A method for stochastic seismic response analysis of non-classically damped structures

A method to calculate the stationary random response of a non-classically damped structure is proposed that features clearly-defined physical meaning and simple expression. The method is developed in the frequency domain. The expression of the proposed method consists of three terms, i.e., modal velocity response, modal displacement response, and coupled (between modal velocity and modal displacement response). Numerical results from the parametric study and three example structures reveal that the modal velocity response term and the coupled term are important to structural response estimates only for a dynamic system with a tuned mass damper. In typical cases, the modal displacement term can provide response estimates with satisfactory accuracy by itself, so that the modal velocity term and coupled term may be ignored without loss of accuracy. This is used to simplify the response computation of non-classically damped structures. For the white noise excitation, three modal correlation coefficients in closed form are derived. To consider the modal velocity response term and the coupled term, a simplified approximation based on white noise excitation is developed for the case when the modal velocity response is important to the structural responses. Numerical results show that the approximate expression based on white noise excitation can provide structural responses with satisfactory accuracy.

THE ANALYTICAL APPROACH FOR LARGE SCALE NON-CLASSICALLY DAMPED DYNAMIC SYSTEM

This paper gives a dynamic decoupling approach for the analysis of large scale non-classically damped system, in which the complex variable computations were completely avoided not only in solving for the eigenvalue problem but also in the calculation of the dynamic response. The analytical approaches for undamped gyroscopic system, non-classically damped system, including the damped gyroscopic system were unified. Very interesting and useful theoretical results, practical algorithms were obtained which are applicable to both non-defective and defective systems.

On precise time integration method for non-classically damped MDOF systems

In the complex mode superposition method, the equations of motion for non-classically damped multiple-degree-of-freedom （MDOF） discrete systems can be transferred into a combination of some generalized SDOF complex oscillators. Based on the state space theory, a precise recurrence relationship for these complex oscillators is set up; then a delicate general solution of non-classically damped MDOF systems, completely in real value form, is presented in this paper. In the proposed method, no calculation of the matrix exponential function is needed and the algorithm is unconditionally stable. A numerical example is given to demonstrate the validity and efficiency of the proposed method.

Range of applicability of real mode superposition approximation method for seismic response calculation of non-classically damped industrial buildings

An industrial building is a non-classically damped system due to the different damping properties of the primary structure and equipment.The objective of this paper is to quantify the range of applicability of the real model superposition approximation method to the seismic response calculation of industrial buildings.The analysis using lumped mass-and-shear spring models indicates that for the equipment-to-structure frequency ratiosγf>1.1 orγf<0.9,the non-classical damping effect is limited,and the real mode superposition approximation method provides accurate estimates.For 0.9<γf<1.1,the system may have a pair of closely spaced frequency modes,and the non-zero off-diagonal damping terms have a non-negligible effect on the damping ratios and mode shape vectors of these modes.For 0.9<γf<1.1 and the equipment-to-structure mass ratiosγm<0.07,the real mode superposition approximation method results in large errors,while the approximation method can provide an accurate estimation for 0.9<γf<1.1 andγm>0.07.Furthermore,extensive parametric analyses are conducted,where both steel structures and reinforced concrete structures with equipment with various damping ratios are considered.Finally,the finite element analysis of a five-story industrial building is adopted to validate the proposed range of applicability.

Perturbation spectrum method for seismic analysis of non-classically damped systems

Fundamental principles from structural dynamics,random theory and perturbation methods are adopted to develop a new response spectrum combination rule for the seismic analysis of non-classically damped systems,such as structure-damper systems. The approach,which is named the perturbation spectrum method,can provide a more accurate evaluation of a non-classically damped system's mean peak response in terms of the ground response spectrum. To account for the effect of non-classical damping,all elements are included in the proposed method for seismic analysis of structure,which is usually ap-proximated by ignoring the off-diagonal elements of the modal damping matrix. Moreover,as has been adopted in the traditional Complete Quadratic Combination (CQC) method,the white noise model is also used to simplify the expressions of perturbation correlation coefficients. Finally,numerical work is performed to examine the accuracy of the proposed method by comparing the approximate results with exact ones and to demonstrate the importance of the neglected off-diagonal elements of the modal damping matrix. In the examined cases,the proposed method shows good agreement with direct time-history integration. Also,the perturbation spectrum method leads to a more efficient and economical calculation by avoiding the integral and complex operation.

Simplifications of CQC method and CCQC method

The response-spectrum mode superposition method is widely used for seismic response analyses of linear systems. In using this method, the complete quadratic combination （CQC） is adopted for classically damped linear systems and the complex complete quadratic combination （CCQC） formula is adopted for non-classically damped linear systems. However, in both cases, the calculation of seismic response analyses is very time consuming. In this paper, the variation of the modal correlation coefficients of displacement, velocity and displacement-velocity with frequency and damping ratios of two modes of interest are studied, Moreover, the calculation errors generated by using CQC and square-root-of-the-sum-of-thesquares （SRSS） methods （or CCQC and CSRSS methods） for different damping combinations are compared. In these analyses, some boundary lines for classically and non-classically damped systems are plotted to distinguish the allowed minimum frequency ratio at given geometric mean of the damping ratios of both modes if their relativity is neglected. Furthermore, the simplified method, which is a special mode quadratic combination method considering only relativity of adjacent modes in CQC method and named simplified CQC or partial quadratic combination （PQC） method for classically damped linear system, is proposed to improve computational efficiency, and the criterion for determination of how many correlated modes should be adopted is proposed. Similarly, the simplified CCQC or complex partial quadratic combination （CPQC） method for the non-classically damped linear system and the corresponding criterion are also deduced. Finally, a numerical example is given to illustrate the applicability, computational accuracy and efficiency of the PQC and CPQC methods.

MATRIX ALGEBRA ALGORITHM OF STRUCTURE RANDOM RESPONSE NUMERICAL CHARACTERISTICS

A new algorithm of structure random response numerical characteristics, namedas matrix algebra algorithm of structure analysis is presented. Using the algorithm, structurerandom response numerical characteristics can easily be got by directly solving linear matrixequations rather than structure motion differential equations. Moreover, in order to solve thecorresponding linear matrix equations, the numerical integration fast algorithm is presented. Thenaccording to the results, dynamic design and life-span estimation can be done. Besides, the newalgorithm can solve non-proportion damp structure response.

Application of an efficient stochastic calculation method on the seismic analysis of an isolated structure

An isolated structure often possesses distinct non-proportional damping characteristics.However,traditional seismic calculation theory and methods are derived based on the assumption that damping is proportional.Based on this drawback,a new,more efficient stochastic calculation method,an improvement on the pseudo-excitation method,is introduced.This method is then applied to the seismic analysis of an isolated structure.By comparing it with the forced decoupling,matrix inversion and iteration methods,it is shown that the presented method can produce accurate results while increasing the efficiency of the stochastic analysis.Moreover,the calculation process of the seismic response of an isolated structure is convergent.Based on the results of the example presented in this paper,the given method is applicable to the seismic analysis of an isolated structure and can be utilized in practice.