L-malate is an intermediate of the tricarboxylic acid cycle which is naturally occurred in various microorganisms,and it has been widely applied in polymer,beverage and food,textile,agricultural and pharmaceutical ind...L-malate is an intermediate of the tricarboxylic acid cycle which is naturally occurred in various microorganisms,and it has been widely applied in polymer,beverage and food,textile,agricultural and pharmaceutical industries.Driven by the pursuit of a sustainable economy,microbial production of L-malate has received much attention in last decades.In this review,we focus on the utilization of wastes and/or byproducts as feedstocks for the microbial production of L-malate.Firstly,we present the recent developments on the natural or engineered metabolic pathways that dedicate to the biosynthesis of L-malate,and also provide a comprehensive discussions on developing high-efficient producers.Then,the recent achievements in microbial production of L-malate from various carbon sources were concluded and discussed.Furthermore,some abundant non-food feedstocks which have been used for microbial production of other chemicals were reviewed,as they may be potential candidate feedstock for L-malate production in future.Finally,we outlined the major challenges and proposed further improvements for the production of L-malate.展开更多
The upgrading of diesel oil to produce ethylene rich cracking feedstock is an important and promising technical route to reduce the ratio of diesel to gasoline. In the present work, a hydrocracking catalyst suitable f...The upgrading of diesel oil to produce ethylene rich cracking feedstock is an important and promising technical route to reduce the ratio of diesel to gasoline. In the present work, a hydrocracking catalyst suitable for selective hydrocracking of straight run diesel oil to produce high-quality ethylene cracking feedstock at low cost was developed, by optimizing the composition of catalyst support materials, using amorphous silicon aluminum and aluminum oxide with high mesopore content as the main support, and modified Y zeolite with excellent aromatic ring opening selectivity as the acidic component. The catalyst has in-depth characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, N<sub>2</sub>-low temperature adsorption-desorption, NH<sub>3</sub>-temperature-programmed desorption, and IR techniques. And its catalytic cracking straight run diesel oil performance was evaluated. The results show that the prepared catalyst has high polycyclic aromatic hydrocarbon ring opening cracking selectivity. However, alkanes retained in diesel distillates can achieve the goal of producing more ethylene cracking feedstocks with low BMCI value under low and moderate pressure conditions. This work may shed significant technical insight for oil refining transformation.展开更多
Biochar is increasingly proposed as a soil amendment, with reports of benefits to soil physical, chemical and biological properties. In this study, different biochars were produced from 6 feedstocks, including straw a...Biochar is increasingly proposed as a soil amendment, with reports of benefits to soil physical, chemical and biological properties. In this study, different biochars were produced from 6 feedstocks, including straw and poultry manure, at 3 pyrolysis temperatures (200, 300 and 500℃) and then added separately to a calcareous soil. Their effects on soil properties and maize growth were evaluated in a pot experiment. The biochars derived from crop straw had much higher C but smaller N concentrations than those derived from poultry manure. Carbon concentrations, pH and EC values increased with increasing pyrolysis temperature. Biochar addition resulted in increases in mean maize dry matter of 12.73% and NPK concentrations of 30, 33 and 283%, respectively. Mean soil pH values were increased by 0.45 units. The biochar-amended soils had 44, 55, 254 and 537% more organic C, total N, Olsen-P and available K, respectively, than the control on average. Both feedstocks and pyrolysis temperature determined the characteristics of the biochar. Biochars with high mineral concentrations may act as mineral nutrient supplements.展开更多
Nanocrystalline NiCrC alloy powders with a qualified particle size distribution for thermal spraying were synthesized using the cryogenic ball milling (cryomilling) method. The morphology, microstructure, size distr...Nanocrystalline NiCrC alloy powders with a qualified particle size distribution for thermal spraying were synthesized using the cryogenic ball milling (cryomilling) method. The morphology, microstructure, size distribution, and phase transformation of the powders were characterized by scanning electron microscopy (SEM), laser scattering for particle size analysis, X-ray diffraction (XRD), and transmission electron microscopy (TEM). After cryomilling for 20 h, the average grain size of the as-milled powders approached a constant value of 30 nm by XRD measurement. The average particle size slightly increased from 17.5 to 20.3 μm during the 20-h milling. About 90vol% of the powders satisfied the requirement for thermal spraying with the particle dimension of 10-50 μm, and most of the powders exhibited spherical morphology, which were expected to have good fluidity during thermal spraying. The Cr2O3 phase formed during the cryornilling process as revealed in the XRD spectra, which was expected to enhance the thermal stability of the as-milled powders during the followed thermal spraying or other heat treatment.展开更多
The rheological behaviors of feedstocks for powder extrusion molding, in the temperature range of 40~80 ℃ and the Newton shear rate of 3~800 s -1 , were studied. The effects of feedstock constitution, shear rate an...The rheological behaviors of feedstocks for powder extrusion molding, in the temperature range of 40~80 ℃ and the Newton shear rate of 3~800 s -1 , were studied. The effects of feedstock constitution, shear rate and temperature on apparent viscosity, shear stress and active energy were investigated. The viscose flow active energy of PEM feedstocks is 15.89~90.77 kJ/mol. Based on this research, the PEM technical parameters have optimized. [展开更多
Cellulosic and agricultural bio-energy crops can be utilized as feedstock source for bio-fuels production and provide environmental benefits such as hydrology, water quality. This study compared potential feedstock yi...Cellulosic and agricultural bio-energy crops can be utilized as feedstock source for bio-fuels production and provide environmental benefits such as hydrology, water quality. This study compared potential feedstock yield and water quality benefit scenarios of six bio-energy crops: Miscanthus (Miscanthus-giganteus), Switchgrass (Panicum virgatum), Johnsongrass (Sorghum halepense), Alfalfa (Medicago sativa L.), Corn (Zea mays), and Soybean {Glycine max (L.) Merr.} at the watershed scale using Soil and Water Assessment Tool (SWAT) model. The SWAT model was calibrated (1998 to 2002) and validated (2003 to 2010) using monthly measured USGS stream flow data. Model was further verified using available monthly sediment yield, and county level NASS corn and soybean yield data within the watershed. The long-term average annual potential feedstock yield as an alternative energy source was determined the greatest when growing Miscanthus grass scenario (21.9 Mg/ha) followed by Switchgrass (15.2 Mg/ha), Johnsongrass (12.1 Mg/ha), Alfalfa (7 Mg/ha), Corn (5.9 Mg/ha), and Soybean (2.35 Mg/ha). Model results determined the least amount of average annual sediment yield (1.1 Mg/ha) from the Miscanthus grass scenario and the greatest amount (12 Mg/ha) from the corn crop scenario. About 11% less annual average surface water flow from the watershed could be anticipated when converting land areas from soybean to Miscanthus grass. The results of this study suggested that growing Miscanthus grass in the UPRW would have the greatest potential feedstock yield and water quality benefits. The results of this study may help in developing future watershed management programs.展开更多
Kenaf (Hibiscus cannabinus L.) is a warm-season annual. Kenaf fibers are commonly used for paper pulp and cordage, but it is also a promising lignocellulosic feedstock for bioenergy production, although optimum plant ...Kenaf (Hibiscus cannabinus L.) is a warm-season annual. Kenaf fibers are commonly used for paper pulp and cordage, but it is also a promising lignocellulosic feedstock for bioenergy production, although optimum plant density for biomass production has not been determined for the northern region of the USA. The objective of this study was to determine the best plant density and row spacing of kenaf to maximize biomass yield and chemical composition for biofuel conversion. The experiments were conducted at Fargo and Prosper, ND, in 2010 and 2011. The experiment was a randomized complete block design with a split-plot arrangement where the main plot was tworowspacings (30 and60 cm) and the sub-plot fourplant densities (32, 16, 8, and 4 plants·m-2). Row spacing had a significant effect on both biomass and biofuel yield. Narrower rows had higher biomass and biofuel yield. Maximum biomass and estimated biofuel yield was obtained with the two highest plant densities of 16 and 32 plants·m-2 and fluctuated between 9.45 and 10.22 Mg·ha-1 and 1354 and1464 L·ha-1, respectively. Stem diameter increased with a decrease in plant density. Chemical composition varied with plant density;glucan (27%) and xylan (9.8%) content were lower at the lowest plant density. Ash content was not different among plant densities but it is interesting to mention the very low ash content of kenaf (0.15%). According to the results of this study, it is recommended to plant kenaf at 30-cm rows with a plant density of 16 to 32 plants·m-2 to maximize biomass yield. Kenaf has a tremendous potential as a cellulosic feedstock for biofuel and green chemicals in the Northern Great Plains because of high biomass yield and low ash content.展开更多
基金This work was supported by the National Key R&D Program of China(2018YFA0901500)the National Natural Science Foundation of China(21706124,21727818)+1 种基金the Key Science and Technology Project of Jiangsu Province(BE2016389)the Jiangsu Synergetic Innovation Center for Advanced Bio-Manufacture of China.
文摘L-malate is an intermediate of the tricarboxylic acid cycle which is naturally occurred in various microorganisms,and it has been widely applied in polymer,beverage and food,textile,agricultural and pharmaceutical industries.Driven by the pursuit of a sustainable economy,microbial production of L-malate has received much attention in last decades.In this review,we focus on the utilization of wastes and/or byproducts as feedstocks for the microbial production of L-malate.Firstly,we present the recent developments on the natural or engineered metabolic pathways that dedicate to the biosynthesis of L-malate,and also provide a comprehensive discussions on developing high-efficient producers.Then,the recent achievements in microbial production of L-malate from various carbon sources were concluded and discussed.Furthermore,some abundant non-food feedstocks which have been used for microbial production of other chemicals were reviewed,as they may be potential candidate feedstock for L-malate production in future.Finally,we outlined the major challenges and proposed further improvements for the production of L-malate.
文摘The upgrading of diesel oil to produce ethylene rich cracking feedstock is an important and promising technical route to reduce the ratio of diesel to gasoline. In the present work, a hydrocracking catalyst suitable for selective hydrocracking of straight run diesel oil to produce high-quality ethylene cracking feedstock at low cost was developed, by optimizing the composition of catalyst support materials, using amorphous silicon aluminum and aluminum oxide with high mesopore content as the main support, and modified Y zeolite with excellent aromatic ring opening selectivity as the acidic component. The catalyst has in-depth characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, N<sub>2</sub>-low temperature adsorption-desorption, NH<sub>3</sub>-temperature-programmed desorption, and IR techniques. And its catalytic cracking straight run diesel oil performance was evaluated. The results show that the prepared catalyst has high polycyclic aromatic hydrocarbon ring opening cracking selectivity. However, alkanes retained in diesel distillates can achieve the goal of producing more ethylene cracking feedstocks with low BMCI value under low and moderate pressure conditions. This work may shed significant technical insight for oil refining transformation.
基金supported by the National Natural Science Foundation of China (41171211)the Special Fund for Agro-Scientific Research in the Public Interest, China (201303095-2)
文摘Biochar is increasingly proposed as a soil amendment, with reports of benefits to soil physical, chemical and biological properties. In this study, different biochars were produced from 6 feedstocks, including straw and poultry manure, at 3 pyrolysis temperatures (200, 300 and 500℃) and then added separately to a calcareous soil. Their effects on soil properties and maize growth were evaluated in a pot experiment. The biochars derived from crop straw had much higher C but smaller N concentrations than those derived from poultry manure. Carbon concentrations, pH and EC values increased with increasing pyrolysis temperature. Biochar addition resulted in increases in mean maize dry matter of 12.73% and NPK concentrations of 30, 33 and 283%, respectively. Mean soil pH values were increased by 0.45 units. The biochar-amended soils had 44, 55, 254 and 537% more organic C, total N, Olsen-P and available K, respectively, than the control on average. Both feedstocks and pyrolysis temperature determined the characteristics of the biochar. Biochars with high mineral concentrations may act as mineral nutrient supplements.
基金supported by the National High-Tech Research and Development Program of China (No.2002AA331080)
文摘Nanocrystalline NiCrC alloy powders with a qualified particle size distribution for thermal spraying were synthesized using the cryogenic ball milling (cryomilling) method. The morphology, microstructure, size distribution, and phase transformation of the powders were characterized by scanning electron microscopy (SEM), laser scattering for particle size analysis, X-ray diffraction (XRD), and transmission electron microscopy (TEM). After cryomilling for 20 h, the average grain size of the as-milled powders approached a constant value of 30 nm by XRD measurement. The average particle size slightly increased from 17.5 to 20.3 μm during the 20-h milling. About 90vol% of the powders satisfied the requirement for thermal spraying with the particle dimension of 10-50 μm, and most of the powders exhibited spherical morphology, which were expected to have good fluidity during thermal spraying. The Cr2O3 phase formed during the cryornilling process as revealed in the XRD spectra, which was expected to enhance the thermal stability of the as-milled powders during the followed thermal spraying or other heat treatment.
文摘The rheological behaviors of feedstocks for powder extrusion molding, in the temperature range of 40~80 ℃ and the Newton shear rate of 3~800 s -1 , were studied. The effects of feedstock constitution, shear rate and temperature on apparent viscosity, shear stress and active energy were investigated. The viscose flow active energy of PEM feedstocks is 15.89~90.77 kJ/mol. Based on this research, the PEM technical parameters have optimized. [
文摘Cellulosic and agricultural bio-energy crops can be utilized as feedstock source for bio-fuels production and provide environmental benefits such as hydrology, water quality. This study compared potential feedstock yield and water quality benefit scenarios of six bio-energy crops: Miscanthus (Miscanthus-giganteus), Switchgrass (Panicum virgatum), Johnsongrass (Sorghum halepense), Alfalfa (Medicago sativa L.), Corn (Zea mays), and Soybean {Glycine max (L.) Merr.} at the watershed scale using Soil and Water Assessment Tool (SWAT) model. The SWAT model was calibrated (1998 to 2002) and validated (2003 to 2010) using monthly measured USGS stream flow data. Model was further verified using available monthly sediment yield, and county level NASS corn and soybean yield data within the watershed. The long-term average annual potential feedstock yield as an alternative energy source was determined the greatest when growing Miscanthus grass scenario (21.9 Mg/ha) followed by Switchgrass (15.2 Mg/ha), Johnsongrass (12.1 Mg/ha), Alfalfa (7 Mg/ha), Corn (5.9 Mg/ha), and Soybean (2.35 Mg/ha). Model results determined the least amount of average annual sediment yield (1.1 Mg/ha) from the Miscanthus grass scenario and the greatest amount (12 Mg/ha) from the corn crop scenario. About 11% less annual average surface water flow from the watershed could be anticipated when converting land areas from soybean to Miscanthus grass. The results of this study suggested that growing Miscanthus grass in the UPRW would have the greatest potential feedstock yield and water quality benefits. The results of this study may help in developing future watershed management programs.
文摘Kenaf (Hibiscus cannabinus L.) is a warm-season annual. Kenaf fibers are commonly used for paper pulp and cordage, but it is also a promising lignocellulosic feedstock for bioenergy production, although optimum plant density for biomass production has not been determined for the northern region of the USA. The objective of this study was to determine the best plant density and row spacing of kenaf to maximize biomass yield and chemical composition for biofuel conversion. The experiments were conducted at Fargo and Prosper, ND, in 2010 and 2011. The experiment was a randomized complete block design with a split-plot arrangement where the main plot was tworowspacings (30 and60 cm) and the sub-plot fourplant densities (32, 16, 8, and 4 plants·m-2). Row spacing had a significant effect on both biomass and biofuel yield. Narrower rows had higher biomass and biofuel yield. Maximum biomass and estimated biofuel yield was obtained with the two highest plant densities of 16 and 32 plants·m-2 and fluctuated between 9.45 and 10.22 Mg·ha-1 and 1354 and1464 L·ha-1, respectively. Stem diameter increased with a decrease in plant density. Chemical composition varied with plant density;glucan (27%) and xylan (9.8%) content were lower at the lowest plant density. Ash content was not different among plant densities but it is interesting to mention the very low ash content of kenaf (0.15%). According to the results of this study, it is recommended to plant kenaf at 30-cm rows with a plant density of 16 to 32 plants·m-2 to maximize biomass yield. Kenaf has a tremendous potential as a cellulosic feedstock for biofuel and green chemicals in the Northern Great Plains because of high biomass yield and low ash content.