Oyster(Crassostrea gigas),the main ingredient of oyster sauce,has a strong umami taste.In this study,three potential umami peptides,FLNQDEEAR(FR-9),FNKEE(FE-5),and EEFLK(EK-5),were identified and screened from the alc...Oyster(Crassostrea gigas),the main ingredient of oyster sauce,has a strong umami taste.In this study,three potential umami peptides,FLNQDEEAR(FR-9),FNKEE(FE-5),and EEFLK(EK-5),were identified and screened from the alcoholic extracts of the oyster using nano-HPLC-MS/MS analysis,i Umami-Scoring Card Method(i Umami-SCM)database and molecular docking(MD).Sensory evaluation and electronic tongue analysis were further used to confirm their tastes.The threshold of the three peptides ranged from 0.38 to 0.55 mg/m L.MD with umami receptors T1R1/T1R3 indicated that the electrostatic interaction and hydrogen bond interaction were the main forces involved.Besides,the Phe592 and Gln853 of T1R3 were the primary docking site for MD and played an important role in umami intensity.Peptides with two Glu residues at the terminus had stronger umami,especially at the C-terminus.These results contribute to the understanding of umami peptides in oysters and the interaction mechanism between umami peptides and umami receptors.展开更多
The purpose of this study is to investigate the physicochemical properties of some local varieties of onion (Allium cepa L.) and compare them with an imported variety, all collected in May 2021. Proteins, reducing sug...The purpose of this study is to investigate the physicochemical properties of some local varieties of onion (Allium cepa L.) and compare them with an imported variety, all collected in May 2021. Proteins, reducing sugars, lipids, and polyphenol content were estimated according to the AFNOR standardized methods. The determination of calcium, magnesium, iron, sodium, potassium and phosphorus was performed by atomic absorption spectrophotometer coupled with a CCD detector. The results highlighted an average acidity of 0.377% ± 0.002% lower than the value of the imported variety which is 0.520% ± 0.001%. Local varieties have a pH ranging from 6.35 ± 0.003 to 6.42 ± 0.004, while the variety has a pH of 6.36 ± 0.003. The ash and dry matter contents vary respectively from 4.788% ± 0.004% to 8.253% ± 0.003% and 7.945% ± 0.021% to 11.945% ± 0.007% for the local varieties. Moreover, the imported one has ash and dry matter contents of 5.175% ± 0.007% and 10.035% ± 0.021% respectively. The results show that the protein, reducing sugar and lipid contents in the local onion varieties vary respectively from 2.815 ± 0.000 to 15.634 ± 0.001 g·100 g<sup>-1</sup>;4.691 ± 0.001 to 12.596 ± 0.002 g·100 g<sup>-1</sup> and 0.006 ± 0.001 to 0.050 ± 0.057 g·100 g<sup>-1</sup>. Furthermore, the imported variety has a protein, reducing sugar and lipid content of 5.649 ± 0.002;8.565 ± 0.002 g·100 g<sup>-1</sup> and 0.011 ± 0.010 g·100 g<sup>-1</sup> respectively. The maximum levels of total polyphenols are obtained in the imported variety, Bellani and Gandiol, respectively 9.973 ± 0.001, 4.535 ± 0.002, and 3.425 ± 0.006 mg EAG/g of dry matter. The local varieties have a significant calorific intake of between 35.451 ± 0.001 and 112.980 ± 0.003 kcal·100 g<sup>-1</sup> compared to the imported one with an energy value of 56.953 ± 0.001 kcal·100 g<sup>-1</sup> of dry matter. The bulbs of different onion varieties studied have a fairly high content of mineral elements. The potassium content of local varieties is between 502.16 ± 0.06 mg·100 g<sup>-1</sup> and 582.77 ± 0.04 mg·100 g<sup>-1</sup> while the imported variety has a content of 536.62 ± 1.30 mg·100 g<sup>-1</sup>. They note that the local varieties have a better calcium content (249.75 ± 0.07 to 434.20 ± 0.57 mg·100 g<sup>-1</sup>) and magnesium (142.15 ± 0.07 to 162.60 ± 0.42 mg·100 g<sup>-1</sup>) than the imported variety (229.58 ± 0.04 mg·100 g<sup>-1</sup>) except for the varieties White Grano (228.29 ± 0.01 mg·100 g<sup>-1</sup>) and Rouge Amposta (117.00 ± 0.42 mg·100 g<sup>-1</sup>) respectively. These results reveal that Gandiol, Dayo and Orient F1 are nutritionally found better due to their higher antioxidant property, proteins, carbohydrates, and reducing sugar and should be included in diets to supplement our daily allowance needed by the body.展开更多
The study conducted at Ndiebene Gandiol 1 school in Senegal has unveiled serious environmental and public health challenges. The wastewater analysis revealed high levels of Biochemical Oxygen Demand (BOD5), Chemical O...The study conducted at Ndiebene Gandiol 1 school in Senegal has unveiled serious environmental and public health challenges. The wastewater analysis revealed high levels of Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and fecal coliforms, signaling potential risks to the well-being of students and staff. This situation mirrors a wider issue in rural educational settings, where inadequate sanitation persists. Intensive wastewater treatment options are known for their effectiveness against high pollutant loads but are resource-intensive in both energy and cost. Conversely, extensive treatment systems, while requiring more land, provide a sustainable alternative by harnessing natural processes for pollutant removal. The research suggests a hybrid treatment approach could serve the school’s needs, balancing the robust capabilities of intensive methods with the ecological benefits of extensive systems. Such a solution would need to be tailored to the specific environmental, financial, and logistical context of the school, based on comprehensive feasibility studies and stakeholder engagement. This study’s findings underscore the urgency of addressing sanitation in schools, as it is intrinsically linked to the health and academic success of students. Quick, effective, and long-term strategies are vital to secure a healthier and more prosperous future for the youth. With proper implementation, the school can transform its sanitation facilities, setting a precedent for rural educational institutions in Senegal and similar contexts globally.展开更多
In this paper,tannic acid(TA)and Fe~(3+)were added to form a layer of metal-polyphenol network structure on the surface of the nanoparticles which were fabricated by zein and carbon quantum dots(CQDs)encapsulating phl...In this paper,tannic acid(TA)and Fe~(3+)were added to form a layer of metal-polyphenol network structure on the surface of the nanoparticles which were fabricated by zein and carbon quantum dots(CQDs)encapsulating phlorotannins(PTN).pH-Responsive nanoparticles were prepared successfully(zein-PTN-CQDs-Fe-~Ⅲ).Further,the formation of composite nanoparticles was confirmed by a series of characterization methods.The zeta-potential and Fourier transform infrared spectroscopy data proved that electrostatic interaction and hydrogen bonding are dominant forces to form nanoparticles.The encapsulation efficiency(EE)revealed that metal-polyphenol network structure could improve the EE of PTN.Thermogravimetric analysis and differential scanning calorimetry experiment indicated the thermal stability of zein-PTN-CQDs-Fe~Ⅲnanoparticles increased because of metal-polyphenol network structure.The pH-responsive nanoparticles greatly increased the release rate of active substances and achieved targeted release.展开更多
Metal-ion batteries(MIBs),including alkali metal-ion(Li^(+),Na^(+),and K^(3)),multi-valent metal-ion(Zn^(2+),Mg^(2+),and Al^(3+)),metal-air,and metal-sulfur batteries,play an indispensable role in electrochemical ener...Metal-ion batteries(MIBs),including alkali metal-ion(Li^(+),Na^(+),and K^(3)),multi-valent metal-ion(Zn^(2+),Mg^(2+),and Al^(3+)),metal-air,and metal-sulfur batteries,play an indispensable role in electrochemical energy storage.However,the performance of MIBs is significantly influenced by numerous variables,resulting in multi-dimensional and long-term challenges in the field of battery research and performance enhancement.Machine learning(ML),with its capability to solve intricate tasks and perform robust data processing,is now catalyzing a revolutionary transformation in the development of MIB materials and devices.In this review,we summarize the utilization of ML algorithms that have expedited research on MIBs over the past five years.We present an extensive overview of existing algorithms,elucidating their details,advantages,and limitations in various applications,which encompass electrode screening,material property prediction,electrolyte formulation design,electrode material characterization,manufacturing parameter optimization,and real-time battery status monitoring.Finally,we propose potential solutions and future directions for the application of ML in advancing MIB development.展开更多
Lithium-ion batteries are widely recognized as a crucial enabling technology for the advancement of electric vehicles and energy storage systems in the grid.The design of battery state estimation and control algorithm...Lithium-ion batteries are widely recognized as a crucial enabling technology for the advancement of electric vehicles and energy storage systems in the grid.The design of battery state estimation and control algorithms in battery management systems is usually based on battery models,which interpret crucial battery dynamics through the utilization of mathematical functions.Therefore,the investigation of battery dynamics with the purpose of battery system identification has garnered considerable attention in the realm of battery research.Characterization methods in terms of linear and nonlinear response of lithium-ion batteries have emerged as a prominent area of study in this field.This review has undertaken an analysis and discussion of characterization methods,with a particular focus on the motivation of battery system identification.Specifically,this work encompasses the incorporation of frequency domain nonlinear characterization methods and dynamics-based battery electrical models.The aim of this study is to establish a connection between the characterization and identification of battery systems for researchers and engineers specialized in the field of batteries,with the intention of promoting the advancement of efficient battery technology for real-world applications.展开更多
Shearing dislocation is a common failure type for rock–backfill interfaces because of backfill sedimentation and rock strata movement in backfill mining goaf.This paper designed a test method for rock–backfill shear...Shearing dislocation is a common failure type for rock–backfill interfaces because of backfill sedimentation and rock strata movement in backfill mining goaf.This paper designed a test method for rock–backfill shearing dislocation.Using digital image techno-logy and three-dimensional(3D)laser morphology scanning techniques,a set of 3D models with rough joint surfaces was established.Further,the mechanical behavior of rock–backfill shearing dislocation was investigated using a direct shear test.The effects of interface roughness on the shear–displacement curve and failure characteristics of rock–backfill specimens were considered.The 3D fractal dimen-sion,profile line joint roughness coefficient(JRC),profile line two-dimensional fractal dimension,and the surface curvature of the frac-tures were obtained.The correlation characterization of surface roughness was then analyzed,and the shear strength could be measured and calculated using JRC.The results showed the following:there were three failure threshold value points in rock–backfill shearing dis-location:30%–50%displacement before the peak,70%–90%displacement before the peak,and 100%displacement before the peak to post-peak,which could be a sign for rock–backfill shearing dislocation failure.The surface JRC could be used to judge the rock–backfill shearing dislocation failure,including post-peak sliding,uniform variations,and gradient change,corresponding to rock–backfill disloca-tion failure on the field site.The research reveals the damage mechanism for rock–backfill complexes based on the free joint surface,fills the gap of existing shearing theoretical systems for isomerism complexes,and provides a theoretical basis for the prevention and control of possible disasters in backfill mining.展开更多
Food allergens are mainly naturally-occurring proteins with immunoglobulin E(IgE)-binding epitopes.Understanding the structural and immunogenic characteristics of allergenic proteins is essential in assessing whether ...Food allergens are mainly naturally-occurring proteins with immunoglobulin E(IgE)-binding epitopes.Understanding the structural and immunogenic characteristics of allergenic proteins is essential in assessing whether and how food processing techniques reduce allergenicity.We here discuss the impacts of food processing technologies on the modification of physicochemical,structural,and immunogenic properties of allergenic proteins.Detection techniques for characterizing changes in these properties of food allergens are summarized.Food processing helps to reduce allergenicity by aggregating or denaturing proteins,which masks,modifies,or destroys antigenic epitopes,whereas,it cannot eliminate allergenicity completely,and sometimes even improves allergenicity by exposing new epitopes.Moreover,most food processing techniques have been tested on purified food allergens rather than food products due to potential interference of other food components.We provide guidance for further development of processing operations that can decrease the allergenicity of allergenic food proteins without negatively impacting the nutritional profile.展开更多
Three novel acidic polysaccharide fractions(OFPP-1,OFPP-2,OFPP-3)with different m olecular weights(803.7,555.1 and 414.5 k Da)were isolated from the peeled Opuntia dillenii Haw.fruits by alkali-extraction,graded alcoh...Three novel acidic polysaccharide fractions(OFPP-1,OFPP-2,OFPP-3)with different m olecular weights(803.7,555.1 and 414.5 k Da)were isolated from the peeled Opuntia dillenii Haw.fruits by alkali-extraction,graded alcohol precipitation and column chromatography.Structural analysis indicated that OFPPs were pectic polysaccharides consisting of rhamnose,arabinose and galactose residues.The backbone of OFPP-1 consisted of a repeating unit→6-α-D-Galp A-(1→2)-α-L-Rhap-(1→with T-α-D-Galp A-(1→6)-α-D-Galp A-(1→4)-α-D-Glcp-(1→,T-β-D-Xylp-(1→6)-α-D-Galp A-(1→4)-α-D-Glcp-(1→or T-α-D-Galp A-(1→3)-α-L-Araf-(1→as the side chains.The backbone of OFPP-2 consisted of a disaccharide repeating unit→2)-α-L-Rhap-(1→4)-β-D-Galp A-(1→with T-β-L-Araf-(1→as the branches substituted at the O-4 position of→2,4)-α-LRhap-(1→.Whereas the backbone of OFPP-3 was→2,4)-α-L-Rhap-(1→2)-α-L-Rhap-(1→3)-β-L-Araf-(1→or→2,4)-α-L-Rhap-(1→2)-α-L-Rhap-(1→4)-β-D-Galp A-(1→,which was branched at the O-4 position of→2,4)-α-L-Rhap-(1→.Moreover,these three polysaccharide fractions could protect Huh-7 cells against H2O2-induced oxidative stress to different extents by decreasing the MDA content and increasing the SOD,CAT,GSH-Px activities and the GSH level in the Huh-7 cells.These results suggest that OFPPs have the potential to be used as natural antioxidants.展开更多
Ex situ characterization techniques in molecular beam epitaxy(MBE)have inherent limitations,such as being prone to sample contamination and unstable surfaces during sample transfer from the MBE chamber.In recent years...Ex situ characterization techniques in molecular beam epitaxy(MBE)have inherent limitations,such as being prone to sample contamination and unstable surfaces during sample transfer from the MBE chamber.In recent years,the need for improved accuracy and reliability in measurement has driven the increasing adoption of in situ characterization techniques.These techniques,such as reflection high-energy electron diffraction,scanning tunneling microscopy,and X-ray photoelectron spectroscopy,allow direct observation of film growth processes in real time without exposing the sample to air,hence offering insights into the growth mechanisms of epitaxial films with controlled properties.By combining multiple in situ characterization techniques with MBE,researchers can better understand film growth processes,realizing novel materials with customized properties and extensive applications.This review aims to overview the benefits and achievements of in situ characterization techniques in MBE and their applications for material science research.In addition,through further analysis of these techniques regarding their challenges and potential solutions,particularly highlighting the assistance of machine learning to correlate in situ characterization with other material information,we hope to provide a guideline for future efforts in the development of novel monitoring and control schemes for MBE growth processes with improved material properties.展开更多
Herein, we report some characteristics of the clayey materials (CMs) collected from Kaliwa (C1), Kabé (C2) and Malo (C3) district in N’Djamena (Chad). Three samples were characterized applying XRF, XRD, FTIR, SE...Herein, we report some characteristics of the clayey materials (CMs) collected from Kaliwa (C1), Kabé (C2) and Malo (C3) district in N’Djamena (Chad). Three samples were characterized applying XRF, XRD, FTIR, SEM. In addition, TGA/DSC were performed to control decomposition/mass loss and show phase transitions respectively of CMs. Geochemical analysis by XRF reveals the following minerals composition: SiO<sub>2</sub> (~57% - 66%), Al<sub>2</sub>O<sub>3 </sub>(~13% - 15%), Fe<sub>2</sub>O<sub>3</sub> (~6% - 10%), TiO<sub>2</sub> (~1% - 2%) were the predominant oxides with a reduced proportion in C1, and (~7%) of fluxing agents (K<sub>2</sub>O, CaO, Na<sub>2</sub>O). Negligible and trace of MgO (~1%) and P<sub>2</sub>O<sub>5</sub> was noted. The mineralogical composition by XRD shows that, C1, C2 and C3 display close mineralogy with: Quartz (~50%), feldspar (~20%) as non-clay minerals, whereas clays minerals were mostly kaolinite (~15%), illite (~5%) and smectite (~10%). FTIR analysis exhibits almost seemingly similar absorption bands characteristic of hydroxyls elongation, OH valence vibration of Kaolinite and stretching vibration of some Metal-Oxygen bond. SEM micrographs of the samples exhibit microstructureformed by inter-aggregates particles with porous cavities. TGA/DSCconfirm the existence of quartz (570˚C to 870˚C), carbonates (600˚C - 760˚C), kaolinite (569˚C - 988˚C), illite (566˚C - 966˚C), MgO (410˚C - 720˚C) and smectite (650˚C - 900˚C). The overall characterization indicates that, these clayey soils exhibit good properties for ceramic application.展开更多
A Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. By combining well s...A Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. By combining well seismic analysis, the middle section of Shahejie-3 is divided into high-level system tract and forced lake retreat system tract, corresponding to the II oil formation and I oil formation, respectively. Using sequence stratigraphy methods, based on seismic profiles and drilling lithological cycles, the high stand system tract is divided into 5 stages of delta progradation. The first and second stages are high angle S-type progradation with large sedimentary thickness, the third stage is oblique progradation, and the fourth and fifth stages are S-oblique composite progradation;By combining seismic data, we characterized the large-scale (8 small-scale) progradation bodies of 5 periods, clarified the distribution characteristics of reservoir planes, and laid the foundation for the later exploration of oilfield potential.展开更多
This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview ...This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.展开更多
BACKGROUND Artificial intelligence(AI)has potential in the optical diagnosis of colorectal polyps.AIM To evaluate the feasibility of the real-time use of the computer-aided diagnosis system(CADx)AI for ColoRectal Poly...BACKGROUND Artificial intelligence(AI)has potential in the optical diagnosis of colorectal polyps.AIM To evaluate the feasibility of the real-time use of the computer-aided diagnosis system(CADx)AI for ColoRectal Polyps(AI4CRP)for the optical diagnosis of diminutive colorectal polyps and to compare the performance with CAD EYE^(TM)(Fujifilm,Tokyo,Japan).CADx influence on the optical diagnosis of an expert endoscopist was also investigated.METHODS AI4CRP was developed in-house and CAD EYE was proprietary software provided by Fujifilm.Both CADxsystems exploit convolutional neural networks.Colorectal polyps were characterized as benign or premalignant and histopathology was used as gold standard.AI4CRP provided an objective assessment of its characterization by presenting a calibrated confidence characterization value(range 0.0-1.0).A predefined cut-off value of 0.6 was set with values<0.6 indicating benign and values≥0.6 indicating premalignant colorectal polyps.Low confidence characterizations were defined as values 40%around the cut-off value of 0.6(<0.36 and>0.76).Self-critical AI4CRP’s diagnostic performances excluded low confidence characterizations.RESULTS AI4CRP use was feasible and performed on 30 patients with 51 colorectal polyps.Self-critical AI4CRP,excluding 14 low confidence characterizations[27.5%(14/51)],had a diagnostic accuracy of 89.2%,sensitivity of 89.7%,and specificity of 87.5%,which was higher compared to AI4CRP.CAD EYE had a 83.7%diagnostic accuracy,74.2%sensitivity,and 100.0%specificity.Diagnostic performances of the endoscopist alone(before AI)increased nonsignificantly after reviewing the CADx characterizations of both AI4CRP and CAD EYE(AI-assisted endoscopist).Diagnostic performances of the AI-assisted endoscopist were higher compared to both CADx-systems,except for specificity for which CAD EYE performed best.CONCLUSION Real-time use of AI4CRP was feasible.Objective confidence values provided by a CADx is novel and self-critical AI4CRP showed higher diagnostic performances compared to AI4CRP.展开更多
Background: To preserve its nutritional properties, fish must have good sanitary quality. The objective of this study was to investigate some pathogens contaminating smoked, dried, and braised fish marketed in Ouagado...Background: To preserve its nutritional properties, fish must have good sanitary quality. The objective of this study was to investigate some pathogens contaminating smoked, dried, and braised fish marketed in Ouagadougou. Methodology: Potential pathogens of Enterobacteriaceae and Staphylococcus were screened in eight (8) species of processed fish. The investigation of the germs was carried out following the normative methods of microbiology. The identities of the strains were determined by API 20 E (BioMerieux S.A., France) and API STAPH (BioMerieux S.A., France) kits for Enterobacteriaceae and Staphylococcus species respectively. The uidA gene profile in Escherichia coli isolates was determined by simplex PCR. The identity of Staphylococcus aureus was confirmed by amplification of specific 23S rDNA regions and nuc gene profile with PCR. Results: A total of 235 fish samples were analyzed. A diversity of Enterobacteriaceae and Staphylococcus was detected. Twenty species of Enterobacteriaceae were identified among which, the most frequent were Escherichia coli, Salmonella sp, Raoultella ornithinolytica and Serratia odorifera, respectively in 22.6%, 4.3%, 28.9%, 17.4% of the samples analyzed. However, eleven species of Staphylococcus were identified among which, Staphylococcus xylosus, Staphylococcus aureus, Staphylococcus lugdunensis, and Staphylococcus sciuri were the most frequent with respective percentages of 47.7%, 23.4%, 12.8% and 10.6% of samples. For all the samples, the species frequently isolated were: Raoultella ornithinolytica, Escherichia coli, Serratia odorifera, Staphylococcus aureus, Staphylococcus xylosus, and Staphylococcus lugdunensis. The uidA gene specific to Escherichia coli was detected in 82.85% of strains (29/35). Amplification of the specific 23S rDNA region using staur primers was observed in 98% (49/50) of the isolated Staphylococcus aureus strains and the nuc gene was detected in 86% of Staphylococcus aureus strains. Conclusion: The isolated bacteria are potential pathogens involved in foodborne illnesses and intoxications. Effective sanitary safety systems must be implemented to guarantee the sanitary quality of fish supplied to consumers.展开更多
Photocatalytic water splitting is beneficial for the effective mitigation of global energy and environmental crises.Owing to multi-exciton generation,impressive light harvesting,and excellent photochemical properties,...Photocatalytic water splitting is beneficial for the effective mitigation of global energy and environmental crises.Owing to multi-exciton generation,impressive light harvesting,and excellent photochemical properties,the quantum dot(QD)-based catalysts reveal a considerable potential in photocatalytic hydrogen(H_(2))production compared with bulk competitors.In this review,we summarize the recent advances in QDs for photocatalytic H_(2) production by enumerating different synthetic and characterization strategies for QDs.Various QDs-based photocatalysts are introduced and summarized in categories,and the role of different QDs in varied systems,as well as the mechanism and key factors that enhance the photocatalytic H_(2) generation performance,is discussed.Finally,conclusions and future perspectives in the exploration of highly efficient QDs-based photocatalysts for innovative applications are highlighted.展开更多
Energy storage is an ever-growing global concern due to increased energy needs and resource exhaustion.Sodium-ion batteries(SIBs)have called increasing attention and achieved substantial progress in recent years owing...Energy storage is an ever-growing global concern due to increased energy needs and resource exhaustion.Sodium-ion batteries(SIBs)have called increasing attention and achieved substantial progress in recent years owing to the abundance and even distribution of Na resources in the crust,and the predicted low cost of the technique.Nevertheless,SIBs still face challenges like lower energy density and inferior cycling stability compared to mature lithium-ion batteries(LIBs).Enhancing the electrochemical performance of SIBs requires an in-deep and comprehensive understanding of the improvement strategies and the underlying reaction mechanism elucidated by in situ techniques.In this review,commonly applied in situ techniques,for instance,transmission electron microscopy(TEM),Raman spectroscopy,X-ray diffraction(XRD),and X-ray absorption near-edge structure(XANES),and their applications on the representative cathode and anode materials with selected samples are summarized.We discuss the merits and demerits of each type of material,strategies to enhance their electrochemical performance,and the applications of in situ characterizations of them during the de/sodiation process to reveal the underlying reaction mechanism for performance improvement.We aim to elucidate the composition/structure-per formance relationship to provide guidelines for rational design and preparation of electrode materials toward high electrochemical performance.展开更多
Polymethoxylated flavones(PMFs),the main form of flavones in citrus,are derived from the flavone branch of the flavonoid biosynthesis pathway.Flavone synthases(FNSs)are enzymes that catalyze the synthesis of flavones ...Polymethoxylated flavones(PMFs),the main form of flavones in citrus,are derived from the flavone branch of the flavonoid biosynthesis pathway.Flavone synthases(FNSs)are enzymes that catalyze the synthesis of flavones from flavanones.However,the FNS in citrus has not been characterized yet.Here,we identified two type II FNSs,designated CitFNSII-1 and CitFNSII-2,based on phylogenetics and transcriptome analysis.Both recombinant CitFNSII-1 and CitFNSII-2 proteins directly converted naringenin,pinocembrin,and liquiritigenin to the corresponding flavones in yeast.In addition,transient overexpression of CitFNSII-1 and CitFNSII-2,respectively,in citrus peel significantly enhanced the accumulation of total PMFs,while virus-induced CitFNSII-1 and CitFNSII-2 genes silencing simultaneously significantly reduced the expression levels of both genes and total PMF content in citrus seedlings.CitFNSII-1 and CitFNSII-2 presented distinct expression patterns in different cultivars as well as different developmental stages.Methyl salicylate(MeSA)treatment reduced the CitFNSII-2 expression as well as the PMFs content in the peel of Citrus sinensis fruit but did not affect the CitFNSII-1 expression.These results indicated that both CitFNSII-1 and CitFNSII-2 participated in the flavone biosynthesis in citrus while the regulatory mechanism governing their expression might be specific.Our findings improved the understanding of the PMFs biosynthesis pathway in citrus and laid the foundation for further investigation on flavone synthesis regulation.展开更多
Correction to:J.For.Res.(2022)33:689–698 https://doi.org/10.1007/s11676-021-01335-7 In the Original Publication,the text“Acknowledgements sdfkjds”has been inadvertently appeared in the paper.The Original article ha...Correction to:J.For.Res.(2022)33:689–698 https://doi.org/10.1007/s11676-021-01335-7 In the Original Publication,the text“Acknowledgements sdfkjds”has been inadvertently appeared in the paper.The Original article has been corrected.展开更多
Background and Objectives: The species to the Lannea genus are trees, shrubs with compound leaves. Thus, individuals called atypical Lannea with single leaves and of socio-economic interests have been identified in th...Background and Objectives: The species to the Lannea genus are trees, shrubs with compound leaves. Thus, individuals called atypical Lannea with single leaves and of socio-economic interests have been identified in the central plateau region (Burkina Faso). This study aimed to contribute to the identification of atypical species. Material and Methods: The Polymerase Chain Reaction (PCR) method using specific primers was performed and consisted of extracting DNA from young leaves of Lannea individuals, amplifying and then sequencing portions of discriminating DNA (matK, rbcL and rps16). Results: It was shown that individuals belong to the Lannea genus, but are subdivided into three subgroups: a first subgroup containing Lannea microcarpa and two subgroups with no previously identified Lannea species. Conclusion: These atypical individuals are ecotypes or mutants of Lannea microcarpa.展开更多
基金supported by the National Key Research and Development Program of China:Investigate the mechanism of formation and control technologies of Chinese traditional and ethnic food quality(2021YFD2100100)。
文摘Oyster(Crassostrea gigas),the main ingredient of oyster sauce,has a strong umami taste.In this study,three potential umami peptides,FLNQDEEAR(FR-9),FNKEE(FE-5),and EEFLK(EK-5),were identified and screened from the alcoholic extracts of the oyster using nano-HPLC-MS/MS analysis,i Umami-Scoring Card Method(i Umami-SCM)database and molecular docking(MD).Sensory evaluation and electronic tongue analysis were further used to confirm their tastes.The threshold of the three peptides ranged from 0.38 to 0.55 mg/m L.MD with umami receptors T1R1/T1R3 indicated that the electrostatic interaction and hydrogen bond interaction were the main forces involved.Besides,the Phe592 and Gln853 of T1R3 were the primary docking site for MD and played an important role in umami intensity.Peptides with two Glu residues at the terminus had stronger umami,especially at the C-terminus.These results contribute to the understanding of umami peptides in oysters and the interaction mechanism between umami peptides and umami receptors.
文摘The purpose of this study is to investigate the physicochemical properties of some local varieties of onion (Allium cepa L.) and compare them with an imported variety, all collected in May 2021. Proteins, reducing sugars, lipids, and polyphenol content were estimated according to the AFNOR standardized methods. The determination of calcium, magnesium, iron, sodium, potassium and phosphorus was performed by atomic absorption spectrophotometer coupled with a CCD detector. The results highlighted an average acidity of 0.377% ± 0.002% lower than the value of the imported variety which is 0.520% ± 0.001%. Local varieties have a pH ranging from 6.35 ± 0.003 to 6.42 ± 0.004, while the variety has a pH of 6.36 ± 0.003. The ash and dry matter contents vary respectively from 4.788% ± 0.004% to 8.253% ± 0.003% and 7.945% ± 0.021% to 11.945% ± 0.007% for the local varieties. Moreover, the imported one has ash and dry matter contents of 5.175% ± 0.007% and 10.035% ± 0.021% respectively. The results show that the protein, reducing sugar and lipid contents in the local onion varieties vary respectively from 2.815 ± 0.000 to 15.634 ± 0.001 g·100 g<sup>-1</sup>;4.691 ± 0.001 to 12.596 ± 0.002 g·100 g<sup>-1</sup> and 0.006 ± 0.001 to 0.050 ± 0.057 g·100 g<sup>-1</sup>. Furthermore, the imported variety has a protein, reducing sugar and lipid content of 5.649 ± 0.002;8.565 ± 0.002 g·100 g<sup>-1</sup> and 0.011 ± 0.010 g·100 g<sup>-1</sup> respectively. The maximum levels of total polyphenols are obtained in the imported variety, Bellani and Gandiol, respectively 9.973 ± 0.001, 4.535 ± 0.002, and 3.425 ± 0.006 mg EAG/g of dry matter. The local varieties have a significant calorific intake of between 35.451 ± 0.001 and 112.980 ± 0.003 kcal·100 g<sup>-1</sup> compared to the imported one with an energy value of 56.953 ± 0.001 kcal·100 g<sup>-1</sup> of dry matter. The bulbs of different onion varieties studied have a fairly high content of mineral elements. The potassium content of local varieties is between 502.16 ± 0.06 mg·100 g<sup>-1</sup> and 582.77 ± 0.04 mg·100 g<sup>-1</sup> while the imported variety has a content of 536.62 ± 1.30 mg·100 g<sup>-1</sup>. They note that the local varieties have a better calcium content (249.75 ± 0.07 to 434.20 ± 0.57 mg·100 g<sup>-1</sup>) and magnesium (142.15 ± 0.07 to 162.60 ± 0.42 mg·100 g<sup>-1</sup>) than the imported variety (229.58 ± 0.04 mg·100 g<sup>-1</sup>) except for the varieties White Grano (228.29 ± 0.01 mg·100 g<sup>-1</sup>) and Rouge Amposta (117.00 ± 0.42 mg·100 g<sup>-1</sup>) respectively. These results reveal that Gandiol, Dayo and Orient F1 are nutritionally found better due to their higher antioxidant property, proteins, carbohydrates, and reducing sugar and should be included in diets to supplement our daily allowance needed by the body.
文摘The study conducted at Ndiebene Gandiol 1 school in Senegal has unveiled serious environmental and public health challenges. The wastewater analysis revealed high levels of Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and fecal coliforms, signaling potential risks to the well-being of students and staff. This situation mirrors a wider issue in rural educational settings, where inadequate sanitation persists. Intensive wastewater treatment options are known for their effectiveness against high pollutant loads but are resource-intensive in both energy and cost. Conversely, extensive treatment systems, while requiring more land, provide a sustainable alternative by harnessing natural processes for pollutant removal. The research suggests a hybrid treatment approach could serve the school’s needs, balancing the robust capabilities of intensive methods with the ecological benefits of extensive systems. Such a solution would need to be tailored to the specific environmental, financial, and logistical context of the school, based on comprehensive feasibility studies and stakeholder engagement. This study’s findings underscore the urgency of addressing sanitation in schools, as it is intrinsically linked to the health and academic success of students. Quick, effective, and long-term strategies are vital to secure a healthier and more prosperous future for the youth. With proper implementation, the school can transform its sanitation facilities, setting a precedent for rural educational institutions in Senegal and similar contexts globally.
基金supported by the National Key R&D Program of China (2018YFD0901106)the Wenzhou Major Science and Technology Project (ZN2021002)the Ningbo“3315 series program”for high-level talents (2020B-34-G)。
文摘In this paper,tannic acid(TA)and Fe~(3+)were added to form a layer of metal-polyphenol network structure on the surface of the nanoparticles which were fabricated by zein and carbon quantum dots(CQDs)encapsulating phlorotannins(PTN).pH-Responsive nanoparticles were prepared successfully(zein-PTN-CQDs-Fe-~Ⅲ).Further,the formation of composite nanoparticles was confirmed by a series of characterization methods.The zeta-potential and Fourier transform infrared spectroscopy data proved that electrostatic interaction and hydrogen bonding are dominant forces to form nanoparticles.The encapsulation efficiency(EE)revealed that metal-polyphenol network structure could improve the EE of PTN.Thermogravimetric analysis and differential scanning calorimetry experiment indicated the thermal stability of zein-PTN-CQDs-Fe~Ⅲnanoparticles increased because of metal-polyphenol network structure.The pH-responsive nanoparticles greatly increased the release rate of active substances and achieved targeted release.
基金supported by the National Natural Science Foundation of China(52203364,52188101,52020105010)the National Key R&D Program of China(2021YFB3800300,2022YFB3803400)+2 种基金the Strategic Priority Research Program of Chinese Academy of Science(XDA22010602)the China Postdoctoral Science Foundation(2022M713214)the China National Postdoctoral Program for Innovative Talents(BX2021321)。
文摘Metal-ion batteries(MIBs),including alkali metal-ion(Li^(+),Na^(+),and K^(3)),multi-valent metal-ion(Zn^(2+),Mg^(2+),and Al^(3+)),metal-air,and metal-sulfur batteries,play an indispensable role in electrochemical energy storage.However,the performance of MIBs is significantly influenced by numerous variables,resulting in multi-dimensional and long-term challenges in the field of battery research and performance enhancement.Machine learning(ML),with its capability to solve intricate tasks and perform robust data processing,is now catalyzing a revolutionary transformation in the development of MIB materials and devices.In this review,we summarize the utilization of ML algorithms that have expedited research on MIBs over the past five years.We present an extensive overview of existing algorithms,elucidating their details,advantages,and limitations in various applications,which encompass electrode screening,material property prediction,electrolyte formulation design,electrode material characterization,manufacturing parameter optimization,and real-time battery status monitoring.Finally,we propose potential solutions and future directions for the application of ML in advancing MIB development.
基金supported by the National Natural Science Foundation of China(Grant No.62373224)the Scientific Research Foundation of Nanjing Institute of Technology(Grant No.YKJ202212)+1 种基金the Nanjing Overseas Educated Personnel Science and Technology Innovation Projectthe Open Research Fund of Jiangsu Collaborative Innovation Center for Smart Distribution Network,Nanjing Institute of Technology(Grant No.XTCX202307)。
文摘Lithium-ion batteries are widely recognized as a crucial enabling technology for the advancement of electric vehicles and energy storage systems in the grid.The design of battery state estimation and control algorithms in battery management systems is usually based on battery models,which interpret crucial battery dynamics through the utilization of mathematical functions.Therefore,the investigation of battery dynamics with the purpose of battery system identification has garnered considerable attention in the realm of battery research.Characterization methods in terms of linear and nonlinear response of lithium-ion batteries have emerged as a prominent area of study in this field.This review has undertaken an analysis and discussion of characterization methods,with a particular focus on the motivation of battery system identification.Specifically,this work encompasses the incorporation of frequency domain nonlinear characterization methods and dynamics-based battery electrical models.The aim of this study is to establish a connection between the characterization and identification of battery systems for researchers and engineers specialized in the field of batteries,with the intention of promoting the advancement of efficient battery technology for real-world applications.
基金supported by the National Key Research and Development Program of China(No.2021YFC3001302)the National Natural Science Foundation of China(No.52274072).
文摘Shearing dislocation is a common failure type for rock–backfill interfaces because of backfill sedimentation and rock strata movement in backfill mining goaf.This paper designed a test method for rock–backfill shearing dislocation.Using digital image techno-logy and three-dimensional(3D)laser morphology scanning techniques,a set of 3D models with rough joint surfaces was established.Further,the mechanical behavior of rock–backfill shearing dislocation was investigated using a direct shear test.The effects of interface roughness on the shear–displacement curve and failure characteristics of rock–backfill specimens were considered.The 3D fractal dimen-sion,profile line joint roughness coefficient(JRC),profile line two-dimensional fractal dimension,and the surface curvature of the frac-tures were obtained.The correlation characterization of surface roughness was then analyzed,and the shear strength could be measured and calculated using JRC.The results showed the following:there were three failure threshold value points in rock–backfill shearing dis-location:30%–50%displacement before the peak,70%–90%displacement before the peak,and 100%displacement before the peak to post-peak,which could be a sign for rock–backfill shearing dislocation failure.The surface JRC could be used to judge the rock–backfill shearing dislocation failure,including post-peak sliding,uniform variations,and gradient change,corresponding to rock–backfill disloca-tion failure on the field site.The research reveals the damage mechanism for rock–backfill complexes based on the free joint surface,fills the gap of existing shearing theoretical systems for isomerism complexes,and provides a theoretical basis for the prevention and control of possible disasters in backfill mining.
基金supported by the National Natural Science Foundation of China (32102605)the Agricultural Science and Technology Innovation Program under Grant (CAAS-ASTIP-2020IAR)the Earmarked Fund for CARS (CARS-44)。
文摘Food allergens are mainly naturally-occurring proteins with immunoglobulin E(IgE)-binding epitopes.Understanding the structural and immunogenic characteristics of allergenic proteins is essential in assessing whether and how food processing techniques reduce allergenicity.We here discuss the impacts of food processing technologies on the modification of physicochemical,structural,and immunogenic properties of allergenic proteins.Detection techniques for characterizing changes in these properties of food allergens are summarized.Food processing helps to reduce allergenicity by aggregating or denaturing proteins,which masks,modifies,or destroys antigenic epitopes,whereas,it cannot eliminate allergenicity completely,and sometimes even improves allergenicity by exposing new epitopes.Moreover,most food processing techniques have been tested on purified food allergens rather than food products due to potential interference of other food components.We provide guidance for further development of processing operations that can decrease the allergenicity of allergenic food proteins without negatively impacting the nutritional profile.
基金supported by the National Natural Science Foundation of China(No.31972977)。
文摘Three novel acidic polysaccharide fractions(OFPP-1,OFPP-2,OFPP-3)with different m olecular weights(803.7,555.1 and 414.5 k Da)were isolated from the peeled Opuntia dillenii Haw.fruits by alkali-extraction,graded alcohol precipitation and column chromatography.Structural analysis indicated that OFPPs were pectic polysaccharides consisting of rhamnose,arabinose and galactose residues.The backbone of OFPP-1 consisted of a repeating unit→6-α-D-Galp A-(1→2)-α-L-Rhap-(1→with T-α-D-Galp A-(1→6)-α-D-Galp A-(1→4)-α-D-Glcp-(1→,T-β-D-Xylp-(1→6)-α-D-Galp A-(1→4)-α-D-Glcp-(1→or T-α-D-Galp A-(1→3)-α-L-Araf-(1→as the side chains.The backbone of OFPP-2 consisted of a disaccharide repeating unit→2)-α-L-Rhap-(1→4)-β-D-Galp A-(1→with T-β-L-Araf-(1→as the branches substituted at the O-4 position of→2,4)-α-LRhap-(1→.Whereas the backbone of OFPP-3 was→2,4)-α-L-Rhap-(1→2)-α-L-Rhap-(1→3)-β-L-Araf-(1→or→2,4)-α-L-Rhap-(1→2)-α-L-Rhap-(1→4)-β-D-Galp A-(1→,which was branched at the O-4 position of→2,4)-α-L-Rhap-(1→.Moreover,these three polysaccharide fractions could protect Huh-7 cells against H2O2-induced oxidative stress to different extents by decreasing the MDA content and increasing the SOD,CAT,GSH-Px activities and the GSH level in the Huh-7 cells.These results suggest that OFPPs have the potential to be used as natural antioxidants.
基金supported by the National Key R&D Program of China(Grant No.2021YFB2206503)National Natural Science Foundation of China(Grant No.62274159)+1 种基金CAS Project for Young Scientists in Basic Research(Grant No.YSBR-056)the“Strategic Priority Research Program”of the Chinese Academy of Sciences(Grant No.XDB43010102).
文摘Ex situ characterization techniques in molecular beam epitaxy(MBE)have inherent limitations,such as being prone to sample contamination and unstable surfaces during sample transfer from the MBE chamber.In recent years,the need for improved accuracy and reliability in measurement has driven the increasing adoption of in situ characterization techniques.These techniques,such as reflection high-energy electron diffraction,scanning tunneling microscopy,and X-ray photoelectron spectroscopy,allow direct observation of film growth processes in real time without exposing the sample to air,hence offering insights into the growth mechanisms of epitaxial films with controlled properties.By combining multiple in situ characterization techniques with MBE,researchers can better understand film growth processes,realizing novel materials with customized properties and extensive applications.This review aims to overview the benefits and achievements of in situ characterization techniques in MBE and their applications for material science research.In addition,through further analysis of these techniques regarding their challenges and potential solutions,particularly highlighting the assistance of machine learning to correlate in situ characterization with other material information,we hope to provide a guideline for future efforts in the development of novel monitoring and control schemes for MBE growth processes with improved material properties.
文摘Herein, we report some characteristics of the clayey materials (CMs) collected from Kaliwa (C1), Kabé (C2) and Malo (C3) district in N’Djamena (Chad). Three samples were characterized applying XRF, XRD, FTIR, SEM. In addition, TGA/DSC were performed to control decomposition/mass loss and show phase transitions respectively of CMs. Geochemical analysis by XRF reveals the following minerals composition: SiO<sub>2</sub> (~57% - 66%), Al<sub>2</sub>O<sub>3 </sub>(~13% - 15%), Fe<sub>2</sub>O<sub>3</sub> (~6% - 10%), TiO<sub>2</sub> (~1% - 2%) were the predominant oxides with a reduced proportion in C1, and (~7%) of fluxing agents (K<sub>2</sub>O, CaO, Na<sub>2</sub>O). Negligible and trace of MgO (~1%) and P<sub>2</sub>O<sub>5</sub> was noted. The mineralogical composition by XRD shows that, C1, C2 and C3 display close mineralogy with: Quartz (~50%), feldspar (~20%) as non-clay minerals, whereas clays minerals were mostly kaolinite (~15%), illite (~5%) and smectite (~10%). FTIR analysis exhibits almost seemingly similar absorption bands characteristic of hydroxyls elongation, OH valence vibration of Kaolinite and stretching vibration of some Metal-Oxygen bond. SEM micrographs of the samples exhibit microstructureformed by inter-aggregates particles with porous cavities. TGA/DSCconfirm the existence of quartz (570˚C to 870˚C), carbonates (600˚C - 760˚C), kaolinite (569˚C - 988˚C), illite (566˚C - 966˚C), MgO (410˚C - 720˚C) and smectite (650˚C - 900˚C). The overall characterization indicates that, these clayey soils exhibit good properties for ceramic application.
文摘A Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. By combining well seismic analysis, the middle section of Shahejie-3 is divided into high-level system tract and forced lake retreat system tract, corresponding to the II oil formation and I oil formation, respectively. Using sequence stratigraphy methods, based on seismic profiles and drilling lithological cycles, the high stand system tract is divided into 5 stages of delta progradation. The first and second stages are high angle S-type progradation with large sedimentary thickness, the third stage is oblique progradation, and the fourth and fifth stages are S-oblique composite progradation;By combining seismic data, we characterized the large-scale (8 small-scale) progradation bodies of 5 periods, clarified the distribution characteristics of reservoir planes, and laid the foundation for the later exploration of oilfield potential.
文摘This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.
文摘BACKGROUND Artificial intelligence(AI)has potential in the optical diagnosis of colorectal polyps.AIM To evaluate the feasibility of the real-time use of the computer-aided diagnosis system(CADx)AI for ColoRectal Polyps(AI4CRP)for the optical diagnosis of diminutive colorectal polyps and to compare the performance with CAD EYE^(TM)(Fujifilm,Tokyo,Japan).CADx influence on the optical diagnosis of an expert endoscopist was also investigated.METHODS AI4CRP was developed in-house and CAD EYE was proprietary software provided by Fujifilm.Both CADxsystems exploit convolutional neural networks.Colorectal polyps were characterized as benign or premalignant and histopathology was used as gold standard.AI4CRP provided an objective assessment of its characterization by presenting a calibrated confidence characterization value(range 0.0-1.0).A predefined cut-off value of 0.6 was set with values<0.6 indicating benign and values≥0.6 indicating premalignant colorectal polyps.Low confidence characterizations were defined as values 40%around the cut-off value of 0.6(<0.36 and>0.76).Self-critical AI4CRP’s diagnostic performances excluded low confidence characterizations.RESULTS AI4CRP use was feasible and performed on 30 patients with 51 colorectal polyps.Self-critical AI4CRP,excluding 14 low confidence characterizations[27.5%(14/51)],had a diagnostic accuracy of 89.2%,sensitivity of 89.7%,and specificity of 87.5%,which was higher compared to AI4CRP.CAD EYE had a 83.7%diagnostic accuracy,74.2%sensitivity,and 100.0%specificity.Diagnostic performances of the endoscopist alone(before AI)increased nonsignificantly after reviewing the CADx characterizations of both AI4CRP and CAD EYE(AI-assisted endoscopist).Diagnostic performances of the AI-assisted endoscopist were higher compared to both CADx-systems,except for specificity for which CAD EYE performed best.CONCLUSION Real-time use of AI4CRP was feasible.Objective confidence values provided by a CADx is novel and self-critical AI4CRP showed higher diagnostic performances compared to AI4CRP.
文摘Background: To preserve its nutritional properties, fish must have good sanitary quality. The objective of this study was to investigate some pathogens contaminating smoked, dried, and braised fish marketed in Ouagadougou. Methodology: Potential pathogens of Enterobacteriaceae and Staphylococcus were screened in eight (8) species of processed fish. The investigation of the germs was carried out following the normative methods of microbiology. The identities of the strains were determined by API 20 E (BioMerieux S.A., France) and API STAPH (BioMerieux S.A., France) kits for Enterobacteriaceae and Staphylococcus species respectively. The uidA gene profile in Escherichia coli isolates was determined by simplex PCR. The identity of Staphylococcus aureus was confirmed by amplification of specific 23S rDNA regions and nuc gene profile with PCR. Results: A total of 235 fish samples were analyzed. A diversity of Enterobacteriaceae and Staphylococcus was detected. Twenty species of Enterobacteriaceae were identified among which, the most frequent were Escherichia coli, Salmonella sp, Raoultella ornithinolytica and Serratia odorifera, respectively in 22.6%, 4.3%, 28.9%, 17.4% of the samples analyzed. However, eleven species of Staphylococcus were identified among which, Staphylococcus xylosus, Staphylococcus aureus, Staphylococcus lugdunensis, and Staphylococcus sciuri were the most frequent with respective percentages of 47.7%, 23.4%, 12.8% and 10.6% of samples. For all the samples, the species frequently isolated were: Raoultella ornithinolytica, Escherichia coli, Serratia odorifera, Staphylococcus aureus, Staphylococcus xylosus, and Staphylococcus lugdunensis. The uidA gene specific to Escherichia coli was detected in 82.85% of strains (29/35). Amplification of the specific 23S rDNA region using staur primers was observed in 98% (49/50) of the isolated Staphylococcus aureus strains and the nuc gene was detected in 86% of Staphylococcus aureus strains. Conclusion: The isolated bacteria are potential pathogens involved in foodborne illnesses and intoxications. Effective sanitary safety systems must be implemented to guarantee the sanitary quality of fish supplied to consumers.
基金Taishan Youth Scholar Program of Shandong ProvinceNational Natural Science Foundation of China,Grant/Award Numbers:21972058,21975110,22088102,51825205+3 种基金Postgraduate Practice Research Innovation Program of Jiangsu Province,Grant/Award Number:SJCX21_1707CAS Project for Young Scientists in Basic Research,Grant/Award Number:YSBR‐004DNL Cooperation Fund,CAS,Grant/Award Number:DNL202016National Key Projects for Fundamental Research and Development of China,Grant/Award Number:2018YFB1502002。
文摘Photocatalytic water splitting is beneficial for the effective mitigation of global energy and environmental crises.Owing to multi-exciton generation,impressive light harvesting,and excellent photochemical properties,the quantum dot(QD)-based catalysts reveal a considerable potential in photocatalytic hydrogen(H_(2))production compared with bulk competitors.In this review,we summarize the recent advances in QDs for photocatalytic H_(2) production by enumerating different synthetic and characterization strategies for QDs.Various QDs-based photocatalysts are introduced and summarized in categories,and the role of different QDs in varied systems,as well as the mechanism and key factors that enhance the photocatalytic H_(2) generation performance,is discussed.Finally,conclusions and future perspectives in the exploration of highly efficient QDs-based photocatalysts for innovative applications are highlighted.
基金supported by the National Natural Science Foundation of China(22005130,21925404,21902137,21991151,and 22021001)the National Key Research and Development Program of China(2019YFA0705400 and 2020YFB1505800)the Natural Science Foundation of Fujian Province of China(2021J01988)。
文摘Energy storage is an ever-growing global concern due to increased energy needs and resource exhaustion.Sodium-ion batteries(SIBs)have called increasing attention and achieved substantial progress in recent years owing to the abundance and even distribution of Na resources in the crust,and the predicted low cost of the technique.Nevertheless,SIBs still face challenges like lower energy density and inferior cycling stability compared to mature lithium-ion batteries(LIBs).Enhancing the electrochemical performance of SIBs requires an in-deep and comprehensive understanding of the improvement strategies and the underlying reaction mechanism elucidated by in situ techniques.In this review,commonly applied in situ techniques,for instance,transmission electron microscopy(TEM),Raman spectroscopy,X-ray diffraction(XRD),and X-ray absorption near-edge structure(XANES),and their applications on the representative cathode and anode materials with selected samples are summarized.We discuss the merits and demerits of each type of material,strategies to enhance their electrochemical performance,and the applications of in situ characterizations of them during the de/sodiation process to reveal the underlying reaction mechanism for performance improvement.We aim to elucidate the composition/structure-per formance relationship to provide guidelines for rational design and preparation of electrode materials toward high electrochemical performance.
基金This research was supported by the China Postdoctoral Science Foundation(2021 M700124 and 2021 M692845)the National Natu-ral Science Foundation of China(32072132)the Fundamental Research Funds for the Central Universities(K20220104).
文摘Polymethoxylated flavones(PMFs),the main form of flavones in citrus,are derived from the flavone branch of the flavonoid biosynthesis pathway.Flavone synthases(FNSs)are enzymes that catalyze the synthesis of flavones from flavanones.However,the FNS in citrus has not been characterized yet.Here,we identified two type II FNSs,designated CitFNSII-1 and CitFNSII-2,based on phylogenetics and transcriptome analysis.Both recombinant CitFNSII-1 and CitFNSII-2 proteins directly converted naringenin,pinocembrin,and liquiritigenin to the corresponding flavones in yeast.In addition,transient overexpression of CitFNSII-1 and CitFNSII-2,respectively,in citrus peel significantly enhanced the accumulation of total PMFs,while virus-induced CitFNSII-1 and CitFNSII-2 genes silencing simultaneously significantly reduced the expression levels of both genes and total PMF content in citrus seedlings.CitFNSII-1 and CitFNSII-2 presented distinct expression patterns in different cultivars as well as different developmental stages.Methyl salicylate(MeSA)treatment reduced the CitFNSII-2 expression as well as the PMFs content in the peel of Citrus sinensis fruit but did not affect the CitFNSII-1 expression.These results indicated that both CitFNSII-1 and CitFNSII-2 participated in the flavone biosynthesis in citrus while the regulatory mechanism governing their expression might be specific.Our findings improved the understanding of the PMFs biosynthesis pathway in citrus and laid the foundation for further investigation on flavone synthesis regulation.
文摘Correction to:J.For.Res.(2022)33:689–698 https://doi.org/10.1007/s11676-021-01335-7 In the Original Publication,the text“Acknowledgements sdfkjds”has been inadvertently appeared in the paper.The Original article has been corrected.
文摘Background and Objectives: The species to the Lannea genus are trees, shrubs with compound leaves. Thus, individuals called atypical Lannea with single leaves and of socio-economic interests have been identified in the central plateau region (Burkina Faso). This study aimed to contribute to the identification of atypical species. Material and Methods: The Polymerase Chain Reaction (PCR) method using specific primers was performed and consisted of extracting DNA from young leaves of Lannea individuals, amplifying and then sequencing portions of discriminating DNA (matK, rbcL and rps16). Results: It was shown that individuals belong to the Lannea genus, but are subdivided into three subgroups: a first subgroup containing Lannea microcarpa and two subgroups with no previously identified Lannea species. Conclusion: These atypical individuals are ecotypes or mutants of Lannea microcarpa.