In this paper, we present simultaneous multiple pollutant gases （CO2, CO, and NO） measurements by using the non-dispersive infrared （NDIR） technique. A cross-correlation correction method is proposed and used to c...In this paper, we present simultaneous multiple pollutant gases （CO2, CO, and NO） measurements by using the non-dispersive infrared （NDIR） technique. A cross-correlation correction method is proposed and used to correct the cross-interferences among the target gases. The calculation of calibration curves is based on least-square fittings with third-order polynomials, and the interference functions are approximated by linear curves. The pure absorbance of each gas is obtained by solving three simultaneous equations using the fitted interference functions. Through the interference correction, the signal created at each filter channel only depends on the absorption of the intended gas. Gas mixture samples with different concentrations of CO2, CO, and NO are pumped into the sample cell for analysis. The results show that the measurement error of each gas is less than 4.5%.展开更多
The characterization of these molecularly imprinted polymers is essential to understanding their binding dynamics and structural properties. Through the analysis of the current research, it is found that there are ove...The characterization of these molecularly imprinted polymers is essential to understanding their binding dynamics and structural properties. Through the analysis of the current research, it is found that there are overlaps in the methods used by scholars. The Langmuir equation is frequently applied to model the adsorption isotherms of MIPs, providing critical insight into the capacity and affinity of the binding sites. Infrared Spectroscopy (IR) plays a crucial role in identifying the functional groups involved in the imprinting process and confirming the successful formation of specific binding sites. UV-visible spectrophotometry is employed to monitor the absorption characteristics of the polymers, offering data on the interactions between the template molecules and the polymer matrix. Transmission Electron Microscopy (TEM) provides detailed visualization of the internal structure of MIPs at the nanoscale, revealing the morphology and size of the imprinted cavities. Thermogravimetric Analysis (TGA) assesses the thermal stability and composition of the polymers, identifying decomposition patterns that are indicative of the material’s robustness under different conditions. Finally, the Laser Particle Size Analyzer is used to measure the size distribution of the polymer particles, which is critical for determining the uniformity and efficiency of the imprinting process. The six characterization methods discussed in this paper provide a comprehensive understanding of MIP, and it is hoped that in the future, more optimized design solutions will emerge and their applications in various fields will be enhanced.展开更多
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2009AA063006)the National Natural Science Foundation of China (Grant No. 40805015)the Excellent Youth Scientific Foundation of Anhui Province, China (Grant No. 10040606Y28)
文摘In this paper, we present simultaneous multiple pollutant gases （CO2, CO, and NO） measurements by using the non-dispersive infrared （NDIR） technique. A cross-correlation correction method is proposed and used to correct the cross-interferences among the target gases. The calculation of calibration curves is based on least-square fittings with third-order polynomials, and the interference functions are approximated by linear curves. The pure absorbance of each gas is obtained by solving three simultaneous equations using the fitted interference functions. Through the interference correction, the signal created at each filter channel only depends on the absorption of the intended gas. Gas mixture samples with different concentrations of CO2, CO, and NO are pumped into the sample cell for analysis. The results show that the measurement error of each gas is less than 4.5%.
文摘The characterization of these molecularly imprinted polymers is essential to understanding their binding dynamics and structural properties. Through the analysis of the current research, it is found that there are overlaps in the methods used by scholars. The Langmuir equation is frequently applied to model the adsorption isotherms of MIPs, providing critical insight into the capacity and affinity of the binding sites. Infrared Spectroscopy (IR) plays a crucial role in identifying the functional groups involved in the imprinting process and confirming the successful formation of specific binding sites. UV-visible spectrophotometry is employed to monitor the absorption characteristics of the polymers, offering data on the interactions between the template molecules and the polymer matrix. Transmission Electron Microscopy (TEM) provides detailed visualization of the internal structure of MIPs at the nanoscale, revealing the morphology and size of the imprinted cavities. Thermogravimetric Analysis (TGA) assesses the thermal stability and composition of the polymers, identifying decomposition patterns that are indicative of the material’s robustness under different conditions. Finally, the Laser Particle Size Analyzer is used to measure the size distribution of the polymer particles, which is critical for determining the uniformity and efficiency of the imprinting process. The six characterization methods discussed in this paper provide a comprehensive understanding of MIP, and it is hoped that in the future, more optimized design solutions will emerge and their applications in various fields will be enhanced.
