Nonlinear convection in a non-Darcy porous medium

In this paper, the natural convection in a non-Darcy porous medium is studied using a temperature-concentration-dependent density relation. The effect of the two parameters responsible for the nonlinear convection is analyzed for different values of the inertial parameter, dispersion parameters, Rayleigh number, Lewis number, Soret number, and Dufour number. In the aiding buoyancy, the tangential velocity increases steeply with an increase in the nonlinear temperature parameter and the nonlinear concentration parameter when the inertial effect is zero. However, when the inertial effect is non-zero, the effect of the nonlinear temperature parameter and the nonlinear concentration parameter on the tangential velocity is marginal. The concentration distribution varies appreciably and spreads in different ranges for different values of the double dispersion parameters, the inertial effect parameter, and also for the parameters which control the nonlinear temperature and the nonlinear concentration. Heat and mass transfer varies extensively with an increase in the nonlinear temperature parameter and the nonlinear concentration parameter depending on Dacry and non-Darcy porous media. The variation in heat and mass transfer when all the effects, i.e., the inertial effect, double dispersion ef- fects, and Soret and Dufour effects, are simultaneously zero and non-zero. The combined effects of the nonlinear temperature parameter, the nonlinear concentration parameter and buoyancy are analyzed. The effect of the nonlinear temperature parameter and the nonlinear concentration parameter and also the cross diffusion effects on heat and mass transfer are observed to be more in Darcy porous media compared with those in non- Darcy porous media. In the opposing buoyancy, the effect of the temperature parameter is to increase the heat and mass transfer rate, whereas that of the concentration parameter is to decrease.

Numerical investigation of Dufour and Soret effects on unsteadyMHD natural convection flow past vertical plate embedded innon-Darcy porous medium

The Dufour and Soret effects on the unsteady twodimensional magnetonyaro dynamics （MHD） doublediffusive free convective flow of an electrically conducting fluid past a vertical plate embedded in a nonDarcy porous medium are investigated numeri cally. The governing nonlinear dimensionless equations are solved by an implicit finite difference scheme of the CrankNicolson type with a tridiagonal matrix manipulation. The effects of various parameters entering into the problem on the unsteady dimension less velocity, temperature, and concentration profiles are studied in detail. Furthermore, the time variation of the skin friction coefficient, the Nusselt number, and the Sherwood number is presented and analyzed. The results show that the unsteady velocity, tem perature, and concentration profiles are substantially influenced by the Dufour and Soret effects. When the Dufour number increases or the Soret number decreases, both the skin friction and the Sherwood number decrease, while the Nusselt number increases. It is found that, when the magnetic parameter increases, the velocity and the temperature decrease in the boundary layer.

A Formulation of the Porous Medium Equation with Time-Dependent Porosity: A Priori Estimates and Regularity Results

We consider a generalized form of the porous medium equation where the porosity ϕis a function of time t: ϕ=ϕ(x,t): ∂(ϕS)∂t−∇⋅(k(S)∇S)=Q(S).In many works, the porosity ϕis either assumed to be independent of (or to depend very little of) the time variable t. In this work, we want to study the case where it does depend on t(and xas well). For this purpose, we make a change of unknown function V=ϕSin order to obtain a saturation-like (advection-diffusion) equation. A priori estimates and regularity results are established for the new equation based in part on what is known from the saturation equation, when ϕis independent of the time t. These results are then extended to the full saturation equation with time-dependent porosity ϕ=ϕ(x,t). In this analysis, we make explicitly the dependence of the various constants in the estimates on the porosity ϕby the introduced transport vector w, through the change of unknown function. Also we do not assume zero-flux boundary, but we carry the analysis for the case Q≡0.

Heat-Generating Effects Involving Multiple Nanofluids in a Hybrid Convective Boundary Layer Flow on the Sloping Plate in a Porous Medium

The hybrid convective boundary layer circulation involving multiple nanofluids via a medium with pores is approaching a sloping plate. An investigation regarding the heat-generating effects upon the examined nanofluid flows has been carried out through computational analysis. A mathematical framework employing governing differential equations that are partial has been implemented to produce an ensemble of ordinary differential equations, which happen to be nonlinear that incorporate nanofluid flows by utilizing acceptable transformations. Through the combination of the Nachtsheim-Swigert shooting method and the Runge-Kutta method, the group of resulting non-dimensionalized equations is solved computationally. In a few special, confined cases, the corresponding numeric output is thereafter satisfactorily matched with the existing available research. The consequences of heat generation regarding local skin friction coefficient and rate of heat in conjunction with mass transfer have been investigated, evaluated, and reported on the basis of multiple nanofluid flows.

Flow and Heat Transfer of a Dusty Williamson MHD Nanofluid Flow over a Permeable Cylinder in a Porous Medium

This study investigates the flow and heat transfer of dusty Williamson (MHD) Nanofluid flow over a stretching permeable cylinder in a porous medium. Dusty Williamson Nanofluid was considered due to its thermal properties and potential benefits of increasing the heat transfer rate. Firstly, partial differential equations are transformed into coupled non-linear ordinary differential equations through a similarity variables transformation. The resulting set of dimensionless equations is solved analytically by using the Homogony Perturbation Method (HPM). The effects of the emerging parameters on the velocity and temperature profiles as well as skin-friction coefficient and Nusselt number are publicized through tables and graphs with appropriate discussions. The present result has been compared with published papers and found to be in agreement. To the best of author’s knowledge, there has been sparse research work in the literature that considers the effect of dust with Williamson Nanofluid and also solving the problem analytically. Therefore to the best of author’s knowledge, this is the first time analytical solution has been established for the problem. The results revealed that the fluid velocity of both the fluid and dust phases decreases as the Williamson parameter increases. Motivated by the above limitations and the gaps in past works, therefore, it is hoped that the present work will assist in providing accurate solutions to many practical problems in science, industry and engineering.

Effect of thermal radiation on mixed convection of a nanofluid from an inclined wavy surface embedded in a non-Darcy porous medium with wall heat flux

This article focuses on the effect of radiation on mixed convection in a nanofluid along an inclined wavy surface embedded in a non-Darcy porous medium.A coordinate transformation is employed to transform the complex wavy surface to a smooth surface.The governing equations are transformed into a set of partial differential equations using the nonsimilarity transformation and then a local similarity and non-similarity method is applied to obtain coupled ordinary differential equations.These resulting equations are linearized using the successive linearization method and then solved by the Chebyshev spectral method.The effects of radiation,non-Darcy parameter,Brownian motion parameter,thermophoresis parameter,the amplitude of the wavy surface,angle of inclination of the wavy surface on the non-dimensional heat and nanoparticle mass transfer rates are studied and presented graphically.

A fractal approach to low velocity non-Darcy flow in a low permeability porous medium

In this paper, the mechanism for fluid flow at low velocity in a porous medium is analyzed based on plastic flow of oil in a reservoir and the fractal approach. The analytical expressions for flow rate and velocity of non-Newtonian fluid flow in the low permeability porous medium are derived, and the threshold pressure gradient （TPG） is also obtained. It is notable that the TPG （J） and permeability （K） of the porous medium analytically exhibit the scaling behavior J ~ K-D＇r/（l＋Or）, where DT is the fractal dimension for tortuous capillaries. The fractal characteristics of tortuosity for capillaries should be considered in analysis of non-Darcy flow in a low permeability porous medium. The model predictions of TPG show good agreement with those obtained by the available expression and experimental data. The proposed model may be conducible to a better understanding of the mechanism for nonlinear flow in the low permeability porous medium.

Influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel

The influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel is investigated.The DarcyBrinkman model is used to characterize the fluid flow dynamics in porous materials.The analytical solutions are obtained for the unidirectional and completely developed flow.Based on a normal mode analysis,the generalized eigenvalue problem under a perturbed state is solved.The eigenvalue problem is then solved by the spectral method.Finally,the critical Rayleigh number with the corresponding wavenumber is evaluated at the assigned values of the other flow-governing parameters.The results show that increasing the Darcy number,the Lewis number,the Dufour parameter,or the Soret parameter increases the stability of the system,whereas increasing the inclination angle of the channel destabilizes the flow.Besides,the flow is the most unstable when the channel is vertically oriented.

Flow and heat transfer of a nanofluid through a porous medium due to stretching/shrinking sheet with suction,magnetic field and thermal radiation

This study investigates the suction and magnetic field effects on the two-dimensional nanofluid flow through a stretching/shrinking sheet at the stagnation point in the porous medium with thermal radiation.The governing partial differential equations(PDEs)are converted into ordinary differential equations(ODEs)using the similarity transformation.The resulting ODEs are then solved numerically by using the bvp4c solver in MATLAB software.It was found that dual solutions exist for the shrinking parameter values up to a certain range.The numerical results obtained are compared,and the comparison showed a good agreement with the existing results in the literature.The governing parameters’effect on the velocity,temperature and nanoparticle fraction fields as well as the skin friction coefficient,the local Nusselt number and the Sherwood number are represented graphically and analyzed.The variation of the velocity,temperature and concentration increase with the increase in the suction and magnetic field parameters.It seems that the thermal radiation effect has increased the local Sherwood number while the local Nusselt number is reduced with it.

Analysis of a Stagnation Point Flow with Hybrid Nanoparticles over a Porous Medium

The unsteady stagnation-point flow of a hybrid nanofluid over a stretching/shrinking sheet embedded in a porous medium with mass transpiration and chemical reactions is considered.The momentum and mass transfer problems are combined to form a system of partial differential equations,which is converted into a set of ordinary differential equations via similarity transformation.These ordinary differential equations are solved analytically to obtain the solution for velocity and concentration profiles in exponential and hypergeometric forms,respectively.The concentration profile is obtained for four different cases namely constant wall concentration,uniform mass flux,general power law wall con-centration and general power law mass flux.The effect of different physical parameters such as Darcy number Da^(1-1),mass transpiration parameter V_(C),stretching/shrinking parameter (d),chemical reaction parameter(β)and Schmidt number (Sc)on velocity and concentration profile is examined.Results show that,the axial velocity will decreases as the shrinking sheet parameter increases,regardless of whether the suction or injection case is examined.The concentration decreases with an increase in the shrinking sheet parameter and the chemical reaction rate parameter.

Efect of double dispersion on non-Darcy mixed convective flow over vertical surface embedded in porous medium

A numerical study of a non-Darcy mixed convective heat and mass transfer flow over a vertical surface embedded in a dispersion, melting, and thermal radiation is porous medium under the effects of double investigated. The set of governing boundary layer equations and the boundary conditions is transformed into a set of coupled nonlinear ordinary differential equations with the relevant boundary conditions. The transformed equations are solved numerically by using the Chebyshev pseudospectral method. Comparisons of the present results with the existing results in the literature are made, and good agreement is found. Numerical results for the velocity, temperature, concentration profiles, and local Nusselt and Sherwood numbers are discussed for various values of physical parameters.

Slip Condition Effects on Unsteady MHD Fluid Flow with Radiative Heatflux over a Porous Medium

The objective of this paper is to study unsteady magneto hydrodynamic (MHD) free flow of viscoelastic fluid (Walter’s B) past an infinite vertical plate through porous medium. The temperature is assumed to be oscillating with time. The solution obtained shows different profiles of effects of slip conditions on primary and secondary velocity. Also, the effects of various parameters on temperature, concentration, primary and secondary velocity profiles were presented graphically. The result indicated the secondary velocity is enhanced with increase in slip parameter. Primary velocity demonstrated opposite trend.

Formation Characteristics of CO_(2) Hydrates in the Presence of Porous Media and NaCl

Hydrate-based CO_(2) sequestration is an effective method for reducing the greenhouse effect,and the presence of porous media and NaCl can impact the formation characteristics of hydrates.This study uses the constant volume temperature search method to investigate the effects of quartz sand particle size(0.006‒0.03 mm),water saturation(30%–90%),and NaCl concentration(1%‒9%)on the phase equilibrium and kinetics of CO_(2) hydrates within a temperature range of 273‒285 K and pressure range of 1.0‒3.5 MPa.The results indicate that a decrease in quartz sand particle size or an increase in NaCl concentration shifts the hydrate phase equilibrium curve towards lower temperatures and higher pressures,making hydrate generation conditions more demanding.In different particle size systems,there are no significant changes in the rate of CO_(2) hydrate formation or conversion rate.The highest hydrate conversion rate of 71.1%is observed in a 0.015 mm particle size system.With increasing water saturation,both the generation rate and conversion rate of CO_(2) hydrates show a trend of first increasing and then decreasing.Meanwhile,low concentrations of NaCl(1%–3%)are found to enhance the formation and conversion rates of CO_(2) hydrates.However,as NaCl concentration increases,the rate of CO_(2) hydrate formation and conversion rate decrease.

Hydromagnetic thin film flow of Casson fluid in non-Darcy porous medium with Joule dissipation and Navier＇s partial slip

In this paper, the effects of viscous and Ohmic heating and heat genera- tion/absorption on magnetohydrodynamic flow of an electrically conducting Casson thin film fluid over an unsteady horizontal stretching sheet in a non-Darcy porous medium are investigated. The fluid is assumed to slip along the boundary of the sheet. Similar- ity transformation is used to translate the governing partial differential equations into ordinary differential equations. A shooting technique in conjunction with the 4th order Runge-Kutta method is used to solve the transformed equations. Computations are car- ried out for velocity and temperature of the fluid thin film along with local skin friction coefficient and local Nusselt number for a range of values of pertinent flow parameters. It is observed that the Casson parameter has the ability to enhance free surface velocity and film thickness, whereas the Forchheimer parameter, which, is responsible for the inertial drag has an adverse effect on the fluid velocity inside the film. The velocity slip along the boundary tends to decrease the fluid velocity. This investigation has various applications in engineering and in practical problems such as very large scale integration （VLSI） of electronic chips and film coating.

Peristaltic Blood Flow with Gold Nanoparticles on a Carreau Nanofluid through a Non-Darcian Porous Medium

The article investigates the influences of a variable thermal conductivity and wall slip on a peristaltic motion of Carreau nanofluid. The model is concerned with heat and mass transfer inside asymmetric channel. The blood is considered as the base Carreau non-Newtonian fluid and gold (Au) as nanoparticles stressed upon. The Fronchiener effect of the non-Darcian medium is taken in consideration. The system is stressed upon a strong magnetic field and the Hall currents are completed. The problem is modulated mathematically by a system of non-linear partial differential equations which describe the fluid velocity, temperature and concentration. The system is reformulated under the approximation of long wavelength and low Reynolds number. It is solved on using multi-step differential transform method (Ms-DTM) as a semi-analytical method. A gold nanoparticle has increased the temperature distribution which is of great importance in destroying the cancer cells.

Gas Condensate Two Phase Flow Performance in Porous Media Considering Capillary Number and Non-Darcy Effects

Retrograde condensation frequently occurs during the development of gas condensate reservoirs. The loss of productivity is often observed due to the reduced relative permeability to gas as condensate accumulates near the well bore region. How to describe the condensate blockage effect exactly has been a continuous research topic. However, up to now, the present methods usually over-estimate or underestimate the productivity reduction due to an incorrect understanding of the mechanism of flow in porous medium, which inevitably results in an inaccurate prediction of production performance. It has been found in recent numerous theoretical and experimental studies that capillary number and non-Darcy flow have significant influence on relative permeability in regions near the well bore. The two effects impose opposite impacts on production performance, thus leading to gas condensate flow showing characteristics different from general understanding. It is significant for prediction of performance in gas condensate wells to understand the two effects exactly. The aim of the paper is to describe and analyze the flow dynamics in porous media accurately during the production of gas condensate reservoirs. Based on the description of three-zone flow mechanism, capillary number and non-Darcy effect are incorporated in the analysis of relative permeability, making it possible to describe the effect of condensate blockage. The effect of capillary number and inertial flow on gas and condensate relative permeability is analyzed in detail. Novel Inflow Performance Relation (IPR) models considering high velocity effects are formulated and the contrast analysis of different IPR models is conducted. The result shows that the proposed method can help predict the production performance and productivity more accurately than conventional methods.

Simulation of porous medium engine using a detailed chemical kinetics model

The Senkin code of package is used to simulate the the Chemkin chemical kinetics combustion process of a porous medium（PM） engine fueled by n-heptane. The code is modified to incorporate the Woschni heat transfer correlation and heat transfer model within a porous medium. A detailed chemistry mechanism of NOx formation is coupled with the detailed chemical kinetics mechanism of n-heptane. The code is applied to a zero- dimensional single-zone model of engine combustion. Influences of operating parameters on the performance of the PM engine are discussed. With the increase in the intake temperature and compression ratio, or with the decrease of the excess air ratio, the ignition timing of the PM engine obviously advances. It is found that the porous medium acting as a heat recuperator can considerably preheat the fuel-air mixture, which promotes the ignition and combustion in the cylinder. And the initial PM temperature is a critical factor controlling the compression ignition of the mixture.

Analytical solutions for dynamic pressures of coupling fluid-solid-porous medium due to P wave incidence

Wave reflection and refraction in layered media is a topic closely related to seismology,acoustics,geophysics and earthquake engineering.Analytical solutions for wave reflection and refraction coefficients in multi-layered media subjected to P wave incidence from the elastic half-space are derived in terms of displacement potentials.The system is composed of ideal fluid,porous medium,and underlying elastic solid.By numerical examples,the effects of porous medium and the incident wave angle on the dynamic pressures of ideal fluid are analyzed.The results show that the existence of the porous medium,especially in the partially saturated case,may significantly affect the dynamic pressures of the overlying fluid.

Laminar MHD natural convection of nanofluid containing gyrotactic microorganisms over vertical wavy surface saturated non-Darcian porous media

Magnetohydrodynamic （MHD） bioconvection of an incompressible electrically conducting nanofluid near a vertical wavy surface saturated porous medium containing both nanoparticle and gyrotactic microorganisms is investigated. The nanofluid is represented by a model that includes both Brownian motion and thermophoresis effects. A suitable set of non-dimensional variables are used to transform the governing boundary layer equations into a dimensionless form. The resulting nonlinear system is mapped to the vertical flat plate domain, and a non-similar solution is used to the obtained equations. The obtained non-similar system is then solved numerically using the fourth-order Runge-Kutta method. The influence of various physical parameters on the local Nusselt number, the local Sherwood number, the local density number of the motile microorganisms, the dimensionless velocity, the dimensionless temperature, and the rescaled density of motile microorganisms is studied. It is found that the local Nusselt number, the local Sherwood number, and the local density number of the motile microorganisms decrease by increasing either the Grashof number or the magnetic field parameter.

Slip flow of Maxwell viscoelasticity-based micropolar nanoparticles with porous medium: a numerical study

This article presents the mass and heat transport aspects in viscoelastic nanofluid flows under the presence of velocity slip conditions. To explore the nonNewtonian behavior, a Maxwell viscoelasticity-based micropolar is considered. Moreover, a porous medium saturates the stretching sheet. A set of similarity variables is introduced to derive the dimensionless ordinary differential equations of velocity, concentration, and temperature profiles. The numerical solution is computed by using the MATLAB bvp4c package. The salient flow features of velocity, concentration, and temperature profiles are described and discussed through various graphs. It is observed that with an increase in the slip parameter, the micro-rotation velocity also increases. The temperature of nanoparticles gets maximum values by varying the viscoelastic parameter and the porosity parameter while an opposite trend is noted for the micro-rotation parameter. The local Nusselt number and the local Sherwood number increase by increasing the viscoelastic parameter, the porosity parameter, and the slip velocity parameter. The graphical computation is performed for a specified range of parameters, such as 0 ≤ M ≤ 2.5, 0 ≤σm ≤ 2.5, 0 ≤ K1 ≤ 1.5, 0.5 ≤ Pr ≤ 3.0, 0 ≤σ≤ 1.5, 0.5 ≤ Sc ≤ 2.0, 0.2 ≤ Nb ≤ 0.8, and 0.2 ≤ Nt ≤ 0.8.