high hydrophobicity after abraded for 200 cycles on a 600-mesh sandpaper with 100 g weight, and 99.86% anticorrosion efficiency after soaked in 3.5 wt.% NaCl solution for 20 days, demonstrating a good robustness and anti-corrosion property. Furthermore, the coating showed good transparency, flexibility and was easy to make in a large scale by the spraying method, which is of great significance to promote the practical application of superhydrophobic coatings and the anticorrosion Mg alloys.

Preparation and Microstructure of a Si-Mo Fused Slurry Coating on Carbon/Carbon Composites for Oxidation Protection

A coating of composition Si-40Mo (wt pct) was prepared by fused slurry coating method on the two-dimensional carbon/carbon (2D-C/C) composite to improve oxidation resistance. In the procedure of the fabrication, pure St slurry inner layer in the pre-coating was necessary to apply because of infiltration of liquid Si into the substrate during the sintering. The coating consists of Si continuous phase and MoSi2 particles. In addition, the infiltration of Si into the substrate and the SiC reaction layer between the coating and the C/C composite were observed. Oxidation behavior of coated and uncoated C/C composites was studied in cyclic mode. The oxidation resistance and the thermal shock resistance of the Si-Mo fused slurry coating were quite excellent at 1370℃.

TiO_2-Siloxane Thermal Control Coatings for Protection of Spacecraft Polymers

This article describes the properties of TiO_2-siloxane that can be appliedto spacecraft polymers to protect from AO environmental influences on the life and performance ofspace mission. This protective coating is obtained by mixing TiO_2, siloxane and silicate mineralsvia dispersion and ground. Kaptons with and without TiO_2-siloxane overcoating are exposed to AOimpingement from ground-simulation laboratory. Fourier transform infrared spectroscopy (FTIR) ,LAMBDA-9 spectrophotometer, X-ray photoelectron spectroscopy (XPS) and scanning electronmicroscopy(SEM) are used to characterize the chemical and physical changes on the surfaces of theunprotected Kapton and protected Kapton samples . The application of protective coatings and theirresistance to the space environment are described for ground-based test. From the test results itcan be seen that Kapton is heavily eroded, while there is little change on surface ofTiO_2-siloxane. So it can be concluded that TiO_2-siloxane coatings are highly resistant to AO andthat it is a kind of protective coating for Kapton.

Coating Protection for Production Facilities of Offshore Oil Fields

This paper describes coating protection of production facilities of offshore oil fields based on the practice of development of Bohai Offshore Oil Field, with focus laid on the selection of coating systems, surface preparation, coating application, as well as coating inspection for four types of major production facilities.

TEMPERATURE EFFECT ON OXIDATION PROTECTION LIFE OF MULTI-LAYER COATING FOR C/C COMPOSITES

A multi-layer coating for carbon-carbon composites with a Si-W outer layer,a SiC barrier layer and a SiC transition layer is prepared by the combination of siliconiza-tion, CVD and liquid reaction method. The effect of temperature on the oxidation protec-tion life from 1600 to 17OOC is investigated. The thickness of the oxide film on thecoating surface is measured through SEM and EMPA. A concept of critical oxide filmthickness and a critical oxidation protection time is put forward, and, based on it, the re-lation of the critical time with temperature is analyzed. The re8ults show that the relationof the critical oxidation protection time with temperature found by the experiments is fullyidentical with that calcu1ated based on the critical thickness- The physical significance andthe effect factors of the critical oxide film thickness are discussed.

Recent progress in self-repairing coatings for corrosion protection on magnesium alloys and perspective of porous solids as novel carrier and barrier

Featuring low density and high specific strength, magnesium(Mg) alloys have attracted wide interests in the fields of portable devices and automotive industry. However, the active chemical and electrochemical properties make them susceptible to corrosion in humid, seawater, soil,and chemical medium. Various strategies have revealed certain merits of protecting Mg alloys. Therein, engineering self-repairing coatings is considered as an effective strategy, because they can enable the timely repair for damaged areas, which brings about long-term protection for Mg alloys. In this review, self-repairing coatings on Mg alloys are summarized from two aspects, namely shape restoring coatings and function restoring coatings. Shape restoring coatings benefit for swelling, shrinking, or reassociating reversible chemical bonds to return to the original state and morphology when coatings broken;function self-repairing coatings depend on the release of inhibitors to generate new passive layers on the damaged areas. With the advancement of coating research and to fulfill the demanding requirements of applications, it is an inevitable trend to develop coatings that can integrate multiple functions(such as stimulus response, self-repairing, corrosion warning,and so on). As a novel carrier and barrier, porous solids, especially covalent organic frameworks(COFs), have been respected as the future development of self-repairing coatings on Mg alloys, due to their unique, diverse structures and adjustable functions.

Corrosion Protection of Carbon Steel by Poly (aniline-co-o-toluidine) and Poly (pyrrole-co-o-toluidine) Copolymer Coatings

The soluble copolymers, poly (aniline-co-o-toluidine) and poly (pyrrole-co-o-toluidine) were synthesized by chemical oxidative copolymerization using ammonium persulphate as an oxidant in hydrochloride aqueous medium and characterized by FTIR spectroscopy. The polymers were dissolved in N-methyl-2-pyrrolidone and casted by solution evaporation on to the metallic substrate. The corrosion performance of the poly (aniline-co-o-toluidine) and poly (pyrrole-co-o-toluidine) coatings on carbon steel was studied by conducting immersion tests and electrochemical tests which include free corrosion potential measurements and potentiodynamic polarization measurements. The tests were conducted in 0.1 M HCl and 5% NaCl solution. The performance of coating in open atmosphere was also evaluated by conducting atmospheric exposure test. The surface morphology of the copolymer coatings were studied by scanning electron microscopy (SEM). The anticorrosive properties of copolymer coatings were also compared with polyaniline and poly (o-toluidine) coatings. In general the performance of poly (aniline-co-o toluidine) copolymer was found better than poly (pyrrole-co-o-toluidine) and homopolymer.

Polymer Coatings for Protection of Wood and Wood-Based Materials

Three major types of protective coating of wood and wood-based materials have been considered. These three types include the coatings based on carboxyl-containing water-soluble polymers which are easily cross-linked by inorganic salts or OH-containing compounds, pH-sensitive coatings and polymer multi-layer structures. First of three mentioned approaches allows affecting permeability and enhancing the prevention the loss of water from the surface of wood to its surrounding. The advantage of the second approach is its ability to vary and purposely adjust the polymer composition and the number and distribution of -COOH groups in the chain which make the originally water-soluble polymers completely insoluble. The strong feature of the third approach which includes broad use of hydrogen-bonded films produced by layer-by-layer self-assembly is the possibility of manipulation of coatings stability after construction.

Effectiveness of Bark Extracts and CeO2 Nano Particles as Coating Additives for the Protection of Heat-Treated Jack Pine

High temperature heat-treatment of wood, which is value-added green product, is one of the altematives to chemical treatment. It has better dimensional stability, thermal insulating properties and biological resistance compared to kiln dried wood. It also has dark brown color which is very important for decorative purposes. Unfortunately, this color changes during weathering. Developing a transparent and non-toxic coating for the protection of heat-treated wood against discoloration without changing its natural appearance is the main objective of this study. For this purpose, waterborne acrylic polyurethane base was chosen because of its durability against weathering and non-toxic nature. Natural antioxidants which are extracted from barks and CeO2 nano particles （alone or together with lignin stabilizer） were used as additives to develop different coatings. The protective characteristics of these coatings were compared with highly pigmented and toxic industrial coating under accelerated weathering conditions. The results showed that acrylic polyurethane coatings protected wood better compared to commercially available coating tested in this study. The chemical modifications during accelerated weathering of coated and heat-treated wood surfaces were monitored by X-ray photoelectron spectroscopy analysis. The morphological changes took place during weathering were studied by fluorescence microscope analysis.

Effect of SiC whiskers on the oxidation protective properties of SiC coatings for carbon/carbon composites

In order to effectively employ the unique high temperature mechanical properties of carbon/carbon composite substrates, SiC coatings reinforced by SiC whiskers were prepared by pack cementation method. The effect of SiC whiskers on the oxidation resistance properties of the single-layer coating and double-layer coating was investigated. SiC whiskers in the single-layer SiC coating have little effect on the anti-oxidation property but obviously improve the thermal shock property. The double-layer coating with inner-layer reinforced coating exhibits more perfect anti-oxidation ability than the double-layer coating with SiC inner-layer coating.

Preparation and Characterization of Low-melting Glasses Used as Binder for Protective Coating of Steel Slab

The low-melting phosphate glass was prepared for production of glass binders for protective coating of steel slab. Effects of different O/P ratios on glass structures and properties were analyzed. Differential thermal analysis （DTA） and infrared spectroscopy （IR） techniques were applied for low-melting glass binder. It was found that the glass transition temperature（T） was about 300 ℃ and softening temperature（T1） was about 480 ℃. The choice of O/P ratio was very important to the glass transition and softening temperatures. When more P=O bonds existed in the glass networks, P-O-P bond angle was deformed with decreasing of the ratio of O/E The coatings could adhere to the substrates instantaneously at 800 ℃ when the content of binder exceeded 3wt%. The optimal content of glass binder was 5wt%.

Experimental Study on Wax Protective Coating for Wet Deep Silicon Etching Processes

In order to protect the finished structures on the front side during deep silicon wet etching processes, the wax coating for double-sided etching process on the wafer is studied to separate the aforementioned structures from the strong aqueous bases. By way of heating and vacuumization, the air bubbles are expelled from the coating to extend the protection duration. The air pressure in the sealed chamber is 0.026 7 Pa, and the temperature of the heated wafer is 300℃. Two kinds of the wax are used, and the corresponding photos of the etched wafer and the protection times are given. In 75 ℃ 10 % KOH solution, the protection duration is more than 8 h.

Microstructure of nanometer Al_2O_3 dispersion strengthened Ni-based high-temperature protective coatings by laser cladding

The nanometer Al2O3 dispersion strengthened NiCoCrAlY high-temperature protective coatings by crosscurrent CO2 laser on Ni-based superalloy GH4033 were produced. Microscopic morphologies, phase constitutions of cladding coatings and distribution of nano-Al2O3 particles were examined using SEM and XRD. The results show that the interface grains, after adding proper nano-Al2O3, grow from epitaxial to non-epitaxial shape gradually, and the columnar dendrites become thinner and denser with cellular shape. Cracks in the substrate close to the interface are eliminated. Moreover, dispersive nano-Al2O3 particles mainly distribute around cellular substructure and on grain-boundaries, which prevents the diffusion of alloying elements and restrains the formation of new phase. There is a critical value of nano-Al2O3 addition, and the most suitable content of nano-Al2O3 is 1% (mass fraction) in this experimental conditions. The "nanometer effect" of nano-Al2O3 particles plays an important role in the improvement of coating microstructure.

Oxidation behavior of oxidation protective coatings for C/C-SiC composites at 1500 ℃

Porous carbon/carbon preforms were infiltrated with melted silicon to form C/C-SiC composites. Three-layer Si-Mo coating prepared by slurry painting and SiC/Si-Mo multilayer coating prepared by chemical vapor deposition(CVD) alternated with slurry painting were applied on C/C-SiC composites, respectively. The oxidation of three samples at 1 500 ℃ was compared. The results show that the C/C-SiC substrate is distorted quickly. Three-layer Si-Mo coating is out of service soon due to the formation of many bubbles on surface. The mass loss of coated sample is 0.76% after 1 h oxidation. The sample with SiC/Si-Mo multilayer coating gains mass even after 105 h oxidation. SiC/Si-Mo multilayer coating can provide longtime protection for C/C-SiC composites and has excellent thermal shock resistance. This is attributed to the combination of dense SiC layer and porous Si-Mo layer. Dense SiC layer plays the dual role of physical and chemical barrier, and resists the oxidation of porous Si-Mo layer. Porous Si-Mo layer improves the thermal shock resistance of the coating.

PLASMA POLYMERIZED ORGANOSILANES AS A PROTECTIVE COATING ON METAL

Polymer-metal oxane bonds (M-O-Si) can be created in the form of tight networks by silane plasma polymerization directly on the metal (e.g. copper) substrates. In this paper the structure and properties of the plasma-deposited organosilane polymers, the corrosion performance of such coating system on copper substrates were investigated.